Engineering Commons^™

A Community Of World Class Engineering Students, Devshikha Bose, Krishna Pakala

Mechanical and Biomedical Engineering Faculty Publications and Presentations

This paper is a work in progress report on an Engineering Living Learning Community (LLC) at Boise State University. Though the LLC under consideration is for the time period of Fall 2014 to Fall 2016, this report is limited to student as well as instructor anecdotal and self-reported experiences, observations, and evaluations made during Fall 2014 and Spring 2015. The mission of the Residential College program at BSU is to integrate student academic and personal life in a residential setting, so as to develop interdisciplinary knowledge, foster deep learning, and maximize student success. In support of this goal, students completed …

Work In Progress -- Does A Technology-Rich Transportation Engineering Experiences Increase Interest In Civil Engineering, Marissa K. Orr, Sanjay Tewari, David E. Hall, Norman D. Pumphrey

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper examines whether a technology-rich transportation engineering experience generates interest among college freshman students towards transportation related degrees and careers, specifically, whether it increases interest in civil engineering. Louisiana Tech’s first-year engineering experience provides relevant, project-focused education for over 500 students each year and an opportunity to introduce transportation-related projects. The six semester-hour, three-course sequence, called “Living with the Lab,” boosts experiential learning through student ownership of inexpensive laboratory equipment. In one section of the Living with the Lab course, a transportation engineer visited the class and the students were led through a technology-rich transportation engineering activity. They used …

An Improved Variable Step-Size Zero-Point Attracting Projection Algorithm, Jianming Liu, Steven L. Grant

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes an improved variable step-size (VSS) scheme for zero-point attracting projection (ZAP) algorithm. The proposed VSS is proportional to the sparseness difference between filter coefficients and the true impulse response. Meanwhile, it works for both sparse and non-sparse system identification, and simulation results demonstrate that the proposed algorithm could provide both faster convergence rate and better tracking ability than previous ones.

Book Review: High G Flight - Physiological Effects And Countermeasures, Stefan Kleinke

International Journal of Aviation, Aeronautics, and Aerospace

This review provides insight on the content and a review of the quality of the recent release of High G Flight - Physiological Effects and Countermeasures from Ashgate Publications.

This review does not reflect the views of IJAAA or ERAU. This work was not peer reviewed.

High G Flight - Physiological Effects and Countermeasures

Interview With Joe Volpe, Rca Heritage Program

RCA Oral History Transcripts

Interview with Joe Volpe for the RCA Heritage Program Oral History grant.

Fast Data Pattern Based Electromagnetic Interference Evaluation For Ic Packaging, Nick K.H. Huang, Li (Lijun) Jun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

Electromagnetic interference (EMI) is becoming more serious when the data rate of the digital system continues increasing. However, its modeling and analysis are very challenging. In this paper, a novel electromagnetic superposition method is developed to model the IC packaging electromagnetic emission. It employs the equivalence principle to obtain the electromagnetic field response over a broad spectrum. Then it uses the linear property of the passive parasitic system to superpose the contribution of different signals on the packaging. As a result, with certain pre-calculations, it is convenient to compute the electromagnetic emission efficiently from different signals with various data pattern …

The Fast Contour Deformation Method For Calculating The High Frequency Scattered Field From The Fock Current On The Convex Scatterer, Yu Mao Wu, Weng Cho Chew, Li (Lijun) Jun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, the Fock current from the 3-D convex cylinder is considered. By using the incremental length diffraction coefficient technique (ILDC), the resultant high frequency scattered fields are expressed in terms of the Fock current from convex scatterer. To efficiently solve the scattered fields, we propose the efficient NSDP method. Numerical examples from the convex cylinder scatterer illustrate that the proposed NSDP method for calculating the high frequency scattered fields could achieve the frequency independent computational workload and error controllable accuracy.

