Engineering Commons^™

On Compressional Wave Attenuation In Muddy Marine Sediments, Charles W. Holland, Stan E. Dosso

Electrical and Computer Engineering Faculty Publications and Presentations

A method for measuring in situ compressional wave attenuation exploiting the spectral decay of reflection coefficient Bragg resonances is applied to fine-grained sediments in the New England Mud Patch. Measurements of layer-averaged attenuation in a 10.3 m mud layer yield 0.04 {0.03, 0.055} dB/m/kHz (braces indicate outer bounds); the attenuation is twice as large at a site with 3.2 m mud thickness. It is shown that both results are heavily influenced by a ∼1 m sand-mud transition interval created by geological and biological processes that mix sand (at the base of the mud) into the mud. Informed by the observations, …

Machine Learning Representations For Optimization Of Process Systems, Logan Watts

Chemical Engineering Undergraduate Honors Theses

The optimal operation of chemical processes provides the foundation for optimization problems to determine the most effective way to operate or design a given process. Chemical processes can be represented as nonlinear systems of equations with decision variables, resulting in a problem that can be solved through nonlinear solvers. The downfalls of nonlinear solvers create the need for improved methods of finding globally optimal solutions to the design or operation of a chemical process. The project will seek to evaluate the use of artificial neural networks to approximate nonlinear systems of equations for the purpose of optimizing chemical processes. The …

Peptoid-Functionalized Gold Nanoparticles For Zika Virus Envelope Protein Detection, Meagan Olsen

Chemical Engineering Undergraduate Honors Theses

Detection and identification of viral pathogens is essential in providing effective and rapid medical treatment. Well-established detection methods can be expensive, slow, and sometimes unable to provide the needed sensitivity and specificity. The Zika virus is one clinically relevant pathogen that cannot be easily identified due to cross-reactivity with other viruses from the same family. Electrochemical sensors enhanced with peptoid-functionalized gold nanoparticles (AuNPs) are an alternative to traditional techniques that offers rapid, accurate, label-free pathogen detection for point-of-care diagnostics. To this end, a peptoid capable of binding to the Zika virus envelope protein was developed and its binding affinity for …

Promotion Of Human Schwann Cell Proliferation Using Heparin/Collagen Coated Nerve Conduits, John Magness

Chemical Engineering Undergraduate Honors Theses

Often in the aftermath of an injury or surgery, the sense of touch and muscle control is lost in the affected area as nerves are damaged or severed and fail to grow back completely. The regeneration of the nerve cells can be promoted by treating the nerves with nerve conduits. Nerve conduits are hollow cylinders of bio-compatible materials that can be surgically implanted to the disconnected nerve to promote and direct the growth of nerves. The objectives of this research are to investigate the ability of nerve conduits treated with layer-by-layer coatings to promote the growth of Schwann cells, to …

Development Of An Integrated Salt Cartridge-Reverse Electrodialysis (Red) Device To Increase Electrolyte Concentrations Of Human Blood Flow To Power Biomedical Devices, Caroline Campbell

Chemical Engineering Undergraduate Honors Theses

Emerging technologies in nanotechnology and biomedical sciences have led to an increase in biomedical implantable devices including cardiac pacemakers, artificial organs, drug pumps, and sensors. These devices require continuous stable and reliable power to operate, which creates the demand for the need to find a safe, reliable, and stable power source. A promising avenue for a power source for these devices is a miniaturized reverse electrodialysis (RED) biopower cell design that utilizes the salinity differences between bloodstreams that flow inside the human body. Initial results of the RED system demonstrate that higher gradient salinity differences between streams lead to a …

Garver Industrial Design Project: Designing A Full-Scale Reverse Osmosis Water Treatment Facility For The City Of Lawton, Oklahoma, Kayliana Warden, Marlando Collins, Sandrina Depaz, Reid Eakin, Reed Leasure, Vera Rodriguez

Chemical Engineering Undergraduate Honors Theses

A groundwater treatment facility was designed for Lawton, Oklahoma to address potential water scarcity due to drought conditions in southwest Oklahoma. The facility will produce five million gallons per day (MGD) of treated water. The plant will have the capacity of treating 4,085 gallons per minute of influent water at an 86% recovery. The water to be treated will come from the Arbuckle-Timbered Hills Aquifer. Studies have been conducted around the aquifer to identify the best well site locations.

