Engineering Commons^™

Developing A Basic Formal Supply Chain Ontology To Improve Communication And Interoperability, David Morrow

Theses and Dissertations

Information is crucial to supply chain performance because it is used to make decisions and trigger actions. Organizations across world-class supply chains increasingly use information technology to analyze and process supply chain data. However, supply chain management lacks a common language, making information exchange difficult. An ontology can provide a standardized framework that organizes a given knowledge domain. This research proposes a common language for developing a supply chain ontology that can be built into a basic formal ontology understood by both humans and computers. According to current research, an established and widely used supply chain framework is a good …

Autonomous Mission Planning For Spacecraft Rendezvous And Proximity Operations, Julia C. Bell

Theses and Dissertations

The evolving space environment has created a demand for autonomous spacecraft that can maneuver in complex and sometimes contentious environments. Constraint enforcement, such as an avoidance zone to prevent collision with a target, is a key component of autonomous control to ensure safety and performance requirements are met. Finite-horizon Model Predictive Control (MPC) is a popular control method due to its improved computation time while optimizing performance. Two areas of MPC in need of expansion are time-varying constraints and phase transitions in multi-phase applications. In this work, MPC is employed to track the reference trajectory of a multi-phase satellite inspection …

Six Degree-Of-Freedom Mission Planning For Reentry Trajectories, Peter Davis

Theses and Dissertations

Traditional reentry dynamics and planning has typically explored 3 Degrees-of- Freedom (3 DOF) or pseudo 6-DoF problem formulations. This research expands upon previous work and presents a path-constrained optimal control formulation of a fully 6 Degrees-of-Freedom (3 DOF) dynamic system for an unpowered Reentry Vehicle (RV). In a full 6-DoF dynamic system, the translation, rotation and rotational rates are continually tracked. A system of equations of motion are developed to express the dynamics of the RV in terms of defined states and the RV's physical control detections. A neural-network is used to approximate the aerodynamic database of an exemplary RV. …

Improving The Stability And Operability Of A Small-Scale Rotating Detonation Engine, Nathan T. Fiorino

Theses and Dissertations

A small scale RDE was designed with a channel diameter of 28 mm and channel gap of 2 mm and operated on nitrous oxide (N₂O) and ethylene (C₂H₄) as the oxidizer and fuel respectively. Changes to the original Jets in Crossflow (JIC) injection scheme and spark plug ignition method were implemented to counteract previously observed wave instabilities. Successful detonation was observed over a range of mass flows (0.035-0.068 kg/s) and equivalence ratios (ɸ = 0.6-1.4) and a stable single wave mode with frequency up to 16.8 kHz was observed for the first time. Injection …

Sar Collection Planning And Data Quality Assessment, Jacob M. Brumfield

Theses and Dissertations

Radar resource management is an important research topic in the radar community. Identifying the performance of a synthetic aperture radar image early into a data processing chain can improve intelligence collection mission performance. To achieve that goal, separate flags can be presented to a radar technician along a data processing chain to identify various errors within a data collection. Toward the end, this thesis analyzes he radar image processing chain and identifies data quality checks that could be implemented. The first quality check is to identify canonical targets and the necessary Nyquist-Shannon sampling requirements. Then, observations can be made to …

Synthetic Aperture Radar Image Recognition Of Armored Vehicles, Christopher Szul, Torrey J. Wagner, Brent T. Langhals

Faculty Publications

Synthetic Aperture Radar (SAR) imagery is not affected by weather and allows for day-and-night observations, however it can be difficult to interpret. This work applies classical and neural network machine learning techniques to perform image classification of SAR imagery. The Moving and Stationary Target Acquisition and Recognition dataset from the Air Force Research Laboratory was used, which contained 2,987 total observations of the BMP-2, BTR-70, and T-72 vehicles. Using a 75%/25% train/test split, the classical model achieved an average multi-class image recognition accuracy of 70%, while a convolutional neural network was able to achieve a 97% accuracy with lower model …

