Engineering Commons^™

Solar Decathlon 2015, Solar Cal Poly; Solar Cal Poly Project Engineers, Cristina Paquin, Julien Blarel, Sanchit Joshi

Mechanical Engineering

No abstract provided.

Cable Drag Test, Alex Powers, Brandon Sadiarin, George Rodriguez Iv, Torey Kruisheer

Mechanical Engineering

The Smooth Shifters is a team composed of Alex Powers, Brandon Roy Sadiarin, George Rodriguez, and Torey Kruisheer. We are four senior mechanical engineering students at California Polytechnic State University (Cal Poly) in San Luis Obispo, California that are working on a senior design project for Specialized Bicycle Components, Inc. located in Morgan Hill, California. We will be under the advisement of Professor Sarah T. Harding of the mechanical engineering department at Cal Poly.

Specialized, one of today’s leading bicycle companies, is in need of a test setup that measures brake and shifter cable drag. High performance cyclists using time …

Impact Of Modified Inlets On Residence Times In Baffled Tanks, Jeremy S. Carlston, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sharp inlets, although prevalent, tend to reduce mixing efficiency in hydraulic contact tanks by affecting fluid and scalar transport throughout the entire system. Superior inlets are often not an option because of the prohibitive cost of upgrading preexisting tanks. To remedy this, seven inexpensive yet easily implemented attachments to a sharp inlet were tested on a full-scale, baffled, prototypical contact tank. Cumulative residence time distributions of a conservative, passive scalar were obtained for each attachment to assess their performance. A study using computational fluid dynamics of the same tank with the various attachments was then performed to strengthen the empirical …

Sustainable Treatment Of Landfill Leachate, Mohamad Anuar Kamaruddin, Mohd. Suffian Yusoff, Hamidi Abdul Aziz, Yung-Tse Hung

Civil and Environmental Engineering Faculty Publications

Landfill leachate is a complex liquid that contains excessive concentrations of biodegradable and non-biodegradable products including organic matter, phenols, ammonia nitrogen, phosphate, heavy metals, and sulfide. If not properly treated and safely disposed, landfill leachate could be an impending source to surface and ground water contamination as it may percolate throughout soils and subsoils, causing adverse impacts to receiving waters. Lately, various types of treatment methods have been proposed to alleviate the risks of untreated leachate. However, some of the available techniques remain complicated, expensive and generally require definite adaptation during process. In this article, a review of literature reported …

Aluminum Plasmonic Metamaterials For Structural Color Printing, F. Cheng, Jie Gao, L. Stan, D. Rosenmann, D. Czaplewski, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Real-Time Monitoring Of Laser Powder Bed Fusion Process Using High-Speed X-Ray Imaging And Diffraction, C. Zhao, K. Fezzaa, R. W. Cunningham, H. Wen, F. De Carlo, Lianyi Chen, A. D. Rollett, T. Sun

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Structural Color Printing Based On Plasmonic Metasurfaces Of Perfect Light Absorption, F. Cheng, Jie Gao, T. S. Luk, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

A Modular Approach For Key-Frame Selection In Wide Area Surveillance Video Analysis, Almabrok Essa, Paheding Sidike, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

This paper presents an efficient preprocessing algorithm for big data analysis. Our proposed key-frame selection method utilizes the statistical differences among subsequent frames to automatically select only the frames that contain the desired contextual information and discard the rest of the insignificant frames.

We anticipate that such key frame selection technique will have significant impact on wide area surveillance applications such as automatic object detection and recognition in aerial imagery. Three real-world datasets are used for evaluation and testing and the observed results are encouraging.

Evaluation Of Tunnel Excavation Methods In Accordance With Engineering Geology And Rock Mass Classification Systems, Özgür Satici, Tamer Topal

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In this study, the relationship between engineering geological applications and tunnel excavation methods were described. Even if several tunnel excavation methods have been suggested from past up to the present, most of them were only the various derivations of full face and sequential excavation techniques. Internationally well-known tunnel excavation methods try to classify rock mass behaviors but cannot form a numerical base for the claimed methods. Therefore, objective evaluations are required (especially for their applications) to overcome the deficits rock mass classification systems are used. NATM and ADECO-RS are the two widespread methods at the present-day tunnel practice. In both …

A Risk Analysis Model For The Maintenance And Rehabilitation Of Pipes In A Water Distribution System: A Statistical Approach, Hernan Cortez

