Engineering Commons^™

The Future Of Rural Communities, Alondra B. Perez, Yanliang Zhang (Mentor)

Idaho Conference on Undergraduate Research

There is a problem in how modern energy is being distributed throughout the world; less than a quarter of the population have access to energy. Limited energy access is seen in rural areas because of the costs that comes from transporting material and making modern energy resources (solar panels, wind turbines, etc..). Through research on thermoelectric devices, there have been many theories tested in order to improve energy efficiency focusing on easy maneuverable resources. At Boise State’s Advanced Energy Lab, thermoelectric generators are being created and modified which can be used to help communities from rural areas power utilities needed …

Integrity Coded Databases (Icdb) - An Evaluation Of Efficiency, Performance, And Practicality, Jake Rodden, Jyh-Haw Yeh (Mentor), Elmer Duran, Dan Kondratyuk

Idaho Conference on Undergraduate Research

Recently, cloud database storage has become an inexpensive and convenient option to store information; however, this relatively new area of service can be vulnerable to security breaches. Storing data in a foreign location requires the owner to relinquish control of their information. This opens the possibility for internal, malicious attacks that can involve the manipulation, omission, or addition of data. Our research tests a potential solution for retaining data as it was intended to be stored (known as integrity) in these cloud-stored databases: by converting the original databases to Integrity-Coded Databases (ICDB). ICDBs utilize Integrity Codes: cryptographic codes created for …

A Study Of The Selective Laser Alloying Of Elemental Titanium And Boron Powder, Yingbin Hu

Theses and Dissertations - UTB/UTPA

To better understand the selective laser alloying process of elemental titanium and boron powder, theoretic models are created which takes material related, reaction related, laser related, and other affecting factors into consideration. These models do help interpret the corresponding experiment results. In turn, the related experiment results validate the theoretic models created. In practice, the experiments with two different molar ratios of 1:2 and 4:1 between titanium and boron are carried out. The huge amount of energy released because of reaction between titanium and boron during laser irradiation makes it hard to understand and control the alloying process. At the …

Impair-Then-Repair: A Brief History & Global-Scale Hypothesis Regarding Human-Water Interactions In The Anthropocene, Charles J. Vörösmarty, Michel Meybeck, Christopher L. Pastore

Advanced Science Research Center

Water is an essential building block of the Earth system and a nonsubstitutable resource upon which humankind must depend. But a growing body of evidence shows that freshwater faces a pandemic array of challenges. Today we can observe a globally significant but collectively unorganized approach to addressing them. Under modern water management schemes, impairment accumulates with increasing wealth but is then remedied by costly, after-the-fact technological investments. This strategy of treating symptoms rather than underlying causes is practiced widely across rich countries but leaves poor nations and many of the world's freshwater life-forms at risk. The seeds of this modern …

A Cloud-Based Gssha Index Map Editor Utility For Watershed Decision Support, Jocelynn Marie Anderson

Theses and Dissertations

Preventing damages from flooding is critically important for city managers and planners.Efforts in protecting infrastructure from flooding are often coupled with building hydrologicmodels to provide predictions of what is likely to happen during storm events. As land usechanges, these models must be updated, which is more challenging with sophisticated models. Ateam of researchers from universities in Utah and Wyoming have been developing tools forwater management in the Intermountain West as part of a collaborative NSF research grantcalled CI-WATER. In particular, a free and open source web platform called Tethys has beendeveloped to support the development and hosting of hydrologic web …

Evaluation Of Empirical Prediction Methods For Liquefaction-Induced Lateral Spread From The 2010 Maule, Chile, MW 8.8 Earthquake In Port Coronel, Nicole D. Williams

Theses and Dissertations

Over the past several decades, empirical formulas have been developed and improved to predict liquefaction and lateral spread based on a database of case histories from observed earthquakes, such as Youd et al. (2002) and Rauch and Martin (2000). The 2010 Maule Chile earthquake is unique first of all because it is recent and was not used to develop recent liquefaction and lateral spread evaluation methods, and therefore can be reasonably used to evaluate the effectiveness of such equations. Additionally, the 8.8 magnitude megathrust event fills a significant gap in the databases used to develop these empirical formulas, which tends …

