Engineering Commons^™

Cybersecurity Maturity Model Certification (Cmmc) Compliance For Dod Contractors, Sierra Burnett

Cybersecurity Undergraduate Research Showcase

The DoD is currently taking a supply-chain risk management strategy to foster cybersecurity. This unique strategy is often referred to as CMMC which stands for “Cybersecurity Maturity Model Certification”. The approach requires that all the 300,000 DoD contractors acquire third-party authentication that may attain the requirements for the CMMC maturity level suitable to the work they desire to do for the DoD. CMMC typically examines the organization's capability to safeguard Federal Contract Information as well as CUI. It integrates various cybersecurity standards already in place and plots the best practices alongside processes to five maturity levels that range from the …

Risk Management And Biases In How Drivers Respond To Nuisance Flooding, Saige Hill, Juita-Elena (Wie) Yusuf, Burton St. John Iii, Pragati Rawat, Carol Considine

School of Public Service Faculty Publications

Nuisance flooding, or recurrent flooding, occurs during high tide and may be exacerbated when combined with other events such as heavy precipitation, strong winds, or storm surge. Sea level rise has contributed to increased frequency and duration of nuisance flooding in low-lying coastal areas and is causing community-specific impacts such as transportation disruption, road closures, compromises to life and property, overwhelmed storm water systems, and infrastructure damage. This chapter focuses on how drivers respond during nuisance flooding events. Specifically, we discuss how drivers in the Hampton Roads region of southeastern coastal Virginia obtain information about road flooding, how they respond, …

Strengthening Of Concrete Deep Beams Using Carbon Fabric Reinforced Cementitious/Geopolymeric Matrix, Nour Mohamed Muhsen Khir Allah

Theses

This research aimed to examine the effectiveness of using carbon fabric-reinforced matrix (C-FRM) composites to improve the shear response of reinforced concrete (RC) deep beams. Ten RC deep beams with a/h of 1.6 were tested, where a is the shear span and his is the beam depth. Test parameters included the presence of internal shear reinforcement (no shear reinforcement and minimum shear reinforcement), number of C-FRM composite layers (one and two layers), angle of inclination of the second layer of CFRM (90o and 0o with respect to the longitudinal direction of the beam), and type of matrix (cementitious and geopolymer). …

Flutter Suppression By Active Controller Of A Two-Dimensional Wing With A Flap, Abdallah Muhammed Tarabulsi

Theses

Flutter is a divergent oscillation of an aeroelastic structure, and one of a family of aeroelastic instability phenomena, that results from the interaction of elastic and inertial forces of the structure with the surrounding aerodynamic forces. Airfoil Flutter is important due to its catastrophic effect on the durability and operational safety of the structure. Traditionally, flutter is prevented within an aircraft's flight envelope using passive approaches such as optimizing stiffness distribution, mass balancing, or modifying geometry during the design phase. Although these methods are effective but they led to heavier airfoil designs. On the other hand, active control methods allow …

Material Characterization For Microwave Absorbing And Shielding Applications, Muhammed Shafeeque Kallumottakkal

Theses

The rapid advancement and widespread of microwave and RF-communication systems have contributed to an abundant rise in electromagnetic energy radiation in our living environment. Such an increase in microwave sources is due to the development and advancement in communication techniques (mobile phones, laptops, and antennas for aeronautics or automobile) and electronic warfare in the military field (radar and satellite). To address these concerns, EM absorbing materials are used to ensure public safety and the safety of military operations. Various types of EM absorbing materials made up of composite materials have been produced and studied. This thesis discusses the microwave properties …

Biosensor Devices Based On Graphene And 2d Materials, Suhada Aidrous Poovathy

Theses

Nanomaterials offered new improvements and developments to the bio-sensing field due to their unique physical and chemical properties. Unique and exceptional electronic properties, such as the ultrahigh surface-to-volume ratio and the excellent electrical properties of the 2D materials like in graphene, making these materials promising for future smaller and faster electronics, but an extensive amount of research is still needed. This thesis is concerned with the study of the integration of 2D material graphene in the development of sensitive and rapid biosensors. The main objective of this thesis is to understand the features and characteristics of graphene, evaluate the scope …

Numerical Study Of Graphene/Au/Sic Waveguide-Based Surface Plasmon Resonance Sensor, Wei Du, Lucas Miller, Feng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

