Engineering Commons^™

Cable-To-Post Attachments For Use In Non-Proprietary High-Tension Cable Median Barrier – Phase Ii, Scott K. Rosenbaugh, Robert W. Bielenberg, Brandt M. Humphrey, Ronald K. Faller, John D. Reid, Karla A. Lechtenberg

Nebraska Department of Transportation: Research Reports

The research objectives reported herein were based on further development of cable-to-post attachment hardware for use in the non-proprietary high-tension cable barrier system. Specifically, this project aimed to develop and evaluate alternative attachment designs for the bolted, tabbed bracket and evaluate the use of a larger diameter, keeper rod for use in the top cable attachment. From a group of over 25 alternative attachment concepts, two tabbed bracket designs were selected for evaluation through dynamic component testing: 1) the lateral shear plate attachment and 2) the drop-in shear plate attachment. The drop-in shear plate concept did not perform as intended, …

Sports For Nathan, Delaney Bales, Joseph Garrett, Chris Harter

Mechanical Engineering

Nathan Cooper is a local boy with spinal muscular atrophy. He enjoys playing games and being active. One assistive device that Nathan uses is his Standing Dani, a motorized mobile stander. Nathan enjoys playing golf and kickball, and prior to this project he had no way of playing golf and no safe way of playing kickball. The purpose of this project was to design and build a golf attachment for Nathan’s Standing Dani that allows him to putt, and a kickball attachment that allows him to play kickball safely. First, the design team researched and defined the problem in terms …

The Development Of A High-Performance Distributed Battery Management System For Large Lithium Ion Packs, Christopher B. Grasberger

Master's Theses

A high performance battery management system (BMS) for large capacity cells was designed, built, and tested in a cycle of three revisions. The BMS was designed for use in applications where the battery pack configuration is unknown: parallel, series, or any combination. Each of the cells is equipped with its own battery management system to allow a peer-to-peer mesh network to monitor the safety of the cell. The BMS attached to each cell also is equipped with a 25A DC/DC converter to perform active balancing between cells in a string. This converter can transfer charge to (or from) a cell …

Analysis Of A Carbon Fiber Reinforced Polymer Impact Attenuator For A Formula Sae Vehicle Using Finite Element Analysis, John T. Rappolt

Master's Theses

The Hashin failure criteria and damage evolution model for laminated fiber reinforced polymers are explored. A series of tensile coupon finite element analyses are run to characterize the variables in the physical model as well as modeling techniques for using an explicit dynamic solver for a quasi-static problem. An attempt to validate the model on an axial tube crush is presented. It was found that fiber buckling was not occurring at the impactor-tube interface. Results and speculation as to why the failure initiation is incorrect are discussed. Lessons learned from the tube crush are applied successfully to the quasi-static Formula …

Increasing Isentropic Efficiency With Hydrostatic Head And Venturi Ejection In A Rankine Power Cycle, Nathan Daniel Ruiz

Master's Theses

This thesis describes the modifications made to the Cal Poly Thermal Science Laboratory’s steam turbine experiment. While the use of superheating or reheating is commonly used to increase efficiency in a Rankine cycle the methods prove unfeasible in a small scale project. For this reason, a mathematical model and proof of concept design using hydrostatic head generated by elevation and venturi ejection for use by the condenser is developed along with the equations needed to predict the changes to the system. These equations were used to create software to predict efficiency as well as lay down the foundation for future …

Measuring The Influence That Components Have On Pedestrian Route Choice In Activated Alleys, Samuel Hirsher Gross

Master's Theses

This paper explores how cities have integrated formal planning into improving public space. Through a review of literature on the topic, this the paper identifies the potential design has to renovate narrow streets and alleys, within the public right of way. By preforming an assessment of plans and programs, this paper identifies the common themes or components that have been used by planners, architects, and engineers to improve the urban environment for pedestrians. Based on this information, a pilot study was created to measure the influence the most common components have on pedestrian route choice. The results are then compared …