Design And Validation Of Hardware-In-The-Loop Testbed For Proximity Operations Payloads, Kristia K. Harris

Doctoral Dissertations and Master's Theses

The research presented here is a new testbed design for CubeSat and payload testing and development. This research demonstrates a low-cost, hardware-in-the-loop testing apparatus for use with university CubeSat programs for testing throughout the different levels of the development process. The average university CubeSat program undergoes very little hardware-in-the-loop testing. Most of the focus is the targeted towards performance testing and environmental testing which occur after completion the development process. This research shows that, for minimal schedule and cost impact, testing can occur early in the development process. The testbed presented here demonstrates suitable accuracy to be used for advanced …

Nanosecond Pulse Electric Field Activated-Platelet Rich Plasma Enhances The Return Of Blood Flow To Large And Ischemic Wounds In A Rabbit Model, Barbara Y. Hargrave, Francis Li

Bioelectrics Publications

Platelet-rich plasma is a therapeutic strategy used for accelerating wound healing of a wide range of tissues through the release of platelet growth factors. Here, we describe a nonchemical, safe method for preparing platelet-rich plasma using nanosecond-pulsed electric fields (nsPEFs) and investigated the effect of this platelet-rich plasma on reperfusion of blood in large skin flap or ischemic hind limb wounds in New Zealand White rabbits. Laser Doppler images of blood flow to the dorsal surface of skin flap wounds or to ischemic hind limb wounds were obtained from wounds treated with 0.9% saline or nanosecond-pulsed electric field prepared platelet-rich …

Hierarchical Composition Of Memristive Networks For Real-Time Computing, Jens Bürger, Alireza Goudarzi, Darko Stefanovic, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

Advances in materials science have led to physical instantiations of self-assembled networks of memristive devices and demonstrations of their computational capability through reservoir computing. Reservoir computing is an approach that takes advantage of collective system dynamics for real-time computing. A dynamical system, called a reservoir, is excited with a time-varying signal and observations of its states are used to reconstruct a desired output signal. However, such a monolithic assembly limits the computational power due to signal interdependency and the resulting correlated readouts. Here, we introduce an approach that hierarchically composes a set of interconnected memristive networks into a larger reservoir. …

Sram Compiler For Automated Memory Layout Supporting Multiple Transistor Process Technologies, Brandon Hilgers

Master's Theses

This research details the design of an SRAM compiler for quickly creating SRAM blocks for Cal Poly integrated circuit (IC) designs. The compiler generates memory for two process technologies (IBM 180nm cmrf7sf and ON Semiconductor 600nm SCMOS) and requires a minimum number of specifications from the user for ease of use, while still offering the option to customize the performance for speed or area of the generated SRAM cell. By automatically creating SRAM arrays, the compiler saves the user time from having to layout and test memory and allows for quick updates and changes to a design. Memory compilers with …

Development Of An Interactive Wave Drag Capability For The Openvsp Parametric Geometry Tool, Michael Jon Waddington

Master's Theses

Minimizing wave drag is critical to successful and efficient transonic and supersonic flight. Area-ruling is the process of managing the cross-sectional area of an aircraft to lessen the wave drag experienced in flight. Effectively calculating the necessary areas for a given aircraft can be difficult, and existing tools for conducting a wave drag analysis often carry limitations in both functionality and availability.

In this work, the author utilized an existing parametric geometry tool named OpenVSP to create an interactive design tool for approximating zero-lift wave drag. Here, the wave drag calculation methodology used in industry for decades is combined with …

Enhancing Freshman Engineering Instruction With In-Class Interaction Systems And E-Books, Branimir Pejcinovic, Phillip K. Wong

Electrical and Computer Engineering Faculty Publications and Presentations

Electrical engineering students in our department take a year-long series of courses which introduces electrical engineering as a discipline and provides good grounding in engineering problem solving and programing. We have recently attempted to make the second course in the sequence more engaging by applying active learning techniques, including assigned reading and exercises prior to lectures, in-class exercises using a classroom interaction system, and programming exercises during lectures. Our results are mixed: while we think that students have learned more than if we had not used these techniques, we have not completely won over our students. While using an e-book …

