Engineering Commons^™

Stress Analysis Based On Ecg And Eeg, Eyad Talal Attar

Theses and Dissertations

Stress is a significant risk factor for various diseases such as hypertension, heart attack, stroke, and even sudden death. In many studies, stress is linked to decision making, performance, and learning. The heart rate variability (HRV) can be measured from the Electrocardiogram (ECG) and is defined as the variation of the interval between two consecutive heartbeats (heart rate). Heart rate variability is also an indicator of the balance between the sympathetic and parasympathetic branches of the autonomic nervous system. HRV refers to variations of heart rate in a certain amount of time. Heart rate variability (HRV) is a relatively new …

Addressing The ‘Unseens’: Digital Wellbeing In The Remote Workplace, Holtjona Galanxhi, Fiona Fui-Hoon Nah

Research Collection School Of Computing and Information Systems

The ubiquity of sophisticated devices, along with uninterrupted access to the Internet and organizational computerized systems, allows for the “anyplace” workplace to be established. Technology has the potential to deliberately or inadvertently impact psychological wellbeing. Specific psychological demands are inadvertently imposed on remote employees whose permanent online presence is required. Hence, it is important to understand factors affecting digital wellbeing and steps that can be taken to maximize the wellbeing of remote employees. This paper provides suggestions for future research on studying the digital wellbeing of (fully or partially) remote employees. A research framework is proposed to demonstrate the different …

Users’ Reception Of Product Recommendations: Analyses Based On Eye Tracking Data, Feiyan Jia, Yani Shi, Choon Ling Sia, Chuan-Hoo Tan, Fiona Fui-Hoon Nah, Keng Siau

Research Collection School Of Computing and Information Systems

Based on eye tracking technology, we study consumers’ overall attention to recommendations appearing at different time settings (i.e., early, mid, and late) and their attention to different information contained in each recommendation, such as recommendation signs, product descriptions, and reviews. By investigating consumers’ eye movement patterns and attention distributions on recommendations, we open the “black box” of why consumers’ reception to recommendations appearing at different time settings varies. The product preference construction literature and mindset theory help to explain why the early recommendations receive the most attention. The need for justification helps to explain why the late recommendations should receive …

Enhanced Solar Receiver Design: Using Modern Materials And Manufacturing Methods, Paul John Kepinski

Theses and Dissertations

Solar receivers are a core component in receiver technology used for solar thermal power plants that use mirror reflectors to concentrate solar radiation onto a single point. This point is where the solar receiver is located. The energy is transferred into a medium that can either be stored for overnight power needs or can be used immediately to generate steam to power an electrical grid. The purpose of this research is to see if efficiency of a solar receiver can be increased substantially using newer methods of 3D metal manufacturing and material sciences. The recommended solution is a cavity shaped …

Scaffolding Student Success: Developing A Culturally Responsive Approach To Support Underrepresented Minorities In Engineering Undergraduate Research, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

In this research study, a scaffolding technique is implemented in undergraduate research to cultivate and enhance engineering related aptitudes and stimulate additional experience that will allow underrepresented minority students to fully engage in communication and leadership roles post-graduation. Developing and supporting the growth of underrepresented minorities as leaders who make significant innovative contributions to the global and interconnected scientific society requires awareness of contextual issues that shape their educational experiences and a commitment to enact on a framework that blends technical, communication, and leadership skills in undergraduate engineering education. In the context of this four year study, a total of …

Mechanisms Of Spontaneous Curvature Inversion In Compressed Graphene Ripples For Energy Harvesting Applications Via Molecular Dynamics Simulations, James M. Mangum, Ferdinand Harerimana, Millicent N. Gikunda, Paul M. Thibado

Physics Faculty Publications and Presentations

Electrically conductive, highly flexible graphene membranes hold great promise for harvesting energy from ambient vibrations. For this study, we built numerous three-dimensional graphene ripples, with each featuring a different amount of compression, and performed molecular dynamics simulations at elevated temperatures. These ripples have a convex cosine shape, then spontaneously invert their curvature to concave. The average time between inversion events increases with compression. We use this to determine how the energy barrier height depends on strain. A typical convex-to-concave curvature inversion process begins when the ripple’s maximum shifts sideways from the normal central position toward the fixed outer edge. The …

