Engineering Commons^™

Methods Of Improving Complex Cleaning Of Sand Plugs In Khodjaobad Underground Gas Wells, Abdulaziz Murodov, Muhriddin Muydinov, Saidaziz Khabibullaev, Aziz Abidov

Technical science and innovation

The purpose of the study is to develop recommendations for improving the methods of cleaning complex sand plugs in wells of underground gas storage. To organize the correct and efficient use of underground gas storage, the bottom of wells must be kept clean. The article develops recommendations on the use of optimal methods for cleaning wells from complex sand jams on the example of Khujabad UGS. In addition, recommendations were developed for the operation of production wells in the horizons of the XX-XXI-XXII underground gas storage of Khujabad

Machine Learning Based Critical Resource Allocation In Mixed-Traffic Cellular Networks, Mohamed Nomeir

Theses and Dissertations

The proliferation of cellular networks over the past two decades has encouraged the expansion of their use in many modern applications. These applications involve the use of data traffic of different quality of service (QoS) requirements. Some of these requirements are quite stringent such as in the case of critical Internet of Things (IoT) health care, military and homeland security applications. This situation resulted in imposing a variety of resource allocation requirements on the cellular network operation in a simultaneous manner.

In this thesis, we consider the challenging problem of mixed-traffic resource allocation, or scheduling, in cellular networks. We focus …

A Proper Framework For Studying Noise From Jets With Non-Compact Sources, Woutijn J. Baars, Nathan E. Murray, Charles E. Tinney

Faculty and Student Publications

A quantitative assessment of the acoustic source field produced by a laboratory-scale heated jet with a gas dynamic Mach number of 1.55 and an acoustic Mach number of 2.41 is performed using arrays of microphones that are traversed across the axial and radial plane of the jet's acoustic field. The nozzle contour comprises a method of characteristics shape so that shock-related noise is minimal and the dominant sound production mechanism is from Mach waves. The spatial topography of the overall sound pressure level is shown to be dominated by a distinct lobe residing on the principal acoustic emission path, which …

Saxs-Based Nano-Scale Pore Structure Characteristics Of Coals With Different Metamorphic Degrees, Zhang Yu, Li Yong, Wang Yanbin, Wang Zhuangsen, Zhao Shihu, Han Wenlong

Coal Geology & Exploration

In order to reveal the characteristics of nano-scale pores in coals with different metamorphic degrees, the small-angle X-ray scattering method (SAXS) is used to obtain the porosity, pore size distribution, specific surface area and fractal dimension of 15 samples whose vitrinite reflectance R_max is 0.31%-6.24%, and the low temperature CO₂ and N₂ adsorption DFT model results are used to verify the pore size distribution. The results show: during coalification process, when R_max is < 0.5%, the porosity and the specific surface area of coal increase with the increase of metamorphic degree, the micropores(< 2 nm) content increases seldomly, the mesoporous(2-50 nm) and microporous(50-100 nm) content increase greatly, and the surface of coal is gradually smooth. When R_max=0.5%-1.4%, the porosity and the specific surface area decrease, and each type of pore content is reduced, and the surface of …

Factors Affecting The Attitude Accuracy Of Wireless Electromagnetic Wave Mwd System, Wang Xiaobo

Coal Geology & Exploration

In broken soft coal seams of coal mine where hydraulic driving directional drilling is used, hole collapse and hole wall instability are easy to occur. Electromagnetic wave measurement while drilling system is suitable for gas driving drilling, so it is widely used in broken soft coal seams. The accuracy of drilling trajectory is the key to gas drainage effect in broken soft coal seams. In the use of electromagnetic wave measurement while drilling system, the phenomenon of insufficient accuracy and large error of trajectory measurement appears irregularly. In order to solve this problem, this paper analyzes all the factors that …

Characteristics Of The Shale Gas Reservoirs And Evaluation Of Sweet Spots In Wufeng Formation And Longmaxi Formation In Jingmen Exploration Area, Li Xiaoming, Liu Jirong, Lin Wen, Ma Lihong, Liu Dexun, Chen Yujie

