Engineering Commons^™

Face Sheet/Core Debonding In Sandwich Composites Under Static And Fatigue Loading, Manjinder Singh Warriach

Wayne State University Dissertations

Delamination growth due to face sheet/core debonding is a major concern due to its inherent weakness in sandwich composites which can be exacerbated due to the presence of flaws. In this research work The primary objective of this research was to characterize the delamination crack growth behavior in E-glass face sheet/polyurethane foam core sandwich composite with pre-existing initial delamination crack at a face sheet/core interface under static and fatigue for mode I and mixed mode loading. For mode I static loading two types of delamination experiments, namely T-peel test and wedge test were implemented to evaluate fracture toughness in polyurethane …

Edge Fracture Prediction Of Dual Phase Steels With Consideration Of Microstructures, Ming Wen

Wayne State University Dissertations

In recent years, Advanced High Strength Steels (AHSS) have been used for the lightweight structural design and manufacturing in automotive industry. This class of sheet metals are prone to edge fracture during stamping production, and the fracture often occurs at much lower strain than that predicted based on the forming limit curves. The uncertainty in predicting edge fracture represents a great challenge in the application of AHSS. This dissertation is focused on the better understanding of edge fracture phenomenon through experimental observation and computer modeling with the consideration of microstructure effect.

In this dissertation, Hole Expansion (HE) test was used …

Specialized Inter-Particle Interaction Lbm For Patterned Superhydrophobic Surfaces, Amal Saeed Yagub

Wayne State University Dissertations

SPECIALIZED INTER-PARTICLE INTERACTION LBM FOR PATTERNED SUPERHYDROPHOBIC SURFACES

by

AMAL S. YAGUB

ABSTRACT:

Superhydrophobic surface characteristics are important in many industrial applications, ranging from the textile to the military. It was observed that surfaces fabricated with nano/micro roughness can manipulate the droplet contact angle, thus providing an opportunity to control the droplet wetting characteristics. The Shan and Chen (SC) lattice Boltzmann model (LBM) is a good numerical tool, which holds strong potentials to qualify for simulating droplets wettability. This is due to its realistic nature of droplet contact angle (CA) prediction on flat smooth surfaces. But SC-LBM was not able …

An On-Orbit Calibration Procedure For Spaceborne Microwave Radiometers Using Special Spacecraft Attitude Maneuvers, Spencer Farrar

Electronic Theses and Dissertations

This dissertation revisits, develops, and documents methods that can be used to calibrate spaceborne microwave radiometers once in orbit. The on-orbit calibration methods discussed within this dissertation can provide accurate and early results by utilizing Calibration Attitude Maneuvers (CAM), which encompasses Deep Space Calibration (DSC) and a new use of the Second Stokes (SS) analysis that can provide early and much needed insight on the performance of the instrument. This dissertation describes pre-existing and new methods of using DSC maneuvers as well as a simplified use of the SS procedure. Over TRMM's 17 years of operation it has provided invaluable …

A Gpu Powered Mobile Ar Navigation System, Mengshen Zhao

Electronic Theses and Dissertations

This thesis presents a real-time Augmented Reality Navigation System(ARNavi) on Android smartphone that leverages the parallel computing power of mobile GPUs. Unlike conventional navigation systems, our proposed ARNavi augments navigation information onto real scene video streaming from device camera in real-time. To achieve this goal, we implement and accelerate compute intensive part of applications using OpenCL on GPU integrated on mobile Application Processor (AP). The contributions of this thesis are three-fold. First, we propose new lane detection algorithm and prediction mechanism based on geometric coordinates. The result shows that these two algorithms are fast and accurate. Second, we port and …

