Engineering Commons^™

Discrete Rigid Block Analysis To Assess Settlement Induced Damage In Unreinforced Masonry Façades, Ryan Ehresman, Nathan Taylor, Bora Pulatsu, Ece Erdogmus

Durham School of Architectural Engineering and Construction: Faculty Publications

In this study, a system of discontinuous rigid blocks is employed to simulate the possible damage mechanisms in unreinforced masonry (URM) façades and load-bearing frame systems subjected to settlement using the discrete element method (DEM). First, the employed modeling strategy is validated utilizing the available experimental results presented in the literature. Once there is a good agreement between the computational models and experimental findings, a sensitivity analysis is performed to quantify the influence of the input parameters defined in the DEM-based numerical model. Finally, the proposed modeling strategy is further utilized to assess the damage pattern that may develop in …

Computational Fluid Dynamics (Cfd) Analysis Of The Hydraulic Performance And Bio-Kinetics In A Full-Scale Oxidation Ditch, Kiesha C. Pierre

USF Tampa Graduate Theses and Dissertations

An oxidation ditch is a biological wastewater treatment unit process where microorganisms are utilized to transform organic matter, and nitrogen from wastewater to meet the desirable effluent concentrations. Mechanical aerators are part of these biological reactors facilitating oxygen transfer for the aerobic microorganisms, while agitating and circulating the phase constituents within the ditch. Modeling the performance of an oxidation ditch involves combining hydrodynamics, oxygen mass transfer, and bio-kinetics and is one of the grand challenges that is of paramount importance in optimization of design and operations of these facilities in an energy efficient way while meeting the targeted effluent concentrations. …

Mutational Analysis Of Latency Associated Peptide For Therapeutic Application, Johnny Will Stephens

USF Tampa Graduate Theses and Dissertations

TGF-β is an important protein for regulation of the immune system, and has been linked to promotion of tumor progression and cancer growth. Inhibiting TGF-β has been shown to be an effective therapeutic technique for fighting multiple cancer types. Engineering TGF-β’s natural inhibitor, Latency Associated Peptide (LAP), to improve its biophysical properties has potential to increase therapeutic efficacy.

Rosetta and FoldX can be used in concert to engineer stabilizing mutations of proteins. In accordance with this, PyRosetta and FoldX were used to predict stabilizing mutations of LAP. The most stabilizing mutations from each program were combined with mutually predicted mutations. …

Final 2021 Residential Metals Abatement Program (Rmap) School Soil Sampling Field Sampling Plan (Fsp) Submittal #1 (Covering Ramsay Elementary School), Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Performance Evaluation Of Gas Lift Valves Using Numerical Simulation, Felipe Simoes Maciel

LSU Master's Theses

This work aimed to assess the performance of two numerical simulation methods to replicate flow capacity test (FCT) results and predict the flow coefficient (Cv) and critical pressure ratio (Rcp) of gas lift valves (GLVs). FCT's use a modified GLV with an adjustable stem positioning system to obtain pressure as a function of flow rate for different stem positions to calculate Cv and Rcp. Therefore, this study used both a one-dimensional (1D) mechanistic model and computational fluid dynamics (CFD) to predict the same variable from the FCT without tests using modified GLVs. This methodology demonstrates accurate results, which were compared …

Bibliometric Review Of Fpga Based Implementation Of Cnn, Priti Shahane, Piyush Tyagi, Purba Saha, Shravan Sainath, Swanand Bedekar

Library Philosophy and Practice (e-journal)

Nowadays Convolution Neural Network (CNN) has become the state of the art for machine learning algorithms due to their high accuracy. However, implementation of CNN algorithms on hardware platforms becomes challenging due to high computation complexity, memory bandwidth and power consumption. Hardware accelerators such as Graphics Processing Unit (GPU), Field Programmable Gate Array (FPGA), Application Specific Integrated Circuit (ASIC) are suitable platforms to model CNN algorithms. Recently FPGAs have been considered as an attractive platform for CNN implementation. Modern FPGAs have various embedded hardware and software blocks such as a soft processor, DSP slice and memory blocks. These embedded resources …