A new waveguide-based surface plasmon resonance (SPR) sensor was proposed and investigated by numerical simulation. The sensor consists of a graphene cover layer, a gold (Au) thin film, and a silicon carbide (SiC) waveguide layer on a silicon dioxide/silicon (SiO₂ /Si) substrate. The large bandgap energy of SiC allows the sensor to operate in the visible and near-infrared wavelength ranges, which effectively reduces the light absorption in water to improve the sensitivity. The sensor was characterized by comparing the shift of the resonance wavelength peak with change of the refractive index (RI), which mimics the change of analyte concentration …

Extracellular Matrix-Mimetic Hydrogels For Treating Neural Tissue Injury: A Focus On Fibrin, Hyaluronic Acid, And Elastin-Like Polypeptide Hydrogels, Derek W. Nelson, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Neurological and functional recovery is limited following central nervous system injury and severe injury to the peripheral nervous system. Extracellular matrix (ECM)-mimetic hydrogels are of particular interest as regenerative scaffolds for the injured nervous system as they provide 3D bioactive interfaces that modulate cellular response to the injury environment and provide naturally degradable scaffolding for effective tissue remodeling. In this review, three unique ECM-mimetic hydrogels used in models of neural injury are reviewed: fibrin hydrogels, which rely on a naturally occurring enzymatic gelation, hyaluronic acid hydrogels, which require chemical modification prior to chemical crosslinking, and elastin-like polypeptide (ELP) hydrogels, which …

Experimental Investigation Of Additive Manufacturing Of Continuous Carbon Fiber Composites With Multifunctional Electro-Tensile Properties, Ritesh Ghimire, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Manufacturing processes for monofunctional and multifunctional materials vary depending on the design optimization. Multifunctional continuous carbon fiber composites provide great potential in achieving coupled structural and electrical properties for their applications in aircraft, unmanned aircraft systems, and spacecraft. Proper optimization of tensile and electrical properties offers benefits early in the design and continuous operational safety phases to obtain coupled multifunctional properties. In this paper, fused filament fabrication additive manufacturing (AM) technique was used to fabricate continuous carbon fiber solid laminated composites test coupons. The proposed new method characterizes the electrical conductivity's coupled effects on the tensile properties, including the failure …

Dc Bus Voltage Selection For A Grid-Connected Low-Voltage Dc Residential Nanogrid Using Real Data With Modified Load Profiles, Saeed Habibi, Ramin Rahimi, Mehdi Ferdowsi, Pourya Shamsi

Electrical and Computer Engineering Faculty Research & Creative Works

This study examines various low voltage levels applied to a direct current residential nanogrid (DC-RNG) with respect to the efficiency and component cost of the system. Due to the significant increase in DC-compatible loads, on-site Photovoltaic (PV) generation, and local battery storage, DC distribution has gained considerable attention in buildings. To provide an accurate evaluation of the DC-RNG's efficiency and component cost, a one-year load profile of a conventional AC-powered house is considered, and AC appliances' load profiles are scaled to their equivalent available DC appliances. Based on the modified load profiles, proper wiring schemes, converters, and protection devices are …

Durability Of Concrete Produced With Alternative Supplementary Cementitious Material, Craig Newtson, Brad Weldon, Judit Garcia, Seyedsaleh Mousavinezhad, William Toledo

Data

Historically, Class F fly ash has been chosen as a supplementary cementitious material (SCM) in concrete for its ability to mitigate alkali-silica reaction (ASR). However, future availability of fly ash is uncertain because the energy industry has been investing in renewable energy production and removing coal burning generating stations from operation. Consequently, there is a growing need to find new, cost effective and environmentally friendly alternatives to fly ash. This study investigated a locally available natural pozzolan mined from a pumicite deposit near Espanola, NM for its ability to mediate ASR. Concrete and mortar mixtures included SCM contents ranging from …

Standardized 1x6u Cubesat Structure Design, Maximilian H. Brummel

Masters Theses

A CubeSat is a small satellite composed of one or more 10cm x 10cm x ~10cm cubes. Sometimes referred to as a “U” as in unit, the cubes can be combined in configurations of 2U, 3U, 6U, and more. CubeSats provide many advantages that larger satellites cannot offer. They are relatively inexpensive and can be fabricated much faster. Small-scale projects that require a fast timeline from conception up to completion are perfect for CubeSats. Furthermore, educational programs use CubeSat projects to teach and prepare students for the satellite industry. Popular configurations for CubeSat are 1U, 3U and 6U where the …

