Engineering Commons^™

Checkerbot, Sean P. Whitty

Electrical Engineering

This product is able to play a game of checkers against the customer at three different preset difficulties. It can process the board on its turn, and displays its next turn to its opponent by updating the board state via the LEDs. It consists of a laptop screen display, and a computer chip with the programmed ability to process the checkers board and decide its next move. It provides the customer with an opponent that can be modified in difficulty so it can provide however much of a challenge as the customer desires, as well as allowing for a 2 …

Relating The Dongre Workability Test To Cold In-Place Recycled Asphalt Pavements, Gus Williams

Civil Engineering Undergraduate Honors Theses

The Dongre Workability Test (DWT) is a test for determining an asphalt pavement’s relative workability from the stress-strain curve of a sample. While the DWT has seen favorable results with warm mix and hot mix asphalt, Casillas and Braham (2020) attempted to apply this test to cold in-place recycled (CIR) asphalt pavements with limited results. This paper looked at the process of reexamining the DWT method to more favorable results with CIR samples. Phase 1 consisted of defining ten possible metrics from the stress-strain curve and applying them to samples with three different curing conditions. From these preliminary results, the …

Charged Particle Environment Testing Of A Deep Space Radiation Shield With Associated Fabrication And Calibration Of Pulsed Power Systems, Mark Bedford Moffett

Theses and Dissertations

Space radiation is one of the primary dangers faced outside of the protective magnetosphere of Earth. Despite the persistent radiation threat to self-contained human habitation and the risk of increased exposure during long-duration missions, reliable long-term radiation protection is not well-developed. Active shielding is an avenue of preventative radiation protection that could be deployed to protect astronauts and biological life from the effects of radiation. This dissertation explores the design scalability of an active magnetic shield for protecting against isotropic radiation in deep space. Each shield is composed of two concentric, elliptical layers of circular conducting coils, each arranged like …

A Comparative Study On The Application Of Intelligent Algorithms As The Solution Of Inverse Heat Conduction Problems, Dominic Allard

Theses and Dissertations

A critical component necessary for the safety and survival of space vehicles are the thermal protection systems (TPS). Especially when subject to atmospheric re-entry, the heating loads subject to the space vehicle requires the implementation of extensive protection. The TPS commonly used currently are passive ablative materials which burn away under extreme heat flux. Due to the nature of the material and the incident heat flux, it is not feasible to attain accurate, real-time measurements for the boundary conditions with sensors placed on the surface of the space vehicle. The ability to do such would allow opportunities to implement active …

Exploration Of Simplified Vehicle Operations For Electric Vertical Takeoff And Landing Through A Garmin Autopilot On A Piper Warrior, William Stefan Dietrich

Theses and Dissertations

Urban Air Mobility is an emerging concept that would allow urban transportation of both people and cargo through the air in large metropolitan cities. Because of new propulsion methods like distributed electrical propulsion, the Urban Air Mobility is concentrating on Electric Vertical Takeoff and Landing aircraft to implement its concept. Controlling and maneuvering these aircraft are very different than piloting traditional general aviation even through Electric Vertical Take and Landing aircraft aim to be in the same size category. Because of the more complex controls needed for Electric Takeoff and Landing aircraft, Simplified Vehicle Operation schemes are being developed in …

Characterization Of Coupling Between Inertial Particles And Turbulent Wakes From Porous Disk Generators, Kristin N. Travis, Sarah E. Smith, Laure Vignal, Henda Djeridi, Mickael Bourgoin, Raul Bayoan Cal, Martin Obligado

Mechanical and Materials Engineering Faculty Publications and Presentations

This study presents the findings of a wind tunnel experiment investigating the behaviour of micrometric inertial particles with Stokes numbers around unity in the turbulent wake of a stationary porous disk. Various concentrations Φv ∈ ([6 − 19] × 10−6) of poly-disperse water droplets (average diameter 40–50μm) are compared with sub-inertial tracer particles. Hot-wire anemometry, phase Doppler interferometry and particle image velocimetry were implemented in the near- and far-wake regions to study the complex dynamics of such particles. Quadrant analysis is used to explore the shear effects of the particle wake interaction. Turbulence statistics and particle size distributions reveal distinct …

Application Of Ensemble Methods For Solving Offshore Wind Farm Layout Optimization Problems, Puyi Yang