Aviation Bird Hazard In Nexrad Dual Polarization Weather Radar Confirmed By Visual Observations, Bradley M. Muller, Frederick R. Mosher, Christopher G. Herbster, Anthony T. Brickhouse

International Journal of Aviation, Aeronautics, and Aerospace

Birds represent a significant hazard to flying aircraft as illustrated by the “Miracle on the Hudson” encounter in 2009 between U.S. Airways Flight 1549 and a flock of Canada Geese, forcing the flight to ditch in the river. Birds are common in the skies over Florida during the spring migration season, and often appear in the National Weather Service’s (NWS) NEXRAD weather radar imagery as an easily recognizable signature known as a “roost ring.” This paper presents a NEXRAD roost ring case in central Florida in a rare instance where the signatures were confirmed by visual observations of the birds. …

Entropy Minimization Design Approach Of Supersonic Internal Passages, Jorge Sousa, Guillermo Paniagua

School of Aeronautics and Astronautics Faculty Publications

Fluid machinery operating in the supersonic regime unveil avenues towards more compact technology. However, internal supersonic flows are associated with high aerodynamic and thermal penalties, which usually prevent their practical implementation. Indeed, both shock losses and the limited operational range represent particular challenges to aerodynamic designers that should be taken into account at the initial phase of the design process. This paper presents a design methodology for supersonic passages based on direct evaluations of the velocity field using the method of characteristics and computation of entropy generation across shock waves. This meshless function evaluation tool is then coupled to an …

Global Optimized Isothermal And Nonlinear Models Of Earth’S Standard Atmosphere, Nihad E. Daidzic, Ph.D.,

International Journal of Aviation, Aeronautics, and Aerospace

Both, a global isothermal temperature model and a nonlinear quadratic temperature model of the ISA was developed and presented here. Constrained optimization techniques in conjunction with the least-square-root approximations were used to design best-fit isothermal models for ISA pressure and density changes up to 47 geopotential km for NLPAM, and 86 orthometric km for ISOAM respectively. The mass of the dry atmosphere and the relevant fractional-mass scale heights have been computed utilizing the very accurate eight-point Gauss-Legendre numerical quadrature for both ISOAM and NLPAM. Both, the ISOAM and the NLPAM represent viable alternatives to ISA in many practical applications and …

Application Of Fiscal Incentives For Development Of East Natuna Gas Field For Long-Term National Natural Gas Demand, Marwan Batubara, Widodo Wahyu Purwanto, Akhmad Fauzi

Makara Journal of Technology

East Natuna gas field, which has proven reserves of 46 trillion cubic feet, is projected to meet long-term natural gas needs. However, CO2-content of the gas reserves reaches 71%, leading to expensive development costs. This research investigates the feasibility of the field based on several fiscal incentives. Firstly, gas supply-demand until year 2040 was analyzed. Then, based on the analysis, the field was developed using high CO2 gas separation technology to produce gas of 1300 MMSCFD in 2023, 2600 MMSCFD in 2031, and 3900 MMSCFD in 2039. Finally, the economic feasibility was assessed using cash flow analysis in accordance with …

Cloud Service Adoption Decision, Greg Wease, Chih-Jen Yu, Kwasi Boateng, Leong Chan

Engineering and Technology Management Faculty Publications and Presentations

Many organizations with an IT infrastructure consisting of a combination of hardware and software, look for ways to achieve greater efficiencies, cost-savings associated with maintenance and upkeep, ease of use, while maintaining a great level of security. The main idea behind this research paper is to better understand the decision-making process with respect to how an IT organization evaluates its needs and chooses between different computer-hosting environments, i.e.: public cloud, private cloud, hybrid – combination of public and private cloud, lastly, an in-house platform, which is hosted internal to the organization and/or via a datacenter. A widely-accepted definition of “Cloud …

Assessing The Effectiveness Of Big Data Initiatives, Nayem Rahman, Fahad Aldhaban

Engineering and Technology Management Faculty Publications and Presentations

There is a great enthusiasm with the prospect of big data among business and industry leaders, academia and researchers. A lot of big data tools and technologies have emerged recently to capture, store, process and analyze big data. One remarkable achievement is that a handful of open source technologies have been introduced by Apache Hadoop Foundation that allows any organization to undertake big data projects. Many big data projects have been implemented during the last few years. This paper explores the benefits achieved with those projects. Big data has been applied in diverse fields including scientific and medical discovery projects, …

