Engineering Commons^™

Modeling, Control And Analysis Of Inverter-Based Generators In The Power Grids, Yangkun Xu

USF Tampa Graduate Theses and Dissertations

Nowadays, the inverter-based generators (IBGs) has been exponentially integrated into the power grid due to environment and energy saving concerns. However, the high penetration of low inertia IBGs brings new problems on the system stability. The main objectives of this dissertation are to: 1- carry out large-signal analysis to identify the stability issues and small-signal analysis to assess the stability of the power systems, and 2- provide a standard measuring procedure to identify the admittance of IBGs. In addition, investigation on a novel DC-based IBGs architecture is carried out. In this dissertation, one widely used IBG is investigated: Type-4 wind …

Universal Biological Motions For Educational Robot Theatre And Games, Rajesh Venkatachalapathy, Martin Zwick, Adam Slowik, Kai Brooks, Mikhail Mayers, Roman Minko, Tyler Hull, Bliss Brass, Marek Perkowski

Complex Systems Faculty Publications and Presentations

Paper presents a concept that is new to robotics education and social robotics. It is based on theatrical games, in motions for social robots and animatronic robots. Presented here motion model is based on Drift Differential Model from biology and Fokker-Planck equations. This model is used in various areas of science to describe many types of motion. The model was successfully verified on various simulated mobile robots and a motion game of three robots called "Mouse and Cheese."

Estimation Of Able-Bodied Humans Elbow Joint Actions Using Semg And Ann-Based Softmax Classifier, Abdullah Al-Maliki

Theses and Dissertations

The upper limb is a complex part of the human body, and it is necessary to carry on daily tasks and maintain self-dependence. As a result, the daily life of people with upper limb amputation could not be as easy or as free as the more fortunate people without amputation. This work focuses on estimating the upper limb’s angular displacement, speed, acceleration, and torque at the elbow joint, it does so regardless of arm’s orientation and effort level. We do so to enable better control of the myoelectric prosthesis. This work complements the related existing literature, which usually does not …

Data-Informed Decision Support To Improve Pediatric And Maternal Care Quality Under Medicaid Managed Care Settings, Hasan Symum

USF Tampa Graduate Theses and Dissertations

Over the last two decades, the United States has spent almost twice as much per person in healthcare compared to most other wealthy countries. However, this higher spending has not necessarily transformed into improved quality of care; According to World Health Organization reports, the US now ranks 39th for child health and wellbeing and worst in maternal care among developed nations. In terms of proportion of preventable hospital visits, low-risk cesarean sections, and avoidable maternal morbidity/death, the U.S. is among the highest compared with the peer nations. The prevalence of these adverse outcomes in pediatric and obstetric care is particularly …

The Effect Of Room-Temperature Aging On Enthalpy And Dielectric Property Of Carbon-Fiber/Epoxy Composite Prepreg And The Mechanical Property Of Manufactured Composite, Monjur Morshed Rabby, Minhazur Rahman, Partha Pratim Das, Muthu Ram Prabhu Elenchezhian, Relebohile George Qhobosheane, Vamsee Vadlamudi

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

Fiber-based reinforced plastics are widely used materials in different industries - e.g., Automotive, Aerospace, Defense- because of their various advantages. The most reliable raw materials for manufacturing fiber-based composites are pre-impregnated reinforcing fiber (prepreg). However, the limitation of using prepreg lies in its instability at room temperature. Prepregs have a specific out-life which sometimes makes the manufacturing process difficult. The objective of this study is to find out a way to investigate the room temperature aging effect on prepreg by analyzing the enthalpy and dielectric properties. In this study, differential scanning calorimetry (DSC) was used to measure the reaction enthalpy …

Multi-Sensor Data Collection And Fusion Using Autoencoders In Condition Evaluation Of Concrete Bridge Decks, Sepehr Pashoutani, Jinying Zhu, Chungwook Sim, Kwanghee Won, Brian A. Mazzeo, W Spencer Guthrie

Department of Civil and Environmental Engineering: Faculty Publications

This paper presents a multi-sensor data collection and data fusion procedure for nondestructive evaluation/testing (NDE/NDT) of a concrete bridge deck. Three NDE technologies, vertical electrical impedance (VEI), ground-penetrating radar (GPR), and high-definition imaging (HDI) for surface crack detection, were deployed on the bridge deck. A neural network autoencoder was trained to quantify the relationship between VEI and GPR results using the data collected at common positions. This relationship was then used for fusion of VEI and GPR data to increase the reliability and spatial resolution of the NDE measurements and to generate a data-fused condition map that showed novel characteristics. …