Spatial Analysis Of Wind In Jordan To Determine The Suitable Locations For Establishment Of Renewable Power Stations, محمد زيتون

Jerash for Research and Studies Journal مجلة جرش للبحوث والدراسات

The aim of this study is to analyze wind data in terms of speed and direction in 24 meteorological stations spreading over different areas in Jordan such as Jordan Valley, the Eastern Highlands, and Southern and Eastern Badia. Annual, seasonal and monthly averages of the winds data were analyzed to estimate the density of potential power in every meteorological station. The results show that the wind trends in Jordan are mostly the western trend. This has been found in spring and autumn with a speed ranges between 280-285º and 260-265º respectively. Furthermore, northwest winds were found in summer whereas south-west …

Vertical Feature Delineation For Flood Hazard Assessments At The Coastal Land Margin, Shu Gao

LSU Doctoral Dissertations

Coastal and riverine flooding constitutes a major environmental hazard that affect millions of people residing along the world’s coastline. Improved understanding of the driving mechanisms that can cause flooding within coastal watersheds requires advanced hydrologic and coastal storm surge simulation. Such advanced simulation is dependent upon an accurate digital elevation model (DEM) for the optimal topographical representation of the true domain in the discretized model grid (mesh). However, it is not possible to afford mesh resolution as fine as contemporary DEMs, resolved at sub-10 meters, due to the impractical computational expense. Therefore, significant elevation barriers such as roadbeds, levees, railroads, …

Propositions For A Resilient, Post-Covid-19 Future For The Aec Industry, Hala Nassereddine, Kyung Wook Seo, Zofia K. Rybkowski, Christian Schranz, Harald Urban

Civil Engineering Faculty Publications

The coronavirus outbreak has challenged and continues to challenge every aspect of the supply chain within the AEC industry, forcing stakeholders to cope with increasing uncertainties and continuous change. The notion of resilience is especially salient now. While the need for the AEC industry to focus on resilience has been highlighted in recent articles, there is a need for a comprehensive discussion on what resilience means for the AEC industry and how companies can create built-in resilience. This paper takes the form of a high-level overview of where the industry is headed and aims to establish eleven propositions for a …

Practicing Self-Regulation Of Cognition And Motivation During Problem Solving In Engineering And Mathematics, Oenardi Lawanto

Funded Research Records

No abstract provided.

Precision Maritime Landing Of Autonomous Multirotor Aircraft With Real-Time Kinematic Gnss, Matthew Kent Rydalch

Theses and Dissertations

In this thesis two methods were developed for precise maritime landing of an autonomous multirotor aircraft based on real-time kinematic (RTK) Global Navigation Satellite System (GNSS). The first method called RTK-localized method (RLM) uses RTK GNSS measurements to localize a sea vessel and execute the landing. RLM was demonstrated outdoors in hardware and landed on a physically simulated boat called a mock-boat with an average landing error of 9.7 cm. The mock-boat was actuated to have boat-like motion and a forward velocity of ~2 m/s. This method showed that accurate landing is possible with RTK GNSS as the primary means …

Spinning Behaviour Of Egyptian Cotton/Waste Blends On Open End Spinning System., S. Ibrahim, Rizk El-Beally

Mansoura Engineering Journal

Long and medium cotton wastes, either individually or blended with lower grades of cotton were blended to produce open-end yarns. The effect of blending ratios of the waste on the properties of produced yarn have been exaimend. Different blowing rooms, single and tandem card, one and two drawing passages were used to process the silvers for open-end yarns. In addition BD 200 Rc and platt sacelowell open-end spinning machines were used. It was found that the waste of long staple Egyptian cotton, containing considerable amount of good fibres is suitable for open-end processing. Blended wastes of long fibres with lower …

Justification Of The Parameters Of The Working Body For Loosening The Furrows Between The Ridges, Xurshed Abdulkhayev

Scientific-technical journal

The article presents the results of theoretical studies on the justification of the angles of crumbling and solution of the wings of the pointed paw of the developed machine for pre-sowing treatment of ridges, the angle of its entry into the soil and the width of the grip. At the same time, based on the conditions for ensuring high-quality loosening of the soil with minimal energy consumption, the sliding of plant residues and weeds along the blades of the wings of the pointed paw and the descent from them, analytical dependences are obtained to determine the angles of crumbling and …