Adaptive Automotive Lighting Systems, Marc W. Haeberlin

Master's Theses

Over the past few years, the use of LEDs within the automotive and avionic industries has increased due to their high efficiency, durability and wide range of light brightness. As the use of LEDs within these industries grows, a need for reliable, high performance drivers becomes more relevant. Companies are implementing LEDs for applications involving adaptive lighting or simple dimming features. This thesis shows implementation of various non-isolated analog converters integrated with digital dimmers to achieve these adaptive lighting systems. Adaptive lighting systems involve reading an input from an external source (brake pedal or steering wheel) and changing the brightness …

Performance Analysis Of Distance Relay On Shunt/Series Facts-Compensated Transmission Line, Ahmed Kareem Lafta Al-Behadili

Masters Theses

Flexible Alternating Current Transmission Systems (FACTS) are increasingly being used to enhance the efficiency and reliability of power system networks. FACTS devices can influence the performance of existing protective system components (specifically distance relays) due to the fact that FACTS change power system quantities such as line impedances, voltages, and currents. Distance relay may mal-operate when FACTS devices are connected since they cause some of the tripping characteristics to change. This thesis investigates the impact on distance relay performance due to compensations using two types of FACTS controllers: Static Synchronous Compensator (STATCOM) and Static Synchronous Series Compensator (SSSC). Analytical study …

Wind Oscillator For Power Genration, Rs Vewen Ramasamy

Masters Theses

This thesis describes in detail the design, mechanical, electrical and software considerations in developing a working model for the non-conventional wind power converter called Wind Oscillator. This was based on the concept developed and patented by Tianshu Liu in the paper “Wind Oscillator and Rotor for Power Generation”[1]. In order to verify the practicality of this idea, a working model of the Wind Oscillator was designed, built and tested in the Western Michigan University wind tunnel facility. LabVIEW data acquisition and photogrammetry was performed on the model so as to evaluate the power generated by the Wind Oscillator and to …

Fragility Assessment Of High-Rise Reinforced Concrete Buildings, Hezha Sadraddin

Masters Theses

This research presents a probabilistic seismic responses analysis of high-rise reinforced concrete (RC) buildings using fragility assessment method. Three RC buildings, having the same plan dimension and height (12 story each) but different in structural configurations, were designed and their seismic responses were compared. First building is a Moment Resisting Frame (MRF), second is a MRF with exterior shear walls, and the third building consists most shear walls. Buildings were designed for high-seismic activity zone (i.e. Los Anglos) using the Equivalent Lateral Force (ELF) for seismic loading calculation. Sixteen real ground motion pairs were selected and scaled, then applied orthogonally …

Post-Installed Fiber Optic Pressure Sensors On Subsea Production Risers For Severe Slugging Control, Ammon Eaton, Seyed M. Safdarnejad, John Hedengren, Kristi Moffat, Casey Hubbell, David Brower, Alexis Brower

Faculty Publications

Fiber optic sensors have gained increasing use in monitoring offshore structures. The sensors have successfully monitored flowlines, umbilicals, wells, Tension Leg Platform (TLP) tendons, production and drilling risers, and mooring lines. Fiber optic sensors are capable of monitoring strain, temperature, pressure, and vibration. While the success of fiber optic monitoring has been clearly demonstrated, the sensors are now under consideration for automation applications. This paper details the plausibility of using pressure measurements from post-installed fiber Bragg grating (FBG) sensors with Model Predictive Control (MPC) to suppress severe slugging in subsea risers. Prior control schemes demonstrate that slugging is mitigated using …

Lead Acid Battery Modeling For Pv Applications, Rami J. Haddad, Adel El-Shahat, Youakim Kalaani

Electrical & Computer Engineering: Faculty Publications

Lead-Acid batteries continue to be the preferred choice for backup energy storage systems. However, the inherent variability in the manufacturing and component design processes affect the performance of the manufactured battery. Therefore, the developed Lead-Acid battery models are not very flexible to model this type of variability. In this paper, a new and flexible modeling of a Lead-Acid battery is presented. Using curve fitting techniques, the model parameters were derived as a function of the battery’s state of charge based on a modified Thevenin equivalent model. In addition, the charge and discharge characteristics of the derived model were investigated and …