Role Of Lithium Doping In P2-Na0.67Ni0.33Mn0.67O2 For Sodium-Ion Batteries, Yingying Xie, Eric Gabriel, Haoyu Zhu, Julie Pipkin, Malia Dustin, Hui Xiong

Materials Science and Engineering Faculty Publications and Presentations

P2-structured Na_0.67Ni_0.33Mn_0.67O₂ (PNNMO) is a promising Na-ion battery cathode material, but its rapid capacity decay during cycling remains a hurdle. Li doping in layered transition-metal oxide (TMO) cathode materials is known to enhance their electrochemical properties. Nevertheless, the influence of Li at different locations in the structure has not been investigated. Here, the crystallographic role and electrochemical impact of lithium on different sites in PNNMO is investigated in Li_xNa_0.67–yNi_0.33Mn_0.67O_2+δ (0.00 ≤ x ≤ 0.2, y = 0, 0.1). Lithium occupancy on prismatic Na …

An Open Web-Based Module Developed To Advance Data-Driven Hydrologic Process Learning, Belize A. Lane, Irene Garousi-Nejad, Melissa A. Gallagher, David G. Tarboton, Emad Habib

Civil and Environmental Engineering Faculty Publications

The era of ‘big data’ promises to provide new hydrologic insights, and open web-based platforms are being developed and adopted by the hydrologic science community to harness these datasets and data services. This shift accompanies advances in hydrology education and the growth of web-based hydrology learning modules, but their capacity to utilize emerging open platforms and data services to enhance student learning through data-driven activities remains largely untapped. Given that generic equations may not easily translate into local or regional solutions, teaching students to explore how well models or equations work in particular settings or to answer specific problems using …

Towards Semantic Integration Of Machine Vision Systems To Aid Manufacturing Event Understanding, Kaishu Xia, Clint Saidy, Max Kirkpatrick, Noble Anumbe, Amit Sheth, Ramy Harik

Publications

A manufacturing paradigm shift from conventional control pyramids to decentralized, service-oriented, and cyber-physical systems (CPSs) is taking place in today’s 4th industrial revolution. Generally accepted roles and implementation recipes of cyber systems are expected to be standardized in the future of manufacturing industry. The authors intend to develop a novel CPS-enabled control architecture that accommodates: (1) intelligent information systems involving domain knowledge, empirical model, and simulation; (2) fast and secured industrial communication networks; (3) cognitive automation by rapid signal analytics and machine learning (ML) based feature extraction; (4) interoperability between machine and human. Semantic integration of process indicators is fundamental …

Agile And Lean Six Sigma Integration: A Leadership Framework, Alessandro Laureani

International Conference on Lean Six Sigma

Submitting final version of the paper attached.

Agile and Lean Six Sigma integration: a Leadership framework

Author: Alessandro Laureani, Independent Lean Six Sigma Scholar, Ireland

E-mail: [email protected] Phone: +353 87 914 4532

Purpose

The purpose of this paper is to illustrate how Agile methodologies and Lean Six Sigma can coexist and propose a Leadership framework to successfully merge Agile methodologies with Lean Six Sigma practice.

Design/methodology/approach

The paper builds on the author’s doctoral thesis on Leadership for Lean Six Sigma, and integrate Agile practices based on the author’s experience in the software development industry.

Findings

Agile methodologies, that came to …

Lss Implementation In Micro Enterprises: Adoption Of Tools To Support Competitiveness, Seamus O'Reilly, Dermot Freeman, Lawrence Dooley

International Conference on Lean Six Sigma

LSS Implementation in Micro Enterprises:

Adoption of tools to support competitiveness

Seamus O’Reilly^a ([email protected]), Dermot Freeman^b ([email protected])

and Lawrence Dooley^a ([email protected])

^aCork University Business School, Ireland. ^bDermot Freeman & Associates, Ireland

Purpose

This study seeks to contribute to an emerging literature addressing Lean Six Sigma (LSS) implementation in the micro enterprise context. Specifically, it explores what LSS tools address business opportunities and challenges identified by micro enterprises.