Implications Between Uav And Atm Systems In Commercial Airspace Incorporation: Dissertation Defense, Linda Vee Weiland

Publications

Dissertation Defense:

• Human Factors associated with sUAS operations come in an assortment of characteristics, and they are inadequately represented in literature that focuses on the perspective of the air traffic controller as the center of the HITL environment.
• This may impact the safe integration of civilian sUAS as they continue to integrate in the NAS.
• Leads to concern for safety, efficiency, and workload optimization for controllers.
• Shows gaps in related knowledge

Implications Between Uav And Atm Systems In Commercial Airspace Incorporation, Linda Vee Weiland

Publications

The integration of sUAS in commercial airspace is complicated and faces many challenges to ensure a safe and secure incorporation into the National Airspace System (NAS). This research analyzes the interconnectedness between the air traffic controller and the sUAS through HF implications when sUAS enter the NAS. To mitigate negative consequences in the integration, it examined the human performance of the controllers, the sUAS operators, commercial pilots, and the equipment. This study used a quantitative research approach from both the Software Hardware Environment, Liveware, and Liveware (SHELL), and the Swiss Cheese models (SCM) for analysis of UAS sightings that are …

The Importance Of Strategic Communication For Building Employee Resource Groups In Aviation, Lynnette Darnell

Doctoral Dissertations and Projects

In this qualitative case study, the research explores the importance of strategic communication for building employee resource groups in aviation, specifically at a regional airline. To expand and develop knowledge regarding employee resource groups, the researcher looks at a widely distributed workforce to understand how the lack of strategically planned communication can impact employee resource group development and employee engagement. The data were collected through semi-structured interviews and a focus group of the employee resource group members, which provided insight on their experience engaging with the employee resource groups, preferred communication methods and tools, and their perception of leadership involvement. …

Women And Bipoc In Aerospace: Where Did They Come From And How Did They Get Here?, Tracy L. Yother, Anne M. Lucietto, Geanie Umberger, Mary E. Johnson

School of Engineering Technology Faculty Publications

The low number of women and black, indigenous, and people of color (BIPOC) compared to their population, is well-documented in engineering, engineering technology, and other STEM fields. Through this and ancillary documentation there is agreement that increasing the numbers of women and other minorities in these areas will enhance productivity and the breadth of new innovation. Many efforts have been made to increase the number of women and BIPOC in STEM fields. The result of those efforts has been disappointing as they have resulted in minimal growth in engineering and virtual stagnation in other areas of STEM. The aviation and …

Study Of Organizational Knowledge Retention Practices In The Utilities, Eric G. Barnfather Jr., Kelly A. Mcfall, Anne M. Lucietto

School of Engineering Technology Faculty Publications

One key to the successful and long-term survival of an organization involves knowledge capture and retention. The knowledge may include company secrets, lessons learned, and hard-earned best-practices that are lost, forgotten, or disorganized in the event of staff loss or early retirement. In the United States, the aging workforce poses a specific difficulty vis a vie utility workers. Many are quickly approaching retirement and operations staff are heavily impacted by this movement. Properly capturing and retaining employee’s tacit knowledge is a labor-intensive task as it is usually transferred through personal observation with demonstration, mentors, apprenticeships, or on-the-job training. Consequently, articulating …

The Development Of Techie Times, Brian D. Tedeschi, Julia K. Miller, Anne M. Lucietto, Nancy L. Denton

School of Engineering Technology Faculty Publications

Summer 2020 provided the motivation and opportunity to move summer outreach programs into the virtual world. Faculty and students in the Purdue University School of Engineering Technology moved face-to-face programs into a middle school program called Techie Times. This program was designed to provide students with an organized platform occurring just before the school year started, allowing them to learn at home, working with family, or independently. The program was designed to take place nonconsecutively over eight days, covering five various STEM topics. Some of these activities were already a part of the middle school curriculum; others were not. That …

Academic And Industry Collaboration: A Literature Review, Anne M. Lucietto, Diane L. Peters, Meher Rusi Taleyarkhan, Shelly Tan