Supporting Sustainable Technology Cluster Development: A Performance Measurement Problem, Elizabeth Gibson

Engineering and Technology Management Faculty Publications and Presentations

Managers require metrics to measure organizational performance. However, metrics used by organizations that support technology cluster development are poorly understood in the literature. The most frequently referenced indicator for cluster development is regional economic and jobs data. These macro level indicators are not sufficient to measure the performance inside the cluster, leaving champions and policy makers to struggle with ad-hoc trial and error experimentation. The difficulty in defining and developing a performance measurement system is addressed. This paper lays the groundwork for improved approaches towards measuring the performance of technology cluster initiatives.

Siting A Wind Farm In Oregon: Considering A Hierarchical Decision Model With Four Scenarios, Diane Yates

Engineering and Technology Management Faculty Publications and Presentations

This paper primarily serves two purposes: first, it looks to develop a methodology that takes scenarios and certain hard-to-measure intangibles such as politics, social impact, and even religion; as well as more tangible and measurable variables such as environmental impacts, cost and types of materials, storage and wind turbine technologies, to name a few, that then could be used as input to a decision-making model on where to build a wind farm. The hierarchical decision model (HDM) then analyzes these variables, based on an independent judging panel, in order to come up with a recommendation for the best site on …

Managing Technology Push Through Marketing Testbeds: The Case Of The Hi-Tech Center In Vienna, Austria, Rainer Hasenauer, Charles M. Weber, Peter Filo, Jozef Orgonáš

Engineering and Technology Management Faculty Publications and Presentations

The ‘technology push’ approach to technology development rests on the assumption that if you make it, they will come. This assumption carries significant market risk. The technology may miss its intended market window, or the market that was anticipated at the inception of technology development no longer exists at the time of market release. This paper discusses how the Hi Tech Center in Vienna, Austria, a multi national collaborative effort between industry and universities in Central Europe, helps its clients manage technology push by deploying the marketing testbed approach. After identifying lead users for a client’s technology, it characterizes and …

Transmission Electron Microscopy Characterization Of High-Temperatur Oxidation Of Fe-20cr-5al Alloy Prepared By Focused Ion Beam Technique, Mohammad Dani, Pudji Untoro, Teguh Yulius Surya Panca Putra, Parikin Parikin, Joachim Mayer, Arbi Dimyati

Makara Journal of Technology

The Focused Ion Beam (FIB) technique was applied for cross section preparation of the oxidized alloy for Transmission Electron Microscopy (TEM) study. Prior to preparation, the specimens of Fe-20Cr-5Al alloy sheet were oxidized in air at 1200 oC for 2 minutes, 10 minutes, 2 hours, and 100 hours. The microstructure and elemental composition of the samples were characterized using TEM equipped with an Energy Dispersive X-Ray Spectroscopy (EDX). The Electron Energy Loss Spectroscopy (EELS) was used to determine of the light elements. The TEM investigation reveals remarkable microstructure evolution of the specimens during oxidation which generally exhibit a typical multi-layer …

High Temperature Corrosion Of Aluminized Aisi 4130 Steel With The Different Composition Of Nacl/Na2so4 Deposits, Mohammad Badaruddin, Chaur Jeng Wang, Yudhistyra Saputra, Abu Khalid Rivai

Makara Journal of Technology

The high temperature corrosion of AISI 4130 steel can be increased by hot-dip aluminizing coating. The aluminized steel specimens with the deposit composition of 100/0, 30/70, 50/50, 70/30, and 0/100 (wt.%) NaCl/Na2SO4 were oxidized at 750 °C for 1-49 h periods. According to a parabolic rate constant (kp) value, the aluminized steel with deposit composition of 70/30 NaCl/Na2SO4 shows the highest kp value (3.71 × 10-11 g2cm- 4s-1), later followed by the kp value of 3.35 × 10-11 g2cm-4s-1 for 100/0 and the lowest kp value is 7.731 × 10-12 g2cm-4s-1 for 0/100. Whereas, the kp value for the aluminized …

