Engineering Commons^™

A Java Framework For Computer Vision, Stephen Sheridan

The ITB Journal

This paper outlines a framework implemented entirely in Java that attempts to give students exposure to computer vision systems from a practical standpoint. Various tools and technologies are introduced that will allow a student to acquire an input image through a WebCam, extract useful information from that input image and finally, attempt to make sense of the input.

Globalcom, Declan Barber, Conor Gildea, Gavin Byrne

The ITB Journal

The objective of this developed application is to provide a company with a means of communicating with its employees no matter where they are physically located and what communication resources they may have at any particular time. The core focus of this application is to provide a Unified Messaging System using synchronous and asynchronous forms.

Near-Field Microwave Microscopy For Surface And Subsurface Characterization Of Materials, Maria Fernanda Cordoba Erazo

USF Tampa Graduate Theses and Dissertations

This dissertation presents an investigation on the capabilities of Near-Field Microwave Microscopy (NFMM) for the characterization of surface and subsurface materials. Subsurface characterization refers to the detection, differentiation and imaging of dielectric, and metallic features that are coated with an insulating layer. The design, simulation and modeling, and testing of a dielectric resonator (DR)-based NFMM and a coaxial transmission line resonator-based NFMM are discussed in detail in this work. Additionally, materials differentiation and imaging capabilities of each microscope are examined using several bulk samples, liquids, GaAs MMIC circuits, and gold/glass testing patterns.

The 5.7 GHz DR-based NFMM uses a microwave …

A Combined Energy And Geoengineering Optimization Model (Ceagom) For Climate Policy Analysis, John George Anasis

Dissertations and Theses

One of the greatest challenges that will face humanity in the 21^st century is the issue of climate change brought about by emissions of greenhouse gases. Energy use is one of the primary sources of greenhouse gas emissions. However, it is also one of the most important contributors to improved human welfare over the past two centuries and will continue to be so for years to come. This quandary has led a number of researchers to suggest that geoengineering may be required in order to allow for continued use of fossil fuels while at the same time mitigating the …

Transport Of Heat Activated Persulfate And Its Application For In-Situ Chemical Oxidation Of Residual Trichloroethylene, Lauren Dekker Quig

Dissertations and Theses

In situ chemical oxidation is a promising technology for the remediation of persistent subsurface contamination. Increasingly, the persulfate ion is being studied for use in these systems, both on its own as a strong oxidant and as the precursor to the even more reactive sulfate radical. Persulfate has been shown to treat a wide range of contaminants, from traditional Superfund contaminants such as chlorinated solvents to emerging pharmaceutical contaminants. Additionally, persulfate ISCO can be tailored to site and pollutant specific characteristics based on the method of persulfate activation (e.g., energy and catalysis activation) to the sulfate radical. Thermal activation of …

Heat Transfer Analysis Of Slot Jet Impingement Onto Roughened Surfaces, Rashid Ali Alshatti

USF Tampa Graduate Theses and Dissertations

The effect of surface roughness on jet impingement heat transfer was investigated in this research. A numerical analysis was conducted for free surface slot jet impinging normally onto a heated plate. Six different geometries and three different plate materials were investigated. The cooling fluid used for the analysis was water, and the flow was laminar with a range of Reynolds number (Re) from 500 to 1000. Temperature distribution, local and average heat transfer coefficient, and local and average Nusselt number were presented for each case.

The steady state heat transfer results show that the increase in Reynolds number (Re) increases …

Kinematic Control Of Redundant Mobile Manipulators, Mustafa Mashali

USF Tampa Graduate Theses and Dissertations

A mobile manipulator is a robotic arm mounted on a robotic mobile platform. In such a system, the degrees of freedom of the mobile platform are combined with that of the manipulator. As a result, the workspace of the manipulator is substantially extended. A mobile manipulator has two trajectories: the end-effector trajectory and the mobile platform trajectory. Typically, the mobile platform trajectory is not defined and is determined through inverse kinematics. But in some applications it is important to follow a specified mobile platform trajectory. The main focus of this work is to determine the inverse kinematics of a mobile …