Modeling Roughness Of Rock Discontinuity Surfaces, Christopher Pickering

Electronic Theses and Dissertations

The aim of this thesis is to propose a new methodology of quantifying the rock discontinuity condition of roughness through the physically based modeling approach of signal analysis. The development of this method came about after investigation into the use of qualitative categorizations of roughness from the RMR rating system within rock engineering system matrices. In an attempt to assign significant values to these generalized qualitative descriptions, the standard joint roughness coefficient (JRC) profiles were initially examined through basic measurements, such as aperture and ramp angle. Following these initial measurements and identification of inconsistencies in the wave parameters of the …

Design Disjunction For Resilient Reconfigurable Hardware, Ahmad Alzahrani

Electronic Theses and Dissertations

Contemporary reconfigurable hardware devices have the capability to achieve high performance, power efficiency, and adaptability required to meet a wide range of design goals. With scaling challenges facing current complementary metal oxide semiconductor (CMOS), new concepts and methodologies supporting efficient adaptation to handle reliability issues are becoming increasingly prominent. Reconfigurable hardware and their ability to realize self-organization features are expected to play a key role in designing future dependable hardware architectures. However, the exponential increase in density and complexity of current commercial SRAM-based field-programmable gate arrays (FPGAs) has escalated the overhead associated with dynamic runtime design adaptation. Traditionally, static modular …

Liquid Crystal-Based Biosensors For The Detection Of Bile Acids, Sihui He

Electronic Theses and Dissertations

Bile acids are physiologically important metabolites, which are synthesized in liver as the end products of cholesterol metabolism and then secreted into intestine. They are amphiphilic molecules which play a critical role in the digestion and absorption of fats and fat-soluble vitamins through emulsification. The concentration of bile acids is an indicator for liver function. Individual suffering from liver diseases has a sharp increase in bile acid concentrations. Hence, the concentration level of bile acids has long been used as a biomarker for the early diagnosis of intestinal and liver diseases. Conventional methods of bile acid detection such as chromatography-mass …

Nonlinear Optical Response Of Simple Molecules And Two-Photon Semiconductor Lasers, Matthew Reichert

Electronic Theses and Dissertations

This dissertation investigates two long standing issues in nonlinear optics: complete characterization of the ultrafast dynamics of simple molecules, and the potential of a two-photon laser using a bulk semiconductor gain medium. Within the Born-Oppenheimer approximation, nonlinear refraction in molecular liquids and gases can arise from both bound-electronic and nuclear origins. Knowledge of the magnitudes, temporal dynamics, polarization and spectral dependences of each of these mechanisms is important for many applications including filamentation, white-light continuum generation, all-optical switching, and nonlinear spectroscopy. In this work the nonlinear dynamics of molecules are investigated in both liquid and gas phase with the recently …

Optical Fibers For Space-Division Multiplexed Transmission And Networking, Cen Xia

Electronic Theses and Dissertations

Single-mode fiber transmission can no longer satisfy exponentially growing capacity demand. Space-division multiplexing (SDM) appears to be the only way able to dramatically improve the transmission capacity, for which, novel optical fiber is one of the key technologies. Such fibers must possess the following characteristics: 1) high mode density per cross-sectional area and 2) low crosstalk or low modal differential group delay (DMGD) to reduce complexity of digital signal processing. In this dissertation, we explore the design and characterization of three kinds of fibers for SDM: few-mode fiber (FMF), few-mode multi-core fiber (FM-MCF) and coupled multi-core fiber (CMCF) as well …

Implementation Of A Raptorq-Based Protocol For Peer To Peer Network, Yuzhu Bai

Electronic Theses and Dissertations

The object of this thesis is to develop and test a Ruby based implementation of the RaptorQP2P protocol. The RaptorQP2P protocol is a novel peer-to-peer protocol based on RaptorQ forward error correction. This protocol facilitates delivery of a single file to a large number of peers. It applies two levels of RaptorQ encoding to the source file before packet transmission. Download completion time using RaptorQP2P was found to be significantly improved comparing to BitTorrent. We developed a Ruby interface to the Qualcomm proprietary RaptorQ software development kit library. Then we achieved the two levels of RaptorQ encoding and decoding with …