Design Optimization Of A Linear Generator With Dual Halbach Array For Human Motion Energy Harvesting, Wenjia Zhao

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

A linear generator for human motion energy harvesting is designed and optimized in this study. The linear generator can be used to convert human motion energy to electrical energy to charge portable electronics, such as cellular phones, wireless internet devices, etc. The use of dual Halbach magnet arrays in the proposed generator provides a significant improvement in power density. Different dual Halbach arrays were studied, and a novel Halbach array with nonuniform magnet blocks is proposed to enhance the air-gap flux density in the linear generator for a given size and weight of permanent magnet material. Sensitivity analyses were performed …

Comparison Of Two Wake Models For Use In Gradient-Based Wind Farm Layout Optimization, Jared Thomas, Eric Tingey, Andrew Ning

Faculty Publications

Wind farm layout has a significant impact on the productivity of a wind farm. To ensure that the turbines are placed in the most advantageous arrangement, optimization algorithms are often used during the layout design process. Depending on the wake model used for the optimization, optimizing the layout can be time intensive or potentially inaccurate. In this paper we present a comparison of optimization results using two simple wake models, the FLORIS model and the Jensen model. Results highlight some of the key similarities and differences of layout optimization results when different wake models are used.

Implementation Of Sustainability Improvements At The Facility Level: Business Motivations And Impact Of P2 Intern Recommendations, Vincent D. Kuppig

Department of Environmental Engineering: Theses and Other Student Research

Many sustainability and pollution prevention (P2) technical assistance programs exist across the Unities States. There is a need to quantify the actual impact using various metrics and, in addition, to identify the driving forces behind a company’s decision-making process. The University of Nebraska-Lincoln Partners in Pollution Prevention and the Kansas State University Pollution Prevention Institute intern programs partnered to complete 30 reassessments in 2014 to obtain specific information related to each P2 recommendation. After being reassessed, the clients were surveyed concerning their motivations for implementing and not implementing each recommendation; 23 clients responded to the survey.

The clients surveyed were …

Inert-Gas Condensed Co–W Nanoclusters: Formation, Structure And Magnetic Properties, Farhad Reza Golkar-Fard

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Rare-earth permanent magnets are used extensively in numerous technical applications, e.g. wind turbines, audio speakers, and hybrid/electric vehicles. The demand and production of rare-earth permanent magnets in the world has in the past decades increased significantly. However, the decrease in export of rare-earth elements from China in recent time has led to a renewed interest in developing rare-earth free permanent magnets. Elements such as Fe and Co have potential, due to their high magnetization, to be used as hosts in rare-earth free permanent magnets but a major challenge is to increase their magnetocrystalline anisotropy constant, K₁, which largely …

A Framework To Simplify The Choice Of Alternative Analysis And Selection Methods, James Paul Lewis Holzgrefe

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation contributes a framework for analysts and engineering managers to investigate and choose alternative analysis and selection methods based upon their problem and its context. It began as an investigation into the alternative analysis and selection methods used in military planning. The existing military methods were inconsistent, violated the decision science body of knowledge, and provided no guidance to the practitioner on matching methods to problems. These challenges made it necessary to conduct this investigation.

This research used a three-phase mixed methods approach. The first phase applied the general inductive method to the decision making body of knowledge to …

Characterization And Decoding Of Speech Representations From The Electrocorticogram, Shreya Chakrabarti

Electrical & Computer Engineering Theses & Dissertations

Millions of people worldwide suffer from various neuromuscular disorders such as amyotrophic lateral sclerosis (ALS), brainstem stroke, muscular dystrophy, cerebral palsy, and others, which adversely affect the neural control of muscles or the muscles themselves. The patients who are the most severely affected lose all voluntary muscle control and are completely locked-in," i.e., they are unable to communicate with the outside world in any manner. In the direction of developing neuro-rehabilitation techniques for these patients, several studies have used brain signals related to mental imagery and attention in order to control an external device, a technology known as a brain-computer …

Improving Engagement Assessment By Model Individualization And Deep Learning, Feng Li

Electrical & Computer Engineering Theses & Dissertations

This dissertation studies methods that improve engagement assessment for pilots. The major work addresses two challenging problems involved in the assessment: individual variation among pilots and the lack of labeled data for training assessment models.