Coal Geology & Exploration

In order to further clarify the resource potential of shale gas from Wufeng Formation to Longmaxi Formation in Jingmen exploration area, sweet spots were selected. The shale in Wufeng Formation and 1th Member of Longmaxi Formation of the well X was taken as the research object in this study. Using sliced kerogen, X-ray diffraction, nuclear magnetic resonance, micro nano CT scanning, geochemical analysis and other testing methods, combined with logging interpretation results, based on the petrology, organic geochemical and mineral composition, physical properties, pore types and structure characteristics and hydrocarbon content, the reservoir characteristics of Wufeng-1^th Member of the …

Analysis Of Organic Matter Maturity Of Sapropel Coal In Oil Layer A Of Haishiwan Mine Field Of Yaojie Mining Area, Song Xiaozhong, Zhang Bingzhong, Lei Ying, Song Yanqiang

Coal Geology & Exploration

The vitrinite reflectance is recognized as the only comparable evaluation index of organic matter maturity of source rock in the exploration and development of oil and gas, shale gas and coalbed methane resources. Current research was done to determine the organic matter maturity of sapropel coal in oil layer A in Haishiwan mine field more accurately. Coal samples were collected from boreholes and observation of the optical characteristics of reflected light and fluorescence microscopic components were studied under the microscope. It was found that there are two different characteristic vitrinites in sapropel coal in oil layer A. One was fluorescent …

Deformation Characteristics Of Coal Measures And Gas Occurrence Law Of Coal Mines In North China, Wang Wei, Wei Yanzhao, Jia Tianrang, Yan Jiangwei

Coal Geology & Exploration

Gas is not only one of the important disaster-causing factors in coal mines, but also an important clean energy. Understanding the deformation characteristics of coal measures and the occurrence of gas is the basis for coal mine gas disaster prevention and coalbed methane development. Taking the North China coal measures as the research object, taking the tectonic evolution and control as the main line, using the theory of plate tectonics, tectonic evolution and step by step control of gas-occurring structures, the deformation characteristics of the North China coal-measures and the law of coal mine gas occurrence were systematically studied. The …

Discussion On The Water-Preserved Coal Mining By Dewatering-Reflooding Water Curtain In Open-Pit Coal Mines, Li Ying, Yang Zhuo, Wu Tong

Coal Geology & Exploration

To suppress the attenuation of groundwater resources caused by drainage and control the influence range of coal mining on groundwater resources, the coal mining technology with water curtain was adopted. Taking an open-pit coal mine as the background, this paper established a sand trough recharge platform to carry out physical experiments, and used a numerical method to simulate the irrigation area, so as to analyze the formation and variation of the dewatering-reflooding water curtain. Physical experiments were carried out to observe the formation of a fixed head boundary by water injection curtain which prevented the expansion of funnel, the influence …

Case Study On The Effects Of Seismic Exploration Beneath The Goafs Of Different Ages, Zhang Zhao, Yin Quanzeng

Coal Geology & Exploration

With the continuous development of coal resources, the upper group of coal in some coal mines has been mined out, and it is urgent to solve the detection problem of the lower group of coal. Affected by the goaf formed by the upper group of coal, the seismic energy absorption and scattering attenuation of the lower group of coal are significant, and the signal-to-noise ratio of the data is low. The detection of the lower group of coal under the goaf by 3D seismic exploration is still in the exploration stage. In this paper, the 3D seismic exploration project of …

Predictive Analysis And Synthesis, Modeling And Control Of Complex Technological Processes And Systems, Zhahongir Sherboyevich Bekqulov

Chemical Technology, Control and Management

Consider the theoretical underpinnings of practically predictive analysis and synthesis, modeling and automatic control of complex chemical technological processes and systems, and the evolution of advanced (or advanced) APC (Advanced Process Control) control of technological processes and industries. The current state of industrial automation systems and the characteristics of their deployment are highlighted. The features of each stage of the analysis and synthesis of APC - advanced process control for complex dynamic objects are disclosed. The real situation and features of the implementation of industrial automation systems of industrial enterprises are reflected.

Virtual Analyzers For Increasing The Intelligence Of Industrial Process Control Systems, Umidjon Abdimajotovich Ruziev Phd, Marufjon Kobuljanovich Shodiev

Chemical Technology, Control and Management

It is shown that the development and implementation of virtual analyzers of the quality of the final industrial products is an effective tool for increasing the efficiency of industrial production. The methodology and stages of development of virtual analyzers for predicting the quality of products, monitoring non-measurable or difficult-to-measure parameters of continuous and periodic technological processes are considered, and issues of supporting and adapting a virtual analyzer during its operation without restructuring are also considered.