Methodology

This study adopts a purposive sampling approach. Thirty micro enterprise who had availed of a lean start programme launched by a …

Replicating Lean Six Sigma Green Belt Education, Martinus J. Buijvoets, Bob Walrave, Jukka-Matti Turtiainen, Gregory H. Watson

International Conference on Lean Six Sigma

Purpose – This paper describes the intricates and possibilities of replicating a Lean Six Sigma Green Belt (LSSGB) education model from a pilot program to other universities—employing ‘replication as strategy’—based on a validated ‘business model.’

Study design/methodology/approach – This work is grounded in a case study on the ESTIEM LSSGB educational method and draws on the replication literature. Specifically: (1) replication as strategy (Winter and Szulanski, 2001) to replicate stimulating learning environments, and (2) replicating sets of teaching practices (Baden-Fuller and Winter, 2007). These theories are practiced using data obtained from various sources: Participant-observer data, interview data, and secondary case …

Six Sigma, Sustainability, And It Management: A Research Review And Discussion Of Future Directions, Manal Alduraibi, Timothy Winders, Chad Laux

International Conference on Lean Six Sigma

Abstract

Purpose- Six Sigma is based upon quality improvement by finding the root cause and refining processes to the precision of process outcomes. The purpose of this research was to conduct a systematic literature review (SLR) to explore the Six Sigma techniques and information technology (IT) management concepts to identify the IT management principle's impact on the sustainability of Six Sigma project efforts and identify the gaps that are essential to be addressed through further research. This research also discusses the principles of IT management upon the influence on Six Sigma projects, and subsequent contribution to organizational economic sustainability. An …

Rattle Detection – An Automotive Case Study, Orla Hartley

International Conference on Lean Six Sigma

This case study showcases the use of statistical tools to develop an objective Squeak and Rattle (S&R) measurement and detection test for End Of Line (EOL) sign off in an automotive manufacturing environment. Audio Induced S&R is an unwanted vibration within the vehicle caused by the sound system, impacting on customer perception of vehicle quality. Testing for S&R in an automotive environment has a key challenge; how to robustly detect a rattle at the EOL and thus prevent plant escapes to the customer. The objective test developed used microphones and analysers in order to replace an e subjective listening test. …

The Application Of Measures Of Lean Production For Services, Willem Salentijn, Jiju Antony, Chad Laux

International Conference on Lean Six Sigma

This paper gives insights on how to measure the degree of lean for services and explores existing instruments, proposing adaptions on an existing instrument, developed for production.

Sustaining Continuous Improvement In Public Sector Services Through Double Loop Learning, Chris Buckell Msc, Mairi Macintyre Assoc. Prof.

International Conference on Lean Six Sigma

Abstract

Purpose: Public Service Organisations (PSOs) are facing continuing funding challenges and increased pressure to maintain and improve service delivery with fewer resources. One response, with the promise of improving efficiency rather than cutting services, has been to implement Continuous Improvement (CI) but success has been sporadic and unpredictable. The well documented and pervasive CI methodologies in PSOs, including Lean and Six Sigma, have general agreement across practitioners and scholars alike, thus the reasons behind their potted success must lie elsewhere, in the culture or the environment perhaps? This work explores the wider contextual issues of CI implementation with the …

From Letters To Logistics - The Enabling Role Of A Lean Transformation Programme In A National Postal Service: The Case Of An Post, Ireland, Seamus O'Reilly, Leadiing Edge Group, An Post

International Conference on Lean Six Sigma

From Letters to Logistics - The enabling role of a lean transformation programme

in a national postal service: The case of An Post, Ireland

Seamus O’Reilly (Cork University Business School), David Murray (An Post) and Joe Aherne (Leading Edge Group)

Abstract

Purpose

This paper investigates the role of a lean transformation programme in supporting the transition of a national postal (mail) service from a traditional letter delivery service to a competitive parcel delivery service.