Assessment Of Deteriorated Structural Concrete To Provide Durable Repairs, Theodore Hopwood, Christopher Goff, Sudhir Palle

Kentucky Transportation Center Research Report

Most of the structural elements on Kentucky bridges are made of reinforced concrete. Many of these elements deteriorate as a result of corrosion of the reinforcing steel caused by carbonation and — primarily — applications of chlorides by the Kentucky Transportation Cabinet (KYTC). Corrosion of reinforcing steel is reviewed along with assessment procedures that leverage nondestructive evaluation (NDE) methods and related laboratory and field tests. Several maintenance procedures are discussed, including the application of sealers and coatings, patch and major concrete repairs, and electrochemical methods. Incorporating NDE and test results into maintenance procedure selection is discussed. Recommendations are provided on …

Computational Simulation Of The Lung Doses Of Air-Borne Fine And Ultrafine Particles Inhaled By Humans At Industrial Workplaces, Mohammed Ali

Technology Faculty Publications and Presentations

This study correlates computational predictions with in-vivo experimental results of inhaled fine and ultrafine particulate matters (PMs) transport, dissemination, and deposition in the human respiratory airways. Epidemiological studies suggest that workplace exposure of anthropogenic pollutant PMs as a risk factor for increased susceptibility to acute broncho-pulmonary infections. However, investigations on detailed human inhalation and PM transport processes are restrictive from time, cost, and ethical perspectives. To overcome this problem, computational simulation of particle deposition based on the Multiple Path Particle Dosimetry (MPPD) model was employed. Here, the physical, mechanical, and electrical properties of PMs of carbon black and nanoparticles from …

Path Towards Energy Sustainability: Amultidimensional Analysis Of Energypoverty In Philippine Households, Anna Katrina R. Ignacio, Maria Sofia Lei P. Puncia, Arlene B. Inocencio, Marites Tiongco, Mitzie Irene P. Conchada, Alellie B. Sobreviñas, Rens Adrian T. Calub

Angelo King Institute for Economic and Business Studies (AKI)

Measuring energy poverty to meet one’s basic needs is vital for household assessments concerning accessibility of energy, affordability of energy prices, usage of energy resources, and sufficiency of energy consumption. In this Policy Brief, we have listed recommendations and rationale to improve the energy conditions of Philippine households.

A Case Study On Gender Inequality In A Defense Setting, Nicole L. Hicks

Doctoral Dissertations and Projects

Women are gaining education, skills, strength, and have adequate drive yet, gender inequality is still blocking their advancement into senior leadership especially in the United States (U.S.) Defense Industry. The purpose of this study was to explore gender inequality within organizational leadership, specifically within the Department of Defense (DoD) civilian sector, to identify potential barriers to ceasing the advancement of qualified women. The main research question driving this research is, what internal and external barriers exist in the defense department regarding the professional advancement of women and what factors contribute to advancement into leadership. Follow-up questions include how veteran status, …

Decarbonizing Rural Residential Buildings In Cold Climates: A Techno-Economic Analysis Of Heating Electrification, Filippo Padovani, Nelson Sommerfeldt, Francesca Longobardi, Joshua M. Pearce

Michigan Tech Publications, Part 1

Given the need for decarbonization of the heating sector and the acute need of a propane replacement in the U.S. Upper Midwest, this study quantifies the techno-economic characteristics of sustainable heating electrification in isolated rural, residential buildings in cold climates without natural gas supply. Archetypal buildings are modeled under four levels of electrification. At each electrification level, a parametric solar photovoltaic (PV) sizing analysis is performed and the total life cycle cost, renewable fraction and greenhouse gas (GHG) emissions are calculated based on the primary energy supply for each building type. Cost optimal solutions are stress-tested with multi-dimensional sensitivity analyses. …

Simple Procedure For Calculating Parameters Of Permanent Magnet Linear Generator And Methods For Maximizing Power Absorption Using Less Dependent Mathematical Model / Low Computationally Cost Controllers In Wave Energy Converters, Bisni Fahad Mon

Dissertations

The study comprises of designing permanent magnet linear generator (PMLG) for wave energy converters (WECs) and method for maximizing power absorption using less dependent mathematical model or low computationally cost controllers. There are three proposed controller methods: the damping control using maximum power point tracking (MPPT), the reactive control using MPPT, and finite control set model predictive control (FCSMPC).

