Engineering Commons^™

Robust And Real-Time Stereo Matching On Parallel Graphics Hardware Using Gradient-Based Disparity Refinement, Jedrzej Kowalczuk

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Computer vision attempts to provide camera-equipped machines with visual perception, i.e., the capability to comprehend their surroundings through the analysis and understanding of images. The ability to perceive depth is a vital component of visual perception that enables machines to interpret the three-dimensional structure of their surroundings and allows them to navigate through the environment. In computer vision, depth perception is achieved via stereo matching, a process that identifies correspondences between pixels in images acquired using a pair of horizontally offset cameras. It is possible to calculate depths from correspondences or, more specifically, the positional offsets (disparities) between pixels in …

Best Practices For Winter Maintenance Roadway Deicer Applications In The State Of Nebraska, Tregan P. D. Albers Ii

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The cost of deicing chemicals is a significant part of the Nebraska Department of Road’s winter maintenance budget. The objectives of this research are to review literature to determine current winter maintenance practices, analyze and present information gathered in a survey of winter maintenance professionals across Nebraska, and correlate this information with data obtained via MDSS (Maintenance Decision Support System) software to determine current practices being used in the state of Nebraska. Best practices for winter maintenance deicer applications for rural city and county officials in Nebraska are recommended. An explanation of the development of the survey that winter maintenance …

Microstructure And Phase Analysis In Mn–Al And Zr–Co Permanent Magnets, Michael J. Lucis

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In America’s search for energy independence, the development of rare-earth free permanent magnets is one hurdle that still stands in the way. Permanent magnet motors provide a higher efficiency than induction motors in applications such as hybrid vehicles and wind turbines. This thesis investigates the ability of two materials, Mn-Al and Zr-Co, to fill this need for a permanent magnet material whose components are readily available within the U.S. and whose supply chain is more stable than that of the rare-earth materials. This thesis focuses on the creation and optimization of these two materials to later be used as the …

Design Refinement By Iterative Virtual Experimentation (D.R.I.V.E.): A Methodology To Solving Engineering Design Problems, Charles M. Watson

Morehead State Theses and Dissertations

A Thesis Presented to the Faculty of the College of Science & Technology Morehead State University in Partial Fulfillment of the requirements for the Degree Master of Science by Charles M. “Matt” Watson on April 25, 2015

The Development Of Key Performance Indicators To Monitor Early Facilities Management Performance Through The Use Of Bim Technologies In Public Sector Projects, Barry Mcauley, Alan Hore, Roger West

Conference papers

One of the biggest threats faced by governments in delivering greater efficiency on public works is the need for the public sector to have an enhanced physical environment to operate from. The physical environment can either enhance or impede worker productivity, therefore contributing to its bottom line profits and success of the organisation. This has now resulted in the AEC sector witnessing the development and adoption of Building Information Modelling (BIM), so as to ensure a new level of functionality for the management of buildings. Despite enhanced Facilities Management (FM) being the goal of BIM, there is still reluctance and …

Investigations Of Synthetic Fuels: S8 And Sasol Ipk To Determine The Possibility Of Alternate Fuels In The Aerospace Industry, Scott M. Dyke

GS4 Student Scholars Symposium

Investigations of Synthetic Fuels: S8 and Sasol IPK to Determine the Possibility of Operation as Alternate Fuels in the Aerospace Industry

Name: Scott Dyke

Co-Authors: Martin Muinos, Julia Heimberger, Dr. Valentin Soloiu,

An ever-growing society that becomes more and more dependent on a finite energy source will eventually exceed its supply. Fossil fuel quantities are continuously decreasing and new solutions are needed. According to the United States Department of Transportation, over 10 billion gallons of airline fuels have been consumed in each of the past 15 years with some years over 13 billion gallons. In the meantime, fuel costs have …

Electrospinning Of Polycaprolactone Core-Shell Nanofibers With Anti-Cancer Drug, Sakib Iqbal, Mujibur Khan, Saheem Absar, Andrew Diamanduros, Samuel Chambers

GS4 Student Scholars Symposium

Encapsulation of a model anti-cancer drug, 5-Fluorouracul (5-FU) into biocompatible core-shell nanofibers of polycaprolactone (PCL) nanofibers was fabricated using a coaxial electrospinning process. Our work aims to solve these issues using a novel method of fabrication of fibers featuring confinement of drugs within a biodegradable core-shell structure, thereby permitting sustained release of drugs to specific sites of treatment, such as tissues affected with tumor cells. The coaxial electrospinning was performed using a sheath polymer solution consisting of a 14 wt% PCL solution and a 5 wt% solution of 5-FU as the core solution. Dimethylformamide (DMF) was used as the solvent …