Structure And Corrosion Behavior Of Sputter Deposited Cerium Oxide Based Coatings With Various Thickness On Al 2024-T3 Alloy Substrates, Yuanyuan Liu, Jiamu Huang, James B. Claypool, Carlos E. Castano, Matthew J. O'Keefe

Materials Science and Engineering Faculty Research & Creative Works

Cerium oxide-based coatings from ∼100 to ∼1400 nm in thickness were deposited onto Al 2024-T3 alloy substrates by magnetron sputtering of a 99.99% pure CeO₂ target. The crystallite size of CeO₂ coatings increased from 15 nm to 46 nm as the coating thickness increased from ∼100 nm to ∼1400 nm. The inhomogeneous lattice strain increased from 0.36% to 0.91% for the ∼100 nm to ∼900 nm thick coatings and slightly decreased to 0.89% for the ∼1400 nm thick coating. The highest adhesion strength to Al alloy substrates was for the ∼210 nm thick coating, due to a continuous …

Wideband Fluorescence-Based Thermometry By Neural Network Recognition: Photothermal Application With 10 Ns Time Resolution, Liwang Liu, Kuo Zhong, Troy Munro, Salvador Alvarado, Renaud Cote, Sebastiaan Creten, Eduard Fron, Heng Ban, Mark Van Der Auweraer, N. B. Roozen, Osamu Matsuda, Christ Glorieux

Mechanical and Aerospace Engineering Faculty Publications

Neural network recognition of features of the fluorescence spectrum of a thermosensitive probe is exploited in order to achieve fluorescence-based thermometry with an accuracy of 200 mK with 100 MHz bandwidth, and with high robustness against fluctuations of the probe laser intensity used. The concept is implemented on a rhodamine B dyed mixture of copper chloride and glycerol, and the temperature dependent fluorescence is investigated in the temperature range between 234 K and 311 K. The spatial dependence of the calibrated amplitude and phase of photothermally induced temperature oscillations along the axis of the excitation laser are determined at different …

Sub-Orbital Spaceflight – An Addition To Our Multi-Modal Transportation System, Scott Haeffelin

Space Traffic Management Conference

The number of commercial spaceflights will be increasing by orders of magnitude over the next several decades. The current volume of space traffic can be managed on a case-by-case basis and there is little impact to the National Airspace System (NAS). This will change as more spaceports become operational, commercial sub-orbital flight companies begin serving their customers and as the cost of these flights begin to decrease. Current regulatory paths seek to allow the flexibility in the regulations for this industry to flourish while also maintaining a high standard of safety. There are, however, many nearsighted and old fashioned assumptions …

Developing Key Performance Indicators To Measure The Effectiveness Of Early Facilities Management Performance On Bim Governed Public Sector Projects, Barry Mcauley, Alan Hore, Roger West

Conference papers

Governments across the globe are now recognising the need to take steps to better manage their property portfolios due to the escalating costs of operating these buildings over their lifetime. This has seen them turn towards innovative work practices and technologies offered by Building Information Modelling (BIM). It is now becoming increasingly evident that BIM can bring significant added value to the design, construction and most importantly to the operational life of a public sector development project. This experience has resulted in a number of governments moving towards implementing BIM for all public works projects. BIM allows the building to …

The Application Of Industry Standards As An Alternative To In-House Proprietary Standards Within The Aec Iindustry, Robert Moore, Alan Hore, Barry Mcauley

Conference papers

The move from traditional 2D Computer Aided Design (CAD) practices towards Building Information Modelling (BIM) has witnessed some practices trying to adopt and update their own in-house CAD standards. These standards are wholly inadequate for working in a collaborative BIM environment and mean that they repetitively create and recreate local, non-reusable, non-interoperable solutions to the same problems, which leads to the employees potentially having to learn a new collaborative process every time they have to work with a new project team. Collaborative standards help teams produce information through a standardised process, so as to ensure the same form and quality …

Improving The Integration Of Launch And Reentry Operations Into The National Airspace System, Gwendolyn Mazzotta, Daniel P. Murray

