Engineering Commons^™

A Simulation-Based Approach To Risk Assessment And Mitigation In Supply Chain Networks, Mamadou Seck, Ghaith Rabadi, Christian Koestler

Engineering Management & Systems Engineering Faculty Publications

We present in this paper a simulation-based approach to evaluate the risk associated with supply chain disruptions caused by failures in some supply chains nodes and measure the impact of such disruptions on supply chain key performance measures (KPIs) of interest. The proposed framework enables analysts and managers to repeatedly assess the risk to their supply chains based on various simulated scenarios and identify the most critical nodes whose disruption will have the highest impact on the KPIs of interest. As a result, companies can focus on the most critical supply chain assets and develop targeted mitigation plans that minimize …

Statistical Engineering: A Causal-Stochastic Modeling Research Update, Teddy Steven Cotter

Engineering Management & Systems Engineering Faculty Publications

In the ASEM-IAC 2012, Cotter (2012) summarized prior works that led to the proposal for statistical engineering, identified the gaps in knowledge that statistical engineering needs to address, explored additional gaps in knowledge not addressed in the prior works, set forth a working definition of and body of knowledge for statistical engineering, and set forth proposals of potential systems contributions the Engineering Management profession could make toward the development of statistical engineering. In 2014, the ASQ Statistics Division, DOT&E, NASA, and IDA co-sponsored a Statistical Engineering Agreement to jointly research development of the discipline of statistical engineering. The statistics community …

Using Computer-Aided Design Software And 3d Printers To Improve Spatial Visualization, Petros Katsioloudis, Millie Jones

STEMPS Faculty Publications

Many articles have been published on the use of 3D printing technology. From prefabricated homes and outdoor structures to human organs, 3D printing technology has found a niche in many fields, but especially education. The education of technology and engineering students has come a long way from traditional instruction using hand drawings. Although drawings may still be a part of a students learning, computer technology has been embraced in this field for several years. With the introduction of AutoCAD technical drawing programs and now 3D printing, learners can use 3D printed models to develop their spatial abilities in technology and …

Vapor Flow Resistance Of Dry Soil Layer To Soil Water Evaporation In Arid Environment: An Overview, Xixi Wang

Civil & Environmental Engineering Faculty Publications

Evaporation from bare sandy soils is the core component of the hydrologic cycle in arid environments, where vertical water movement dominates. Although extensive measurement and modeling studies have been conducted and reported in existing literature, the physics of dry soil and its function in evaporation is still a challenging topic with significant remaining issues. Thus, an overview of the previous findings will be very beneficial for identifying further research needs that aim to advance our understanding of the vapor flow resistance (VFR) effect on soil water evaporation as influenced by characteristics of the dry soil layer (DSL) and evaporation zone …

Assessing Approximate Arithmetic Designs In The Presence Of Process Variations And Voltage Scaling, Adnan Aquib Naseer

Electronic Theses and Dissertations

As environmental concerns and portability of electronic devices move to the forefront of priorities, innovative approaches which reduce processor energy consumption are sought. Approximate arithmetic units are one of the avenues whereby significant energy savings can be achieved. Approximation of fundamental arithmetic units is achieved by judiciously reducing the number of transistors in the circuit. A satisfactory tradeoff of energy vs. accuracy of the circuit can be determined by trial-and-error methods of each functional approximation. Although the accuracy of the output is compromised, it is only decreased to an acceptable extent that can still fulfill processing requirements. A number of …

Modeling,Metrics, And Optimal Design For Solar Energy-Powered Base Station System, Heng Wang, Hongjia Li, Chaowei Tang, Lingbao Ye, Xin Chen, Hui Tang, Song Ci

Department of Electrical and Computer Engineering: Faculty Publications

Using renewable energy system in powering cellular base stations (BSs) has been widely accepted as a promising avenue to reduce and optimize energy consumption and corresponding carbon footprints and operational expenditures for 4G and beyond cellular communications. However, how to design a reliable and economical renewable energy powering (REPing), while guaranteeing communication reliability, renewable energy utilization, and system durability, is still a great challenge. Motivated by this challenge, we firstly model the dynamic energy flow behavior of solar energy-powered BS by using stochastic queue model, jointly considering instability of solar energy generation, non-linear effects of energy storage, and time varies …

