Engineering Commons^™

Hybrid Rocket Motor Scaling Process, Joseph B. R. Vanherweg

Master's Theses

Hybrid rocket propulsion technology shows promise for the next generation of sounding rockets and small launch vehicles. This paper seeks to provide details on the process of developing hybrid propulsion systems to the academic and amateur rocket communities to assist in future research and development. Scaling hybrid rocket motors for use in sounding rockets has been a challenge due to the inadequacies in traditional boundary layer analysis. Similarity scaling is an amendment to traditional boundary layer analysis which is helpful in removing some of the past scaling challenges. Maintaining geometric similarity, oxidizer and fuel similarity and mass flow rate to …

Telepresence: Design, Implementation And Study Of An Hmd-Controlled Avatar With A Mechatronic Approach, Darren Michael Chan

Master's Theses

Telepresence describes technologies that allow users to remotely experience the sensation of being present at an event without being physically present. An avatar exists to represent the user whilst in a remote location and is tasked to collect stimuli from its immediate surroundings to be delivered to the user for consumption. With the advent of recent developments in Virtual Reality technology, viz., head-mounted displays (HMDs), new possibilities have been enabled in the field of Telepresence. The main focus of this thesis is to develop a solution for visual Telepresence, where an HMD is used to control the direction of a …

Using Archived Transit Data To Analyze The Effect Of Rainfall On Transit Performance Measures At The Route Level, Nicholas F. Bleich

Master's Theses

This study investigates the effect of rainfall on transit performance measures at the route level in the Puget Sound region of Washington State. Transit agencies are required to report certain performance metrics to the Federal Transit Administration (FTA), but performance measures can also be used to evaluate service and provide customers with information regarding the transit system. Using a three-year sample of archived automatic vehicle location (AVL) and hydrologic data the relationships between ridership, travel time, delay, and rainfall were investigated. The analysis of daily ridership and rainfall resulted in no statistically significant results, however, the results are supported by …

Effect Of Surfactant Architecture On Conformational Transitions Of Conjugated Polyelectrolytes, Greg A. Braggin

Master's Theses

Water soluble conjugated polyelectrolytes (CPEs), which fall under the category of conductive polymers, possess numerous advantages over other conductive materials for the fabrication of electronic devices. Namely, the processing of water soluble conjugated polyelectrolytes into thin film electronic devices is much less costly as compared to the processing of inorganic materials. Moreover, the handling of conjugated polyelectrolytes can be performed in a much more environmentally friendly manner than in the processing of other conjugated polymers because conjugated polyelectrolytes are water soluble, whereas other polymers will only dissolve in toxic organic solvents. The processing of electronic devices containing inorganic constituents such …

Criticality And Risk Assessment For Pipe Rehabilitation In The City Of Santa Barbara Sewer System, Rossi Carmelo Rossi Ii

Master's Theses

Aging sewer infrastructure is posing greater and greater risk to the health and well-being of City residents. Issues can range from pipe blockages in sewer laterals to Sanitary Sewer Overflows. This thesis develops a risk analysis method that can be used by municipalities to maintain and rehabilitate sewer assets. Risk combines the effect of Likelihood of Failure (LOF) and Consequence of Failure (COF) to perform a complete two-dimensional analysis that allows for relative comparison between different pipes in the system. The LOF rating has been equated to pipe integrity while the COF rating was related to the environmental, economic, and …

Ir-Depth Face Detection And Lip Localization Using Kinect V2, Katherine Kayan Fong

Master's Theses

Face recognition and lip localization are two main building blocks in the development of audio visual automatic speech recognition systems (AV-ASR). In many earlier works, face recognition and lip localization were conducted in uniform lighting conditions with simple backgrounds. However, such conditions are seldom the case in real world applications. In this paper, we present an approach to face recognition and lip localization that is invariant to lighting conditions. This is done by employing infrared and depth images captured by the Kinect V2 device. First we present the use of infrared images for face detection. Second, we use the face’s …

