Engineering Commons^™

Safety In The Quebec Construction Industry: An Overview Of And Possible Improvements In Hazardous Energy Control Using Lockout On Construction Sites By Electricians, Pipefitters, Refrigeration Mechanics And Construction Millwrights, Damien Burlet-Vienney, Yuvin Chinniah, Ayoub Nokra, Abdallah Ben Mosbah

Études primaires

Lack of proper energy control on construction sites leads to numerous worker fatalities every year. Energy control refers to the concept of lockout and other methods used in particular in North America. The aim of this exploratory research project was to achieve a better understanding of energy control practices in the Quebec construction industry for four trades: electricians, pipefitters, refrigeration mechanics and construction millwrights. For each trade, 10 or so semistructured interviews were conducted by means of an open-ended questionnaire, developed with reference to the current provincial regulatory requirements. The 95 experiences described by the 38 participants were compiled by …

Equilibrium And Kinetic Study On The Biosorption Of Trypan Blue From Aqueous Solutions Using Avocado Seed Powder, Tamer T. El-Idreesy, Omar Khoshala, Amin Firouzi, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

This research aims to investigate the removal of trypan blue dye from aqueous solutions by employing ground avocado seeds powder, a low-cost biowaste adsorbent (biosorbent), under various experimental conditions. The effect of contact time, initial dye concentration, and adsorbent dose on dye removal were studied. The experimental kinetic data were fitted to pseudo-first order and pseudo-second-order kinetic models. Results imply that adsorption of trypan blue on the avocado seed adsorbent nicely followed the pseudo-second-order kinetic model. Equilibrium isotherms were analyzed by Langmuir and Freundlich isotherms, where Langmuir isotherm described the isotherm data with a high-correlation coefficient (R2=0.9948) closer to unity, …

Electrospun Fiber Scaffolds For Engineering Glial Cell Behavior To Promote Neural Regeneration, Devan L. Puhl, Jessica L. Funnell, Derek W. Nelson, Manoj K. Gottipati, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Electrospinning is a fabrication technique used to produce nano-or micro-diameter fibers to generate biocompatible, biodegradable scaffolds for tissue engineering applications. Electro spun fiber scaffolds are advantageous for neural regeneration because they mimic the structure of the nervous system extracellular matrix and provide contact guidance for regenerating axons. Glia are non-neuronal regulatory cells that maintain homeostasis in the healthy nervous system and regulate regeneration in the injured nervous system. Electro spun fiber scaffolds offer a wide range of characteristics, such as fiber alignment, diameter, surface nano topography, and surface chemistry that can be engineered to achieve a desired glial cell response …

Assessing The Comfort Of Earplugs: Development And Validation Of The French Version Of The Coprod Questionnaire, Jonathan Terroir, Nellie Perrin, Pascal Wild, Olivier Doutres, Franck Sgard, Chantal Gauvin, Alessia Negrini

Études primaires

Earplugs are a common form of protection for workers exposed to hazardous noise levels. Their comfort directly impacts the effective protection by influencing their consistent and correct use. Nevertheless, comfort definition may vary according to the studies. Thus, a previous review of the literature has shown that to improve our understanding of perceived comfort and to reduce measurement variability, it is advisable to consider comfort through a multidimensional construct (physical, acoustical, functional and psychological). On this basis, the COPROD (COnfort des PROtections auDitives/COmfort of hearing PROtection Devices) questionnaire was developed. It is intended for people working in noisy environments. Nine …

Techno-Art Of Selariu Supermathematics Functions, Vol. Iii, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

The name of supermathematics (SM) was coined by the late mathematician Prof. em. Dr. doc. eng. Gheorghe Silaş who, at the presentation of the first works in this field, at the First National Conference of Vibrations in Machine Construction, Timişoara, 1978, entitled “EXCENTRIC CIRCULAR FUNCTIONS” declared: “Young man, you didn't just discover some new functions, but a new mathematics, a supermathematics”. Then, at my age of 40, I was as happy as I was when a teenager. And I found, with great satisfaction, that he might be right! In 1978! In 2000, after 22 years, he offered me to write …

Neutroalgebra Theory, Vol. I, Florentin Smarandache, Memet Şahin, Derya Bakbak, Vakkas Uluçay, Abdullah Kargın

Branch Mathematics and Statistics Faculty and Staff Publications

In general, in any field of knowledge, with respect to any structure, one has the following neutrosophic triplet . They were introduced by Smarandache in 2019 and 2020.