Visualizing Nanoscale Excitonic Relaxation Properties Of Disordered Edges And Grain Boundaries In Monolayer Molybdenum Disulfide, Wei Bao, Nicholas J. Borys, Changhyun Ko, Joonki Suh, Wen Fan, Andrew Thron, Yingjie Zhang, Alexander Buyanin, Jie Zhang, Stefano Cabrini, Paul D. Ashby, Alexander Weber-Bargioni, Sefaattin Tongay, Shaul Aloni, D. Frank Ogletree, Junqiao Wu, Miquel B. Salmeron, P. James Schuck

Department of Electrical and Computer Engineering: Faculty Publications

Two-dimensional monolayer transition metal dichalcogenide semiconductors are ideal building blocks for atomically thin, flexible optoelectronic and catalytic devices. Although challenging for two-dimensional systems, sub-diffraction optical microscopy provides a nanoscale material understanding that is vital for optimizing their optoelectronic properties. Here we use the ‘Campanile’ nano-optical probe to spectroscopically image exciton recombination within monolayer MoS2 with sub-wavelength resolution (60 nm), at the length scale relevant to many critical optoelectronic processes. Synthetic monolayer MoS2 is found to be composed of two distinct optoelectronic regions: an interior, locally ordered but mesoscopically heterogeneous two-dimensional quantum well and an unexpected B300-nm wide, energetically disordered edge …

A Study Of The Huff Run Watershed, Benjamin Habig

Williams Honors College, Honors Research Projects

Acid mine drainage is the formation and movement of highly acidic water rich in heavy metals. The Huff Run watershed, located in Carrolton and Tuscarawas counties, is heavily polluted due to the several abandoned mines throughout the area. This research project serves to further a study began under the supervision of Dr. Cutright of the University of Akron. The Ohio Department of Natural Resources (ODNR) has instituted an abatement plan in Mineral City. The plan, involving a retention pond, a wetland, and a limestone bed inoculated of bacteria, has been found to reduce pollutant levels substantially. However, the limestone bed …

Evaluation Of Static Vs. Dynamic Visualizations For Engineering Technology Students And Implications On Spatial Visualization Ability: A Quasi-Experimental Study, Petros Katsioloudis, Daniel Dickerson, Vukica Jovanovic, Mildred Jones

STEMPS Faculty Publications

The benefit of using static versus dynamic visualizations is a controversial one. Few studies have explored the effectiveness of static visualizations to those of dynamic visualizations, and the current state of the literature remains somewhat unclear. During the last decade there has been a lengthy debate about the opportunities for using animation in learning and instruction. More specifically it has been shown that dynamic visualizations often provide no advantages over static visualizations. If they had shown advantages, it was due to the fact that more information was available in the animated than in the static version. Given this result, the …

Brainstorm Radiation Systems Inc, Calia Battista, Leah Krichbaum, Lauren Wickert, Cody George, Ryan Manges

Williams Honors College, Honors Research Projects

Many different designs have been created to immobilize patients for radiation therapy of the head and neck. Options exist which result in varying degrees of patient comfort, radiation attenuation, and limitation of movement. While one requirement can be met effectively, it is difficult to design a system which adequately meets all requirements for radiation therapy. Brainstorm Radiation Systems aims to address all of these variables and transform the patient and technician experience during radiation treatment. The requirements for our head and neck immobilization design were to immobilize the patient within 3mm of movement for at least 30 minutes, and must …

Skin Detection In Hyperspectral Images, Stephanie Sanchez

Open Access Theses & Dissertations

Hyperspectral imagers collect information of the scene being imaged at close contiguous bands in the electromagnetic spectrum at high spectral resolutions. Hyperspectral images are organized in a data cube where the x and y axes contain spatial information and the z-axis contains spectral information. The number of applications for these imagers has grown over the years as they are now used in various fields (i.e. agriculture, surveillance, chemical imaging, environmental, medical, etc.). Many algorithms are described in the literature for skin detection in color imagery. However increased detection accuracy, in particularly over cluttered backgrounds, and of small targets and in …