A centralized treatment facility using reverse osmosis filtration as the main treatment technology has been designed. To prevent reverse osmosis membrane …

Apiary Wagon Frame, Katelyn Franklin, Ryoma Thomas

Honors Theses

The objective of this thesis to demonstrate how our senior capstone project team took a product from a concept to a mass production manufacturing operation, using the knowledge and experience gained through our four years in the Haley Barbour Center for Manufacturing Excellence (CME). Our product, the Apiary Wagon Frame, is an opportunity to reduce the barrier to entry into the hobbyist beekeeping community. In the design process for the Apiary Wagon Frame, we tested several prototypes and different fabrication methods, ending with a product capable of holding twenty hive frames. After building our final prototype, the group created a …

Analyzing The Effects Of E-Hook Peptides On Kinesin-1, Ashton Ward Murrah, Baylee Hope Howard

Honors Theses

Cancer is the second leading cause of death in the United States. Cancerous growth is a result of oncogenes, or mutated genes that increase the rate of cell division in an uncontrolled manner. Cell division, which consists of mitosis and cytokinesis phases, is dependent upon the active movement of kinesin motor proteins along microtubules to rearrange the cytoskeleton for equitable distribution of genetic material to daughter cells. As kinesins are vital to this process, if we could prevent kinesin from binding to the microtubules, cell division would cease.

The goal of this study is to develop a method to prevent …

Introduction Of New Value Stream Through Vermicomposting Process, James Spalding, Joseph Harris

Honors Theses

The purpose of our project is to analyze whether a waste byproduct can be monetized into a viable profit stream for Wonderbird Spirits. Spent grain, a waste byproduct created by the distillation process, is currently the company’s biggest source of material waste. The CME project team designed and built a trommel to aid liquid-solid separation of the spent grain so that the solid portion can be repurposed as feedstock for a vermicomposting setup. We also suggest vermicomposting setup for the distillery based on the needs and capabilities of Wonderbird Spirits. We present financial analyses detailing the cost of creating the …

An Investigation Into Cognitive Radio System Performance, Courtney Hardy, Lucas F. Feather, William S. Guy

Honors Theses

The objective of this thesis is to explore cognitive radio performance through an in-depth literature review and an implementation of a software-defined radio prototyping system. Specifically, this thesis investigates the spectrum-sensing aspect of cognitive radio by comparing two spectrum-sensing methods. It was found in the literature review that a system utilizing matched filter detection would provide higher probability of detection in low signal-to-noise ratio environments when compared to a system utilizing energy detection. These spectrum sensing methods were thus implemented and compared in the cognitive radio systems presented in this thesis. Additionally, experiments were conducted to determine the most efficient …

Creation Of A Wooden Model Toy Car As A Learning Module For Students Enrolled In Manufacturing 152, Patrick Brown

Honors Theses

This project involved the design and manufacture of a children’s wooden model toy car constructed on the CME factory floor. Apart from building a children’s toy, the purpose of this project was to introduce younger CME students to a high-quality product made efficiently in regards to manufacture time and total cost. The design for the car required the inclusion of principles from different manufacturing philosophies taught in the CME such as LEAN Manufacturing, which works to eliminate waste from a process, and Design for Manufacture and Assembly, which seeks to reduce cost and cycle time for a product. Through the …

Molecular Mechanisms Of Oxidative Stress On Molecular Motors, Addison Caspari-Linhardt

Honors Theses

Astronauts encounter many forms of ionizing radiation during space travel. Ionizing radiation has been seen to cause cancer, cataracts, radiation sickness, tissue damage, hereditary effects, and damage to the central nervous system. Ionizing radiation can damage DNA molecules through oxidation, as well as other vital proteins like molecular motors. Kinesin-1 is a molecular motor protein that essential to intracellular transport. Microtubules serve as the “roadway” for kinesin transport, where kinesin converts chemical energy from ATP hydrolysis into mechanochemical “steps” to move along the microtubules. Optical trapping has been used in previous research to measure single kinesin motor properties. We have …

Additive Manufacturing And Mechanical Properties Of The Dense And Crack Free Zr-Modified Aluminum Alloy 6061 Fabricated By The Laser-Powder Bed Fusion, Abhishek Mehta, Le Zhou, Thinh Huynh, Sharon Park, Holden Hyer, Shutao Song, Yunali Bai, D. Devin Imholte, Nicolas E. Woolstenhulme, Daniel M. Wachs, Yongho Sohn