High Aspect Ratio, Carbon Nanotube Membranes Decorated With Pt Nanoparticle Urchins For Micro Underwater Vehicle Propulsion Via H2O2 Decomposition, Kevin M. Marr, Bolin Chen, Eric J. Mootz, Jason Geder, Marius Pruessner, Brian J. Melde, Richard R. Vanfleet, Igor L. Medintz, Brian D. Iverson, Jonathan C. Claussen

Faculty Publications

The utility of unmanned Micro Underwater Vehicles (MUVs) is paramount for exploring confined spaces, but their spatial agility is often impaired when maneuvers require burst-propulsion. herein we develop high-aspect ratio (150:1), multi-walled carbon nanotube microarray membranes (CNT-MMs) for propulsive, MUV thrust generation by the decomposition of hydrogen peroxide (H₂O₂). The CNT-MMs are grown via chemical vapor deposition with diamond shaped pores (nominal diagonal dimensions of 4.5 × 9.0 [µm]) and subsequently decorated with urchin-like, platinum (Pt) nanoparticles via a facile, electroless, chemical deposition process. The Pt-CNT-MMs display robust, high catalytic ability with an effective activation energy …

Isotope-Based Fluvial Organic Carbon (Isofloc) Model: Model Formulation, Sensitivity, And Evaluation, William I. Ford, James F. Fox

Civil Engineering Faculty Publications

Watershed-scale carbon budgets remain poorly understood, in part due to inadequate simulation tools to assess in-stream carbon fate and transport. A new numerical model termed ISOtope-based FLuvial Organic Carbon (ISOFLOC) is formulated to simulate the fluvial organic carbon budget in watersheds where hydrologic, sediment transport, and biogeochemical processes are coupled to control benthic and transported carbon composition and flux. One ISOFLOC innovation is the formulation of new stable carbon isotope model subroutines that include isotope fractionation processes in order to estimate carbon isotope source, fate, and transport. A second innovation is the coupling of …

Cookie Dough Portioning Tool, Alex Haughton, Courtney Shipp, Grant Wittenberg

Mechanical Engineering

The Brown Butter Cookie Company (BBCC) is located in Cayucos, California. They sell handmade cookies made without eggs. After a batch is made, dough pieces must be portioned by hand. This process is time consuming, labor intensive, and limits the number of cookies they can make.

Our task was to design a machine to replace or improve this step of the process. After talking with the members of the BBCC and creating a list of specifications for our device, the team has formulated a detailed design of a cookie dough portioning tool for the BBCC. This report includes information on …

Brain Machine Interface Using Emotiv Epoc To Control Robai Cyton Robotic Arm, Daniel P. Prince, Mark J. Edmonds, Andrew J. Sutter, Matthew Thomas Cusumano, Wenjie Lu, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

The initial framework for an electroencephalography (EEG) thought recognition software suite is developed, built, and tested. This suite is designed to recognize human thoughts and pair them to actions for controlling a robotic arm.

Raw EEG brain activity data is collected using an Emotiv EPOC headset. The EEG data is processed through linear discriminant analysis (LDA), where an intended action is identified. The EEG classification suite is being developed to increase the number of distinct actions that can be identified compared to the Emotiv recognition software. The EEG classifier was able to correctly distinguish between two separate physical movements.

Future …

The Influence Of Neuromusculoskeletal Model Calibration Method On Predicted Knee Contact Forces During Walking, Gil Serrancolí, Allison Kinney, Benjamin J. Fregly, Josep M. Font-Llagunes

Mechanical and Aerospace Engineering Faculty Publications

This study explored the influence of three model calibration methods on predicted knee contact and leg muscle forces during walking. Static optimization was used to calculate muscle activations for all three methods. Approach A used muscle-tendon model parameter values (i.e., optimal muscle fiber lengths and tendon slack lengths) taken directly from literature. Approach B used a simple algorithm to calibrate muscle-tendon model parameter values such that each muscle operated within the ascending region of its normalized force-length curve. Approach C used a novel two-level optimization procedure to calibrate muscle-tendon, moment arm, and neural control model parameter values while simultaneously predicting …