Neighbor Discovery In Mobile Ad Hoc Networks, Esau Enrique Ruiz-Gaistardo

Open Access Theses & Dissertations

Neighbor Discovery (ND) is the process that initializes a reliable communication between one-hop neighbors in mobile ad hoc networks (MANETs). This process consists of scheduled exchanges of control messages, called â??Hello Messagesâ?? (HMs) between one-hop neighbors. HMs build bidirectional links that are used to announce the topology information. Each node uses ND and the topology information to populate its routing tables and to communicate with every other node in the network. In MANETs, ND process is a permanent process to discover one-hop neighbors. It is based on two parameters: 1) ND message interval (the period of time in between sending …

Carbon Based Nano-Composite Materials For Energy Storage Applications, Gerardo Rodriguez Melo

Open Access Theses & Dissertations

Energy storage systems and devices are an integral part of advanced electronic technology. Electronic technology is ever-advancing, but in order to do so, it must be supported by all its systems. The energy storage system is one key system that may dictate the performance and limitation of such electronics. Thus, research emphasis on energy storage devices has been on improving the performance of energy storage devices, such as: improved energy and power density, increased stability and cycle life, as well as reduced costs. Lithium-ion-batteries, and supercapacitors offer the potential to meet energy storage demands and to be improved further upon. …

Reaction Of Liquid Aluminium- Samarium Alloys With B4c At Ultra High Temperatures, Sanjay Shantha-Kumar

Open Access Theses & Dissertations

Reactive studies between a packed bed of B4C and Al-Sm-Me (Me = Ti, Zr, Hf) alloy melts were carried out under a pseudo-isopiestic thermodynamic system. A graphite enclosure isolated the system under a temperature gradient with one end reaching temperatures greater than 1800 K and the opposite end of the graphite enclosure contains liquid Al with temperatures approximating 950 K. The liquid Al establishes an oxygen potential to control oxidation of very reactive elements (i.e., Al, Sm and Ti). The Al-Sm-Me alloy infuses into a packed bed of B4C reacting exothermically to form borides and carbides depending on the thermodynamic …

High Temperature Oxidation Of Nb-Cr-Mo-Si-B Alloys, Kathryn S. Thomas

Open Access Theses & Dissertations

It has been the trend to use nickel based superalloys in high temperature applications, however higher temperatures are required in the effort to enhance the efficiency of such components as jet turbine engines. The melting temperature of the nickel based superalloy limits the extent to which temperature can be raised as these materials are typically used at temperatures within 200 degrees of their melting point. Refractory metal based systems are attractive due to their high melting points, low densities, and good high temperature strength. However, in such cases as niobium, poor oxidation resistance limits the widespread use of such alloys. …

Single And Multiple Objective Biomass-To-Biofuel Supply Chain Optimization Considering Environmental Impacts, Claudia Evangelina Valles Sosa

Open Access Theses & Dissertations

Bioenergy has become an important alternative source of energy to alleviate the reliance on petroleum energy. Bioenergy offers diminishing climate change by reducing Green House Gas Emissions, as well as providing energy security and enhancing rural development. The Energy Independence and Security Act mandate the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. It is clear that Biomass can make a substantial contribution to supply future energy demand in a sustainable way. However, the supply of sustainable energy is one of the main challenges that mankind will face over …

Defeating Anisotropy In Material Extrusion 3d Printing Via Materials Development, Ángel Ramón Torrado Pérez

Open Access Theses & Dissertations

Additive Manufacturing technologies has been in continuous development for more than 35 years. Specifically, the later denominated Material Extrusion Additive Manufacturing (MEAM), was first developed by S. Scott Crump around 1988 and trademarked later as Fused Deposition Modeling (FDM). Although all of these technologies have been around for a while, it was not until recently that they have been more accessible to everyone. Today, the market of 3D printers covers all ranges of price, from very specialized, heavy and expensive machines, to desktop printers of only a few cubic inches in volume. Until recently, FDM technology had remained somewhat stagnant …

A Methodology For Physically-Based Contact And Meniscus Properties In Rigid-Body Computational Knee Modeling, Stephen Wilson

Open Access Theses & Dissertations

Determining natural inner knee mechanics is a longstanding goal for researchers with applications to prevention and treatment of knee trauma and osteoarthritis. Physical testing has only provided limited information of knee mechanics due to technical challenges and cost. Modeling has been used for decades to obtain some of this otherwise inaccessible information, and recently finite element analysis (FEA) has become a popular means to this end. However, FEA requires time intensive mesh-creation and has large computational requirements. Ideally, model creation should be easy and simulations should be fast to allow for sensitivity analysis. Although allowing easier model creation and offering …