Task engagement is usually assessed by analyzing physiological measurements collected from subjects who are performing a task. However, physiological measurements such as Electroencephalography (EEG) vary from subject to subject. An assessment model trained for one subject may not be applicable to other subjects. We proposed a dynamic classifier selection algorithm for model individualization and compared it to other two methods: base line normalization and similarity-based …

High Efficiency Ultrathin Cigs Solar Cells, Krishna Prasad Aryal

Electrical & Computer Engineering Theses & Dissertations

The global demand for renewable energy is growing rapidly. Increasing the global share of alternative sources of energy would not only bring environmental benefits, but also enhance overall energy security by diversifying energy supply. Many technology options exist nowadays to harvest the power of the sun, a sustainable energy source, and generate electricity directly from this source via the photovoltaic effect. Among them, Cu(In,Ga)Se₂ (CIGS) has gained significant momentum as a possible high efficiency and low cost thin film solar cell material. The capacity to scale up any photovoltaic technology is one of the criteria that will determine its …

A Vector Channel Based Approach To Mimo Radar Waveform Design For Extended Targets, Amanda Joan Angell Daniel

Electrical & Computer Engineering Theses & Dissertations

Radar systems have been used for many years for estimating, detecting, classifying, and imaging objects of interest (targets). Stealthier targets and more cluttered environments have created a need for more sophisticated radar systems to gain more precise information about the radar environment. Because modern radar systems are largely defined in software, adaptive radar systems have emerged that tailor system parameters such as the transmitted waveform and receiver filter to the target and environment in order to address this need.

The basic structure of a radar system exhibits many similarities to the structure of a communication system. Recognizing the parallel composition …

Characterizing Queue Dynamics At Signalized Intersections From Probe Vehicle Data, Semuel Yacob Recky Rompis

Civil & Environmental Engineering Theses & Dissertations

Probe vehicles instrumented with location-tracking technologies have become increasingly popular for collecting traffic flow data. While probe vehicle data have been used for estimating speeds and travel times, there has been limited research on predicting queuing dynamics from such data. In this research, a methodology is developed for identifying the travel lanes of the GPS-instrumented vehicles when they are standing in a queue at signalized intersections with multilane approaches. In particular, the proposed methodology exploits the unequal queue lengths across the lanes to infer the specific lanes the probe vehicles occupy. Various supervised and unsupervised clustering methods were developed and …

Hydrothermal Catalytic Liquefaction And Deoxygenation Of Biomass For Renewable Fuel Production, Sergiy Popov

Civil & Environmental Engineering Theses & Dissertations

In recent years, sub- and supercritical water technologies received an increasing attention because of the numerous advantages they offer for biomass converting into biofuels. Water at elevated temperatures and pressures provides an ideal medium for chemical transformations. It serves as a reactant, reaction medium, and catalyst that helps biomass compounds undergo hydrolysis, depolymerization, dehydration, decarboxylation, and condensation/repolymerization reactions. Biomass is the fourth largest source of energy in the world after coal, oil, and natural gas that has the potential to provide the large scale substitution of hydrocarbon-based liquid transportation fuels and minimize the environmental issues. Biomass typically contains 40-60% oxygen. …

Characteristics Of Laser-Induced Plasma Flame Kernel Formation And Evolution, Wilmer Flores

Mechanical & Aerospace Engineering Theses & Dissertations

With increasing interest to engineer more efficient combustion engines, the use of laser induced ignition demonstrates to be a compelling alternative to the conventional electric spark plug. The benefits greatly outweigh those found in a conventional electric spark motor whereas research shows improvements in reduced energy consumption and harmful emissions. In addition, the ability to divert the laser beam and its reliability are advantages. Laser-based ignition is capable of generating a plasma for combustion in versatile surroundings where ignition is desired. Laser induced ignition of methane-air was investigated under diverse flow and mixture conditions. To perform this experiment three air/fuel …