Master's Theses

ABSTRACT

The network of pipes in potable water distribution systems (WDS) are comprised of thousands of pipes made of various materials including PVC, concrete, cast iron, and steel, among several others. The pipes are subjected to internal and external conditions that lead to their failure. Stress conditions include, but are not limited to internal pressures, traffic loading, and corrosion. The deterioration of a pipe decreases its mechanical strength which results in an increase of its probability of failure. Failures lead to loss of service which translates to loss of money due to the cost of repairs and buildup of traffic …

Analysis Of Particles Thorough The Aortic Arch During Transcatheter Aortic Valve Replacement, Andrew Joseph Janicki

Master's Theses

Ischemia caused by particles becoming dislodged during transcatheter aortic valve replacement (TAVR) is a possible complication of TAVR. The particles that become dislodged can travel out of the aortic valve, into the aortic arch, and then into either the brachiocephalic artery, the left common carotid artery, the left subclavian artery or continue into the descending aorta. If the particles continue into the descending aorta it poses no risk of causing ischemia however if it travels into the other arteries then it increases the possibility of the particle causing an ischemic event. The goal of this study is to determine what …

A Finite Element Analysis Of Tibial Stem Geometry For Total Knee Replacements, Aaron Isidro Bautista

Master's Theses

The purpose of this study was to investigate the influence of tibial stem geometry on stress shielding of the tibia for patients with a total knee replacement. Finite element analysis was used to study different tibial stem geometry types, as well as a vast array of different geometric sizes. Both a peg and stem type geometry were analyzed and compared in order to determine what type geometry causes the least amount of stress shielding. A static loading condition with a dynamic loading factor of three was used for the system and the stress responses were analyzed at regions of interest …

Mathematical Model Validation Of A Center Of Gravity Measuring Platform Using Experimental Tests And Fea, Michael Lashore

Master's Theses

This thesis sets out to derive an analytical model for a center of gravity (CG) measuring platform and examines its validity through experimental testing and Finite Element Modeling. The method uses a two-stage platform tilting process to first locate the planar CG coordinates and then find the third CG coordinate normal to the platform. An uncertainty model of the measuring platform was also developed, both CG and uncertainty models were implemented in the form of a MATLAB code. A load cell sizing task was also added to the code to assist the Integration Engineers at Jet Propulsion Laboratory in selecting …

A Customer Value Assessment Process (Cvap) For Ballistic Missile Defense, Alex Hernandez

Master's Theses

A systematic customer value assessment process (CVAP) was developed to give system engineering teams the capability to qualitatively and quantitatively assess customer values. It also provides processes and techniques used to create and identify alternatives, evaluate alternatives in terms of effectiveness, cost, and risk. The ultimate goal is to provide customers (or decision makers) with objective and traceable procurement recommendations. The creation of CVAP was driven by an industry need to provide ballistic missile defense (BMD) customers with a value proposition of contractors’ BMD systems. The information that outputs from CVAP can be used to guide BMD contractors in formulating …

Clarification Of Recreational Pool Water Using Biological Additives Produced By Biowish(Tm), Reese Nathaniel Wilson

Master's Theses

Effects of commercially available bacterial products were investigated on two common recreational pool contaminants: sunscreen and cyanuric acid (CYA). Microbial products developed by BiOWiSH Technologies, Inc. were tested for enhancing mechanical filtration and water clarification in bench-scale bioreactors, with conditions mimicking those of recreational pool water. Bacterial consortia included proprietary mixes of Bacillus, Lactobacillus and Pseudomonas, and other genera of bacteria. BiOWiSH products are either fermented on a solid substrate consisting of rice bran and soy meal, or they are mixed with a soluble diluent. Twenty-nine BiOWiSH products were tested throughout forty experiments.

Experiments were carried out to determine both …

Rest Api To Access And Manage Geospatial Pipeline Integrity Data, Alexandra Michelle Francis

Master's Theses

Today’s economy and infrastructure is dependent on raw natural resources, like crude oil and natural gases, that are optimally transported through a net- work of hundreds of thousands of miles of pipelines throughout America[28]. A damaged pipe can negatively a↵ect thousands of homes and businesses so it is vital that they are monitored and quickly repaired[1]. Ideally, pipeline operators are able to detect damages before they occur, but ensuring the in- tegrity of the vast amount of pipes is unrealistic and would take an impractical amount of time and manpower[1].