Mcmc- Based Optimization And Application, Xiaobin Wu

Electronic Theses and Dissertations

In the thesis, we study the theory of Markov Chain Monte Carlo (MCMC) and its application in statistical optimization. The MCMC method is a class of evolutionary algorithms for generating samples from given probability distributions. In the thesis, we first focus on the methods of slice sampling and simulated annealing. While slice sampling has a merit to generate samples based on the underlying distribution with adjustable step size, simulated annealing can facilitate samples to jump out of local optima and converge quickly to the global optimum. With this MCMC method, we then solve two practical optimization problems. The first problem …

Electrical And Computer Engineering/ Undergraduates/ Carlson & Sappnelson/ Purdue University/ 2012, Jake Carlson, Megan R. Sapp Nelson

Data Information Literacy Case Study Directory

This is a case study of a semester long data information literacy program employing an embedded librarian approach to teach students competencies in describing, organizing and documenting their work in developing software code. Materials include a book chapter describing the case study, a rubric for evaluating software code and its accompanying documentation, a handout to introduce the program to teaching assistants, a lesson plan for a skills session on documenting software code, and a list of possible activities to encourage good practice in describing and documenting code.

Sheep Updates 2015 - Ravensthorpe, Bruce Mullan, Kate Pritchett, Kimbal Curtis, Chris Wilcox, Mike Hyder, Leigh Sonnerman, Lynne Bradshaw, Geoff Lindon, Katherine Davies, Joe Young, Stephen Lee, Ian Robertson, Lucy Anderton, Hayley Norman, Ed Barrett-Lenard, Jackie Jarvis, Ben Patrick

Sheep Updates

This session covers fourteen papers from different authors:

1. The Sheep Industry Business Innovation project, Bruce Mullan, Sheep Industry Development Director, Department of Agriculture and Food, Western Australia

2. Western Australian sheep stocktake, Kate Pritchett and Kimbal Curtis, Research Officers, Department of Agriculture and Food, Western Australia

3. Wool demand and supply - short term volatility, long term opportunities, Chris Wilcox, Principal of Poimena Analysis

4. Lifetime management for maternal ewes, Mike Hyder, Research Officer, Department of Agriculture and Food, Western Australia

5. National Livestock Identification System (NLIS) for sheep and goats - what is the NLIS database? Leigh Sonnermann, …

Qcm Study Of Silicon Oxide And Iron Oxide Ald Growth Rate, Justin C. Ikerman, Zheng Lu, Sijia Li

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Trapping Light With Nanostructures For Sensors, Kareem Garriga

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Environmentally Friendly Propylene Epoxidation Process Using Silver Catalysts, Sijia Li, Zheng Lu, Justin Ikerman

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Ink-Jet Printing: A Method For Affordable Additive Manufacturing Of Dye-Sensitized Solar Cells, Ryan Longchamps

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Electric Field Modification Of A Diffusion Flame With Variable Electrode Geometry, Zachary Pinz

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Industry Career Guide: Mining, Roberto Raymundo

Angelo King Institute for Economic and Business Studies (AKI)

The mining industry in the Philippines plays a very significant role in the pursuit of industrial development because of the sector’s ability to provide mineral resources that serve as raw materials for manufacturing, construction, the utilities as well as the transportation and communications sector. It is also a major contributor of foreign currency through the exports of mineral ore and other processed mineral products and provides employment to communities in far flung areas where the only source of economic activity is mining operations. The extraction of copper, gold, silver, nickel, coal, gas, oil, stone and gravel as well as finding …

Intelligent Supervisory Switching Control Of An Unmanned Surface Vehicle, Ivan Rodrigues Bertaska

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

The project originally proposed for this fellowship focused on developing a framework for multimodal control of an unmanned surface vehicle (USV) – transitioning it from an underactuated system to an overactuated one. This would assist in two main functions USVs are typically tasked with: transiting and station-keeping. This project has since expanded to encompass novel territory in control theory, robotics, and computer science. The author is hopeful that the work reported here will assist in the transition of USVs from an academic pursuit into a valuable, pervasive tool for the oceanic sciences and the ocean industry. For the continued expansion …