Space Traffic Management Conference

With increasing commercial space activities occurring in the National Airspace System, the FAA has identified a need for more efficient management of the NAS with respect to commercial space operations. Current methods for integration of aviation and space activities employ a segregation approach, in which hazard areas are constructed around launch and reentry operations and sections of airspace are closed to other users. Mission objectives and vehicle characteristics dictate the extent of the closure in terms of location, duration, and volume of airspace affected. Launches, reentries, and other operations have an effect on other NAS stakeholders, causing delays, changes to …

Space Data Integrator (Sdi) And Space Program Integrated Data And Estimated Risk (Spider): Proof-Of-Concept Software Solution For Integrating Launch And Reentry Vehicles Into The National Airspace System (Nas), Devin D. Dickens

Space Traffic Management Conference

The Space Data Integrator (SDI) Project is the initial step to satisfy the Federal Aviation Administration (FAA) strategic initiative to integrate commercial space launch and reentry vehicles into the National Airspace System. The project addresses the needs for greater situational awareness and monitoring, and increased response capability during non-nominal and catastrophic incidents during space operations.

The initial phase of this project leverages current FAA systems, and provide an initial demonstration of capability that will provide for state data from a commercial reentry vehicle to be ingested into a the FAA Traffic Flow Management System, and displayed on Traffic Situation Displays. …

Safe Operations Above Fl600, Lt. Col. Stephen Hunter

Space Traffic Management Conference

Safe Operations Above FL600

Abstract

With the increase in likelihood of near-term development of revenue-generating point-to-point suborbital flights and the increase in high-altitude-long-endurance commercial operations above FL600, the criticality of addressing operations above class A airspace has never been more pressing. While the Federal Aviation Administration describes the National Airspace System, it doesn’t offer a description that includes a top. Technological, physiological, physical and administrative limitations have relegated most air operations to FL600 and below. As that changes, previous work on Space Traffic Management (STM) concepts begin to take on new life and add to sincere considerations for adaptation or …

Evaluating Launch Vehicle / Reentry Vehicle (Lv/Rv) Separation Concepts, Zheng Tao, Ganghuai Wang, Tudor Masek, Thomas J. St. Clair

Space Traffic Management Conference

Launch Vehicle/Reentry Vehicle (LV/RV) operations are expected to increase across the National Airspace System (NAS) as their reliability and availability improve. LV/RV designs and the industry landscape have vastly changed since the 1960’s, and the Federal Aviation Administration’s (FAA) methods for handling these operations need to evolve to support the expected growth. Currently, large amounts of airspace are segregated for every LV/RV operation. This increases costs for NAS users and may limit LV/RV opportunities. The FAA’s NextGen office recently proposed two more efficient separation concepts for LV/RV operations called Space Transition Corridors, and Four-Dimensional Trajectory Deconfliction. Prior safety research for …

Identification Protocols In Cryptography, Michael O’Donnell

The ITB Journal

In this paper we examine the role of Identification Protocols in the field of Cryptography. Firstly, the rationale behind the need for Identification Protocols is discussed. Secondly, we examine, in detail, challenge-response protocols, based upon zero-knowledge proofs, that form a subset of Identification Protocols in general. Thirdly, the mathematical tools necessary for the understanding of how these protocols work is given. Finally, we discuss four main Identification Protocols: Fiat-Shamir, Feige-Fiat-Shamir, Schnorr and Guillou- Quisquater. This discussion includes the theory, practical examples and the security aspects of each protocol.

Internet Applications Development Issues And Strategic Considerations, Róisín Faherty

The ITB Journal

This paper examines the development issues and strategic considerations involved in Internet Applications Development. The prevalent development environments are discussed highlighting their advantages and disadvantages. Issues regarding the development of Internet applications are viewed under the headings of human resource, organizational, technological, investment and Legal Issues. Lastly the paper gives an overview of the strategic implications for an organization considering the development of Internet Applications. These include security, quality and the look & feel of the application. This paper is not intended as a definitive resource on the area of Internet Applications Development, its aim is to highlight the areas …