School of Engineering Technology Faculty Publications

As part of a larger project determining best practices for establishing and maintaining effective, sustainable, collaborative relationships between academic and industry professionals, this review will outline the available materials and, conversely, the multiple gaps that exist regarding course content, methods of teaching, and practical experience relating to preparation for careers in engineering and engineering technology. Currently, there is no clear agreement on which principles and practices best enable industrial partners and academic institutions to establish and maintain mutually-beneficial partnerships. In fact, there is no clear definition in the literature of what a mutually-beneficial partnership entails, across the full range of …

Active Experiential Learning At A Distance, Zach Schreiber, Robert J. Herrick, Anne M. Lucietto

School of Engineering Technology Faculty Publications

E-learning became the mode of instruction for students worldwide during the COVID-19 pandemic. Instruction was forced onto numerous online platforms quickly, some seamlessly and some not. For those not well versed in online education, the move of all forms of education, including hands-on, laboratory experiential learning, deprived students of new experiences, skills, and knowledge due to a lack of provisions to perform remotely. Uncertain of the pandemic’s duration as well as the future of hands-on education, these authors investigated new technology, equipment, and experiments that would provide a hands-on laboratory experience performed by students at a distance. In response to …

Scholarly Communication On Web 3.0: An Analysis Based On Web Of Science, Arunkumar V R

Library Philosophy and Practice (e-journal)

For investigating the structure and process of academic communication, bibliometrics provides an excellent set of methodologies and measures. Web 3.0 is a concept that incorporates artificial intelligence and other advanced technologies and brings forth new opportunities and challenges to information scientists. The present study provides an evaluation of the scientific productivity related to Web 3.0 technologies in Web of Science (WoS) during the period of 2007 to 2020. The country-wise distribution of the literature revealed that the majorities (22.330%) of the documents were published from the USA, followed by Spain, and scholarly output of Web 3.0 literature received a total …

Flood Hazard Mapping And Assessment Of Precipitation Monitoring System Using Gis-Based Morphometric Analysis And Trmm Data: A Case Study Of The Wadi Qena Watershed, Egypt, Wael M. Elsadek, Wael E. Mahmod, Mona G. Ibrahim

Applied Environmental Research

Wadi Qena is one of the Nile Valley areas particularly at risk of severe flash flooding, located in Egypt. The study aims to verify TRMM rainfall data (TRMM 3B42), using eight stations across Egypt as well as relies on morphometric analysis to generate a flood risk map based on the ranking method. Three process could be recognized through the study, calibration, correction and verification processes. The results discuss the match daily rainfall trends of TRMM and observed data, producing a correction equation for TRMM data with root mean square error (RMSE) value of 0.837 mm d-1 and R2= 0.238 (calibration …

Biochar From Rice Husk As Efficient Biosorbent For Procion Red Removal From Aqueous Systems, Neza R. Palapa, Tarmizi Taher, Novie Juleanti, Normah Normah, Aldes Lesbani

Applied Environmental Research

Numerous reports have elucidated the use of biochar (BC) to adsorb dyes from wastewater. However, its applicability for adsorbing Procion Red, which causes carcinogenic and mutagenic effects on aquatic life, has not been studied. In this work, biochar produced from rice husk in Sumatera, Indonesia was used as a biosorbent for Procion Red removal from aqueous systems. Rice husk-BC was characterised using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, surface area specific analysis, and scanning electron microscopy (SEM) for mor-phological analysis. The characterisation showed a (002) reflection peak at 2θ = 23° with broad and quite intense diffraction, which …

Pore-Resolving Simulations To Study The Impacts Of Char Morphology On Zone Ii Combustion And Effectiveness Factor Models, Dongyu Liang, Simcha L. Singer

Mechanical Engineering Faculty Research and Publications

Combustion and gasification of pulverized char often occur under zone II conditions, in which the rate of conversion depends on both heterogeneous reaction and gas transport within the particle's porous structure. The morphology of porous char has a strong influence on intra-particle diffusion, and thus, on the overall conversion rate. Because pulverized coal and biomass char particles are often irregularly shaped and contain pores and voids which can approach the size of the particles themselves, conventional models based on spherical symmetry and coarse-grained, upscaled, effective continuum conservation equations are not applicable or appropriate. A recent 3-D, pore-resolving CFD simulation approach …