Nano Scale Mechanical Analysis Of Biomaterials Using Atomic Force Microscopy, Diganta Dutta

Mechanical & Aerospace Engineering Theses & Dissertations

The atomic force microscope (AFM) is a probe-based microscope that uses nanoscale and structural imaging where high resolution is desired. AFM has also been used in mechanical, electrical, and thermal engineering applications. This unique technique provides vital local material properties like the modulus of elasticity, hardness, surface potential, Hamaker constant, and the surface charge density from force versus displacement curve. Therefore, AFM was used to measure both the diameter and mechanical properties of the collagen nanostraws in human costal cartilage. Human costal cartilage forms a bridge between the sternum and bony ribs. The chest wall of some humans is deformed …

Constrained Discrete Phase Control Of A Heaving Wave Energy Converter In Irregular Seas Using Reinforcement Learning, Praveen D. Malali

Mechanical & Aerospace Engineering Theses & Dissertations

Designed for offshore deployment in irregular seas, the point absorber wave energy conversion (WEC) system is promisingly attractive amongst the currently available WEC technologies. The effectiveness of phase control when applied to a heaving point absorber through a hydraulic power take-off (PTO) system is systematically investigated in both regular and irregular waves. For this purpose, two phase control accumulators are utilized in the hydraulic PTO system. Simulations are performed in MATLAB® using the Cummins equation to model the dynamics of the heaving point absorber in the time domain.

For a given sea state, the opening instant of the control valves …

Life Cycle Assessment Using Argonne Greet Model Of Algae Based Biofuels Produced Using Flash Hydrolysis Process, Andrew P. Bessette

Civil & Environmental Engineering Theses & Dissertations

Traditional processing methods of algae to biofuels require dewatering after harvesting of the algae before the lipids can be extracted. This is typically the most energy intensive and therefore the most expensive step. Old Dominion University has successfully utilized a flash hydrolysis process where proteins are solubilized into the liquid phase of product and the remainder lipid-rich, low nitrogen product is separated into a solid phase. The solid phase (lipid-rich) is then an ideal candidate for biofuel feedstock and the liquid phase, or hydrolysate, can be used for coproducts such as a source of nutrients for new batches of algal …

Accuracy Comparison Of Numerical Integration Algorithms For Real-Time Hybrid Simulations, Ganesh Anant Reddy

Civil & Environmental Engineering Theses & Dissertations

The use of accurate numerical integration algorithms is one of the key factors for a successful real-time hybrid simulation (RTHS). In RTHSs, explicit integration algorithms are preferred more than implicit methods since all calculations need to be completed within a given time step during simulation. Explicit methods require the use of effective stiffness and damping for experimental substructures, which are incorporated into the calculation of the integration parameters. In general, those values that are greater than the expected stiffness and damping of the experimental substructure are used to ensure the stability of simulation. If a rate-dependent and nonlinear experimental substructure …

Inelastic Behavior And Strength Of Steel Beam-Columns With Applied Torsion, Mamadou Konate

Civil & Environmental Engineering Theses & Dissertations

This dissertation presents the outcome of an experimental and theoretical study of the inelastic behavior and strength of steel beam-columns with applied torsion. Although the international steel design specifications contain interaction relations for biaxially loaded beam-columns, the influence of applied torsion on such members has been completely ignored in the past. A series of hollow square section steel members are tested using an apparatus specially designed to apply torsion in the presence of an axial load and biaxial bending. The theoretical analysis involves formulation of a system of materially nonlinear differential equations and their solution based on a finite integral …

Systems Theory-Based Construct For Identifying Metasystem Pathologies For Complex System Governance, Polinpapilinho F. Katina

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop a systems theory-based construct for metasystem pathologies identification in support of the problem formulation phase of systems-based methodologies using an inductive research design. Problem formulation has been identified as one of the most critical stages in complex system development since it influences later stages in complex system understanding. In modern society where the operating landscape is characteristically ambiguous, mired by complexity, emergence. interdependence, and uncertainty, the concept of problem formulation is used to ensure right issues affecting complex systems surface and addressed to meet expected system performance and viability. In this research, …