Mathematical Model Of Power Flow In A Single-Phase Network Using Facts Devices Containing Static Power Flow Compensator Svc, Sh V. Khamidov, Bahrom Normuratov

Scientific-technical journal

The use of FACTS technology makes it possible to reduce the gap between controlled and uncontrolled modes of EPS operation, providing dispatching personnel with additional degrees of freedom in controlling power flows and voltages in excess and deficient areas of the electrical network. The unified approach used as an alternative combines the state variables of the EPS without controlled power equipment and the state variables describing the given controlled power equipment - the FACTS device - into a single set of states. In this case, the electrical network is described in a single coordinate system for the combined iterative solutions …

Development Of A Model For Analysis Of Traffic Accidents Taking Into Account The Level Of Automobilization And Population In The Republic Of Uzbekistan, Jamshid Abdunazarov

Scientific-technical journal

This article is devoted to the development of a model for the analysis of traffic accidents in the Republic of Uzbekistan, taking into account the level of motorization and population. And also, statistical data of a road traffic accident throughout the country is processed to determine the forecast of a possible accident rate using the model of prof. R. Smid. In conclusion, a comparison of the methods for predicting the fatalities in road accidents is provided.

Scopeformer: N-Cnn-Vit Hybrid Model For Intracranial Hemorrhage Classification, Barhoumi Yassine, Ghulam Rasool

Henry M. Rowan College of Engineering Departmental Research

We propose a feature generator backbone composed of an ensemble of convolutional neural networks (CNNs) to improve the recently emerging Vision Transformer (ViT) models. We tackled the RSNA intracranial hemorrhage classification problem, i.e., identifying various hemorrhage types from computed tomography (CT) slices. We show that by gradually stacking several feature maps extracted using multiple Xception CNNs, we can develop a feature-rich input for the ViT model. Our approach allowed the ViT model to pay attention to relevant features at multiple levels. Moreover, pretraining the ”n” CNNs using various paradigms leads to a diverse feature set and further improves the performance …

Optimization Of Load-Bearing And Impact Energy Absorption Capacities Of Honeycomb Structures By Density Gradation, Oyindamola Khadijat Rahman

Theses and Dissertations

Density gradation has been analytically and experimentally proven to enhance the load-bearing and energy absorption efficiency of cellular solids. This research focuses on the analytical optimization (by virtual experiments) of polymeric honeycomb structures made from flexible thermoplastics to achieve density-graded structures with desired mechanical properties. The global stress-strain curves of single-density honeycomb structures are used as input to an analytical model that enables the characterization of the constitutive response of density-graded hexagonal honeycombs with discrete and continuous gradations and for various gradients. The stress-strain outputs are used to calculate the specific energy absorption, efficiency, and ideality metrics for all density-graded …

A Simple Gas-Kinetic Model For Dilute And Weakly Charged Plasma Micro-Jet Flows, Shiying Cai, Chunpei Cai

Michigan Tech Publications, Part 1

This paper presents a simple model for slightly charged gas expanding into a vacuum from a planar exit. The number density, bulk velocity, temperature, and potential at the exit are given. The electric field force is assumed weaker than the convection term and is neglected in the analysis. As such, the quasi-neutral condition is naturally adopted and the potential field is computed with the Boltzmann relation. At far field, the exit degenerates as a point source, and simplified analytical formulas for flow and electric fields are obtained. The results are generic and offer insights on many existing models in the …

Robotic Surgical Devices , Systems , And Related Methods, Shane Farritor, Erik Mumm, Philip Chu, Nishant Kumar, Jason Dumpert, Yutaka Tsutano

Department of Mechanical and Materials Engineering: Faculty Publications

The embodiments disclosed herein relate to various medical device components, including components that can be incorporated into robotic and / or in vivo medical devices. Certain embodiments include various modular medical devices for in vivo medical procedures.