Effects Of Supplier-Manufacturer Relationships On Supply-Chain Performance Of Manufacturing Industries In Indonesia, Rachmad Hidayat, Khisbullah Hudha, Sabarudin Akhmad

Makara Journal of Technology

The present study describes the relationships between commitment, communication, satisfaction, trust, relationship quality with suppliers, and supply-chain performance. The population of the study was manufacturing companies in Indonesia. Respondents were the chief executive officers or corporate secretaries or the designated managers involved in strategic decision making. Samples were taken by using a proportional area random sampling technique. Structural Equation Modeling (SEM) was used for analysis. Results of both direct and indirect testing of hypothesis indicated two hypotheses of positive and significant effects and nine hypotheses of positive but insignificant effects. Those hypotheses of positive and significant effects were the direct …

A New Method For Simulating Power Flow Density Focused By A Silicon Lens Antenna Irradiated With Linearly Polarized Thz Wave, Catur Apriono, Eko Tjipto Rahardjo, Norihisa Hiromoto

Makara Journal of Technology

A terahertz system uses dielectric lens antennas for focusing and collimating beams of terahertz wave radiation. Linearly polarized terahertz wave radiation has been widely applied in the terahertz system. Therefore, an accurate method for analyzing the power flow density in the dielectric lens antenna irradiated with the linearly polarized terahertz wave radiation is important to design the terahertz systems. In optics, ray-tracing method has been used to calculate the power flow density by a number density of rays. In this study, we propose a method of ray-tracing combined with Fresnel’s transmission, including transmittance and polarization of the terahertz wave radiation …

Stochastic Optimization Of Supply Chain Risk Measures –A Methodology For Improving Supply Security Of Subsidized Fuel Oil In Indonesia, Adinda Yuanita, Andi Noorsaman Sommeng, Anondho Wijonarko

Makara Journal of Technology

Monte Carlo simulation-based methods for stochastic optimization of risk measures is required to solve complex problems in supply security of subsidized fuel oil in Indonesia. In order to overcome constraints in distribution of subsidized fuel in Indonesia, which has the fourth largest population in the world—more than 250,000,000 people with 66.5% of productive population, and has more than 17,000 islands with its population centered around the nation's capital only—it is necessary to have a measurable and integrated risk analysis with monitoring system for the purpose of supply security of subsidized fuel. In consideration of this complex issue, uncertainty and probability …

Thermodynamic Analysis Of Irreversible Heat-Transformers, Niccolo` Giannetti, Arnas Arnas, Andrea Rocchetti, Kiyoshi Saito

Makara Journal of Technology

Absorption heat transformers extend the possibilities for efficient and environment-friendly energy conversion processes. Based on a general thermodynamic model of three-thermal cycles with finite thermal capacity of the heat sources, this paper is intent upon analyzing and optimizing the performance of absorption heat transformers, by including the influence of irreversibility in the analytical expression of the system efficiency. Dimensionless parameters for an overall optimization are defined and a first screening is performed to clarify their influence. Dependence on the main factors is highlighted to suggest how to change them in order to enhance the whole system performance. Under this point …

Financial Analysis And Comparison Of Compact Electric And Gasoline Cars, Jing Jiang, Alexander Blank, Felix Maier, Anjan Bharthepudi

Engineering and Technology Management Faculty Publications and Presentations

In the paper, a PESTLE (political, economic, social, technical, legal, and environmental) analysis is used to conduct an initial evaluation for electric vehicles (EV) and gasoline cars. Furthermore, two cash flow models are created to describe the scenarios of both gasoline and electric car respectively. Based upon the proposed models, the equivalent uniform annual cost (EUAC) methodology is used to calculate the cost during the period of car ownership. Four compact EVs and five compact gasoline cars are selected in the analysis. The results expose that the actual return of federal tax credit impacts the EUAC value. The 50% return …

Exploring The Adoption And Use Of The Smartphone Technology In Emerging Regions: A Literature Review And Hypotheses Development, Fahad Aldhaban, Tugrul Unsal Daim, Robert R. Harmon