Hydrogen And Syngas Production From Gasification Of Lignocellulosic Biomass In Supercritical Water Media, Jun-Ki Choi, Abtin Ataei, Ahmad Tavasoli, Farid Safari

Mechanical and Aerospace Engineering Faculty Publications

Novel biomass-processing technologies have been recently used for conversion of organic wastes into valuable biofuels like bio-hydrogen. Agricultural wastes are available and renewable energy resources to supply energy demand of the future. The purpose of this study is to investigate the production of hydrogen-rich syngas from wheat straw, walnut shell, and almond shell.

The Creation, Analysis, And Verification Of A Comprehensive Model Of A Micro Ion Thruster, Maxwell J. Bodnar

Master's Theses

A computational model of the micro-ion thruster MiXI has been developed, analyzed, and partially verified. This model includes submodels that govern the physical, magnetic, electrostatic, plasma physics, and power deposition of the thruster. Over the past few years, theses have been conducted with the goal of running tests and analyzing the results; this model is used to understand how the thruster components interact so as to make predictions about, and allow for optimization of, the thruster operation. Testing is then performed on the thruster and the results are compared to the output of the code. The magnetic structure of the …

Cantilever-Based Resonant Microsensors With Integrated Temperature Modulation For Transient Chemical Analysis, C. Carron, P. Getz, Stephen M. Heinrich, Fabien Josse, Oliver Brand

Civil and Environmental Engineering Faculty Research and Publications

This work introduces a resonant cantilever platform with integrated temperature modulation for real-time chemical sensing. Embedded heaters allow for rapid thermal cycling of individual sensors, thereby enabling real-time transient signal analysis without the need for a microfluidic setup to switch between analyte and reference gases. Compared to traditional mass-sensitive microsensors operating in steady state, the on-chip generation of signal transients provides additional information for analyte discrimination.

Nutrient Transformations In Algae Raceway Ponds Fed Municipal Wastewater, Carter Michael Reiff

Master's Theses

While treating domestic wastewater, algae can be grown and harvested for biofuel production. Water is a vital resource and it is imperative to conserve and reuse as much as possible. Several pilot and lab scale experiments were conducted to further research into a full scale wastewater treatment and biofuel production facility. This thesis will include these topics: nitrogen and phosphorus concentrations of clarified wastewater pond feed, nitrogen and phosphorus transformations by algae, and the potential of algae cell disruption technologies to increase nutrient solubilization.

The pilot scale experiments were conducted using nine 33 m², 0.3 m deep multi-culture …

A Comprehensive Review Of The Food And Drug Administration, The 510(K) Application Process, And Fda Certification For A Diagnostic Device, Taylor Davis

Biomedical Engineering

The company G-Force CRC LLC is currently experiencing the dichotomy of the FDA's conflicting role right now as they begin to approach FDA approval. G-Force CRC LLC is a small medical device company headquartered in San Diego, CA. The owner of the company, Dr. Ian Purcell, is an Otoneurologist apart of Alvarado Hospital. His medical practice mainly deals with patients who have balance disorders and therefore the devices that he has developed over the last 6+ years are primarily used to assist in the diagnosis of those balance disorders. G-Force CRC LLC was officially created in the summer of 2013 …

Panorama: Multi-Path Ssl Authentication Using Peer Network Perspectives, William P. Harris

Computer Engineering

SSL currently uses certificates signed by Certificate Authorities (CAs) to authenticate connections. e.g. Google will pay a CA to sign a certificate for them, so that they can prove that they're not someone pretending to be Google. Unfortunately, this system has had multiple problems, and many believe that an alternative needs to be found.