Algorithm For Calculating The Parameters Of A Multi-Position Electromagnetic Linear Mechatronic Module, Nazarov Khayriddin Nuritdinovich, Matyokubov Nurbek Rustamovich, Temurbek Omonboyevich Rakhimov

Chemical Technology, Control and Management

Currently, in the world in the field of science, engineering and technology, including in mechatronics and robotics, the creation of multi-coordinate mechatronic systems that perform power and control functions is becoming of paramount importance, this is due to a number of important positive qualities of the systems, such as simplicity and compactness of the design, the possibility of obtaining significant efforts, high accuracy and stability of the establishment of fixed positions, ease of control and high reliability. This article presents the calculation of the parameters of multi-position mechatronic modules based on linear execution elements. In the construction of this model, …

New Transformer Changer Static Characteristics Measuring Angle Silences Difference, Sultan Faizullayevich Аmirov, Nurulla Raxmatullayevich Yuldashev

Chemical Technology, Control and Management

Presented the specific features of the new transformer converter, which measures the difference in angular displacement, and examines the nonlinearity levels of static characteristics, sensitivity and static characteristics. Studies have shown that in a new measuring device, where one of the two moving parts consists of a magnetic conductor made in the form of an Archimedean spiral made of ferromagnetic material, the balance of the magnetic bridge changes not only depending on the angle of rotation of it’s shoulder resistances. the current is disturbed by the change in the magnitude of the combined air gap depending on the angle of …

Prediction Of Fracture Distribution And Evaluation Of Shale Gas Preservation Conditions In Longmaxi Formation In Dongxi Area, Xie Jiatong, Fu Xiaoping, Qin Qirong, Li Hu

Coal Geology & Exploration

Commercial development of shale gas confirmed that mature shale has great potential for exploration, southeast Sichuan is the strategic pilot area of shale gas exploration and development in southern China, cracks are the key factor of shale gas preservation and development deployment, for the structural environment complex and special basin edge area, increasing the difficulty of shale crack research, but also provides a new direction for shale gas exploration and development. As a new field of oil and gas exploration in China, shale gas exploration has not yet developed a mature crack evaluation system. Taking Dongxi area of the southeast …

Study On The Microscopic Mechanism Of The Loess Improved By Quicklime, Xie Xiao, Wang Luyao, Deng Lejuan, Zhang Guowei

Coal Geology & Exploration

To investigate the influence of lime content on loess strength and its microscopic mechanism, different proportions of lime were used to improve loess. Through direct shear test, mercury intrusion porosimetry and scanning electron microscopy, the strength characteristics and microstructure changes of compacted loess and modified loess with different lime contents were analyzed qualitatively and quantitatively, and the microscopic mechanism of lime-improved loess was analyzed in depth. The results show that the shear strength parameters of lime-improved loess increases first and then decreases with the increase of lime contents. The cohesive force and internal friction angle reach the maximum when the …

Design Lifecycle Management Of Technological Processes, Yusuf Shodiyevich Avazov

Chemical Technology, Control and Management

The issues of life cycle management of design processes of complex technological processes are considered. An analysis of works devoted to the automated design of technological processes and industries, product life cycle management, and the use of predominant modeling in design is presented. A structure for the implementation of the design of technological processes is proposed and it’s components are described. An algorithm is proposed to reduce the life cycle of the design of a technological process. The sequence of selection of the most optimal project options with the help of the proposed algorithm is described. It is shown that …

Developing Advanced Process Control System For Manufacturing Processes Using Virtual Analyzer, Elyor Erkinovich Samadov

Chemical Technology, Control and Management

This research reflects outlines the main potential features of Advanced Process Control (APC) systems for improved control of technological processes and production. It is shown developing APC systems using a virtualized analyzer (VA) is a very effective technique to increase the efficiency of industrial production. This research reflects the main steps of generating VA as part of the APC system and also describes the key features of each step-in terms of analyzer synthesis.