1) A classical Structure is a structure whose all elements are characterized by the same given Relationships and Attributes and Laws.

2) A NeutroStructure is a structure that has at least one NeutroRelation or one NeutroAttribute or one NeutroLaw, and no AntiRelation and no AntiAttribute and no AntiLaw.

3) An AntiStructure is a structure that has at least one AntiRelation or one AntiAttribute or one AntiLaw.

As a particular case, in the …

Criticality Based Optimal Cyber Defense Remediation In Energy Delivery Systems, Kamrul Hasan, Sachin Shetty, Md. Sharif Ullah, Amin Hassanzadeh, Tariqul Islam

VMASC Publications

A prioritized cyber defense remediation plan is critical for effective risk management in Energy Delivery System (EDS). Due to the complexity of EDS in terms of heterogeneous nature blending Information Technology (IT) and Operation Technology (OT) and Industrial Control System (ICS), scale and critical processes tasks, prioritized remediations should be applied gradually to protect critical assets. In this work, we propose a methodology for a prioritized cyber risk remediation plan by detecting and evaluating paths to critical nodes in EDS. We propose critical nodes characteristics evaluation based on nodes’ architectural positions, a measure of centrality based on nodes’ connectivity and …

Developing An Institutional Arrangement For A Whole-Of-Government And Whole-Of-Community Approach To Regional Adaptation To Sea Level Rise: The Hampton Roads Pilot Project, Juita-Elena (Wie) Yusuf, J. Gail Nicula, Burton St. John Iii, Meagan M. Jordan, Michelle Covi, Carol Considine, Marina Saitgalina, Joshua Behr

School of Public Service Faculty Publications

Adaptation to sea level rise (SLR) requires coordination among local, state, and federal entities and collaboration across governments, nonprofits, businesses, and residents. This coordination and collaboration are reflected in institutional arrangements associated with a whole-of-government and whole-of-community approach to regional adaptation. This study analyzes the development of an interlocal agreement (ILA), the Hampton Roads Sea Level Rise Preparedness and Resilience Intergovernmental Planning Pilot Project (the Pilot Project), as an example of such an arrangement. This study assesses how factors throughout three phases of ILA development (initiation, implementation, and execution) influence outcomes and effectiveness. Drawing upon participant observation, document analysis, survey …

Transient Behavior Of Drift And Ionization In Atmospheric Pressure Nitrogen Discharge, S. K. Dhali

Electrical & Computer Engineering Faculty Publications

The fluid models are frequently used to describe a non-thermal plasma such as a streamer discharge. The required electron transport data and rate coefficients for the fluid model are parametrized using the local field approximation (LFA) in first order models and the local-mean-energy approximation (LMEA) in second order models. We performed Monte Carlo simulations in Nitrogen gas with step changes in the E/N (reduced electric field) to study the behavior of the transport properties in the transient phase. During the transient phase of the simulation, we extract the instantaneous electron mean energy, which is different from the steady state mean …

Future Implications Of Telehealth In Post-Covid World, Sujatha Alla, Vijay Kumar Chattu

Engineering Management & Systems Engineering Faculty Publications

[Introduction] The recent global pandemic forced telehealth to play a greater role in global healthcare delivery due to limited healthcare accessibility. The advent of innovative communication technologies has made it easier for patients to get services like health assessment, diagnosis, interventions, supervision, and information remotely. Digital imaging, decision support software, virtual reality, machine learning for error reduction, Internet of Things (IoT) such as wearable sensors, assistive robots, advances in data management (tracking, transmission, and storage), real-time analytics or store-and-forward, are some of the dynamic technologies that provide strong evidence-based support to scalable and sustainable telehealth programs.