Multi-Robot Path Planning Using Sampling-Based Algorithms And Reinforcement Learning, Donald J. Alexander

Master's Theses

In today’s world, robots are becoming extremely useful in many facets of life. With the recent increase in applicable uses of robots, multi-robot path planning has emerged as a fundamental research area. Multi-robot path planning is the process of developing a coordinated plan which is utilized by multiple robots to efficiently work together to complete a common goal. Over the history of multi-robot path planning, many new path planning methodologies have been developed with the goal of outperforming the last, boasting better efficiency and optimality. In this thesis, an analysis of various multi-robot path planning methodologies is carried out with …

Monitoring The Land Cover Changes In Mangrove Areas And Urbanization Using Normalized Difference Vegetation Index And Normalized Difference Built-Up Index In Krabi Estuary Wetland, Krabi Province, Thailand, Katawut Waiyasusri

Applied Environmental Research

Krabi Estuary Wetland (KEW) is an outstanding wetland with an estuary environment. At present, the tourism industry has rapidly grown, resulting in the impact of land cover changes. This research aims to assess the changes that have occurred in the KEW from 1999 to 2020 using NDVI and NDBI for monitoring changes in mangrove areas and urbanization in Krabi Province, Thailand. Landsat satellite images in years 1999, 2009 and 2020 were classified by using a band ratio to create land cover maps. The results show that NDVI between 0.41–1.00 clearly shows the mangrove forest area, while NDBI between 0.01–0.40 shows …

Application Of Gis And Multi-Criteria Statistical Techniques In Assessing Water Quality In The Coastal Province Of Vietnamese Mekong Delta, Giao Thanh Nguyen, Thi Hong Nhien Huynh

Applied Environmental Research

The study was conducted to evaluate the quality and spatial distribution of surface water quality in Soc Trang, a coastal province using Geographic information system (GIS) and multivariate statistical analysis. Water monitoring data was collected from 19 sampling locations with 19 parameters were analyzed from February 2019 to August 2020. The results indicated that water quality was contaminated with organic matters, nutrients, coliforms and salinity. Water quality index (WQI=22–73) indicated that water quality was from poor to medium level. Cluster analysis (CA) classified 19 monitoring sites into 7 groups and 19 months into 3 seasons including rainy season, rainy season-early …

Adsorption Of Methylene Blue By Low-Cost Biochar Derived From Elephant Dung, Yanasinee Suma, Nittaya Pasukphun, Numfon Eaktasang

Applied Environmental Research

Elephant dung biochar (ED350) prepared by controlled heating at 350 ºC was used to adsorb methylene blue (MB) in an aqueous solution. The effects of adsorption time, pH, adsorbent dosage, and initial MB concentration were examined. Kinetic, isotherm, and thermo-dynamic models were then further analyzed to determine the adsorption. The results show that ED350 was found to be efficient within 180 min. The optimum pH of MB adsorption was 11. The Langmuir isotherm model was found to be the most suitable fit for the adsorption equilibrium data, with ED350 having a homogeneous surface. The calculated equilibrium parameter (RL) …

A Workforce And Truck Allocation Model In A Solid Waste Management System: A Case From Nigeria, Desmond E. Ighravwe, Sunday A. Oke

Applied Environmental Research

No abstract provided.

Spatiotemporal Flood Risk Determination And Management For A Large River Basin, Nuanchan Singkran

Applied Environmental Research

No abstract provided.