Theses and Dissertations

Wind energy is considered as one of the most promising renewable energy sources. The intent of this dissertation is to assess the application of ensemble methods on offshore wind farm layout optimization. In this regard, four research questions are considered and addressed accordingly each of which are discussed in detail in a separate chapter (chapter 2 to 5). The first research question is focused on choosing appropriate analytical wake model to be used for the wind farm layout optimization (WFLO) problems in this dissertation. The WFLO problem is a complex and non-convex optimization problem. The accuracy of analytical wake models …

The Ejection Of Large Non-Oscillating Droplets From A Hydrophobic Wedge In Microgravity, Logan Torres, Mark M. Weislogel

Mechanical and Materials Engineering Faculty Publications and Presentations

When confined within containers or conduits, drops and bubbles migrate to regions of minimum energy by the combined effects of surface tension, surface wetting, system geometry, and initial conditions. Such capillary phenomena are exploited for passive phase separation operations in micro-fluidic devices on earth and macro-fluidic devices aboard spacecraft. Our study focuses on the migration and ejection of large inertial-capillary drops confined between tilted planar hydrophobic substrates (a.k.a., wedges). In our experiments, the brief nearly weightless environment of a 2.1 s drop tower allows for the study of such capillary dominated behavior for up to 10 mL water drops with …

Using The Inelastic Background In Hard X-Ray Photoelectron Spectroscopy For A Depth-Resolved Analysis Of The Cds / Cu(In,Ga)Se < Inf > 2 < / Inf > Interface, Dirk Hauschild, Ralph Steininger, Dimitrios Hariskos, Wolfram Witte, Sven Tougaard, Clemens Heske, Lothar Weinhardt

Chemistry and Biochemistry Faculty Research

The inelastic background of hard x-ray photoelectron spectroscopy data is analyzed to paint a depth-resolved picture of the CdS/Cu(In,Ga)Se2 (CdS/CIGSe) layer structure. The CdS/CIGSe interface is the central component in next-generation chalcopyrite thin-film photovoltaic devices. By analyzing both, the (unscattered) core-level peaks and the inelastic background, and by varying the excitation photon energy from 2.1 up to 14 keV, we can derive photoemission information over a broad range of electron kinetic energies and, hence, sampling depths. With this complementary information, the CdS film thickness of a CdS/CIGSe interface can be accurately determined as a function of the CdS deposition time. …

A Comparison Of Multiple Machine Learning Algorithms To Predict Whole-Body Vibration Exposure Of Dumper Operators In Iron Ore Mines In India, Rahul Upadhyay, Amrites Senapati, Ashis Bhattacherjee, Aditya Kumar Patra, Snehamoy Chatterjee

Michigan Tech Publications, Part 1

Background: This study deals with some factors that influence the exposure of whole-body vibration (WBV) of dumper operators in surface mines. The study also highlights the approach to improve the multivariate linear analysis outcomes when collinearity exists between certain factor pairs.

Material and Methods: A total number of 130 vibration readings was taken from two adjacent surface iron ore mines. The frequency-weighted RMS acceleration was used for the WBV exposure assessment of the dumper operators. The factors considered in this study are age, weight, seat backrest height, awkward posture, the machine age, load tonnage, dumper speed and haul …

Supporting Psychosocial Interactions In Electronics 1 During Online Learning Using Multisim, Romano Q. Neyra, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

There has been a body of research that shows the benefits of engaging the students in the learning process. This has been even more important now that there are not yet face-to-face meetings in engineer schools and students are confined in their virtual classrooms. Research show benefits of student engagement include increased attention and focus, motivation to utilize higher-level critical thinking skills, and promotion of learning experience. One of the means by which students are engaged in Electronics 1 Classes is through the use of Multisim Software. A student survey was done to randomly select students in Electronics 1 to …

W22 Landing Gear And Door Uplocks Final Design Review (Fdr), Jason Szeto, Garrett Donovan, Christopher Edward, Kevin Lee

Mechanical Engineering

This Final Design Review report outlines the senior project sponsored by General Atomics Aeronautical Systems, Inc., to design an unmanned aerial vehicle landing gear uplock and door locks. The main goal of the project is to create a proof-of-concept uplock that does not operate on hydraulic power, has minimal moving parts, and can support the weight, vertical acceleration and aerodynamic loads on the landing gear or doors. The document covers the background research, design specifications, design selection process, justifications, manufacturing, and verification of the functional prototype.