A Deblurring/Denoising Corrected Scintigraphic Planar Image Reconstruction Model For Targeted Alpha Theory, Charles Ross Schmidtlein, Matthew Maroun, Andrzej Krol, Howard Gifford, Lisa Bodei, Joseph O'Donoghue, Ida Häggström, Yuesheng Xu, Si Li

Mathematics & Statistics Faculty Publications

Scintigraphy is a common nuclear medicine method to image molecular target’s bio-distribution and pharmacokinetics through the use of radiotracers and gamma cameras. The patient’s images are obtained by using a pair of opposing large flat gamma ray detectors equipped with parallel-hole lead or tungsten collimators that preferentially detect gamma-rays that are emitted perpendicular to the plane of the detector. The resulting images form an anterior/posterior (A/P) planar image pairs. The obtained images are contaminated by noise and contain artifacts caused by gamma-ray attenuation, collimator penetration, scatter and other detrimental factors. Post-filtering of the images can reduce the noise, but at …

Time Domain Boundary Element Method Prediction Of Noise Shielding By A Naca 0012 Airfoil, Douglas M. Nark, Fang Q. Hu

Mathematics & Statistics Faculty Publications

As aircraft noise constraints become more stringent and the number/mixture of aircraft configurations grows, it becomes more important to understand the interaction of individual aircraft noise sources with nearby aircraft structures. Understanding these interactions and exploring possible approaches to mitigate or exploit their acoustic impact is essential for overcoming key noise barriers. This paper describes the further validation of a time domain boundary element approach for the prediction of the interactions between incident noise sources and nearby aircraft structures. Predictions were completed for multiple source locations and comparisons of these results with measured data are presented. Overall, very good agreement …

Generic Design Methodology For Smart Manufacturing Systems From A Practical Perspective. Part Ii—Systematic Designs Of Smart Manufacturing Systems, Zhuming Bi, Wen-Jun Zhang, Chong Wu, Chaomin Luo, Lida Xu

Information Technology & Decision Sciences Faculty Publications

In a traditional system paradigm, an enterprise reference model provides the guide for practitioners to select manufacturing elements, configure elements into a manufacturing system, and model system options for evaluation and comparison of system solutions against given performance metrics. However, a smart manufacturing system aims to reconfigure different systems in achieving high-level smartness in its system lifecycle; moreover, each smart system is customized in terms of the constraints of manufacturing resources and the prioritized performance metrics to achieve system smartness. Few works were found on the development of systematic methodologies for the design of smart manufacturing systems. The novel contributions …

Inventions Of Scientists, Engineers And Specialists From Different Countries In The Area Of Nanotechnologies. Part V, Leonid A. Ivanov, Li D. Xu, Konstantin E. Razumeev, Valentina M. Feoktistova, Petr S. Prokopiev

Information Technology & Decision Sciences Faculty Publications

Introduction. Advanced technologies impress people's imagination demonstrating the latest achievements (materials, methods, systems, technologies, devices etc.) that dramatically change the world. This, first of all, concerns nanotechnological inventions designed by scientists, engineers and specialists from different countries. Main part. The article provides an abstract overview of inventions of scientists, engineers and specialists from different countries: Russia, USA, China, Belarus, Italy. The results of the creative activity of scientists, engineers and specialists, including inventions in the field of nanotechnology and nanomaterials allow, when introduced to industry, achieving a significant effect in construction, housing and communal services, and related sectors of the …

A High Efficiency And Low Cost Anpc Inverter Using Hybrid Si/Sic Switches, Dereje Woldegiorgis, Yuheng Wu, Yuqi Wei, H. Alan Mantooth