A Novel In Situ Microscope For Studying Benthic Organisms, Andrew Mullen

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

Coastal marine ecosystems such as coral reefs, kelp forests, sea grass beds and mangroves have significant societal value. As economic resources they support tourism, fisheries and storm protection while ecologically they host high biological diversity and productivity. Many basic biological, chemical, and physical processes taking place in these marine ecosystems occur at ‘micro-­‐scales’ less than a millimeter in size. Examples of significant micro-­‐scale activities include: coral bleaching of their single-­‐ celled symbiotic algae, larval settlement and attachment, competition between sessile organisms along thin interfaces, and fluxes of particles to and from the seafloor. It is also important to consider that …

Novel Endohedral Derivatives Of Sc3n@C2n (N = 34, 40) And Unique Tether Controlled Bis-Functionalization Of Fullerenes, Maira Raquel Ceron Hernandez

Open Access Theses & Dissertations

Since the discovery of fullerenes in 1985, their exohedral functionalization has been necessary to increase their solubility and explore their properties and potential applications in materials science and medicinal chemistry. This Thesis provides a short overview of the importance of electronic, size and shape complementarity in determining the structures of specific endohedral fullerene compounds. This is followed by a description of a new method for the separation of scandium nitride endohedral fullerenes Sc3N@C2n (n = 34, 39 and 40), and their monofunctionalization.

We also present the regioselective synThesis of easily isolable bis-derivatives of C60, C70, and M3N@Ih-C80 (M = Sc, …

Study Of A Directly Heated Oxy-Fuel Supercritical Power Generation System, A S M Arifur Rahim Chowdhury

Open Access Theses & Dissertations

The Directly heated supercritical oxy-fuel gas turbines have the potential to become an important addition to current power generation systems. They provide a higher thermal efficiency and more effective carbon capture techniques than existing gas turbines. Due to the higher density of the working fluids, the turbomachinery size in these systems can be reduced significantly; this will facilitate to minimize the operational cost. To achieve supercritical working fluid at the turbine inlet combustion needs to be conducted under enormous amounts of pressure; these values are is about 10 times those found in the present gas turbines. Additionally, existing material operational …

Re-Examining Resistance: Fan-Produced Queer Readings And Teen Wolf, Joshua J. Espinoza

Open Access Theses & Dissertations

MTV's popular television series, Teen Wolf (2011), has amassed a large online following of fans that create their own queer narratives through fan-fiction, subverting the show's hegemonic heteronormativity. Through a textual thematic analysis of Teen Wolf, this case study illustrates how online fandoms can subvert hegemony through queer readings of literary characters, resisting the dominant heteronormativity on network television. This article argues that rearticulating the showâ??s narratives into queer readings functions as a form of LGBT resistance, effectively counteracting the heteronormativity and hegemony portrayed on screen. This study examines how Teen Wolf approaches queer content, including homoeroticism and LGBT themes …

Transition States And Modeling For Co9s8/Mos2 Catalysis, Gabriel Angel Gonzalez

Open Access Theses & Dissertations

Transition state computational studies of the sulfur removal from dibenzothiophene (DBT) molecule have herein been performed considering the Co9S8/MoS2 interface existing on unsupported Co/MoS2 catalysts. The linear synchronous transit (LST) and quadratic synchronous transit (QST) methods integrated in a density functional theory (DFT) program such as Dmol3 were used for the calculations of energy barriers of the transition states. Three different configurations present on the Co9S8/MoS2 interface have been envisaged as possible catalytic sites: sulfur-sulfur (S, S) sites, and molybdenum-sulfur (Mo, S) and molybdenum-molybdenum (Mo, Mo) edge sites. This study revealed that the (Mo, Mo) edge site is the most …