Acute Effect Of High‑Definition And Conventional Tdcs On Exercise Performance And Psychophysiological Responses In Endurance Athletes: A Randomized Controlled Trial, Daniel Gomes Da Silva Machado, Marom Bikson, Abhishek Datta, Egas Caparelli‑Dáquer, Gozde Unal, Abrahão F. Baptista, Edilson Serpeloni Cyrino, Li Min Li, Edgard Morya, Alexandre Moreira, Alexandre Hideki Okano

Publications and Research

Transcranial direct current stimulation (tDCS) has been used aiming to boost exercise performance and inconsistent findings have been reported. One possible explanation is related to the limitations of the so-called “conventional” tDCS, which uses large rectangular electrodes, resulting in a diffuse electric field. A new tDCS technique called high-definition tDCS (HD-tDCS) has been recently developed. HD-tDCS uses small ring electrodes and produces improved focality and greater magnitude of its aftereffects. This study tested whether HD-tDCS would improve exercise performance to a greater extent than conventional tDCS. Twelve endurance athletes (29.4 ± 7.3 years; 60.15 ± 5.09 ml kg− 1 min− …

A Kinetic Model For Blood Biomarker Levels After Mild Traumatic Brain Injury, Sima Azizi, Daniel B. Hier, Blaine Allen, Tayo Obafemi-Ajayi, Gayla R. Olbricht, Matthew S. Thimgan, Donald C. Wunsch

Mathematics and Statistics Faculty Research & Creative Works

Traumatic brain injury (TBI) imposes a significant economic and social burden. The diagnosis and prognosis of mild TBI, also called concussion, is challenging. Concussions are common among contact sport athletes. After a blow to the head, it is often difficult to determine who has had a concussion, who should be withheld from play, if a concussed athlete is ready to return to the field, and which concussed athlete will develop a post-concussion syndrome. Biomarkers can be detected in the cerebrospinal fluid and blood after traumatic brain injury and their levels may have prognostic value. Despite significant investigation, questions remain as …

Efficient, Dual-Particle Directional Detection System Using A Rotating Scatter Mask, Robert Olesen, Bryan V. Egner, Darren E. Holland, Valerie Martin, James E. Bevins, Larry W. Burggraf, Buckley E. O'Day Iii

AFIT Patents

A directional radiation detection system and an omnidirectional radiation detector. The omnidirectional radiation detector detects radiation comprising at least one of: (i) gamma rays; and (ii) neutron particles. A radiation scatter mask (RSM) of the radiation detection system includes a rotating sleeve received over the omnidirectional radiation detector and rotating about a longitudinal axis. The RSM further includes: (i) a fin extending longitudinally from one side of the rotating sleeve; and (ii) a wall extending from the rotating sleeve and spaced apart from the fin having an upper end distally positioned on the rotating sleeve spaced apart or next to …

Fiber-Based Supercapacitor For Wearable Electronics, Rohit Lallansingh Yadav

USF Tampa Graduate Theses and Dissertations

Supercapacitors are significant devices that are used for energy storage and also have the capability of delivering energy at a faster rate than batteries. The increase in the significance of portable and wearable electronic equipment giving rise to pace in the development of flexible supercapacitor and flexible electrodes in recent years. A fiber-based supercapacitor (FSCs) is one of the most significant devices which have even helped us give pace knowing the properties of supercapacitor. These FSCs are said to have excellent electrochemical properties and flexibility. This did make function it in different forms of individual fibers or integrated textiles which …

Studying Complex Aquifer Systems From Large-Scale Stratigraphy Development To Local Aquifer Storage And Recovery, Hamid Vahdat Aboueshagh

LSU Doctoral Dissertations

Hydrostratigraphy model is an essential component of building valid groundwater models. Many challenges are associated with constructing hydrostratigraphy models which include geological complexities such as faults, domes, and angular unconformities. Developing a method with an emphasis on capturing big data to thoroughly inform large-scale models is one of the challenges addressed in the first part of this study. The method is predicated upon discretization of the study domain into tiles based on the geological dip direction and faults. The application of the method in the state of Louisiana with the utilization of more than 114000 well logs demonstrates promising results …

Airborne Counter-Uncrewed Systems With Runtime Assurance Control, Isaac J. Seslar