Micro Electrostatic Actuation Of A Silicon Diaphragm, Matthew W. Samples

Master's Theses

There are a number of applications, from hearing aids to microfluidic pumps, which utilize micro-scale actuating diaphragms. These MEMS (micro-electromechanical system) devices can be actuated by electrostatic forces, which utilize an induced electric field to pull two charged plates towards one another. Such devices were fabricated and electrostatic actuation of the diaphragms was performed to analyze its viability as a micro-speaker. The long-term performance of such products requires adequate diaphragm deflection to create audible pressure waves with relatively low maximum stresses to ensure a high cycle fatigue life. With these requirements, initial calculations and FEA (finite element analysis) were performed …

Development Of Electronics, Software, And Graphical User Control Interface For A Wall-Climbing Robot, Lynda Beatriz Tesillo

Master's Theses

The objective for this project is to investigate various electrical and software means of control to support and advance the development of a novel vacuum adhesion system for a wall-climbing robot. The design and implementation of custom electronics and a wirelessly controlled real-time software system used to define and support the functionalities of these electronics is discussed. The testing and evaluation of the overall system performance and the performance of the several different subsystems developed, while working both individually and cooperatively within the system, is also demonstrated.

Treatment Of Petroleum Hydrocarbons In Oil-Based Drill Cutting Mud Using Biowish Bioaugmentation Products, Diego Jose Cardenas Zepeda

Master's Theses

The efficacy of BiOWiSHTM-Thai Aqua, a commercially discontinued microbial product, in remediating oil based drill-cutting mud (DCM) was researched in this study. Experimentation was performed directly on DCM and on sand contaminated with oil extracted from DCM. A gas chromatograph-mass spectrometrer and a respirometer were used for analysis of total petroleum hydrocarbons (TPH) and CO2 production respectively. Five experiments were analyzed by TPH extraction and analysis; four experiments were analyzed by respirometric analysis. The specific microcosm conditions tested in the experiments were control, nutrient-only control, and bioaugmentation product.

This study concluded that there might be potential for bioaugmentation of TPH …

A Finite Element Analysis On The Viscoelasticity Of Postmenopausal Compact Bone Utilizing A Complex Collagen D-Spacing Model, Austin C. Cummings

Master's Theses

The nanoscale dimension known as D-spacing describes the staggering of collagen molecules, which are fundamental to the biphasic makeup of bone tissue. This dimension was long assumed to be constant, but recent studies have shown that the periodicity of collagen is variable. Given that the arrangement of collagen molecules is closely related to the degree of bone mineralization, recent studies have begun to look at D-spacing as a potential factor in the ongoing effort to battle postmenopausal osteoporosis. The theoretical models presented by previous studies have only opted to model a single collagen-hydroxyapatite period, so the creation of an intricate …

Characterization Of Two Vernier-Tuned Distributed Bragg Reflector (Vt-Dbr) Lasers Used In Swept Source Optical Coherence Tomography (Ss-Oct), Greg M. Bergdoll

Master's Theses

Insight Photonic Solutions Inc. has continued to develop their patented VT-DBR laser design; these wavelength tunable lasers promise marked image-quality and acquisition time improvements in SS-OCT applications.

To be well suited for SS-OCT, tunable lasers must be capable of producing a highly linear wavelength sweep across a tuning range well-matched to the medium being imaged; many different tunable lasers used in SS-OCT are compared to identify the optimal solution.

This work electrically and spectrally characterizes two completely new all-semiconductor VT-DBR designs to compare, as well. The Neptune VT-DBR, an O-band laser, operates around the 1310 nm range and is a …

Stability Analysis Of Negative Resistance-Based Source Combining Power Amplifiers, Hannah S. Homer

Master's Theses

An investigation into the stability of negative resistance-based source combining power amplifiers is conducted in this thesis. Two different negative resistance-based source combining topologies, a series and parallel version, are considered. Stability is analyzed using a simple and intuitive broadband approach that leverages linear circuit stability criterion and two different linearization methods: linearization around the operating point and in the frequency domain. Using this strategy, it is shown that conditions for self-sustained oscillation exist for both topologies. For the series combining topology, self-sustained oscillation is prevented by means of injection locking.