Prioritizing Facilities Linked To Corporate Strategic Objectives Using A Fuzzy Model, Devin Depalmer, Steven J. Schuldt, Justin D. Delorit

Faculty Publications

Excerpt: Limited facilities operating and modernization budgets require organizations to carefully identify, prioritize and authorize projects to ensure allocated resources align with strategic objectives. Traditional facility prioritization methods using risk matrices can be improved to increase granularity in categorization and avoid mathematical error or human cognitive biases. These limitations restrict the utility of prioritizations and if erroneously used to select projects for funding, they can lead to wasted resources. This paper aims to propose a novel facility prioritization methodology that corrects these assessment design and implementation issues.

Adsorption Of Manganese Ions From Aqueous Solution By Using Manganese Oxide Coated Zeolite, Md. Wasikur Rahman, Huei Ruey Ong, Wendy Yin Jou Kong, Hamidah Abdullah, Md. Maksudur Rahman Khan

Mechanical Engineering Faculty Publications

Manganese oxide coated zeolite (MOCZ) has been demonstrated in the present issue as a potential adsorbent for the removal of manganese (Mn2+) from Mn2+ containing aqueous solution by batch adsorption process. The adsorption capacity of the as-prepared MOCZ was determined over the parameters of contact time, adsorbent dosage, pH and Mn2+ concentration. Surface properties of the MOCZ were analyzed by Brunauer–Emmett–Teller, X-ray diffraction and field emission scanning electron microscopy. Results showed that MOCZ has a high degree of crystallinity and the surface of MOCZ is mainly vernadite (γMnO2) with a specific surface area and average pore diameter of 39.9 m2 …

Design Of Heterogeneous Structured Al Alloys With Wide Processing Window For Laser-Powder Bed Fusion Additive Manufacturing, Saket Thapliyal, Shivakant Shukla, Le Zhou, Holden Hyer, Priyanshi Agrawal, Priyanka Agrawal, Mageshwari Komarasamy, Yongho Sohn, Rajiv S. Mishra

Mechanical Engineering Faculty Research and Publications

Required microstructural attributes of an alloy vary with structural applications. The microstructural fine-tuning capability of laser-powder bed fusion (L-PBF) additive manufacturing (AM) enables application specific manufacture of the components. Such manufacture with L-PBF AM requires alloys that exhibit wide processing window and are amenable to multiple deformation mechanisms. However, high hot cracking susceptibility of Al alloys poses a barrier to such printability-performance synergy. In this work we show that an integration of, a) grain refinement through heterogeneous nucleation, and b) eutectic solidification, leads to crack-free parts at wide range of process parameters, microstructural heterogeneity, and hierarchy in the Al-Ni-Ti-Zr …

High Throughput Mechanical Testing Platform And Application In Metal Additive Manufacturing And Process Optimization, Ke Huang, Chris Kain, Nathalia Diaz-Vallejo, Yongho Sohn, Le Zhou

Mechanical Engineering Faculty Research and Publications

Agility of additive manufacturing (AM) warrants a development of an equally agile, high-throughput properties evaluation technique that can efficiently assess properties of AM specimens as functions of materials and process variables. High throughput (HTP) tensile testing rig has been developed, enabled by miniature sample design and Python based control codes for a full automation of testing and data processing. The rig is capable of testing 60 specimens per hour, much faster than conventional tensile testing. To luminate the merit of its use, an efficient process optimization workflow based on HTP testing is proposed and demonstrated on laser powder bed fusion …

Cyber Social Threats 2021: Ai, Covid-19 Vaccine, Detection And Countering Strategies, Ugur Kursuncu, Jeremy Blackburn, Yelena Mejova, Megan Squire, Amit Sheth

Publications

In recent years, online platforms have been utilized for promoting harmful content and behavior such as extremism, harassment, mis/disinformation, human trafficking, genderbased violence among others affecting our society, often leading to real-world events. Such content and behaviors are inherently complex, making the recognition of these narratives challenging for researchers as well as social media companies. The Cyber Social Threats (CySoc) Workshop 2021 aimed to facilitate a rich forum for researchers and practitioners from both academia and industry in the areas of computing and social science, to discuss novel avenues for research on interdisciplinary aspects of harmful communications on social media, …