Design And Implementation Of An Interactive Animatronic System For Guest Response Analysis, Brian Burns

GS4 Student Scholars Symposium

For nearly half a century, animatronic figures have provided entertainment in the theme park industry by simulating life-like animations and sounds. These figures enhance the storytelling experience by stimulating visual and audio senses among guests. Animatronics must be identified as human partners to establish status for dynamic interactions for enhanced acceptance and effectiveness as socially-interactive agents. An animatronic dragon, Kronos, has been designed, fabricated and implemented with human-identification sensors. The primary sensor input comes from an infrared camera, the PrimeSense Carmine, and includes an Arduino Mega 2560 as the center of control. Using the data from the depth camera, people …

Crystal Nucleation Of Palladium-Doped Lithium Disilicate Glass, Gregory Humble

Symposium of Student Scholars

The effect of concentration of palladium particles on crystal nucleation was investigated for lithium disilicate glass. The heterogeneous nucleation rate for 470°C and 480°C were calculated for a concentration of 0.001% palladium by weight. The DTA method of measuring nucleation and crystallization was used in this calculation.

Design And Analysis Of A Labview And Arduino-Based Automatic Solar Tracking System, Caiwen Ding

Morehead State Theses and Dissertations

A Thesis Presented to the Faculty of the College of Science and Technology Morehead State University in Partial Fulfillment of the requirements for the Degree Master of Science by Caiwen Ding April 24, 2015

The Development Of A Workplace Resilience Instrument, Larry Mallak

Faculty Research and Creative Activities Award (FRACAA)

The Workplace Resilience Instrument (WRI) has the potential to provide organizations and managers a useful tool for improving workplace resilience and helping employees achieve their potential.

The Effects Of Light Exposure On Flight Crew Alertness Levels, Lori Brown

Faculty Research and Creative Activities Award (FRACAA)

Fatigue is a threat to aviation safety because of the impairments in alertness and performance it creates. One in five pilots admits that they have made a serious error and say that they have had a "near miss" due to sleepiness, and limited effective fatigue countermeasures available in the operational setting. A review of literature and results of this study show the acute alerting effect of blue light to be a potentially useful countermeasure to reduce physiological, perceived, and cognitive fatigue, where conditions allow its use.

Simulation Of Deformation Of Red Blood Cells, Tai-Hsien Wu

Research and Creative Activities Poster Day

Using simulation to discuss the deformation of cells is not only efficient, but also inexpensive. In this study, a red blood cell (RBC) model is introduced which is simple but rigorous. This RBC model has been stretched to examine its properties and its results agree well with an experiment which was conducted in 2003. Therefore, the model allows researchers to conduct studies related to deformation of RBCs or investigate properties of RBCs. Based on this RBC model, we can couple it with the computational fluid dynamics to investigate the interaction between cells and flows, as well as mimic other cells …

Simulation Of Complex Ionic Liquid Ionization Process, Forrest Grady Kidd Iii

Research and Creative Activities Poster Day

The future of satellites will require dual-mode propulsion to obtain dynamic orbits. One set of propellants capable of dual-mode propulsion are ionic liquids. These energy-dense liquids have similar thrust characteristics to SOTA monopropellants and low vapor pressures making them safer to handle. That low vapor pressure makes ionization more difficult as it requires the propellant to be in a gaseous state. This requires experiments to determine how to efficently vaporize and ionize this propellant. Computational modelling is needed to guide these experiments and to develop simulations that can extrapolate the data to more complex geometries.

Conceptual Development Of An Impact-Attenuation System For Intersecting Roadways, Joseph G. Putjenter

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Longitudinal barriers are commonly used to shield hazards, including stiff bridge rail ends and slopes. In some locations, a secondary roadway intersects the primary roadway within the guardrail’s length-of-need (LON). Some intersections have as little as 15 ft (4.6 m) between the intersection and beginning of the bridge railing, which require short-radius guardrail systems. No short-radius systems have been tested and approved to current impact safety standards for shielding hazards with these conditions.