Development And Validation Of A Tibiofemoral Joint Finite Element Model And Subsequent Gait Analysis Of Intact Acl And Acl Deficient Individuals, Nicholas Czapla

Master's Theses

Osteoarthritis (OA) is a degenerative condition of articular cartilage that affects more than 25 million people in the US. Joint injuries, like anterior cruciate ligament (ACL) tears, can lead to OA due to a change in articular cartilage loading. Gait analysis combined with knee joint finite element modeling (FEM) has been used to predict the articular cartilage loading. To predict the change of articular cartilage loading during gait due to various ACL injuries, a tibiofemoral FEM was developed from magnetic resonance images (MRIs) of a 33 year male, with no prior history of knee injuries. The FEM was validated for …

Nanofiber-Based Membrane Separators For Lithium-Ion Batteries, Mataz Alcoutlabi, Hun Lee, Xiangwu Zhang

Mechanical Engineering Faculty Publications

Nanofiber-based membranes were prepared by two different methods for use as separators for Lithium-ion batteries (LIBs). In the first method, Electrospinning was used for the fabrication of Polyvinylidene fluoride PVDF nanofiber coatings on polyolefin microporous membrane separators to improve their electrolyte uptake and electrochemical performance. The nanofiber-coated membrane separators show better electrolyte uptake and ionic conductivity than that for the uncoated membranes. In the second method, Forcespinning® (FS) was used to fabricate fibrous cellulose membranes as separators for LIBs. The cellulose fibrous membranes were made by the Forcespinning® of a cellulose acetate solution precursor followed by a subsequent alkaline hydrolysis …

Global Technology Experiences For Upper-Division Engineering Students: An Assessment, Patricia Backer, Wenchiang Chung

Faculty Publications

In order for students to thrive in the highly competitive global economy, it is critical for them to develop international perspectives and appreciation. As a result, in 2004, the San Jose State University’s Charles W. Davidson College of Engineering established a one-million-dollar Global Technology Initiative (GTI) program. The mission of the GTI program is to expand students’ horizons about the opportunities and challenges of a global economy, to expose them to global, environmental, and energy problems in which technology plays a central role, to motivate their learning of global issues and different cultures, and to introduce them to a more …

Beverage Dispensing Backpack Design And Business Plan, Sterling Blake Grande

Biomedical Engineering

Grande Beverage Equipment

Mission Statement:

To deliver beverage dispensing products, services, and solutions to our customers in innovative and cost effective ways.

Product:

We provide portable beverage dispensing backpacks that can deliver soda or beer from pressurized tanks.

Self-Contained Breathing Apparatus For Firefighter With A Permanent Stoma, Jason Delgadillo, Aaron Wheeler, Zachary Wishbow

Biomedical Engineering

The purpose of this project was to create a unique SCBA (self-contained breathing apparatus) for a firefighter named Chris Gauer. This prototype consists of a SCBA headgear connected to a polycarbonate-formed stoma mask with a medical-grade sanitary silicone hose.

Sense And Avoid Uas Project Final Design Report, Katie Peticolas, Cesia Cazares, Trevor Elsbree, Courtney Smith, Herberth Elie Navas

Biomedical Engineering

No abstract provided.