Mechanical Engineering Faculty Research and Publications

For additive manufacturing such as laser powder bed fusion (LPBF), commercial aluminum alloy (AA) 6061 is typically considered unsuitable due to formation of solidification cracking and/or excessive porosity. In this study, to improve buildability/printability of AA6061, 1 wt% of Zr was alloyed to produce Zr-modified AA6061 by LPBF. Powders of unmodified and Zr-modified AA6061 were produced by gas atomization, and utilized as a feed-stock for the LPBF to fabricate specimens for microstructural examination and mechanical testing. The as-built unmodified AA6061 exhibited poor printability due to formation of cracks and porosity in the microstructure regardless of LPBF parameters. However, the Zr-modified …

High Strength We43 Microlattice Structures Additively Manufactured By Laser Powder Bed Fusion, Holden Hyer, Le Zhou, Qingyang Liu, Dazhong Wu, Shutao Song, Yuanli Bai, Brandon Mcwilliams, Kyu Cho, Yongho Sohn

Mechanical Engineering Faculty Research and Publications

WE43 is a high strength, high creep resistant Mg-alloy containing Y, Nd, and Zr, and has potential for many lightweight structural applications in the automotive, aerospace, and biomedical industries. Additive manufacturing technology such as laser powder bed fusion (LPBF) brings an opportunity to produce complex geometries such as lattice structures. In this study, fabrication, compressive behavior, and fracture modes of 24 different microlattice structures were investigated by varying unit cell type, strut diameter, and number of unit cells. These complex lattice structures were produced by LPBF using the parameter set: laser power = 200 W, scan speed = 1100 mm/sec, …

A New Configuration Of Paralleled Modular Anpc Multilevel Converter Controlled By An Improved Modulation Method For 1 Mhz, 1 Mw Ev Charger, Mostafa Abarzadeh, Waqar A. Khan, Nathan Weise, Kamal Al-Haddad, Ayman M. El-Refaie

Electrical and Computer Engineering Faculty Research and Publications

In this article, a new configuration of the modular multilevel converter (MLC) based on the parallel connection of three-level active-neutral-point-clamped (3L-ANPC) cells as well as its improved modulation method is proposed for 1 MHz, 1 MW electric vehicle (EV) megacharger. In the proposed paralleled modular ANPC-MLC, only six high-frequency silicon carbide (SiC) power switches operating at 333 kHz are required to generate 1 MHz switching frequency spectrum. Moreover, the operating voltage of all power devices is halved, the magnitude of the first switching frequency harmonic cluster is decreased by the factor of five, and the load current is equally distributed …

Reliability And Performance Improvement Of Puc Converter Using A New Single-Carrier Sensor-Less Pwm Method With Pseudo Reference Functions, Mostafa Abarzadeh, Saeed Peyghami, Kamal Al-Haddad, Nathan Weise, Liuchen Chang, Frede Blaabjerg

Electrical and Computer Engineering Faculty Research and Publications

A new single-carrier sensor-less pulsewidth modulation (PWM) method using suggested pseudo reference functions is proposed for packed U-cell (PUC) converter to improve performance and reliability of the PUC converter. It is composed of one PWM carrier signal and two suggested pseudo reference functions. By employing the proposed modulation method, the PUC dc capacitor voltage ripple is substantially decreased, and faster sensor-less capacitor voltage balancing is obtained. Moreover, the power losses are evenly distributed among all power switches. Consequently, notable reduction of the PUC dc capacitor voltage ripple and even distribution of the power loss among switches enhance the PUC converter's …

Neural Network For Monitoring Infant Feeding Process In The Smartbottle Device, Jiajun Guan

Master's Theses

To research the relationship between Childhood obesity and infant feeding patterns, the Electrical Engineering Department at California Polytechnic State University has designed a SmartBottle device attaching to the bottom of a baby bottle to monitor the infant feeding process. This project mainly focuses on the software and firmware design, as well as the neural network design of the SmartBottle device. The SmartBottle device is designed to identify infant feeding activities and to record related data for overweight and obesity research on children. This device includes a 6-dimensional inertial sensor that contains a 3-axis digital accelerometer and a 3-axis digital gyroscope. …

Photothermal Response Induced By Nanocage-Coated Artificial Extracellular Matrix Promotes Neural Stem Cell Differentiation, Seunghyun Jung, Nathaniel Harris, Isabelle I. Niyonshuti, Samir V. Jenkins, Abdallah M. Hayar, Fumiya Watanabe, Azemat Jamshidi-Parsian, Jingyi Chen, Michael J. Borrelli, Robert J. Griffin