Mathematical Modeling Of Processes Of Diagnostics Of Technical And Technological Objects, Azizbek Nodirbekovich Yusupbekov, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

The work is an introduction to the technical diagnostics of technical (or technological) objects. It discloses the basic concepts and definitions of the reliability of dynamic systems as objects of diagnostic reference knowledge and their diagnosis. Structural schemes of diagnosing objects with individual and combined channels of influence are analyzed. Questions of rational construction of base of reference knowledge are stated.

Uncertainty Of The Ultrasonic Method For Determining The Strength Of Concrete, Ortagoli Sharipovich Hakimov, Zamira Khudoyberdiyevna Ernazarova

Chemical Technology, Control and Management

The issues of measuring the strength of concrete by the method of surface sounding by ultrasound are considered. A measurement model and formulas for estimating the total standard measurement uncertainty, information about the standards used, measurement tools and methods, and environmental parameters are given. Information about the estimation of uncertainty in the form of "eight steps", such as: measurement task; mathematical model of measurement; analysis of input values; observation results; correlations; uncertainty budget; expanded uncertainty; measurement result. It has been established that the uncertainty of type B of the ultrasonic method for determining the strength of concrete is much less …

Quality Control Of Combustion Of Gaseous Fuel In Furnaces, Azamat Toirovich Rajabov

Chemical Technology, Control and Management

The issues of research and development of systems for monitoring the availability and quality of the process of fuel combustion in industrial furnaces are interpreted. The perspective of using new elements in control systems - communication sensors for the presence and quality in gas-burning installations and furnaces are shown. A method has been developed to control the optimal aeration coefficient based on the extreme of the total integral amplitude-frequency characteristic of the flame conductivity pulsations, which makes it possible to control the quality characteristics of gas-burner devices and control the ratio of the components of the combustible mixture with high …

Regular Algorithms For Adaptive Identification Of Linear Non-Stationary Systems, H.Z. Igamberdiyev, H.I. Sotvoldiev, U.F Mamirov

Chemical Technology, Control and Management

The article deals with the formation of regular algorithms for adaptive parametric spline identification of linear non-stationary systems. Analyzed the issues of constructing adaptive identification of continuous linear non-stationary systems with monotonic and sign-constant parameters. In this case, in a non-stationary system, the entire observation interval is in some way divided into sub-intervals. Identification is carried out at each of the parameter constancy intervals, while the parameter matrix is re-evaluated for the next interval. The input data of the system are determined with an error depending on the error of approximating the state of the system by splines and approximating …

A Novel Dental Re-Mineralizing Blend Of Hydroxyethyl-Cellulose And Cellulose Nanofibers Oral Film Loaded With Nepheline Apatite Glass: Preparation, Characterization And In Vitro Evaluation Of Re-Mineralizing Effect, Dalia Y. Zaki, Engie M. Safwat, Shaymaa M. Nagi, Haidy N. Salem, Tamer M. Hamdy, Lamiaa M. Moharam, Mohammad L. Hassan, E. M.A. Hamzawy

Chemical and Biochemical Engineering Faculty Research & Creative Works

The present investigation aimed to prepare and evaluate an innovated re-mineralizing oral films made from a blend of hydroxyethyl-cellulose (HEC) and cellulose nanofibers (CNF), loaded with nepheline fluorapatite glass powder. Evaluation of film thickness, folding endurance, disintegration time, surface pH, ions release, together with SEM were carried out. In vitro re-mineralizing effect of the prepared film on demineralized teeth was examined. Results revealed the uniformity in thickness of films, folding endurance more than 300, and the disintegration times more than 24 hrs. The pH values were nearly neutral and high concentrations of calcium and fluoride ions were released. SEM showed …

A 3d Seismic Physical Modeling System Of Large Double Triaxial Air-Supported Positioning And Multichannel Data Acquisition And Its Application, Shi Xianxin, Liu Qiang, Hu Jiwu, Wang Pan, Lian Chenguang, Jia Qian, Zhang Miaomiao, Nie Ailan

Coal Geology & Exploration

As an important technology to study seismic wave propagation characteristics, 3D seismic physical simulation is an effective method to understand the propagation law and response characteristics of seismic waves in complex structures. It has the advantages of more realistic results and no limitation on calculation methods and boundary conditions over numerical simulation. Therefore, it has important applications in the research of the basic law of seismic wave propagation, verification of field seismic exploration methods, design optimization of observation systems, etc. This paper presents a 3D seismic physical modeling system of large double triaxial air-supported positioning and multichannel data acquisition, which …