The first part of the thesis is started with the design and testing of a laboratory scale test-rig for wave energy converters (WECs). The main element of the test-rig is a double-sided permanent magnet linear generator (PMLG). In this study, detailed …

Pv Hosting Capacity Assessment For Improved Planning Of Low-Voltage Distribution Networks, Sina Ibne Ahmed, Hossein Salehfar, Daisy Flora Selvaraj

EERC Publications, Papers, & Presentations

This study has developed a rural substation feeder model and conducted an iterative photovoltaics (PV) hosting capacity analysis for various load conditions. Multiple hosting capacity constraints have been considered, and their impacts have been evaluated. In addition, PV capacity improvement techniques are discussed. The study’s outcome demonstrates the application of dynamic inverter control settings to mitigate capacity restrictions.

Construction Of Spatial Filtering Matrices For Norm-Optimal Ilc In Single Point Incremental Forming, Joseph D. Fischer, Mitchell R. Woodside, Douglas A. Bristow, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Iterative Learning Control (ILC) is a control technique used to improve performance in repetitive processes. ILC has grown in popularity in part due to its ease of implementation and ability to achieve high levels of accuracy even in complex nonlinear systems. However, a fundamental limitation of ILC is that it relies on system repetition, making the impact of non-repetitive disturbances (e.g., noise) on the controller's performance severe. Much work has been done to reject noise in the time domain; however, little has been done to address noise which is spatial in nature. In this work, a method for limiting noise …

Toughening Mechanisms For The Attachment Of Architectured Materials: The Mechanics Of The Tendon Enthesis, Mikhail Golman, Adam C. Abraham, Iden Kurtaliaj, Brittany P. Marshall, Yizhong Jenny Hu, Andrea G. Schwartz, X. Edward Guo, Victor Birman, Philipp J. Thurner, Guy M. Genin, Stavros Thomopoulos

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Architectured materials offer tailored mechanical properties but are limited in engineering applications due to challenges in maintaining toughness across their attachments. The enthesis connects tendon and bone, two vastly different architectured materials, and exhibits toughness across a wide range of loadings. Understanding the mechanisms by which this is achieved could inform the development of engineered attachments. Integrating experiments, simulations, and previously unexplored imaging that enabled simultaneous observation of mineralized and unmineralized tissues, we identified putative mechanisms of enthesis toughening in a mouse model and then manipulated these mechanisms via in vivo control of mineralization and architecture. Imaging uncovered a fibrous …

The Race To Fifty Feet: An Effort To Determine The Benefits Of Deepening The Mississippi River, Brian Miles

LSU New Orleans Theses and Dissertations

This research examined the benefits and drawbacks of deepening the Lower Mississippi River to fifty feet. It established that the deepening of the Lower Mississippi River will impact not only the local area but also the inland regions that rely on the river systems and lower river ports for product movement. The perspectives of vessel operators, maritime industry experts and charterers are provided to offer insight. The sources for the research include educational literature, maritime research and interviews of industry experts. Based on this research, it is clear that this project will benefit many parties. The beneficiaries will include both …

Concolic Execution Of Nmap Scripts For Honeyfarm Generation, Zhe Li, Bo Chen, Wu-Chang Feng, Fei Xie

Computer Science Faculty Publications and Presentations

Attackers rely upon a vast array of tools for automating attacksagainst vulnerable servers and services. It is often the case thatwhen vulnerabilities are disclosed, scripts for detecting and exploit-ing them in tools such asNmapandMetasploitare released soonafter, leading to the immediate identification and compromise ofvulnerable systems. Honeypots, honeynets, tarpits, and other decep-tive techniques can be used to slow attackers down, however, such approaches have difficulty keeping up with the sheer number of vulnerabilities being discovered and attacking scripts that are being released. To address this issue, this paper describes an approach for applying concolic execution on attacking scripts in Nmap in …

Collaborative Multi-Resource Allocation In Terrestrial-Satellite Network Towards 6g, Shu Fu, Jie Gao, Lian Zhao

Civil and Environmental Engineering Faculty Research and Publications

Terrestrial-satellite networks (TSNs) are envisioned to play a significant role in the sixth-generation (6G) wireless networks. In such networks, hot air balloons are useful as they can relay the signals between satellites and ground stations. Most existing works assume that the hot air balloons are deployed at the same height with the same minimum elevation angle to the satellites, which may not be practical due to possible route conflict with airplanes and other flight equipment. In this paper, we consider a TSN containing hot air balloons at different heights and with different minimum elevation angles, which creates the challenge of …