Mechanical Engineering Faculty Publications and Presentations

Strategies to increase the proportion of neural stem cells that differentiate into neurons are vital for therapy of neurodegenerative disorders. In vitro, the extracellular matrix composition and topography have been found to be important factors in stem cell differentiation. We have developed a novel artificial extracellular matrix (aECM) formed by attaching gold nanocages (AuNCs) to glass coverslips. After culturing rat neural stem cells (rNSCs) on these gold nanocage-coated surfaces (AuNC-aECMs), we observed that 44.6% of rNSCs differentiated into neurons compared to only 27.9% for cells grown on laminin-coated glass coverslips. We applied laser irradiation to the AuNC-aECMs to introduce precise …

Supporting Transportation System Management And Operations Using Internet Of Things Technology, Hong Yang, Yuzhong Shen, Mecit Cetin, Zhenyu Wang

Computational Modeling & Simulation Engineering Faculty Publications

Low power wide-area network (LPWAN) technology aims to provide long range and low power wireless communication. It can serve as an alternative technology for data transmissions in many application scenarios (e.g., parking monitoring and remote flood sensing). In order to explore its feasibility in transportation systems, this project conducted a review of relevant literature to understand the current status of LPWAN applications. An online survey that targeted professionals concerned with transportation was also developed to elicit input about their experiences in using LPWAN technology for their projects. The literature review and survey results showed that LPWAN’s application in the U.S. …

Electroactive Polymeric Composites To Mimic The Electromechanical Properties Of Myocardium In Cardiac Tissue Repair, Kaylee Meyers, Bruce Lee, Rupak Rajachar

Michigan Tech Publications, Part 1

Due to the limited regenerative capabilities of cardiomyocytes, incidents of myocardial infarction can cause permanent damage to native myocardium through the formation of acellular, non-conductive scar tissue during wound repair. The generation of scar tissue in the myocardium compromises the biomechanical and electrical properties of the heart which can lead to further cardiac problems including heart failure. Currently, patients suffering from cardiac failure due to scarring undergo transplantation but limited donor availability and complications (i.e., rejection or infectious pathogens) exclude many individuals from successful transplant. Polymeric tissue engineering scaffolds provide an alternative approach to restore normal myocardium structure and function …

Geometric Quality Assessment Of A Modular House Using Bim And Photogrammetric Point Clouds, Preetam Kapsikar

UNLV Theses, Dissertations, Professional Papers, and Capstones

As-built documentation of modular structures is an important set of records for a project, that consist of construction drawings and specifications, project design modifications, prefabrication, and component assembly. In particular, manual geometric quality assessments of a structure’s prefabricated components are generally fraught with errors, making it extremely difficult to compare the as-built construction with the specified drawings, which affects the project. Furthermore, if the prefabricated components are manufactured with errors, this can result in construction schedule delays and high additional costs due to rework. Several technologies, such as point cloud data generated using laser sensors and LiDAR, have been developed …

Investigation Of Bio-Inspired Pin Geometries For Heat Transfer Applications, Anish Prasad

Doctoral Dissertations and Master's Theses

Array of circular cylindrical pins or tubes are one of the most widely used type of convection cooling systems, profoundly used in the internal cooling of gas turbine blades. They promote heat transfer due to flow acceleration, secondary flows and wake shedding, at the expense of large pressure loss and unsteadiness in the flow. The need to reduce pressure loss and maintain the heat transfer rates are a much needed requirement for a variety of industries to improve the cooling efficiency. One such prominent line of research is conducted on optimizing the design of the circular cylindrical pins to increase …

Environmental Impacts Of Overdesign In Small Community Water Resource Recovery Facilities, Andrew Pham

Department of Environmental Engineering: Theses and Other Student Research

Although water resource recovery facilities (WRRFs) reduce environmental impacts related to water quality, their construction and operation result in negative environmental impacts in other categories. Past research into Nebraska WRRFs investigated variables determining energy intensity, opportunities and barriers for energy efficiency improvements, and environmental impacts of the construction and operation phase. This leads to the research question of what design practices can be considered to reduce the environmental impacts.

The Life Cycle Assessment (LCA) methodology was used to evaluate and compare the inventory and environmental impacts of nine small WRRFs, most of which are serving slow growing or declining populations. …

Development Of An Intraperitoneal Catheter Placement Device For Use On The Battlefield, Riley Reynolds

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The objective of this project was to simplify peritoneal cavity access so an Airforce field medic can safely infuse oxygen microbubbles (OMBs) into the intraperitoneal space for the emergency treatment of hypoxia due to lung damage. To solve this problem, we created an intraperitoneal catheter placement device for use on the battlefield. The three common methods and some of the most common devices for peritoneal cavity access were reviewed. Injury frequencies for each of the three methods were analyzed. The results showed that each of the access techniques gives a similar rate of iatrogenic injury.