Synergistic Effect Of Waste Feedstock Mixture And Torrefaction Pre-Treatment On Some Briquette Characteristics Of Cornhusk And Sawdust Wastes, Mufutau A. Waheed, Opeyemi A. Akogun

Applied Environmental Research

Agricultural waste management through energy recovery is one of the critical options that could drive the clean energy production industry and properly replace the use of coal in Nigeria if done sustainably. The objective of this work therefore is to study the synergetic effect of waste feedstock mixture and torrefaction pre-treatment on some physical and performance characteristics of briquettes from cornhusk (CH) and sawdust (SD) wastes. In this work, CH and SD wastes were processed raw and torrefied at 200 to 300 °C and were mixed in the ratios between 90/10 and 10/90 for briquette production using D-optimal crossed design. …

Event-Triggered Control Architectures For Scheduling Information Exchange In Uncertain And Multiagent Systems, Stefan Ristevski

USF Tampa Graduate Theses and Dissertations

Despite the numerous advantages that networked controlled systems provide, potential network overload in these systems can severely degrade their performance and even cause catastrophic failures. To this end, the work presented in this dissertation provides a neat solution on reducing network utilization in uncertain networked controlled systems using an adaptive event-triggered control approach predicated on a novel dynamical threshold and information exchange methodology while guaranteeing closed-loop system stability.

In particular, consider a system consisting of an operator (e.g, a ground station) and an uncertain controlled dynamical system (e.g., a vehicle equipped with feedback control algorithm), where the aim of the …

Interrelation Of Thermal Stimulation With Haptic Perception, Emotion, And Memory, Mehdi Hojatmadani

USF Tampa Graduate Theses and Dissertations

Haptics is an interdisciplinary field of science that deals with how humans perceive and respond to different sensory cues perceived through touch. Thermal haptics as a branch deals with how humans perceive the temperature sensation and respond to that. The process in which thermal perception occurs is well known to researchers. What seems missing in the literature is how temperature interacts or sometimes intervenes in other physiological and psychological aspects of our lives. In this research, a series of studies are presented where the main focus was how temperature and brain interact with each other to impede or enhance our …

Assessment Of Heat-Affected Zone Softening Of Hot-Press-Formed Steel Over 2.0 Gpa Tensile Strength With Bead-On-Plate Laser Welding, Kwangsoo Kim, Namhyun Kang, Minjung Kang, Cheolhee Kim

Mechanical and Materials Engineering Faculty Publications and Presentations

High-strength hot-press-formed (HPF) steels with a fully martensitic microstructure are being widely used in the fabrication of automotive body structure, and 2.0 GPa-strength HPF steel has recently been commercially launched. However, heat-affected zone (HAZ) softening is unavoidable in welding martensitic steel. In this study, the HAZ softening characteristic of 2.0 GPa HPF steel was investigated by applying a high-brightness laser welding process, wherein the heat input was controlled by varying the welding speed. Microstructural evaluation and hardness test results showed that the base metal with a fully martensitic microstructure was changed to the same type of fully martensitic microstructure in …

Anatomical Correlates Of Age-Related Basal Forebrain Dysfunction, Brandy Lynn Somera

Theses and Dissertations

The basal forebrain (BF) is comprised of several nuclei including the substantia innominata, medial septum, nucleus basalis and diagonal band of broca which are involved in cognitive functions including attention, motivation, and arousal. BF neurons are particularly vulnerable to dysfunction and degeneration in aged humans and, more dramatically, in diseases such as Alzheimer's disease (AD). Age-related BF dysfunction may reflect diminished afferent regulation as well as an altered local glial environment. Our lab has previously shown reduced orexin/hypocretin innervation of BF in aging, a phenomenon that may link afferent dysfunction with altered microglial homeostasis. There is little research examining these …

Simulation-Based And Data-Driven Approaches To Industrial Digital Twinning Towards Autonomous Smart Manufacturing Systems, Kaishu Xia

Theses and Dissertations

A manufacturing paradigm shift from conventional control pyramids to decentralized, service-oriented, and cyber-physical systems (CPSs) is taking place in today’s Industry 4.0 revolution. Generally accepted roles and implementation recipes of cyber systems are expected to be standardized in the future of manufacturing industry. Developing affordable and customizable cyber-physical production system (CPPS) and digital twin implementations infuses new vitality for current Industry 4.0 and Smart Manufacturing initiatives. Specially, Smart Manufacturing systems are currently looking for methods to connect factories to control processes in a more dynamic and open environment by filling the gaps between virtual and physical systems.

The work presented …