Compact In-Rack Dielectric Immersion Cooling System, Salvador Landeros Jr, Joshua M. Hannaman, Marshall D. Reid

Mechanical Engineering

The Compact Dielectric Cooling team consisting of Josh Hannaman, Marshall Reid, and Salvador Landeros worked with Aria Technologies to create a thermal management system for data centers that can easily implement liquid cooling into current infrastructure for high density computing servers. The project was to design, build, and test a compact immersion cooling system for a senior project at California Polytechnic State University – San Luis Obispo. Immersion cooling is a liquid-cooling process that involves the immersion of electrical IT equipment and the removal of heat from the hot IT components using dielectric liquid. The goal was to build a …

Optimized Tip Cooling Using Am Process, Alberto H. Gamez, Lourdes Sarmiento Martinez, Andrew Van Bogelen

Mechanical Engineering

This Final Design Review (FDR) reports on the senior design project undertaken by our team of mechanical engineering seniors at California Polytechnic State University, San Luis Obispo. This project seeks to use the additive manufacturing process to improve the existing design of a Taurus 60 gas turbine injector tip. The current injector tip is owned by Solar Turbines, a designer and manufacturer of gas turbines for electric generation, propulsion, as well as natural resource transportation. The challenge at hand is to design a new injector tip that will be reliable for at least 60,000 hours and provide ease of replacement, …

Mug For Veterans With Tremors, Eliot Daniel Briefer, Nicholas Michael Greco, Lucas Paul Martos-Repath, Tiernan Lif Kehoe

Mechanical Engineering

This Final Design Review Report outlines the senior design project completed by a team of mechanical engineering students attending California Polytechnic State University, San Luis Obispo for the McGuire Veterans Affairs Medical Center in Richmond, VA. The scope of the project was to design, build, and test a device for veterans with tremors that would allow them to enjoy their favorite drinks comfortably and easily, without worrying about spills. The final product must be lightweight, aesthetic, capable of handling various tremor types, and can be operated in multiple planes to allow the veterans full control over the device. This document …

Machine Learning Application For Mission Data Reprogramming, Paolo A. Bingham

Theses and Dissertations

Before entering a conflict or theater, USAF aircraft require updated mission data software reprogramming. Mission data controls all electronic warfare (EW) operations of the aircraft. EW operations include identifying and jamming radar operated systems, whether they are friendly or hostile. The process of reprogramming software is continuous and routinely updated for every EW system annually. On specific circumstances, the process can be expedited to months, but this puts a strain on the development team and shifts all attention to one specific mission data file. Unfortunately, a growing number of requests to upgrade mission data to a higher priority state, has …

Assessment Of Visual Field Performance Asymmetries While Utilizing Aircraft Attitude Symbology, George A. Reis

Theses and Dissertations

Two experiments were conducted to examine visual performance asymmetries when perceiving complex, meaningful visual stimuli, such as the Arc Segment Attitude Reference (ASAR). The ASAR symbology represents an aircraft’s attitude. Experiment 1 examined participants’ performance while recalling and reporting various attitudes of ASAR symbology and a Gabor patch, which were briefly presented in the peripheral visual field. Performance was assessed for coordinate and categorical judgments at various display locations. The results were consistent with the horizontal-vertical anisotropy literature, which implies that performance would be better for stimuli placed on the horizontal meridian as compared to stimuli placed on the vertical …

Creep Behavior And Deformation Mechanisms Of Spark Plasma Sintered Oxide Ceramics For Aerospace Systems At 1300˚C - 1400˚C, David D. Swanson

Theses and Dissertations

The mechanical behavior of YAG and LuAG was investigated at elevated temperatures. The specific materials investigated in this work include high-purity, polycrystalline YAG, high-purity, polycrystalline LuAG, and two doped variants of YAG: 2at% Yb-doped, polycrystalline YAG and 2at% Er-doped, polycrystalline YAG. Several billets of each material were prepared and processed by means of spark plasma sintering (SPS). Many different sintering parameters were utilized in order to obtain materials with various physical properties and to identify the effects of sintering parameters on the average grain size of the resulting materials. The compressive creep behavior of these materials was investigated at 1300°C …

Space Domain Awareness Assessment Of Cislunar Periodic Orbits For Lagrange Point Surveillance, Adam P. Wilmer