Natural disasters, like earthquakes, as well as construction are just …

Inlet Shape Considerations For Split-Wing Electric Distributed Propulsion, Kurt Vonderhaar Papathakis

Master's Theses

This thesis aims to uncover preliminary design relationships for an inlet of a split-wing electric distributed propulsion regional airliner. Several aspects of the inlet design were investigated, including: the overall thickness of the airfoil section with respect to the chord, inlet throat area, and lip radius. These parameters were investigated using several angles of attack and mass flow rates through the fan. Computational fluid dynamics, with a 2^nd Order turbulence model was used and validated against World War II era data from NACA, as those studies were the most pertinent wind tunnel data available. Additionally, other works by Boeing, …

Sweep Stability Characterization Of A Vernier-Tuned Distributed Bragg Reflector (Vt-Dbr) All-Semiconductor Tunable Swept Laser System At 1550 Nm For Sensing Applications, Roric Christian Martens Biersach

Master's Theses

The short-term jitter and longer-term wander of the frequency sweep profile of a Vernier-Tuned Distributed Bragg Reflector (VT-DBR) laser at 1550 nm used in optical coherence tomography (OCT) and other sensing applications is characterized in this work. The VT-DBR has demonstrated success in source-swept OCT (SSOCT), performing both intensity and phase-sensitive OCT.

The purpose of this paper is to investigate one of the unique aspects of the VT-DBR laser that makes it successful in OCT: the stability of the linear optical frequency sweep. A highly stable linear optical frequency sweep implies benefits for further fiber sensing applications including fiber Bragg …

Structural Micrometeoroid And Radiation Shielding For Interplanetary Spacecraft, Jared Allen Ruekberg

Master's Theses

This paper focused on two significant space forces that can affect the success of a spacecraft: the radiation and micrometeoroid environments. Both are looked at in the context of the region of space between Earth and Mars. The goal was create reference environments, to provide context to results of environmental modeling, and to provide recommendations to assist in early design decisions of interplanetary spacecraft. The radiation section of this report used NASA's OLTARIS program to generate data for analysis. The area of focus was on the radiation effects for crewed missions, therefore effective dose equivalent was the metric used to …

Toward The Systematization Of Active Authentication Research, Daniel Fleming Gerrity

Master's Theses

Authentication is the vital link between your real self and your digital self. As our digital selves become ever more powerful, the price of failing authentication grows. The most common authentication protocols are static data and employed only once at login. This allows for authentication to be spoofed just once to gain access to an entire user session. Behaviometric protocols continuously consume a user’s behavior as a token of authentication and can be applied throughout a session, thereby eliminating a fixed token to spoof. Research into these protocols as viable forms of authentication is relatively recent and is being conducted …

Locating Optimal Water Quality Monitoring Locations Using Demand Coverage Index Method, Jeffrey Scott Brake

Master's Theses

Water quality regulations are always expanding especially in the field of water quality monitoring; however, threats to our water distribution systems still remain. Components of water distribution systems are susceptible to intentional and accidental contamination; therefore, they represent highly vulnerable aspects of our vital infrastructure.

An analysis was performed on a city in California with a population of 30,000 to 40,000 residents. The analysis is performed to determine the optimal locations of monitoring stations throughout the water distribution system. The method presented by Liu and colleagues (Liu et al, 2012) selects the optimal monitoring locations for the virtual California city …

Analysis Of Mos Current Mode Logic (Mcml) And Implementation Of Mcml Standard Cell Library For Low-Noise Digital Circuit Design, Marcus Edwin Allan Heim

Master's Theses

MOS current mode logic (MCML) offers low noise digital circuits that reduce noise that can cripple analog components in mixed-signal integrated circuits, when compared to CMOS digital circuits. An MCML standard cell library was developed for the Cadence Virtuoso Integrated Circuit (IC) design software that gives IC designers the ability to design complex, low noise digital circuits for use in mixed-signal and noise sensitive systems at a high level of abstraction, allowing them to get superior products to market faster than competitors. The MCML standard cell library developed and presented here allows for fast development of mixed signal circuits by …

Hand Operated Tabletop Letterpress Assembly Instructions 1.0, George Chiu, Brendan Domos, Spencer Herzog, Nathan Sandidge, Kevin Weinstein

Theses

A group of RIT Mechanical Engineering students spent the 2014-2015 academic year in their senior design class collaborating with the RIT Cary Graphic Arts Collection to design and fabricate a 21st century hand-operated platen press.