Development Of A Decision Support System For Sustainable Water Planning In Abu Dhabi, Uae, Mohamed Ibrahim Kizhisseri

Dissertations

One of the main challenges for water managers is to foresee the future accurately; then, design appropriate policies and infrastructure plans accordingly. The use of decision support systems in the field of water resource management and planning is now widely implemented, but its use in sustainable water planning of a nation or state in arid and semi-arid areas, such as Middle East countries, remains limited. The main objective of this dissertation is to present a graphical software tool that can assist water planners and decision-makers in long-term water management and planning. Sustainable planning for Abu Dhabi’s future water supply is …

Solar Decathlon Competition 2021, Khanh My Fleshman, Ashley H. Kim, Ian Grant Maclean, Erich Peter Fenczik Warnock, Carina Michaela Nani Monaco

Mechanical Engineering

This report is intended to outline all relevant background information, decisions, and design direction for our senior project at California Polytechnic State University, San Luis Obispo. We will be designing net-zero, affordable housing to compete in the attached housing division of the 2021 Department of Energy Solar Decathlon. With the increased urgency of climate change and focus on sustainability in construction, the importance of designing a net-zero structure is very apparent. Because there is a great need for affordable and sustainable housing in Watts, CA, we will be tailoring our design to meet this community’s needs. Details of the Solar …

Inverted Fluorescence Microscope, Matthew B. Pfeiffer, Spencer George Hann, Thomas James Eggenberger, Trevor Lee Blythe

Mechanical Engineering

Team F13 is composed of Trevor Blythe, Spencer Hann, Matthew Pfeiffer, and Thomas Eggenberger. We are all majoring in mechanical engineering and in our final year of study here at Cal Poly San Luis Obispo. This project is a continuation of a 2019-2020 senior project. The previous team designed and built a functioning inverted fluorescence microscope (IFM) from scratch. This device was created as a lab tool for undergraduate students to be able to perform experiments on microfluidic devices constructed in Cal Poly’s Microfabrication Laboratory. Although substantially functional, several design constraints had not yet been met. Our team has improved …

Real-Life Conundrums In The Struggle For Institutional Transformation, Julia Mcquillan, Nestor Hernandez

Department of Sociology: Faculty Publications

Intersecting systems of inequality (i.e., gender and race/ethnicity) are remarkably resistant to change. Many universities, however, seek National Science Foundation Institutional Transformation awards to change processes, procedures, and cultures to make science, technology, engineering, and mathematics (STEM) departments more inclusive. In this article we describe a case study with observations for eight years of before (2000–2007), five during (2008–2013), and seven after (2014–2020) intensive efforts to increase women through reducing barriers and increasing access to women. Finally, we reflect on flawed assumptions built into the proposal, the slow and uneven change in the proportion of women over time, the strengths …

Analysis Of The Implementation Of Fluid Viscous Dampers In A Steel Special Moment Frame, Brad D. Weber

Architectural Engineering

This report examines the effects of adding fluid viscous dampers to a steel special moment frame through a series of analysis methods. Simple analysis procedures are first carried out and described, including a linear static procedure and a linear dynamic procedure. Then further analysis is carried out using a nonlinear dynamic analysis procedure. Multiple parameters are modified throughout the analysis processes to determine the impact on results and the data from all the analysis methods are compiled and used to demonstrate the overall impact of the use of fluid viscous dampers in a steel special moment frame.

Reconceptualizing Mies' Glass House, Araceli Avelar, Armando Castaneda Jr, Madison Lam, Ignatius Malari, Alejo Favero, Augusta Orlauskaite, Ella Gleason

Architectural Engineering

Our team used the glass house studio to explore class stratification, particularly using the glass as a reflection of class dichotomy in our society. The glass and Miesian design approach glorifies the clean cut, picture-perfect utopia only accessible to the wealthy few. But reality proves that there is more to this. As architects and engineers, we should strive to create environments that may uphold our values of equity and diversity and ultimately serve all sectors of society.