Theses and Dissertations

Cislunar periodic orbits provide an elegant means to fill the observational capability gaps which are present in ground-based and/or near-Earth spaced-base sensors. This research involves theoretical analysis on the effectiveness of cislunar periodic orbits for Space Domain Awareness (SDA) mission architectures. Specifically, cislunar periodic orbits are analyzed, both individually and in constellations with one another, for their effectiveness at monitoring target satellites in Lyapunov and halo orbits about the Earth - Moon L1 and L2 Lagrange points. All orbits are created and modeled in the Circular Restricted Three-Body Problem (CR3BP), then subject to perturbations in both the Elliptical Restricted Three-Body …

Design, Development, And Testing Of Embedded Computing On Afit's Control & Autonomy Space Proximity Robot (Caspr), Collin A. Gwaltney

Theses and Dissertations

This thesis reviews RPO algorithm testbeds and discusses the development of the Control and Autonomy Space proximity Robot (CASpR) kinematic testbed housed at the Air Force Institute of Technology (AFIT). CASpR operates on a rail system to propagate the trajectories of two satellites using the Hill-Clohessy-Wiltshire (HCW) Equations of Motion (EOMs). In this study, the implementation of a Jetson TX2i as an onboard flight computer is discussed and accomplished. Each hardware component used in the process of adding embedded computing as well as the software and paths of communication are all discussed in detail. Tests are conducted to assess the …

Design And Performance Characterization Of A Water Propellant Resistojet Thruster, Sean M. Weathersby

Theses and Dissertations

Secondary payloads, such as CubeSats, are being increasingly used by the US Department of Defense in the role of defense capability enhancement, and these increasingly complex defense missions can require extended lifespans that result in the need for a thruster. While many thruster options exist, characteristics such as propellant toxicity, complexity, and low performance limit many viable solutions. However, a potential answer that satisfies these thruster limitations is found in electrothermals, specifically the resistojet. The research presented here represents the first attempt to construct a 1U water-propellant resistojet thruster design and establish an initial characterization through evaluation of various performance …

Injection Studies On A Small-Scale Rotating Detonation Engine With Improved Flow Control, Jonathan J. Wyatt

Theses and Dissertations

The Rotating Detonation Engine (RDE) has gained increasing attention in recent years for its potential advantages over typical deflagration combustion. A Micro-RDE design with an outer diameter of 28mm operating on Nitrous Oxide and Ethylene was recently developed, which stretched the limits of small-scale detonation engines. The testing on this rig has shown a stable one wave mode detonation with frequencies reaching 16.8 kHz. Key parameters that influence the detonation wave mode are cell size, fill height, and wave speed, which are heavily influence d by injection schemes. Previous testing utilized a partially premixed jets in crossflow (JIC) injection scheme, …

The Application Of Deep Learning Algorithms To Pediatric Vascular Anomalies Using A Limited Dataset, Briana I. Robertson

Honors Capstones

No abstract provided.

Growth Of Pseudomorphic Gesn At Low Pressure With Sn Composition Of 16.7%, Joshua Grant, Grey Abernathy, Oluwatobi Olorunsola, Solomon Opeyemi Ojo, Sylvester Amoah, Emmanuel Wangila, Samir K. Saha, Abbas Sabbar, Wei Du, Murtadha Alher, Bao-Hua Li, Shui-Qing Yu

Physics Faculty Publications and Presentations

Group-IV alloy GeSn holds great promise for the high-performance optoelectronic devices that can be monolithically integrated on Si for near- and mid-infrared applications. Growth of GeSn using chemical vapor deposition technique with various Sn and Ge precursors has been investigated worldwide. To achieve relatively high Sn incorporation, the use of higher pressure and/or higher order Ge hydrides precursors were reported. In this work, we successfully demonstrated the growth of high-quality GeSn with Sn composition of 16.7% at low pressure of 12 Torr. The alloy was grown using the commercially available GeH₄ and SnCl₄ precursors via a chemical vapor …

Seismic Performance Assessment Of Building Contents: Monetary Losses And Injuries, Sereen Majdalaweyh