Site conditions provided by the Nebraska Department of Roads were used to determine the constraints for a new safety treatment for intersecting roadways and include intersection radii, …

Living On Highways, Alexa Dicken

Binghamton University Undergraduate Journal

“Living on Highways” is a selection comprised of ten poems from my honors thesis. The poems focus on nature and views of human reality in the context of nature, two subjects that require attention to sustainability. I find my strongest inspiration in experiences of interaction with nature, simply being outside and observing the relationship between people and nature. Written in the environmental literary tradition of poets such as Billy Collins and Emily Dickinson, “Living on Highways” situates its poems within the context of nature but comes with a focused regard on humanity’s responsibility toward the appreciation of the environment and …

Model-Based Condition Monitoring And Power Management For Rechargeable Electrochemical Batteries, Taesic Kim

School of Computing: Dissertations, Theses, and Student Research

Rechargeable multicell batteries have been used in various electrical and electronic systems, e.g., renewable energy systems, electric-drive vehicles, commercial electronics, etc. However, there are still concerns about the reliability and performance degradation of rechargeable batteries caused by low thermal stability and the aging process. A properly designed battery management system (BMS) is required for condition monitoring and control of multicell batteries to ensure their safety, reliability, and optimal performance. The goal of this dissertation research was to develop a novel BMS for rechargeable multicell batteries.

First, this research developed high-fidelity battery models for online condition monitoring and power management of …

Echo Cancellation For Bone Conduction Transducers, Mohammadhossein Behgam, Steven L. Grant

Electrical and Computer Engineering Faculty Research & Creative Works

Bone conducting transducers are attractive technologies for voice communication systems. Bone vibrators (BVs), typically located on the condyle bone, allow users to listen while leaving their outer ears open, enhancing situational awareness. Meanwhile, bone conduction microphones (BCMs), often located on the temple, increase the transmitted signal to noise ratio because they are relatively insensitive to ambient air born environmental noise. A communication headset consisting of a BV and a BCM is a natural combination of these promising technologies. The prospect of acoustic coupling between the BVs and BCMs results in acoustic echo if full-duplex communication is used. To our knowledge, …

Performance Study Of A Mems Low-Noise Sound Pressure Gradient Microphone Under An Ac Bias, Jonathan Michelson

Binghamton University Undergraduate Journal

An AC bias was introduced into microelectromechanical system (MEMS) low-noise sound pressure gradient microphone by Miles, Cui, Su and Hormentcovschi (2014), and its implications for the device's noise performance and directivity readings are discussed. The schematic involved demodulation of the microphone output with external circuitry, and subsequent computer software analysis of the microphone and circuitry outputs. Although insights into noise improvement were frustrated due to subpar noisy components used in the demodulation circuitry, the simultaneous measuring of the microphone's varying directivity patterns was shown to be achievable with this AC bias scheme.

Orgin Of Subgap Features In Transparent Amorphous Oxide Semiconductors, Zachary Lebens-Higgins, Anne Dailey, Louis Piper

Binghamton University Undergraduate Journal

Amorphous indium gallium zinc oxide (a-IGZO) is a transparent amorphous oxide semiconductor (TAOS) that has shown promise as transparent thin film transistors (TTFTs) in various display applications. Within a-IGZO films, states can form in the band gap that hinder TTFT performance. In order to elucidate the origin of these states, we examined the formation of the subgap states for a-IGZO thin films with various compositions. We observed a positive correlation between the subgap formation and the percentage of oxygen ruling out oxygen deficiencies as a factor in the formation of subgap states. Furthermore, metallic indium crystallites were observed to form …

The Economic Payoff Of Party Membership In China, Kevin Acker

Binghamton University Undergraduate Journal

Because political party membership could potentially confer large economic benefits, economists have increasingly turned their attention to the role of political and social status in one’s life. The Chinese Communist party is the biggest political party in the world, and members are often motivated to join for economic reasons. Previous studies examine the relationship between Communist party membership and earnings and find positive correlation but this correlation may be partly or totally spurious, thereby generating upwards-biased estimates of the importance of political party membership – political party membership is likely to be correlated with a variety of other variables, which …

Residue, Donovan Borger

Binghamton University Undergraduate Journal

Residue is a flash fiction piece, exploring loss, specifically the loss of the protagonist’s sons and his teeth. To write this piece, I read a large number of anthologized flash fiction pieces written by contemporary authors including David Foster Wallace, Lydia Davis, Tobias Wolff, and George Saunders with the intent of understanding and reproducing their takes on the flash fiction form while adding my own nuances. For purposes of characterization and setting, I also researched logging done on the land of what is now Algonquin Park in Ontario. My research and writing show that flash fiction functions most effectively when …