The battlefield conditions where the …

Achieving Differential Privacy And Fairness In Machine Learning, Depeng Xu

Graduate Theses and Dissertations

Machine learning algorithms are used to make decisions in various applications, such as recruiting, lending and policing. These algorithms rely on large amounts of sensitive individual information to work properly. Hence, there are sociological concerns about machine learning algorithms on matters like privacy and fairness. Currently, many studies only focus on protecting individual privacy or ensuring fairness of algorithms separately without taking consideration of their connection. However, there are new challenges arising in privacy preserving and fairness-aware machine learning. On one hand, there is fairness within the private model, i.e., how to meet both privacy and fairness requirements simultaneously in …

Securing Fog Federation From Behavior Of Rogue Nodes, Mohammed Saleh H. Alshehri

Graduate Theses and Dissertations

As the technological revolution advanced information security evolved with an increased need for confidential data protection on the internet. Individuals and organizations typically prefer outsourcing their confidential data to the cloud for processing and storage. As promising as the cloud computing paradigm is, it creates challenges; everything from data security to time latency issues with data computation and delivery to end-users. In response to these challenges CISCO introduced the fog computing paradigm in 2012. The intent was to overcome issues such as time latency and communication overhead and to bring computing and storage resources close to the ground and the …

An 8-Bit Analog-To-Digital Converter For Battery Operated Wireless Sensor Nodes, Marvin Wayne Suggs Jr.

Graduate Theses and Dissertations

Wireless sensing networks (WSNs) collect analog information transduced into the form of a voltage or current. This data is typically converted into a digital representation of the value and transmitted wirelessly using various modulation techniques. As the available power and size is limited for wireless sensor nodes in many applications, a medium resolution Analog-to-Digital Converter (ADC) is proposed to convert a sensed voltage with moderate speeds to lower power consumption. Specifications also include a rail-to-rail input range and minimized errors associated with offset, gain, differential nonlinearity, and integral nonlinearity. To achieve these specifications, an 8-bit successive approximation register ADC is …

Fuzzyart: An R Package For Art-Based Clustering, Louis Steinmeister, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

Adaptive Resonance Theory (ART) was introduced by Steven Grossberg as a theory of human cognitive information processing (Grossberg 1976, 1980). Extending the capabilities of the ART 1 model, which can learn to categorize patterns in binary data, fuzzy ART as described in (Carpenter, Grossberg, and Rosen 1991) has become one of the most commenly used Adaptive Resonance Theory models (Brito da Silva, Elnabarawy, and Wunsch 2019). By incorporating fuzzy set theroy operators, fuzzy ART is capable of learning from binaray and bounded real valued data. Its advantage over other unsupervised learning algorithms lies in the flexibility of the learning rule. …

Evaluation Of Visible Diffuse Reflectance Spectroscopy In Liver Tissue: Validation Of Tissue Saturations Using Extracorporeal Circulation, Stylianos Voulgarelis, Faraneh Fathi, Astrid G. Stucke, Kevin D. Daley, Joohyun Kim, Michael W. Zimmerman, Johhny C. Hong, Nicholas Starkey, Kenneth P. Allen, Bing Yu

Biomedical Engineering Faculty Research and Publications

Significance: Real-time information about oxygen delivery to the hepatic graft is important to direct care and diagnose vascular compromise in the immediate post-transplant period.

Aim: The current study was designed to determine the utility of visible diffuse reflectance spectroscopy (vis-DRS) for measuring liver tissue saturation in vivo.

Approach: A custom-built vis-DRS probe was calibrated using phantoms with hemoglobin (Hb) and polystyrene microspheres. Ex vivo (extracorporeal circulation) and in vivo protocols were used in a swine model (n=15) with validation via blood gas analysis.

Results: In vivo absorption and scattering measured by vis-DRS with and without biliverdin …

Analysis Of Fluid Flow In Redox Flow Batteries, Erfan Asadipour

McKelvey School of Engineering Graduate Student Theses & Dissertations

Redox flow batteries (RFB) hold great potential for large-scale stationary energy storage. However, their low energy density compared to other energy storage systems must improve for feasibility. Electrolyte flow distribution affects current density distribution and providing a uniform current density distribution is one way to improve RFB performance. Additionally, reducing the power consumption of the electrolytes’ pump as a source of energy loss in RFB systems increases their efficiency. Investigating both subjects requires analysis of the fluid dynamics in RFB cells.

In this thesis, a novel, computationally cost-effective hydraulic-electrical analogous model (HEAM) was developed to study fluid dynamics by implementing …