Experimental Study On Transient Electromagnetic Method With A Conical Source, Yang Haiyan, Liu Zhixin, Zhang Hua, Chen Xiao, Lian Zhe, Wang Ling, Yang Fujie

Coal Geology & Exploration

A new transmitter device-conical source has been proved theoretically to have several advantages for transient electromagnetic sounding. To verify application ability of conical source, two kinds of transmitter devices were designed and made, and the experimental studies on surface and in mine roadway were carried out. By applying high density resistivity achievements in surface experiment, the detecting results using conical source and multi-coils were compared. The results show that the description of strata resistivity with conical source is better than that with multi-coils. One fault was identified and the strike and position of which matches the high density resistivity result …

New Method And Optimization Research On Water Sealing Outside Casing Based On Water-Swelling Rubber For Stratified Pumping, Zheng Xianghua, Yuan Wei, Luo Yunxiang, Cheng Cong

Coal Geology & Exploration

Stratified pumping test is a key technique for hydrogeological exploration. To solve the problems of low efficiency and poor reliability and controllability of the traditional water-sealing methods outside casing for stratified pumping, a water-swelling rubber was developed based on high water absorption of the sodium polyacrylate resin, and a new approach based on water-swelling rubber was proposed and optimized by the response surface methodology in this paper. With the water swelling ratio of the rubber as response index, a surrogate model was constructed by the Box-Behnken experimental design to study the influence of different process parameters, working condition parameters, and …

Numerical Analysis Of The Effect Of Different Soil Types And Water Content On Heat Transfer Performance Of Horizontal Buried Pipes, Zou Hang, Pei Peng, Hao Dingyi, Wang Chen

Coal Geology & Exploration

In order to reveal the heat transfer performance of the horizontal buried pipe heat exchanger in the ground source heat pump system in different soil types, this paper, based on the theoretical knowledge of soil capillary water, combined with the means of numerical simulation, discusses the influence of the difference of three-phase composition in different types of energy storage soil on the heat transfer characteristics of the horizontal buried pipe heat exchanger. The results show that under the cooling condition of 308.15 K, the outlet water temperature of the horizontal pipe in the loam soil decreases to 303.3 K and …

Development And Prospect Of Intelligent Drilling Technology And Equipment For Underground Coal Mines In China, Li Quanxin, Liu Fei, Fang Jun Xi'an Research Institute Co., Ltd., China Coal Technology And Engineering Group Corp., Xi'an 710077, China, Liu Jianlin, Chu Zhiwei

Coal Geology & Exploration

The intelligent drilling technology and equipment are important part of the intelligent construction of coal mine, and it is the advanced technology and equipment urgently needed by coal mine enterprises to further promote the work of reducing personnel and increasing efficiency. The phased achievements of underground intelligent drilling technology and equipment during the 13th five-year plan are systematically summarized, and the development status of key technical equipment such as automatic drilling rig, parameter monitoring of measurement while drilling(MWD) system, rotary steerable system are introduced. The key factors restricting the research and development (R & D) and application of intelligent drilling …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Geochemical Characteristics Of Marine-Continental Transitional Facies Shale And Shale Gas In Linxing Area, Chen Xin, Wu Peng, Gao Jixian, Hu Weiqiang, Ding Wangui, Li Yangbing, Liu Xueqing, Ma Litao, Liu Cheng, Kong Wei, Cao Di, Chen Jianqi, Li Yong

Coal Geology & Exploration

In order to reveal the geochemical characteristics of shale and shale gas on the east edge of Ordos Basin, thin section identification, full rock and clay content, scanning electron microscope, organic carbon, rock pyrolysis, kerogen macerals, and kerogen carbon isotopes were tested, and the gas component and carbon isotopes composition of shale were analyzed. The results show that the mineral component of the transitional facies shale in Linxing area is mainly quartz and clay minerals, containing a small amount of calcite, plagioclase, potassium feldspar, dolomite and pyrite. Affected by the mineral genesis and deposition environment, different mineral components and organic …