One of the ideas for alternatives is using multiple "network perspectives" to authenticate a server. The idea behind this is that, though playing man-in-the-middle (MITM) with one connection is easy, it should be difficult for an adversary to do so with many connections, especially if they …

Conversion Of A Gas Combustion Engine To An Electric Motor In A Porsche 924, Ashley Weed

BioResource and Agricultural Engineering

This paper is a walk-through of converting a gasoline Porsche 924 to and electric engine. The paper begins with steps on how to remove the gasoline engine. It then goes into setting up the electrical system for the new electric vehicle and then follows up with the motor installation. The end of the report discusses the testing and results of the electric vehicle and finishes up with recommendations to anyone who attempts a similar project.

Multiphysics Modeling To Enhance Understanding Of Microwave Heating Of Food In Domestic Ovens, Jiajia Chen

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Nonuniform heating is the biggest issue in the microwave heating of prepared meals. Multiphysics based models are promising tools to improve microwave heating uniformity by properly designing the food product. However, limited availability of accurate temperature-dependent material properties, inadequate model prediction accuracy, and high computational power and complexity in model development are three gaps that greatly limited the application of these models in the food industry.

To fill in the gaps, firstly, we developed a multitemperature calibration protocol to measure temperature-dependent dielectric properties (dielectric constant and loss factor). The temperature-dependent dielectric and thermal (thermal conductivity and specific heat capacity) properties …

Void Modeling In Resin Infusion, Mark Wesley Brandley

Theses and Dissertations

Resin infusion of composite parts has continually been reaching to achieve laminate quality equal to, or exceeding, the quality produced with prepreg in an autoclave. In order for this to occur, developers must understand the key process variables that go in to producing a laminate with minimal void content. The purpose of this research is to continue efforts in understanding 1) the effect of process conditions on the resultant void content, with a focus on resin infusion flow rate, 2) applying statistical metrics to the formation, location and size of voids formed, and 3) correlate these metrics with the local …

A Simplified Performance-Based Procedure For The Prediction Of Lateral Spread Displacements, Levi Thomas Ekstrom

Theses and Dissertations

Characterization of the seismic hazard and ground-failure hazard of a site using traditional empirical lateral spread displacement models requires consideration of uncertainties in seismic loading, site conditions, and model prediction. Researchers have developed performance-based design methods to simultaneously account for these sources of uncertainty through the incorporation of a probabilistic analytical framework. While these methods can effectively handle the various sources of uncertainty associated with empirical lateral spread displacement prediction, they can be difficult for engineers to perform in a practical manner without the use of specialized numerical tools. To make the benefits of a performance-based approach accessible to a …

Address Space Translation For Fpga Accelerated Simulators, Michael Thaddeus Chamberlain

Theses and Dissertations

Microarchitectural simulation is needed to help explore the large design space of new computer systems. These simulations are taking increasingly longer amounts of time to run due to the increasing complexity of modern processors. Co-simulation and high level synthesis are promising fields to improve the overall time required for microarchitectural simulators, and can contribute to low design times and fast simulation speeds permitting a larger range of design space exploration. While promising, co-simulation techniques must find effective ways to map the host memory address space to the FPGA memory address space to be able to correctly transfer simulation data between …

Service Dependency Analysis Via Tcp/Udp Port Tracing, John K. Clawson

Theses and Dissertations

Enterprise networks are traditionally mapped via layers two or three, providing a view of what devices are connected to different parts of the network infrastructure. A method was developed to map connections at layer four, providing a view of interconnected systems and services instead of network infrastructure. This data was graphed and displayed in a web application. The information proved beneficial in identifying connections between systems or imbalanced clusters when troubleshooting problems with enterprise applications.

Investigation Of Parameters Affecting The Nanoinjection Of Hela 229 Cancer Cells, Tyler E. Lewis

Theses and Dissertations

The ability to deliver sequences of DNA and other molecular loads across the membrane of a cell and into its nucleus is an area of interest in the medical community. One of its many applications is that of gene therapy. In contrast to other forms of treatment, gene therapy seeks to treat diseases at the cellular level. The success of these treatments depends on the technologies for cell transfection that are available. Physical methods are sometimes able to overcome poor efficiencies of chemical methods and the safety concerns of viral methods, but are usually impractical due to the limited number …