The press that was designed during this engineering exercise met several requirements:

• be under 30 lbs
• fit in a 24 inch square table top space
• be manufactured with a majority of components which could be purchased from a standard parts supplier
• be able to print with commonly manufactured ink rollers, ink, letterpress chases, spacing and furniture
• the platen and packing had to be adjustable to …

Impact Of Stoichiometry On Structural And Optical Properties Of Sputter Deposited Multicomponent Tellurite Glass Films, Okechukwu Ogbuu, Qingyang Du, Hongtao Lin, Lan Li, Yi Zou, Erick Koontz, Charmayne Smith (Lonergan), Sylvain Danto, Kathleen Richardson, Juejun Hu

Materials Science and Engineering Faculty Research & Creative Works

Multicomponent TeO₂-Bi₂O₃-ZnO (TBZ) glass thin films were prepared using RF magnetron sputtering under different oxygen flow rates. The influences of oxygen flow rate on the structural and optical properties of the resulting thin films were investigated. We observed that thin films sputtered in an oxygen-rich environment are optically transparent while those sputtered in an oxygen-deficient environment exhibit broadband absorption. The structural origin of the optical property variation was studied using X-ray diffraction, X-ray photoelectron spectroscopy, Raman Spectroscopy, and transmission electron microscopy which revealed that the presence of under-coordinated Te leads to the observed optical …

Jurisdictional Roadside Ditches, Sarah M. Mccormack, Christopher W. Van Dyke, Doug Kreis

Kentucky Transportation Center Research Report

Section 404 of the Clean Water Act (CWA) mandates that state agencies and other entities perform compensatory mitigation when their activities impair jurisdictional waters. In the Commonwealth of Kentucky, the Kentucky Transportation Cabinet (KYTC) is required to pay in-lieu fees or purchase stream mitigation credits when a roadside ditch is impaired or relocated as part of a road construction project. In-lieu fees and stream mitigation credits are costly, and ditches that have suffered degraded habitat and loss of hydrogeomorphic functionality are treated as total losses when they are impacted by construction and maintenance activities. This raises the question of whether …

Chemical Oxidative Polymerization, Optical, Electrochemical And Kinetic Studies Of 8-Amino-2-Naphthol, Fatih Dogan, Ismet Kaya, Ali Bilici, Mehmet Yildirim

Materials Science and Engineering Faculty Research & Creative Works

Here the polymerization of 8-amino-2-naphthol (AN) is reported without use of an additional external template, surfactants or functional dopants. For this, NaOCl and hydrochloride acid solution (1.0 M) were used as oxidant and reaction medium, respectively. The structure of oligomer was elucidated by FT-IR, UV–vis and 1 H-NMR techniques. The number average molecular weight of oligomer was found to be 2200Da with a polydispersity index of 1.4 by size exclusion chromatography. This oligomer exhibited a multicolor emission behavior as it was excited at different wavelengths. Redox states were clarified by cyclic voltammetry (CV) technique and the relationship between anodic/cathodic peak …

Project Llama: Making A Cappella Arranging Easier, Jason Lu

Liberal Arts and Engineering Studies

This project was intended to improve the current state of a cappella arranging. It explains the problems with current tools and explores other options.

Pl-X (Roborodentia), Kelly Leung, William Luo, Jeffrey Tang

Computer Engineering

Pl-x is the name of the robot that will be competing in Roborodentia, an annual autonomous robot competition. This year the competition involves moving rings from one end of a course to the opposite end of the course.

Automated Solar-Powered Chicken Coop Door, Brenna Yagade

Computer Engineering

The purpose of this project was to plan, design, and build an automated, low power system to open and close a chicken-coop door, which is powered through a solar panel.

A Microscopic Simulation Approach To Performance Evaluation Of Intelligent Transportation System Corridors: A Case In Michigan, Matthew Levi Clark

Masters Theses

A cost and benefit evaluation of the Michigan Department of Transportation’s (MDOT) Intelligent Transportation Systems (ITS) is performed through integration of analytical techniques and microscopic traffic microsimulation. Observed freeway corridor incident logs and characteristics are studied to determine representative incident management patterns on choice study corridors. The Quadstone Paramics microsimulation traffic package is used to model the selected corridors during various analysis scenarios and investigate the effects of ITS on freeway incident management performance.