The Nolan House, Keiko-Ann K. Sanders, Gilbert C. Munoz, Michael A. Bahr, Titas Kalvalnis

Architectural Engineering

As a precedent, The Green Team analyzed the history of glass architecture, literature, and culture. Based on our research, we found that glass is often depicted as breakable, delicate, and a way to expose or display aspects that would otherwise be hidden. We challenged ourselves to incorporate safety and privacy into our glass house as a way to combat the pre-existing notions of glass in architecture.

Design And Construction Of Modular Concrete Footings And Testing Assembly For Use In Cal Poly's High Bay Laboratory, Thomas Little, Anders Johnson

Architectural Engineering

The purpose of this project was to improve the testing capabilities of the ARCE High Bay lab by designing and fabricating a pair of modular concrete footings along with a reusable testing frame capable of testing full-scale steel moment connections.

Electrocoagulation-Electrooxidation For Mitigating Trace Organic Compounds In Model Drinking Water Sources, Donald R. Ryan, Emily K. Maher, Joe Heffron, Brooke K. Mayer, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

In-situ water treatment can be accomplished using electrochemical treatments such as electrocoagulation (EC), which generates coagulants, and electrooxidation (EO), which generates oxidants (e.g., free chlorine and reactive oxygen species) via electrolysis using boron-doped diamond electrodes. In sequential EC-EO, EC can remove oxidant scavengers present in dissolved organic carbon (DOC), thereby improving the efficacy of downstream oxidation via EO. This study evaluated sequential EC-EO (and each process independently for comparison) for mitigating the trace organic compounds (TOrCs) acyclovir (ACY), trimethoprim (TMP), and benzyldimethyldecylammonium chloride (BAC-C10) in model groundwaters and surface waters. EO-only removed greater than 70% of ACY and TMP but …

Impact Of New Generation Wide-Base Tires On Fuel Consumption, Izak M. Said, Egemen Okte, Jaime Hernandez, Imad L. Al-Qadi

Civil and Environmental Engineering Faculty Research and Publications

This study combined multiple approaches to evaluate the structural and economic impact of using new-generation wide-base tires (NG-WBT) in New Brunswick, Canada. A three-dimensional finite-element model of a typical pavement structure used in New Brunswick was used to predict critical pavement responses. The model includes measured tire-pavement contact forces among other variables overlooked in conventional flexible pavement analysis approaches. Using the model output, regression analysis was performed to predict the responses under various loadings to avoid performing the time-consuming finite-element analysis. Eight-year weight-in-motion data and critical pavement responses were used in transfer functions to predict pavement damage and the corresponding …

Journeyman International: Dwell Being Jonestown, Mississippi, Autumn Wagner

Architectural Engineering

Journeyman International is a non-profit organization that works with countries all over the world to support humanitarian projects by pairing clients with design professionals and volunteers to oversee the design and construction of projects. This specific project partners with Third Lens Ministries and But God Ministries, two organizations that are hoping to empower the community in Jonestown, Mississippi. Dwell Being promotes sustainability and affordable housing in a new housing community in Jonestown that is designed for healthy living and community interaction. Jonestown is a very small 0.4 square acre town that has roots in systemic racism and oppression. A once …

Structural Calculations For Salvation Academy School For Disadvantaged Children, Emma Constance Lambert

Architectural Engineering

Journeyman International is a non-profit organization who partners with students and professionals to provide architectural design, architectural engineering, and construction management work for developing countries in order to combat poverty and ecological destruction on a global scale. The Salvation Academy for Disadvantaged Children is sponsored by Journeyman International and a private client to provide a school campus with a safe and productive environment for children and staff with disabilities. The campus is equipped with classrooms, outdoor gymnasiums, residences for both students and faculty, as well as computer labs and conference areas. The site is located in the Western Area of …