Modeling Of The Response Of A Memcapacitor For An Impulse, Step, Ramp, And Sinusiodal Inputs, Ghassan Khalil Kachmar

Open Access Theses & Dissertations

Micro-Electro-Mechanical Systems, or MEMS, is a technology of very small scale devices. The dimensions of MEMS can vary from below one micron to several millimeters. MEMS have some mechanical functionalities such as the moving plate of a parallel plate capacitor (memcapacitor). MEMS researchers and developers have demonstrated an extremely large number of microsensors for almost every possible sensing modality including temperature, pressure, inertial forces, and chemical species. The equation of motion of the moving plate of a memcapacitor is governed by a non-linear differential equation with no known exact solution. Most research into determining the theoretical response of a memcapacitor …

Low Power Design Techniques For Data Acquisition, Praveen Kumar Palakurthi

Open Access Theses & Dissertations

Semiconductor technology advancement continues to lead to smaller device geometries. Digital circuits have benefited from the technology scaling whereas analog circuits often suffer in terms of performance and noise immunity. As functionality continues to be integrated onto systems-on-chips, analog circuits consume increasingly more power than digital circuits and the objective of this Dissertation is to explore low power techniques in the context of both digital and analog circuits residing on the same silicon real estate.

As natural signals are in analog form, a necessity exists to convert these into digital form and then back again in order to exploit the …

Spectral Radiation Analysis Of Premixed Oxy-Syngas And Oxy-Methane Flames, Naznin Jahan Afrose

Open Access Theses & Dissertations

Oxy-fuel combustion has potential to be an impeccable enhancement of current combustion techniques. For a hydrocarbon burning with oxygen the resulting exhaust stream is composed mainly of carbon dioxide and water vapor. This exhaust allows for easier carbon capture and sequestration since the water can be condensed out. Another advantage is the significant reduction of NOx since much of the nitrogen found in air-combustion systems is eliminated. These processes also provide a higher theoretical efficiency which is advantageous. Although beneficial many of the exhaust gas products radiative characteristics are unknown. Motivated by this, this paper focuses on the spectral radiation …

Hydrodynamic Cavitation As A Method For Cell Disruption, Christopher Caviglia

Open Access Theses & Dissertations

Development of new renewable technologies is an important driver in the scientific community.

As atmospheric carbon dioxide levels increase and the dependence on a finite amount of fossil fuel remains, the need for sustainable forms of energy is ever growing. Research in the field of renewable biofuels has pointed researchers toward the naturally occurring, robust, lipid- producing microorganism; microalgae. Its ability to sequester carbon and yield high lipid production has made it very attractive to renewable research. It has the potential to produce up to 10 times the oil, per acre, than competing biofuel feedstocks. However, an energy efficient method …

Design And Analysis Of A Novel Latch System Implementing Fiber-Reinforced Composite Materials, Francisco Guevara

Open Access Theses & Dissertations

The use of fiber-reinforced composite materials have increased in the last four decades in high technology applications due to their exceptional mechanical properties and low weight. In the automotive industry carbon fiber have become popular exclusively in luxury cars because of its high cost. However, Carbon-glass hybrid composites offer an effective alternative to designers to implement fiber-reinforced composites into several conventional applications without a considerable price increase maintaining most of their mechanical properties. A door latch system is a complex mechanism that is under high loading conditions during car accidents such as side impacts and rollovers. Therefore, the Department of …

Novel Engineered Nanomaterials For Water Remediation And Gas Adsorption: Graphene Oxide And Carbon Nanotubes Decorated With Metal-Organic Frameworks And Magnetic Nanoparticles, Vahid Jabbari

Open Access Theses & Dissertations

In the current study, a series of novel magnetic and non-magnetic hybrid nanocomposites based on metal-organic frameworks (MOFs) of M3(BTC)2 (M: Ni, Cu, Zn, and Cd), graphene oxide (GrO), and carbon nanotubes (CNTs), and Fe3O4 magnetic nanoparticles (MNPs) were developed via a green, simple and versatile solvothermal method at which GrO and CNT were used as platform to grow the MOFs and Fe3O4 MNPs over them. The as-synthesized nanocomposites were characterized by XRD, SEM, TEM, XPS, IR, Raman, TGA, and N2 adsorption/desorption isotherms. Morphological analysis confirmed successful growth of nano-size Fe3O4 MNPs and M3(BTC)2 MOFs over GrO and CNT platforms. …