Electrical Engineering Faculty Publications and Presentations

This paper presents a performance investigation and design optimization of a high efficiency three-level Active Neutral Point Clamped (ANPC) inverter topology using hybrid Si/SiC switches. It uses a modulation strategy that produces a cluster of low frequency switches commutating at fundamental line frequency (realized with Si IGBTs) and high frequency switches commutating at carrier frequency (realized with hybrid Si/SiC switches) to facilitate a tradeoff between the inverter efficiency and cost. A generalized Si/SiC current rating ratio optimization algorithm is presented for the hybrid Si/SiC switches based on the power loss profile of ANPC inverter. This algorithm determines the optimal current …

Two-Dimensional & Three-Dimensional Microarray Cell Culture Using Elastomeric Assembly Substrates, Angel Olivera-Torres

Honors Program: Senior Projects (Public)

Tissue engineering and regenerative medicine represent the collection of all engineering disciplines brought together for the common goal of developing novel ways of growing tissues and organs in the laboratory. Efforts have made it possible to replicate or induce growth of 2D structures in the human body like skin, but the clinical need for on-demand solid organs has yet to be met due to lack of understanding of the variables responsible for organogenesis. Cell-colony heterogeneity, 3D-cellular architecture, bioactive molecules, and crosstalk communication between parenchymal cell populations need to be further investigated, and high-throughput technologies can rapidly increase the rate at …

Establishing Independent Tunability Of The Mechanical And Transport Properties Of Polymer Gels, Lucas Rankin

Master’s Theses

Polymer gels can be used in the fabrication of materials for filtering liquid and gaseous media, solid-state electrolytes, and transdermal medical patches. This diverse range of applications primarily relies on the transport and mechanical properties of polymer gels. Both sets of properties have shown excellent tunability, but typically in a coupled fashion. Establishing the independent tunability of the transport and mechanical properties of polymer gels (using simple, cost-effective methods) is paramount if polymer gels are to be used to their full potential. Specifically, block copolymer gels self-assemble into organized nanoscale networks within the gel solvent, which allows for facile control …

Study Of The Mechanlsm Of Flow-Induced Vibrations Of A Cylinder In Proximity To A Wall, Jonathan M. Chambers

Master’s Theses

Flexible bluff bodies exposed to a uniform fluid flow undergo vibration due to vortex-shedding from the body. This phenomenon is known as vortex-induced vibration (VIV). Structural members, such as cables, conduits, and pipes, are susceptible to VIV. Vortex-induced vibrations result in structural stresses due to elastic structural deformation from the flow-induced loading. Cylindrical structures in proximity to planar surfaces can undergo vortex-induced vibrations when the gap between the cylinder and the planar surfaces is above a critical value. This laboratory study investigated the mechanism of vibration and planar wall proximity effect on the cylinder response to the vortex shedding process. …

An Enumeration Of Nested Networks, Nathan Cornelius

Williams Honors College, Honors Research Projects

Nested networks have several applications in phylogenetics and electrical circuit theory. In many cases, there may exist more than one distinct network which correctly models a given data set. This proposes a combinatorial problem to determine all possible network solutions. In this paper, we partially solve this problem by developing exponential generating functions which enumerate all 1-nested and 2-nested unicyclic networks. We also describe our procedure to directly count all 1-nested and 2-nested networks and provide all 1-nested networks with 7, 8, and 9 terminal nodes.

The Characterization Of Purified Citrate-Coated Cerium Oxide Nanoparticles Prepared Via Hydrothermal Synthesis, Matthew L. Hancock, Robert A. Yokel, Matthew J. Beck, Julie L. Calahan, Travis W. Jarrells, Eric J. Munson, George A. Olaniyan, Eric A. Grulke

Chemical and Materials Engineering Faculty Publications

Hypothesis

Cerium oxide nanoparticles were synthesized using a hydrothermal approach with citric acid as a stabilizing agent. Citric acid adsorption onto the nanoceria particle surface can cease particle formation and create a stable dispersion for an extended shelf life. The product was dialyzed immediately following the synthesis to remove unreacted cerium that could contribute to biological effects. Nanoparticle characterization results are expected to help identify the surface citrate bonding structure.