An Improved Sin-Hyperbolic Constitutive Model For Creep Deformation And Damage, Mohammad Shafinul Haque

Open Access Theses & Dissertations

Inspection and maintenance of industrial gas turbines (IGTs) cost millions of dollars. Growing demand of obtaining higher IGT efficiency leads to higher temperature and pressure operating conditions. Long exposure of turbine components at elevated temperature and pressure

makes creep damage critically important to consider during planning, designing and operating conditions. Effective and economic maintenance requires accurate creep deformation, damage

evolution and rupture life prediction information. Creep prediction models are used to determine the state of the turbine components and to schedule the inspection, maintenance and replacement time periods. The more accurate the prediction model, the less is the overall cost …

High Temperature Helical Tubular Receiver For Concentrating Solar Power System, Nazmul Hossain

Open Access Theses & Dissertations

In the field of conventional cleaner power generation technology, concentrating solar power systems have introduced remarkable opportunity. In a solar power tower, solar energy concentrated by the heliostats at a single point produces very high temperature. Falling solid particles or heat transfer fluid passing through that high temperature region absorbs heat to generate electricity. Increasing the residence time will result in more heat gain and increase efficiency. A novel design of solar receiver for both fluid and solid particle is approached in this paper which can increase residence time resulting in higher temperature gain in one cycle compared to conventional …

Study Of Materials And Machines For 3d Printed Large-Scale, Flexible Electronic Structures Using Fused Deposition Modeling, Seyeon Hwang

Open Access Theses & Dissertations

The 3 dimensional printing (3DP), called to additive manufacturing (AM) or rapid prototyping (RP), is emerged to revolutionize manufacturing and completely transform how products are designed and fabricated. A great deal of research activities have been carried out to apply this new technology to a variety of fields. In spite of many endeavors, much more research is still required to perfect the processes of the 3D printing techniques especially in the area of the large-scale additive manufacturing and flexible printed electronics.

The principles of various 3D printing processes are briefly outlined in the Introduction Section. New types of thermoplastic polymer …

Design Of A High Intensity Turbulent Combustion System, Mohammad Arif Hossain

Open Access Theses & Dissertations

In order to design next generation gas turbine combustor and rocket engines, a systematic study of flame structure at high intensity turbulent flow is necessary. The fundamental study of turbulent premixed combustion has been a major research concern for decades. The work is focused on the design and development of a high intensity turbulent combustion system which can be operated at compressible (0.3 < M < 0.5), preheated (T0=500K) and premixed conditions in order to investigate the 'Thickened Flame' regime. An air-methane mixture has been used as the fuel for this study. An optically accessible backward-facing step stabilized combustor has been designed for a maximum operating pressure of 6 bar. A grid has been introduced with different blockage ratios (BR = 54%, 61% & 67%) in order to generate turbulence inside the combustor for the experiment. Optical access is provided via quartz windows on three sides of the combustion chamber. Finite Element Analysis (FEA) is done in order to verify the structural integrity of the combustor at rated conditions. In order to increase the inlet temperature of the air, a heating section was designed to use commercially available in-line heaters. Separate cooling subsystems have been designed for chamber cooling and exhaust cooling. The LabVIEW software interface has been selected as the control mechanism for the experimental setup. A 10 kHz Time Resolved Particle Image Velocimetry (TR-PIV) system and a 3 kHz Planer Laser Induced Fluorescence (PLIF) system have been integrated with the system in order to diagnose the flow field and the flame respectively. The primary understanding of the flow field inside the combustor was achieved through the use of Detached Eddy Simulation (DES) by using commercially available software package ANSYS FLUENT. Preliminary validation is done by 10 kHz TR-PIV technique. Both qualitative and quantitative analysis have been done for CFD and experiment. Major flow parameters such as average velocity, fluctuation of velocity, kinetic energy, and turbulent intensity have been calculated for two distinct Reynolds number (Re = 815 & 3500). PIV results are compared with CFD results which show significant agreement with each other.