The Impact Of User Control And Transparency In App Design On Privacy Concerns And Behavior Of Mobile App Users, Arwa Alawajy

Dissertations, Theses, and Capstone Projects

Mobile apps have unprecedented access to sensitive personal information. The increasing commodification of mobile-user data motivates us to explore the vital role of app developers in protecting users’ privacy. This dissertation examines the privacy of mobile app users from the perspective of HCI. According to Communication Privacy Management (CPM) theory, people believe they own their personal information and have the right to control how or with whom they share this information. In practice, individuals manage their privacy system and the boundaries between the public and private domain. Users make privacy disclosure decisions according to their individual characteristics and the perceptions …

Applying Deep Learning On Financial Sentiment Analysis, Cuiyuan Wang

Dissertations, Theses, and Capstone Projects

Portfolio Investment has always been appealing to investors and researchers. In the past, people tend to use historical trading information of the securities to predict the return or manage the portfolio. Nowadays, the literature has been proved that the market sentiment could predict asset prices. Specifically, it has been shown that the stock market movement is related to financial news and social media events. Thus, it becomes necessary to extract the sentiment of the financial news. We explicitly introduce the application of dictionary methods, traditional machine learning models and deep learning models on text classification. The experiment results show that …

Efficient Protocols For Multi-Party Computation, Tahereh Jafarikhah

Dissertations, Theses, and Capstone Projects

Secure Multi-Party Computation (MPC) allows a group of parties to compute a join function on their inputs without revealing any information beyond the result of the computation. We demonstrate secure function evaluation protocols for branching programs, where the communication complexity is linear in the size of the inputs, and polynomial in the security parameter. Our result is based on the circular security of the Paillier's encryption scheme. Our work followed the breakthrough results by Boyle et al. [9; 11]. They presented a Homomorphic Secret Sharing scheme which allows the non-interactive computation of Branching Programs over shares of the secret inputs. …

Handheld Transvaginal Probe For Pap Smear Exams, Kim Knollenberg, Taeah Truong

Biomedical Engineering

This project aims to discard the use of the speculum in pap smear exams. A pap smear is a procedure that tests for cervical cancer in individuals assigned female at birth (AFAB) by screening cells collected from the cervix. Speculums are utilized in these examinations, as well as other gynecologic examinations and procedures. Due to the stigma and racist and misogynistic history of the speculum, we moved to design a device that removes the need for specula in pap smear exams. This device will aim to decrease the cervical cancer mortality rate and reduce the stigma around pap smear exams.

3-D Positioning System For Trackable Adjustments Of Papillary Muscles, Ryan Michael Winters, Micaela Andrea Bataclan, Christine Do, Giselle Morales

Biomedical Engineering

Redacted.

Hand Strength And Dexterity Enhancer, Julia Ann Denison, Autumn B. Rexford, Melissa A. Kurani, Christina K. Fong

Biomedical Engineering

Good Grips created the hand strength and dexterity enhancer project to meet the challenge presented by Bill Phelps. He has Inclusion Body Myositis (IBM), an inflammatory muscle disease characterized by progressive muscle weakness and atrophy. Bill has limited strength in both hands and lost the ability to bend his fingers, making it difficult to grip anything. He needed a device that would help with everyday tasks such as writing, lifting, and holding various objects.

Our team consists of four engineering students attending Cal Poly, San Luis Obispo. We researched, designed, manufactured, and tested a device that would fulfill the problem …

Automatic Tourniquet For Military Emergencies, Arshia Nazerani Houshmand, Marina Felt, Blake Juett

Biomedical Engineering

This document contains the progress and development of an automated tourniquet that would be intended for use within the United States military. The project was student-led and sponsored. Coordination and confirmation of our device was provided by Dr. John F. Kragh, who is part of the U.S. Army Institute of Surgical Research. The document will outline the research conducted on tourniquets, specification development of the tourniquet, morphology process, and final design production of the automatic tourniquet.