Morality Of A Carbon Tax: Transition To A Sustainable Economy, Timothy Lamendola

Binghamton University Undergraduate Journal

A carbon tax is needed to address the negative externalities caused by carbon emissions. Increased carbon dioxide concentrations in the atmosphere have a direct and negative impact on net social benefit to current and future generations. Our current human population has a moral obligation to future generations and, therefore, is responsible for excess burning of fossil fuels. This essential carbon tax is needed to help wean humans off their fossil fuel reliance. One should not be concerned with the economic losses this could cause because an economy based off unlimited growth is unsustainable and must be altered. A new, sustainable …

Evaluating The Air Emissions From Solid Waste Refuse Trucks, Lauren D. Hauser

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The air emissions from solid waste refuse trucks is an issue that has not been widely studied, but is becoming an ever increasing issue. In the United States alone they have generated around 251 million tons of waste in 2012. This study in particular will collect data on 24 different refuse trucks (front-load, side-load, and roll-off, and diesel and compressed natural gas fuel) while on real-life routes in the Raleigh, North Carolina area. The collected data will then be aggregated and summarized based on the type of trucks. A regression analysis will also be done to determine the relationship between …

A Kalman Filter For Stereophonic Acoustic Echo Cancellation, Constantin Paleologu, Jacob Benesty, Steven L. Grant, Silviu Ciochina

Electrical and Computer Engineering Faculty Research & Creative Works

The stereophonic acoustic echo cancellation (SAEC) scheme was recently recast by using the widely linear (WL) model, i.e., as a single-input/single-output system with complex random variables. In this paper, we present a Kalman filter with individual control factors in the context of the WL model for SAEC. As a specific feature, this algorithm uses a different level of uncertainty for each coefficient of the filter. Simulation results indicate that the proposed algorithm outperforms the recursive least-squares (RLS) algorithm, which is usually considered as the benchmark for SAEC.

Unstandard Cubesat/Pocketqube/Tubesat Deployers, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Unstandard CubeSat/PocketQube/TubeSat Deployers" from April 23, 2015.

Webinar: Impacts Of Roadway And Traffic Characteristics On Air Pollution Risks For Bicyclists, Alexander Y. Bigazzi

TREC Webinar Series

Active travel such as walking and bicycling can lead to health benefits through an increase in physical activity. At the same time, more active travelers breath more and so can experience high pollution inhalation rates during travel. This webinar will review the state of knowledge about how roadway and traffic characteristics impact air pollution risks for bicyclists, including the latest PSU research quantifying bicyclists' uptake of traffic-related air pollution using on-road measurements in Portland. The PSU research team including Alex Bigazzi, Jim Pankow, and Miguel Figliozzi quantified bicyclist exposure concentrations on different types of roadways, respiration responses to exertion level, …

A Finite Element Method Based Microwave Heat Transfer Modeling Of Frozen Multi-Component Foods, Krishnamoorthy Pitchai

Department of Food Science and Technology: Dissertations, Theses, and Student Research

Microwave heating is fast and convenient, but is highly non-uniform. Non-uniform heating in microwave cooking affects not only food quality but also food safety. Most food industries develop microwavable food products based on “cook-and-look” approach. This approach is time-consuming, labor intensive and expensive and may not result in optimal food product design that assures food safety and quality. Design of microwavable food can be realized through a simulation model which describes the physical mechanisms of microwave heating in mathematical expressions. The objective of this study was to develop a microwave heat transfer model to predict spatial and temporal profiles of …

F-35 And Military Spending, Colin J. Charpentier

Celebrating Scholarship & Creativity Day (2011-2017)

How does the F-35 Lightning II multirole fighter compare to current military airplanes in terms of costs and capabilities? This is a comparison study based around the F-35 and five other planes. The F-35 is chosen because of its status as an ongoing project and due to its controversy as a plane. This study looks at all values. It is completely numeric based allowing for objective analysis. These planes chosen for study are the F-16 C/D, F/A-18 E/F, F-22A, AV-8B Harrier II, and A-10C. These planes are chosen because the F-35 is meant to replace them in the case of …

Descriptive Statistical Analysis Of Oshpd Quality Inspections On California Hospital Projects, Philip L. Barlow

Construction Management

California hospital construction projects are large, complex, and extremely difficult projects to execute and navigate successfully. One of the primary reasons for this is the OSHPD permit, review, and inspection process. The quality control rigor imposed by this third party inspection procedure has caused great angst amongst most general contractors and subcontractors. This study examined over 60,000 OSHPD inspections, spanning six California hospital projects and forty-one separate subcontractors. Specifically, this paper conducts descriptive statistical analysis on the total number of inspections conducted and the percentage of failed inspections (or re-inspections) that occurred. The analysis, conducted on major subcontractors working on …