All Dissertations

Building contents include all the components that are not attached to the building which the owners place after the construction phase, such as furniture, electrical equipment, glassware, and other personal items. Loss and damage assessment of building contents proved to be challenging in performance-based earthquake engineering frameworks because of the data sparsity. Damages to building contents during an earthquake not only cause monetary losses; tumbling and over-toppling of heavy building contents could result in injuries and even deaths of occupants. While major advancements have been made in performance-based earthquake engineering; however, the focus is mainly on damages and collapse risk …

Mechanical Interfacial Locking And Multiscale Modeling Of Reinforced Thermoplastic Composites For Structural Applications, Anmol Kothari

All Dissertations

The ever-growing pressure of reducing the adverse impact of transportation systems on environment has pushed industries towards fuel-efficient and sustainable solutions. While several approaches have been used to improve fuel efficiency, the light-weighting of structural components has proven broadly effective. In this regard, reinforced thermoplastic composites (RTPC), owing to their high recyclability, higher impact strength and fast cycle times, have become competitive candidates at an industrial scale. However, to implement RTPC toward large scale structural applications several challenges pertaining to material design and manufacturing effects need to be addressed. To this end, a computational study is carried out to address …

Coupled Thermal Mechanical Analysis Methodology For Thermal Performance Evaluation And Failure Mode Identification Of Thermal Barrier Coatings For Heavy Duty Diesel Engines, Sean Moser

All Dissertations

Consumer demand and government regulation, as well as the Department of Energy’s SuperTruck program has motivated extraordinary effort to maximize the heavy-duty diesel engine’s thermal efficiency. Thermal barrier coatings (TBCs) provide an avenue for increasing the thermal efficiency of the mixing controlled combustion (MCC) process through the reduction of heat transfer losses. The myriad of previous studies presents conflicting conclusions, both in the merit of TBCs for cycle improvement, and also for coating durability and potential adverse effects from coating failure. While the most recent studies with thin thermal barrier coatings (~100-250 µm) have shown a majority of positive cycle …

Influencing The Inflammatory Response Through Multi-Scale Geometry, Antibiotic Release, And Fluid Management In A Textile-Based Biomaterial Wound Dressing, Elizabeth Gianino

All Dissertations

The total population of diagnosed and undiagnosed diabetes mellitus in the United states is expected to rise by 54% between the years of 2015 and 2030 contributing to $200 billion in health care expense. The exponential rise in common diabetic wounds, such as diabetic foot ulcers, puts a large population at risk for complications such as infection, amputation, and even death. Peripheral neuropathy leading to late diagnoses, patient non-compliance, and lack of holistic treatment options all contribute to complications with the incidence of new ulcer formation after treatment reaching 50%. This work explores the design, development, and in vitro evaluation …

Investigation And Characterization Of New Optically Stimulated Luminescence (Osl) Dosimetric Materials, Linyu Pan

All Dissertations

Optically stimulated luminescence (OSL) dosimeters have attracted increasing attention due to advantages over TL dosimeters, including no thermal quenching and higher sensitivity. Nevertheless, currently, there are only two commercially available OSL dosimeters, BeO and Al₂O₃:C. An OSL dosimeter requires low effective atomic number (Z_eff < 16), at least one type of recombination center and one type of trap, and UV~blue emission. In this dissertation, motivated by the search of new OSL dosimetric materials, a systematic investigation of alumina (Z_eff = 11.3) and magnesium aluminate spinel (Z_eff = 11.2) based materials was performed in terms of the engineering of the recombination centers and electronic traps. Microstructural characterization was executed by means of X-ray diffraction (XRD) and Raman spectroscopy. Luminescence was characterized under X-ray excitation (radioluminescence; RL) at ambient and …

Towards Understanding Protein Immobilization Rules Through Site-Specific Covalent Immobilization Of T4 Lysozyme, Maxwell Hilbert

All Dissertations

Soluble enzymes have the unique ability to assist the conversion of complex substrates in fewer steps compared to conventional chemical synthesis; however, when immobilized to a surface, the insoluble enzyme's activity and stability can suffer in its new environment. To improve upon future immobilized enzyme efficacy, a fundamental understanding of the interactions across the enzyme, linker, and surface during covalent, site-specific immobilization that can be detrimental to its activity is required. More specifically, using a well-characterized and model enzyme, T4 lysozyme (T4L), 28 different cysteine attachment points' effects on site-specifically immobilized activity are examined. Different combinations of heterobifunctional amine-to-sulfhydryl crosslinkers …