Methodology

Given the objective an intrinsic case study (Stake, 2005) approach was adopted, as this specific case was of interest. To support this approach the researchers …

Breaking The Acoustic Diffraction Limit With An Arbitrary Shape Acoustic Magnifying Lens, Ali Abdolali, Hooman Barati Sedeh, Mohammad Hosein Fakheri, Chen Shen, Fei Sun

Henry M. Rowan College of Engineering Departmental Research

Based on the transformation acoustics methodology, the design principle for achieving an arbitrary shape magnifying lens (ASML) is proposed. Contrary to the previous works, the presented ASML is competent of realizing far-field high resolution images and breaking the diffraction limit, regardless of the position of the utilized sources. Therefore, objects locating within the designed ASML can be properly resolved in the far-field region. It is shown that the obtained material through the theoretical investigations becomes an acoustic null medium (ANM), which has recently gained a significant attention. Besides the homogeneity of ANM, which makes it an implementable material, it is …

Creation And Application Of Various Tools For The Reconstruction, Curation, And Analysis Of Genome-Scale Models Of Metabolism, Wheaton L. Schroeder

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Systems biology uses mathematics tools, modeling, and analysis for holistic understanding and design of biological systems, allowing the investigation of metabolism and the generation of actionable hypotheses based on model analyses. Detailed here are several systems biology tools for model reconstruction, curation, analysis, and application through synthetic biology. The first, OptFill, is a holistic (whole model) and conservative (minimizing change) tool to aid in genome-scale model (GSM) reconstructions by filling metabolic gaps caused by lack of system knowledge. This is accomplished through Mixed Integer Linear Programming (MILP), one step of which may also be independently used as an additional curation …

Early-Age Strength Of Co2 Cured Alkali-Activated Blast Furnace Slag Pastes, Yubin Jun, Seong Ho Han, Jae Hong Kim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The effect of CO₂ curing including pre-conditioning on alkali-activated slags, activated by different alkaline activators (NaOH, Na₂SiO₃, and KOH solution), is studied. While dry pre-conditioning before the CO₂ curing increases the strengths of all mixtures, the effect of pre-conditioning time is dependent on the alkali activator used to produce samples. The CO₃-bearing reaction product in samples also depends on the alkali activator. Gaylussite, pirssonite, hydrotalcite, and calcite are observed in the NaOH activator, and calcite, hydrotalcite, and C₄AcH₁₁ are detected in the NaOH and Na₂SiO₃ (9:1) …

Performance Evaluation Of 5g Cloud Radio Access Networks Using New Fading Channel Models, Ayad Nafe Bihnam

Theses and Dissertations

The exponential demand for high-speed networks and data processing forces mobile network operators to develop new solutions to cope with the current indigence. The desire for more reliable, power-efficient, cost-efficient networks arises due to increasing smartphones, tablets, and applications that demand data-hungry applications. Various solutions and technologies have been proposed to cope with these challenges where Cloud Radio Access Network (C-RAN) is one among many others. In C-RAN, the baseband units are decoupled from the Remote Radio Heads (RRHs) and transferred to the cloud to enable centralized, supporting, controlling, and data processing. The RRHs, on the other hand, are considered …

Phasor Domain Modeling Of Type-Iii Wind Turbines, Mohammed Alqahtani

USF Tampa Graduate Theses and Dissertations

This dissertation research focuses on developing an accurate steady-state phasor model for Doubly Fed Induction Generator (DFIG)-based wind turbines (Type-III WTs). Unlike the classical synchronous or asynchronous generators, Type-III WTs are electronically coupled to the power grid. The steady-state and dynamic responses of the DFIG-based WTs depend on the behavior of the converters controllers. Accurate modeling requires reproducing the behavior of the power electronics and the control system for various operating scenarios. The analysis of this research area is carried out in two stages or tasks. The first task focuses on the balanced stator voltage situation, while the unbalanced stator …

Porous Scaffold And Soft Hydrogel Composite For Biomedical Applications, Matthew Dicerbo

Theses and Dissertations

Biophysical signals including stiffness and dimensionality influence a myriad of stem cell behaviors including morphology, mechanosensing, and differentiation. 2D stiff environments cause increased cellular spreading and induce osteogenic differentiation whereas 3D soft environments favor rounder cell morphologies attributed to a chondrogenic phenotype. The goal of this study is to create a composite that integrates these divergent biophysical signals within one system. This composite consists of a stiff and porous polycaprolactone (PCL) backbone that provides mechanical stiffness and a 2D environment. The PCL backbone is then perfused with mesenchymal stem cells (MSCs) and a soft methacrylated gelatin (GelMe) hydrogel to provide …

Leaf Cutter Ant Nest Soil Cement Stabilized Earthen Bricks: Materials And Methods For Engineering Field Applications, Faith Malay