Mechanical Engineering ETDs

This thesis develops a response to the increase in the availability of the commercially available uncrewed aerial systems and is dedicated to the detection, classification, and tracking required to successfully neutralize when determined malicious. A requirement of actively avoiding obstacles using runtime assurance is addressed and designed to keep the hardware safe in potentially dangerous situations. This work will elaborate on the several components the test bed is comprised of, specifically the hardware and software portions that successfully solve the problem. The software encompasses the simulation, the multiple algorithms required for the tracking, and the machine learning required for detection …

Experimental And Numerical Analysis Of The Hydraulic Jump Stilling Basin And The Downstream Scour Depth, L. J. Miranda, R. Sánchez

International Junior Researcher and Engineer Workshop on Hydraulic Structures

This paper presents a study of a tridimensional low-head hydraulic jump stilling basin by using both physical and numerical models. Laboratory tests up to 15 hours in duration were carried out in a 1.9 m wide and 14 m long flume. Four gates produced a jet with a submerged hydraulic jump in a positive-step stilling basin, after which scour developed in a nearly uniform sand bed. Acoustic Doppler Velocimeter, piezometers and image processing were used to collect the hydrodynamic data, and Reynolds Averaged Navier-Stokes simulations developed in OpenFOAM were tested for validation purposes. Then, the study focused on (1) the …

Three-Dimensional Characterization Of Laboratory Scour Holes Around Bridge Piers, Ana Margarida Bento, Teresa Viseu, João Pedro Pêgo, Lúcia Couto

International Junior Researcher and Engineer Workshop on Hydraulic Structures

The presence of a bridge foundation leads to the formation of a scour hole, from which entrainment and transport of sediments are controlled by the turbulent structures therein developed. Hence, once formed, these scour holes interfere significantly with the scouring process in several ways, for instance, by modifying the incoming flow patterns. Therefore, a three-dimensional survey of the scour hole and the characterization of the deposition features is essential for prevention and safety control purposes. To investigate this, scouring experiments around two oblong bridge piers were performed in a tilting flume of the Portuguese National Laboratory of Civil Engineering (LNEC), …

Scour Downstream Of Log-Frame Structures In The Presence Of Rigid Vegetation, Deep Roy, Simone Pagliara

International Junior Researcher and Engineer Workshop on Hydraulic Structures

Recently, various low-head environment friendly structures have been used to control the sediment transport and preserve river navigability. Among these structures, double winged log-frames are effective for concentrating the flow by decreasing channel width. Moreover, they create scour holes which can be used by fishes as resting spots. Usually, log-frames are placed in mountainous curved channels where there is natural growth of various types of in-stream vegetation in the downstream stilling basin of the structure which influences scour geometry and depth. Therefore, the current study aims to analyze the impact of rigid woody vegetation, placed downstream of double winged log-frames, …

Estimation Of The Efficiency Of Hydraulic Pumps, A. Martin-Candilejo, D. Santillán, L. Garrote

International Junior Researcher and Engineer Workshop on Hydraulic Structures

A sustainable design of water supply systems needs to account operational costs. When pumping is required, the energy consumed by the pumps plays a major part in the operational costs, and the efficiency of the pumps can greatly affect the energy expenses. How to properly estimate the value of pump efficiency is hence of great importance. The aim of this study is to study in depth the efficiency of hydraulic pumps, in relation with the other design variables (flow rate, pumping head, power, etc.). For that, 400 hydraulic pumps were analysed. A strong relationship between the flow rate and the …

Streamflow Duration Curves: Focus On Low Flows, E. Carcano, M. Betasolo

International Junior Researcher and Engineer Workshop on Hydraulic Structures

Flow duration curves (FDCs) express the link between a selected streamflow and the percentage in time such value is exceeded. The curves provide a graphical insight into hydrological regimes, though, the absence of time-series data is a significant shortcoming. Conversely to what happens with hygrograms, flows in FDCs are represented without regard of sequence of occurrence. This paper explores FDCs of 19 catchments for which, at least, 10 years of daily discharges are available. FDCs can be built for any temporal scale (i.e. daily, weekly, monthly). In this study daily discharges have been adopted because daily scale better represents the …