Water And Energy Use And Wastewater Production In A Beef Packing Plant, Rami Ziara

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Accurate information about water and energy use and wastewater production in beef packing plants is scarce. The objective of this study was to collect baseline water and energy use data within a beef packing plant with a special focus on antimicrobial interventions and to collect preliminary wastewater production data in addition. Permanent and portable water flow meters were installed on the plant’s plumbing system to collect water flow data from March 2014 to March 2015. A local utility company was hired to meter electricity at antimicrobial interventions using portable data loggers. Metered water flows and temperatures were combined with fundamental …

Work-In-Progress: Statistics Components In A Circuits Laboratory For Ece Sophomores, Steve Eugene Watkins, Theresa M. Swift, Amardeep Kaur

Electrical and Computer Engineering Faculty Research & Creative Works

Statistics concepts are required for undergraduate curricula in electrical engineering and computer engineering (ECE). Accreditation guidelines specify that such instruction must include “applications appropriate to the program name” [ABET Criteria for Accrediting Engineering Programs, 2014-2015]. Curricula content in probability and statistics are commonly done in a stand-alone course, but additional exposure within engineering-content courses can provide great value. Many basic concepts can be introduced before the comprehensive stand-alone course. A good ECE context is an electrical circuits laboratory in which students need to understand electrical component tolerances and related design issues. Statistics-related assignments in a required, sophomore-level laboratory course are …

Relating The Experimental Ionization Coefficients In Semiconductors To The Nonlocal Ionization Coefficients, Jeng Shiuh Cheong, Majeed M. Hayat, Xinxin Zhou, John P.R. David

Electrical and Computer Engineering Faculty Research and Publications

The experimentally determined impact ionization coefficients, , include intrinsically the presence of a dead-space, where carriers cannot impact ionize as they do not have sufficient energy. These, therefore, cannot be used by nonlocal ionization models, which require the enabled ionization coefficients, which describe the ionization probability after the dead-space. A relatively simple relationship is shown to exist between α'(β') and , which requires only the knowledge of the carrier threshold energies. This allows conventionally limited to the local model framework, to be used to give a very good prediction of the avalanche multiplication and excess noise for a wide range …

Investigation Of The Surface Adhesion Phenomena And Mechanism Of Gold-Plated Contacts At Superlow Making/Breaking Speed, Wanbin Ren, Cheng Chang, Yu Chen, Shengjun Xue, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

Surface adhesion phenomena of gold-plated copper contact materials are studied in conditions of nonarc load (5/15/25 V and 0.2/0.5/1 A) and superlow speed (25 and 50 nm/s) realized by a piezoactuator during the making and breaking processes. It is shown that softening and melting of local asperities leads to interface adhesion, which results from the joule heat generated by the contact resistance; it is determined that the change of contact force with time obeys the negative exponential distribution and the time constant is associated with the adhesion force directly. Based on the fitting experimental data, the relationship between the adhesion …

A Study Of Carbon Infiltrated Carbon Nanotubes Fabricated On Convex Cylindrical Substrates For The Creation Of A Coronary Stent, Warren Beecroft Robison

Theses and Dissertations

This research explores the minimizing of cracks in the fabrication of carbon-infiltrated carbon nanotube (CI-CNT) forests on cylindrical rods for the purposes of creating a CI-CNT coronary stent. It is a continuation of the work begun by Jones [1] and Skousen [2] whose work included the creation of a feasible CI-CNT coronary stent on a planar surface. The current research was performed in two parts: 1) growth on the whole circumference of the rod for ~20mm in length and 2) growth in lines and patterns. Experiments were done on either a 309 or 304 stainless steel rod ~3mm in diameter.The …

Distinctively Christian Engineering: Implementing Guiding Principles In Our Civil Curriculum, Joel K. Sikkema, Justin Vander Werff

Faculty Work Comprehensive List

At Dordt College, we work to make our motto, Soli Deo Gloria (glory to God alone), the organizing principle for all activities. In the Engineering Department, it is our responsibility to continue to shape our program to be holistic and Christ-centered in order to equip our students to serve the Lord obediently in engineering. To direct the development and modification of our engineering curriculum, we established a set of five distinctively Christian guiding principles for engineering. Setting the direction for this work required a grounding point. Therefore, in a subsequent manuscript we evaluated the extent to which these principles were …