USF Tampa Graduate Theses and Dissertations

As climate change threatens vulnerable tropical climates and development outpaces resource availability, the need for diverse construction material grows. The United Nations Sustainable Development Goals aim to reduce poverty in all forms. Diversifying construction material works toward reducing indoor air pollution, the eradication of houselessness, encouraging diversification in industry, and supporting small scale industrialization. In the Province of Bocas del Toro in Panama, there is a tenuous connection to the greater industries in the country due to location and existing infrastructure.This research presents a literature review of the historical approaches to the construction and chemistry of cement stabilized earth bricks, …

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• IT Professor Katz comments on the latest ransomware attack on St. Joseph’s Candler
• IT Professor Katz comments on the latest ransomware attack on St. Joseph’s Candler

Experimental Investigation Of The Performance Of A Hybrid Self-Healing System In Porous Asphalt Under Fatigue Loadings, Shi Xu, Liu Xueyan, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, which is designed to achieve autonomic damage repair in asphalt pavement, offers a great life-extension prospect and therefore not only reduces pavement maintenance costs but also saves energy and reduces CO2 emissions. The combined asphalt self-healing system, incorporating both encapsulated rejuvenator and induction heating, can heal cracks with melted binder and aged binder rejuvenation, and the synergistic effect of the two technologies shows significant advantages in healing efficiency over the single self-healing method. This study explores the fatigue life extension prospect of the combined healing system in porous asphalt. To this aim, porous asphalt (PA) test specimens with …

The Role Of Scenography In The Narration Of The Inner Space Of Contemporary Museums Through Employment The Space Staging, Shamael M. W. Al-Dabbagh, Dania Saleh Yaheia Al-Jaboury

Al-Esraa University College Journal for Engineering Sciences

In the recent period, several design mechanisms have emerged related to the design of internal spaces in architecture, specifically the museum spaces and associated with exhibitions, and the most important of these scenographic mechanisms are clearly and significantly adopted in the field of theater to design the stage and the scene that embodies the narrative vision and the idea of the theater director and scenographic designer to express what the text wants from Anecdotal expressing the objectives of the product of the text, therefore the research aimed to delve into the effect of the scenography mechanism on the contemporary architectural …

Evaluating The Performance Of The Jadriya Water Project For Water Treatment, Rana Mohammed Rasheed

Al-Esraa University College Journal for Engineering Sciences

For the purpose of evaluating the performance of the Al-Jadriya water project, water samples were taken before and after the sedimentation basins to find out the efficiency of the sedimentation ponds, as well as water samples were taken before and after the filtration basins, to know the efficiency of the filtration basins by conducting the following tests on them (Turbidity, TDS, TC, pH) to ensure that these ponds work properly. It was found that the efficiency rate of sedimentation ponds was 83%, which indicates the inefficiency of these ponds, as well as the inefficiency of the fast and slow mixing …

Possible Developments Of The Industrialization Of Appropriate Building Subsystem For Iraq, Wisam William Saleem Al-Ayoubi

Al-Esraa University College Journal for Engineering Sciences

Industrialization of building has developed very rapidly in industrialized countries as well as in many other parts of the world to fulfill the need for housing and public buildings after the Second World War. Prefabricated building is defined as a type of building that consists of several elements or modular units prepared in advance and assembled on-site. The term prefabricated indicates that these building elements are manufactured in the workshop or factory and then combined with other elements. Iraq has witnessed vital development in the construction industry sector. The study investigates the appropriate technology for Iraq, considering resources, economy, labor, …

Ion Exchange Method For Sulphate Removal From Treated Wastewater Of Al-Doura Refinery, Rana Mohammed Rasheed

Al-Esraa University College Journal for Engineering Sciences

The treated wastewater by the industrial Wastewater Treatment Plant (WWTP), commonly named (INGECO) in Al-Doura refinery, suffers from highly sulfate concentrations that exceed the EPA specified limits of 250 mg/L. Laboratory water quality historical data have been reviewed and analyzed to determine the annual rate, maximum, and peak sulfate concentrations, which were found to be 360 mg/L, 425 mg/L, and 550 mg/L, respectively. A field inspection was conducted to identify the reasons for the high sulfate concentrations in the wastewater of most refinery process units. It was found that the maximum required sulfate remaining concentration should not exceed 10 mg/L …