Experiments

Many characterization techniques were utilized to determine size, morphology, surface properties, and citrate complexation on the nanoceria particle surface. These included transmission electron microscopy, electron energy loss spectroscopy, dynamic …

Leveraging Chemical And Computational Biology To Probe The Cellulose Synthase Complex, B. Kirtley Amos

Theses and Dissertations--Plant and Soil Sciences

Cellular expansion in plants is a complex process driven by the constraint of internal cellular turgor pressure by an expansible cell wall. The main structural element of the cell wall is cellulose. Cellulose is vital to plant fitness and the protein complex that creates it is an excellent target for small molecule inhibition to create herbicides. In the following thesis many small molecules (SMs) from a diverse library were screened in search of new cellulose biosynthesis inhibitors (CBI). Loss of cellular expansion was the primary phenotype used to search for putative CBIs. As such, this was approached in a forward …

Competency-Based Education: A Framework For A More Efficient And Safer Aviation Industry, Flavio A. C. Mendonca, Julius Keller, Brian G. Dillman

Publications

Aircraft design and reliability as well as pilots’ education and training have steadily and significantly improved in the last 20 years. Nevertheless, high-profile accidents still occur, even when the aircraft and related systems are operating adequately. Controlled flight into terrain, runway incursion accidents, and loss of control in flight are examples of mishaps in which inadequate decision-making, poor leadership, and ineffective communication are frequently cited as contributing factors. Conversely, the investigation of accidents (e.g., US Airways Flight 1549, in the U.S. on Jan. 15, 2009) and serious incidents (e.g., TAM Linhas Aereas Flight 3756 in Brazil on June 17, 2011) …

Fluid-Wall Interactions In Pseudopotential Lattice Boltzmann Models, Cheng Peng, Luis F. Ayala, Orlando M. Ayala

Engineering Technology Faculty Publications

Designing proper fluid-wall interaction forces to achieve proper wetting conditions is an important area of interest in pseudopotential lattice Boltzmann models. In this paper, we propose a modified fluid-wall interaction force that applies for pseudopotential models of both single-component fluids and partially miscible multicomponent fluids, such as hydrocarbon mixtures. A reliable correlation that predicts the resulting liquid contact angle on a flat solid surface is also proposed. This correlation works well over a wide variety of pseudopotential lattice Boltzmann models and thermodynamic conditions.

Let's Collaborate! The Importance Of Cybersecurity Pathways And Their Accessibility, Vukica Jovanovic, Otilia Popescu, Murat Kuzlu, Petros Katsioloudis

Engineering Technology Faculty Publications

[Introduction] I am very passionate about inspiring a new generation of the STEM workforce. Going through the engineering pathway myself since 9th grade, I have seen the value of technical education and early career choice. In high school, I learned so much about math and science, but also about the technical and applied aspects of STEM professions. I had one apprenticeship in electrical power and aluminum mill companies where I explored how the concepts from the classes convey to the real world. It was so much easier to learn all the equations and different aspects of technology from the textbook …

Investigation Of Anaerobic Digestion Of The Aqueous Phase From Hydrothermal Carbonization Of Mixed Municipal Solid Waste, Kameron J. Adams, Ben Stuart, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

In 2017, the United States Environmental Protection Agency (EPA) reported that Americans generated over 268 million tons of municipal solid waste (MSW). The majority (52%) of this waste ends up in landfills, which are the third largest source of anthropogenic methane emissions. Improvements in terms of waste management and energy production could be solved by integrating MSW processing with hydrothermal carbonization (HTC) and anaerobic digestion (AD) for converting organic carbon of MSW to fuels. The objectives of this study were to (a) investigate HTC experiments at varying temperatures and residence times (b) evaluate aqueous phase and solids properties, and (c) …