Work-In-Progress: Enhancing Conceptual Understanding By Using A Real-Time Online Class Response System In Engineering Courses, Lulu Sun, Yan Tang

Publications

To engage students, and assess students’ understanding in real-time, Classroom Response Systems (CRS), have been increasingly used in many engineering classrooms. Previous research has shown that CRS can enhance students’ participation, promote active learning, and develop their critical thinking skills. It can also generate either neutral or positive learning outcomes depending on whether it is combined with other cooperative learning strategies. This paper presents a collaborative study on how to combine the implementation of a web-based CRS with class discussion to clarify student misconceptions in a freshman-level engineering graphics course, a sophomore-level dynamics course, and a senior-level control systems course …

Applying Second Language Acquisition To Facilitate A Blended Learning Of Programming Languages, Lulu Sun, Christina Frederick

Publications

This paper describes a recent NSF funded project under the Research Initiation Grant in Engineering Education (RIGEE) program. It correlates the programming language study to second language acquisition theory. The work begun in Fall 2014, and project materials are under development. This paper outlines the proposed work and the materials developed to support the implementation of the project in Fall 2015.

Cooling And Heating Season Impacts Of Right-Sizing Of Fixed- And Variable-Capacity Heat Pumps With Attic And Indoor Ductwork, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

The U.S. Department of Energy's research team Building America Partnership for Advanced Residential Construction implemented two phases of experiments to examine the cooling and heating seasonal and peak demand performance of a variable-capacity 2-ton SEER 22 heat pump versus a 3-ton variable-capacity SEER 21 heat pump with attic ducts and indoor ducts. The experiments also compared the cooling and heating seasonal and peak demand performance of 2-ton versus 3-ton fixed-capacity SEER 13 heat pumps with attic ducts and indoor ducts.

Implementation Of Traditional Printing Techniques For The Development Of Flexible Printed Sensors, Sai Guruva Reddy Avuthu

Dissertations

Printed electronics has gained a remarkable interest over the past decade for the fabrication of cost efficient electronic devices, with a major focus on the development of flexible sensors. This dissertation focuses on the fabrication of flexible sensors using traditional printing processes such as screen, inkjet and gravure printing.

A flexible organic thin film transistor (OTFT) was successfully fabricated on a polyethylene terephthalate (PET) substrate and employed as a humidity sensor. Aluminum gate electrode was thermally evaporated on PET and UV clear dielectric layer was spin coated. Source and drain silver interdigitated electrodes were screen printed. 6,13-bis(triisopropylsilylethynyl) pentacene, a humidity …

An Efficient Feature Descriptor And Its Real-Time Applications, Alok Desai

Theses and Dissertations

Finding salient features in an image, and matching them to their corresponding features in another image is an important step for many vision-based applications. Feature description plays an important role in the feature matching process. A robust feature descriptor must works with a number of image deformations and should be computationally efficient. For resource-limited systems, floating point and complex operations such as multiplication and square root are not desirable. This research first introduces a robust and efficient feature descriptor called PRObability (PRO) descriptor that meets these requirements without sacrificing matching accuracy. The PRO descriptor is further improved by incorporating only …

The Performance Of Structured High-Capacity Si Anodes For Lithium-Ion Batteries, Jui Chin Fan

Theses and Dissertations

This study sought to improve the performance of Si-based anodes through the use of hierarchically structured electrodes to provide the nanoscale framework needed to accommodate large volume changes while controlling the interfacial area – which affects solid-electrolyte interphase (SEI) formation. To accomplish this, electrodes were fabricated from vertically aligned carbon nanotubes (VACNT) infiltrated with silicon. On the nanoscale, these electrodes allowed us to adjust the surface area, tube diameter, and silicon layer thickness. On the micro-scale, we have the ability to control the electrode thickness and the incorporation of micro-sized features. Treatment of the interfacial area between the electrolyte and …