A Cell Formation Algorithm For Sequential Processes With Alternative Machine Selection In The Automotive Lighting Industry, Victor Manuel Loya Garnica

Open Access Theses & Dissertations

At the present time, there are more than 12 big companies dedicated to design and produce OEM lighting systems for cars and trucks. The manufacturing processes for headlamps, tail lamps and any other exterior vehicle lighting are very common in the auto industry. Still, every automotive lamp assembly is different from brand to brand and even between the different vehicle models. Indeed, there are car headlamps with less than 30 sub-components and others with up to 300 elements. This implies creating diverse part numbers which share or hold varying manufacturing methods within a specific facility. Management of the plant resources …

E-Quality Design Of Experiments For Structural Electronics, Oscar Murga

Open Access Theses & Dissertations

Additive Manufacturing (AM) is a technology utilized for creating complex parts by adding layers of material in order to create a three dimensional functional part. This technology has been pushed to a new level of functionality where mechanical parts are combined with electronic components to create Three-Dimensional Structural Electronics (3DSE) systems. This new technology has been used to replace Printed Circuit Boards (PCB), for 3D SE are light weight and can be created in any desired shape. Computer Aided Design (CAD) software is used to design the part and a Fused Deposition Modeling (FDM) machine is used to 3D print …

A Methodology For Use Of Digital Image Correlation For Hot Mix Asphalt Testing, Estefany Ramos

Open Access Theses & Dissertations

Digital Image Correlation (DIC) is a relatively new technology which aids in the measurement of material properties without the need for installation of sensors. DIC is a noncontact measuring technique that requires the specimen to be marked with a random speckled pattern and to be photographed during the test. The photographs are then post-processed based on the location of the pattern throughout the test. DIC can aid in calculating properties that would otherwise be too difficult even with other measuring instruments.

The objective of this Thesis is to discuss the methodology and validate the use of DIC in different hot …

A Rapid Approach For Considering Nonlinear Response Of Flexible Pavements Under Fwd And Estimation Of Remaining Lives Of Pavements, Shahabaldin Shirazi

Open Access Theses & Dissertations

Most mechanistic empirical pavement analyses are based on the layered elastic models where the stress sensitivity of geomaterials and their nonlinearity are either ignored or accounted for indirectly. Advanced numerical models, such as finite element models, are required to consider the nonlinear nature of the geomaterials. Existing pavements are often tested with the Falling Weight Deflectometer (FWD) to estimate the input moduli to the layered elastic models in order to estimate remaining life and structural capacity of pavements. It has been more than 30 years that FWD tests are being performed to measure structural adequacy of pavements. Backcalculation is the …

Acoustic Emission Characteristics Of Damage Accumulation In Kevlar® 49 Composites, Eduardo Andrade

Open Access Theses & Dissertations

Acoustic emission (AE) data attained during tensile testing of epoxy impregnated Kevlar® 49 (K/Ep) composite strands were reduced and analyzed to monitor progressive damage accumulation during the approach to tensile failure. The K/Ep material tested in this study was chosen due to its similarity to the material-of-construction used in composite overwrapped pressure vessels (COPVs) used on the NASA Space Shuttle Orbiter. Insight into the progressive microstructural degradation of K/Ep strands was gained by monitoring AE event rate and energy. Source location based on energy attenuation and arrival time data was used to differentiate between significant AE attributable to microstructural damage …

Evaluating Methods Of Field-Based 3d Visualization And Their Application To Mapping Metamorphic Terranes: An Example From The Panamint Mountains, California, Jade Ashley Brush

Open Access Theses & Dissertations

Field geology has traditionally relied on 2D, paper-based workflows, but digital mapping techniques are rapidly replacing these outdated methods because they allow for more efficient and accurate mapping. This research applies digital mapping techniques and two terrestrially-based 3D visualization technologies, photogrammetry and Light Detection and Ranging (LiDAR), to the study of metamorphic terranes in the Panamint Mountains, California. This study reports on the spatial accuracy of TINs (triangulated irregular networks) generated from both photogrammetry and ground-based LiDAR using a terrestrial laser scanner (TLS) and discusses how spatial accuracy can be increased. Two levels of comparison were used to test spatial …