Low-Temperature Gas Plasma Combined With Antibiotics For The Reduction Of Methicillin-Resistant Staphylococcus Aureus Biofilm Both In Vitro And In Vivo, Li Guo, Lu Yang, Yu Qi, Gulimire Niyazi, Jianbao Zheng, Ruobing Xu, Xusong Chen, Jingye Zhang, Wang Xi, Dingxin Liu, Xiaohua Wang, Hailan Chen, Michael G. Kong

Electrical & Computer Engineering Faculty Publications

Biofilm infections in wounds seriously delay the healing process, and methicillin-resistant Staphylococcus aureus is a major cause of wound infections. In addition to inactivating micro-organisms, low-temperature gas plasma can restore the sensitivity of pathogenic microbes to antibiotics. However, the combined treatment has not been applied to infectious diseases. In this study, low-temperature gas plasma treatment promoted the effects of different antibiotics on the reduction of S. aureus biofilms in vitro. Low-temperature gas plasma combined with rifampicin also effectively reduced the S. aureus cells in biofilms in the murine wound infection model. The blood and histochemical analysis demonstrated the biosafety of …

Covid-19 And Biocybersecurity's Increasing Role On Defending Forward, Xavier Palmer, Lucas N. Potter, Saltuk Karahan

Electrical & Computer Engineering Faculty Publications

The evolving nature of warfare has been changing with cybersecurity and the use of advanced biotechnology in each aspect of the society is expanding and overlapping with the cyberworld. This intersection, which has been described as “biocybersecurity” (BCS), can become a major front of the 21st-century conflicts. There are three lines of BCS which make it a critical component of overall cybersecurity: (1) cyber operations within the area of BCS have life threatening consequences to a greater extent than other cyber operations, (2) the breach in health-related personal data is a significant tool for fatal attacks, and (3) health-related misinformation …

Ship Deck Segmentation In Engineering Document Using Generative Adversarial Networks, Mohammad Shahab Uddin, Raphael Pamie-George, Daron Wilkins, Andres Sousa Poza, Mustafa Canan, Samuel Kovacic, Jiang Li

Engineering Management & Systems Engineering Faculty Publications

Generative adversarial networks (GANs) have become very popular in recent years. GANs have proved to be successful in different computer vision tasks including image-translation, image super-resolution etc. In this paper, we have used GAN models for ship deck segmentation. We have used 2D scanned raster images of ship decks provided by US Navy Military Sealift Command (MSC) to extract necessary information including ship walls, objects etc. Our segmentation results will be helpful to get vector and 3D image of a ship that can be later used for maintenance of the ship. We applied the trained models to engineering documents provided …

Conceptual Development Of A Probabilistic Graphical Framework For Assessing Port Resilience, Katherine Smith, Rafael Diaz, Yuzhong Shen, Francesco Longo

VMASC Publications

Technological advances such as cyber physical systems and autonomous vehicles combined with increased disruptions including the Covid-19 pandemic and coastal natural disasters have heightened the importance of port risk analysis methodologies and frameworks that can accurately quantify and optimize resilience. This work presents the conceptual development of a novel combination of analysis methodologies linking a probabilistic graphic approach on a network of risk events with a functional dependency approach on a system network. Key advantages of these two methodologies are the ability to model and learn causal interactions rather than simply correlations and a high level of computational efficiency. This …

Enhancing Emulsion Liquid Membrane System (Elm) Stability And Performance For The Extraction Of Phenol From Wastewater Using Various Nanoparticles, Faris H. Al-Ani, Qusay F. Alsalhy, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Emulation liquid membrane (ELM) technology has recently garnered attention as an efficient alternative for separating pollutants, but it faces the problem of instability during the application, as well as emulsion breaking. With this in mind MgO, Al₂O₃, and three magnetic Fe₂O₃ nanoparticles (of different sizes) were utilized to fabricate a new Pickering ELM system (PELM). The extraction efficiency of phenol from aqueous solution by PELM was studied with different NPs types and with different phenol concentrations (1,000; 500; 100; and 50 ppm). It was found that the type of NPs and concentration of …