Mental Spaces: Processes For Establishing And Linking Spaces, Brian Nolan

The ITB Journal

This paper reviews the theory of mental spaces as expounded by Fauconnier (1994). In this work he posits a theory in which reference has a structural dimension. Within the theory, this structure is represented using spaces, connectors across the spaces and some general principles that are found to apply. The complexity lies in the interaction between the principles and in the contextual structures that feed into the principles for interpretation. Brugman, in her 1996 paper, makes use of insights from mental spaces theory to conduct an analysis of HAVE-constructions. She notes that Fauconnier has “elaborated a theory of partial possible …

A Review Of Parallel Mappings For Feed Forward Neural Networks Using The Backpropagation Learning Algorithm, Stephen Sheridan

The ITB Journal

The Back-Propagation (BP) Neural Network (NN) is probably the most well known of all neural networks. Many mappings of the BP NN have been implemented for both special purpose and general-purpose computers. This mapping process can fall into one of two categories: heuristic mapping and algorithmic mapping. Heuristic mapping concentrates on the architecture and behaviour of the network as it trains whereas algorithmic mapping concentrates on the parallelization of the learning algorithm. Mappings in the heuristic category tend to take a trial and error approach based on the understanding of the network and of the target machine. In comparison mappings …

Augmented Finite Element Method For Virtual Testing Of High Temperature Cmcs, Qingda Yang, Jaedal Jung, Bao-Chan Do

Composites at Lake Louise (CALL 2015)

Ceramic matrix composites (CMCs) have been increasingly used in high heat flux applications due to their ultra-high temperature resisting capabilities. However, CMCs are prone to processing-induced or in-serve cracking due to the large thermal stresses. Thermally-induced cracking are dangerous because they provide pathways for further damaging processes such as oxidation and vapor-assisted corrosion, which may lead to catastrophic failure [1]. High-fidelity thermal-mechanical analyses to CMCs with consideration of arbitrary cracking are very challenging because the heterogeneous nature makes it impossible to know the cracking locations a priori. Yet correct and efficient treatment of crack coalescence and bifurcation is critical …

Lunar Icecube: Nextstep Lunar Cubesat Mission And Instrument Concept, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs associates titled "Lunar IceCube: NEXTSTEP Lunar Cubesat Mission and Instrument Concept" from November 12, 2015.

Estimating Likelihood Of Having A Brca Gene Mutation Based On Family History Of Cancers And Recommending Optimized Cancer Preventive Actions, Mehrnaz Abdollahian

USF Tampa Graduate Theses and Dissertations

BRCA1 and BRCA2 are gene mutations that drastically increase chances of developing breast and ovarian cancers, up to 20-fold, for women. A genetic blood test is used to detect BRCA mutations. Though these mutations occur in one of every 400 in the general population (excluding Ashkenazi Jewish ethnicity), they are present in most cases of hereditary breast and ovarian cancer patients. Hence, it is common practice for the physicians to require genetic testing for those that fit the rules as recommended by the National Cancer Comprehensive Network. However, data from the Myriad Laboratory, the only provider of the test until …

Size-Controlled Large-Diameter And Few-Walled Carbon Nanotube Catalysts For Oxygen Reduction, Xianliang Wang, Qing Li, Hengyu Pan, Ye Lin, Yujie Ke, Haiyang Sheng, Mark T. Swihart, Gang Wu

Faculty Publications

We demonstrate a new strategy for tuning the size of large-diameter and few-walled nitrogen-doped carbon nanotubes (N-CNTs) from 50 to 150 nm by varying the transition metal (TM = Fe, Co, Ni or Mn) used to catalyze graphitization of dicyandiamide. Fe yielded the largest tubes, followed by Co and Ni, while Mn produced a clot-like carbon morphology. We show that morphology is correlated with electrocatalytic activity for the oxygen reduction reaction (ORR). A clear trend of Fe > Co > Ni > Mn for the ORR catalytic activity was observed, in both alkaline media and more demanding acidic media. The Fe-derived N-CNTs exhibited …

Optical Imaging Of Finger For Blood Pressure Monitoring Of The Driver, Mohammad Motasim Bellah, Mohammad Raziul Hasan, Samir M. Iqbal

Electrical and Computer Engineering Faculty Publications

Cardiovascular diseases (CVDs) are number one reason for human mortality around the world (Fig. 1) [1]. Pulse pressure (PP) and pulse rate (PR) are considered as the two most vital physiological markers for CVDs like myocardial infarction, cardiac arrhythmia, and heart failure. Currently, long-term PP and PR analysis is not possible due to the lack of systems that can frequently measure the data over a period of time. Motor vehicle drivers with known CVDs are at higher risk due to traffic air pollution.