Engineering and Technology Management Faculty Publications and Presentations

Users’ acceptance of a new information technology (IT) is a determining factor of its market success. A solid understanding of the users’ adoption process and use behavior enables a more robust definition of user requirements and better market alignment. This is especially important in markets characterized by rapid technological change such as smartphones. The Technology Acceptance Model (TAM) is often used to assess the factors affecting adoption of new technologies. However, TAM models often omit the role of important variables such as human and social factors in the adoption process. In developing markets such as China, cultural and social influences …

Comparison Of Beta Backscatter And X-Ray Fluorescence Methods To Measure Coating Thickness, Sergio Palomo, Bernice Mills

STAR Program Research Presentations

This work compares and assesses the effectiveness of beta backscatter (BB) and x-ray fluorescence (XRF) for measuring the thickness of gold coatings on two substrates: silicon and an iron-nickel alloy. A set of samples of known gold coating thickness, ranging from 0.5 – 4.0 microns, was measured in each case along with the substrate alone. In BB the number of electrons (beta particles from a very small radioactive source, Pm-147 in this case) backscattered from a sample in a fixed time period is counted. The XRF method uses x-rays generated in the sample from a primary x-ray beam of higher …

Design And Fabrication Of Liquid Scintillator Counter, Andrea Calderon Saucedo, John L. Orrell

STAR Program Research Presentations

Pacific Northwest National Laboratory (PNNL) is currently developing an ultra-low background liquid scintillator counter (ULB LSC) in the shallow underground laboratory. At a depth of 35-meters water-equivalent, the underground laboratory has a multi-layered shielding to keep out cosmic-ray induced background. The ULB LSC, which is located in a clean room facility, is a multi-layered design made up of various materials, including plastic scintillator veto panels, borated polyethylene, lead and copper. These layers help lower the contributions of the terrestrial background and intrinsic background, resulting from the impurities present in the materials, to the overall background count rate observed by the …

Radiographic Density Of Selected Materials At Different Thicknesses, Thien Quang Vu-Nguyen, Bernice Mills

STAR Program Research Presentations

X-rays are widely used in medicine and materials science to identify impurities or fractures within the target object. In material science, x-rays can be used to identify the thickness of samples with different material densities. The current method is to collect a radiograph using estimated conditions, evaluate the results, then make changes to the conditions. The residual image can be rescanned making it possible to obtain an image of lower radiographic density. By tabulating or graphing the effects of energy changes and rescans, a more informed choice of conditions is possible.

For this study, six materials were chosen with a …

Effect Of Surface Omniphobicity On Drying By Forced Convection, Madani A. Khan, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Low energy surfaces can strongly repel both oil and water. Recently these surfaces have been fabricated on various substrates including fabric, aluminum, stainless steel and many other materials. In this experiment we explore the use of low energy surface deposition on aluminum alloy, stainless steel and silicon substrates, to enhance the drying rate of liquids removed from the surface by forced convection. We control surface roughness by substrate abrasion and by the growth of Al₂O₃ nanograss to enhance liquid repellence by use of a hierarchical texture. Liquid repellence of the substrates is measured by contact angles of …

Study Of Surface Plasmon Resonance In Metal And Alloy Nanofilms Using Maxwell Description And Metamaterial Simulation In Comsol, Heesoo Park

Graduate Theses - Physics and Optical Engineering

Metamaterials are artificial metallic structures having, possibly, simultaneously negative permittivity and negative permeability which is called a double negative medium. To achieve a visible light range of the metamaterial, the unit cell of the metamaterial units should be 10-200nm. It is a much bigger structure than a size of normal atom. Still, the resolution of fabrication, which is difficult part, should typically be a few nanometers to achieve a nano-level unit. We study Ag thin-film as a convenient candidate for metamaterial over a specific frequency range. Because, the thin film metal is composed of disk shape island structures itself. These …

Ceas E-News 08.2015, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

• Fall Welcome 2015
• Kids learn to program at ECE Raspberry Pi camp
• Dr. Lemmer Receives NSF Award
• Fred Sitkins Set to “Retire” in August
• ECE Welcomes Dr. Pablo Gomez as New Associate Professor