Enhanced Energy And Resource Recovery Via Synergistic Catalytic Pyrolysis Of Byproducts From Thermal Processing Of Wastewater Solids, Zhongzhe Liu, Matthew Hughes, Yiran Tong, Jizhi Zhoud, William Kreutter, Danny Valtierra, Simcha L. Singer, Daniel Zitomer, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

Wastewater sludge drying and incineration are conventional solids handling processes that are sometimes employed in water resource reclamation facilities. However, these two processes generate byproducts, sludge drying chaff and sludge incinerator ash, which are landfilled without taking advantage of their value. To gain value from these byproducts, a new synergistic catalytic pyrolysis process using chaff and ash was investigated in this study to improve energy production (i.e. generating a high yield pyrolysis gas) and generate useful products. Ash was used as a catalyst to decrease bio-oil that is corrosive and challenging for combustion in standard equipment, while increasing pyrolysis gas …

Design Mythbusters, Christopher Van Dyke, Steve Waddle, Doug Kreis

Kentucky Transportation Center Research Report

When highway project designs depart from design values found in the Kentucky Transportation Cabinet (KYTC) Highway Design Manual and AASHTO’s A Policy on Geometric Design of Highways and Streets, project managers at the agency must obtain either a design exception or design variance. While designers are more comfortable with exceptions and variances than they were 10 or 20 years ago, some hesitancy remains, especially among the Cabinet’s consultants. Misperceptions about what exceptions or variances entail or about their performance may underlie this reluctance. Exceptions and variances are best conceptualized as formal justifications for design decisions. Project managers merely need …

A Conceptual Efficient Design Of Energy Recovery Systems Using A New Energy-Area Key Parameter, Ibrahim H. Alhajri, Mamdouh A. Gadalla, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

Energy integration in petrochemical and refining industries is an effective concept to minimize dependence on heating and cooling utilities through networks of exchanger equipment. Pinch Analysis is very popular and successful technique to optimize heat recovery between heat sources and sinks. Yet, design of networks of exchangers is challenging and requires careful attention to energy consumption and exchanger areas. This work presents a graphical methodology to design exchanger networks taking into account both heat loads and transfer areas of exchanger units in one single information. A new parameter is introduced for design that is the ratio between the heat load …

Investigation Of The Prevalence Of Faults In The Heating, Ventilation, And Air-Conditioning Systems Of Commercial Buildings, Amir Ebrahimifakhar

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

This dissertation describes a large-scale investigation of heating, ventilation, and air-conditioning (HVAC) fault prevalence in commercial buildings in the United States. A multi-year dataset with 36,556 pieces of HVAC equipment including air handling units (AHUs), air terminal units (ATUs), and packaged rooftop units (RTUs) was analyzed to determine values for several HVAC fault prevalence metrics. The primary source of data for this study comes from three commercial fault detection and diagnostics (FDD) providers. Since each FDD provider uses different terms to refer to the same fault in an HVAC system, a mapping function was created for each FDD provider’s dataset, …

Analyzing Internships In Construction Management Based On Student/Industry Interest And Experience, Jared C. Gormley

Construction Management

The goal of this research paper is to analyze feedback from both student interns, and the industry on whether there is a disconnect between what each group feels makes an internship beneficial or not. Research was done evaluating current Construction Management students with internship experience at Cal Poly, while also evaluating companies that have internship programs. This paper will provide student interns with insight from industry members regarding internship programs, and it will provide companies with insight from students regarding their experiences within internship programs. Two surveys were sent out, one to all Construction Management Students at Cal Poly, and …

Erratum: “Numerical Investigation Of Diesel Particulate Matter Dispersion In An Underground Development Face During Key Mining Activities”. [Adv. Powder Technol. 31 (2020) 3882–3896] (Advanced Powder Technology (2020) 31(9) (3882–3896), (S0921883120303691), (10.1016/J.Apt.2020.07.031)), Ping Chang, Guang Xu, Benjamin Mullins, S. Abishek, Mostafa Sharifzadeh

Mining Engineering Faculty Research & Creative Works

The authors regret (M495), and the Department of Mines, Industry Regulation and Safety, with in-kind support from Barminco, the SF6 measured data points provided by Chem Centre, and the computation resources provided by the Pawsey Supercomputing Centre with funding from the Australian Government and the Government of Western Australia.> The authors would like to apologize for any inconvenience caused.