This paper presents our work on an inexpensive and readily deployable approach that keeps track of PP …

Ensuring That The Needs Of The End User Are Effectively Communicated Through Bim During The Building Design Stage, Barry Mcauley, Alan Hore, Roger West, Louis Gunnigan

Conference papers

The Grangegorman Development Project is the largest single development of 3rd level education accommodation in the history of the Irish State. Planned for completion in 2023, it will relocate all of Technological University of Dublin’s (DIT) activities from their current 39 locations to a single campus. This is a once-off opportunity for DIT and it is therefore critical that the campus is designed to meet end-users’ needs. As part of the strategy to achieve this, it has been specified that all work packages within the campus must use Building Information Modelling (BIM) in the design, construction and the planning of …

Collaborative Public Works Contracts Using Bim – An Opportunity For The Irish Construction Industry?, Barry Mcauley, Alan Hore, Robert Kane, Simon Fraser

Conference papers

In Ireland, large and progressive contractors are claiming significant benefits in construction management efficiency through the implementation of BIM (Building Information Modelling). While these contractors note that the cost benefits to the project budget alone justify the implementation of BIM in the field, they are acutely aware that in 2011 the UK Government has mandated the construction industry in the UK to use BIM on all public projects by 2016. In the Republic of Ireland however, in 2007, the Government introduced the Public Works Contracts (PWC) suite for the procurement of all public sector works. After 8 years of working …

The Role Of Cryptography In Security For Electronic Commerce, Ann Murphy, David Murphy

The ITB Journal

Many businesses and consumers are wary of conducting business over the Internet due to a perceived lack of security. Electronic business is subject to a variety of threats such as unauthorised access, misappropriation, alteration and destruction of both data and systems. This paper explores the major security concerns of businesses and users and describes the cryptographic techniques used to reduce such risks.

Novel Anti-Decay Self-Setting Paste Of Hydroxyapatite/Collagen Nanocomposite Utilizing Gptms, Masanori Kikuchi, Taira Sato, Mamoru Aizawa, Yuki Shirosaki

Composites at Lake Louise (CALL 2015)

Bone is a typical inorganic/ortganic nanocomposite mainly composed of hydroxyapatite (HAp) nanocrystals and collagen molecules. The composition and nanostructure is closely related to bone’s biomechanical and biochemical properties. One of the most important things for bone is a bone remodeling process that maintains mechanical strength of bone to allow walking and running as well as homeostasis of calcium in our body. In fact, sintered HAp composed of HAp crystals approximately 1 µm in particle size is considered as non-bioresorbable; however HAp nanocrystals easily resorbed by osteoclasts. A hydroxyapatite/collagen bone-like nanocomposite (HAp/Col) was successfully synthesized by the authors via self-organizing process. …

Physical Aging And Glass Transition Of Single Component Nanocomposites, Hilmar Koerner

Composites at Lake Louise (CALL 2015)

Matrix free assemblies of polymer-grafted, “hairy” nanoparticles (HNP) exhibit novel morphology, dielectric and mechanical properties, as well as providing means to overcome dispersion challenges ubiquitous to conventional polymer-inorganic blended nanocomposites. Physical aging of the amorphous polymer glass between the close-packed nanoparticles (NPs) will dominate long-term stability. However, the energetics of cooperative relaxation of tethered chains confined within the interstitial spaces in single component nanocomposites is unknown. Herein, we compare glass transition temperature (Tg) and physical aging behavior of matrix free assemblies of HNPs (aHNPs) to conventional NP-polymer blends, across different nano-silica loadings (0-50 v/v%) and brush architecture of grafted polystyrene …