Engineering Commons^™

Review Of Fluorescence Guided Surgery Visualization And Overlay Techniques, Jonathan T. Elliott, Alisha V. Dsouza, Scott C. Davis, Jonathan D. Olson, Keith Paulsen, David Roberts, Brian Pogue

Dartmouth Scholarship

In fluorescence guided surgery, data visualization represents a critical step between signal capture and display needed for clinical decisions informed by that signal. The diversity of methods for displaying surgical images are reviewed, and a particular focus is placed on electronically detected and visualized signals, as required for near-infrared or low concentration tracers. Factors driving the choices such as human perception, the need for rapid decision making in a surgical environment, and biases induced by display choices are outlined. Five practical suggestions are outlined for optimal display orientation, color map, transparency/alpha function, dynamic range compression, and color perception check.

A Numerical Comparison Of Precipitating Turbulent Flows Between Large-Eddy Simulation And One-Dimensional Turbulence, Alex W. Abboud, Ben B. Schroeder, Tony Saad, Sean T. Smith, Derek D. Harris, David O. Lignell

Faculty Publications

This study presents the results of computational fluid dynamics simulations of a multiphase, reacting, turbulent mixing layer in an idealized geometry. The purpose is to compare large-eddy simulation (LES) to one-dimensional turbulence (ODT) and examine the trends of the flow under differing mixing conditions. Aqueous streams are mixed together to precipitate polymorphs of calcium carbonate. The polymorphs of calcium carbonate are tracked numerically using population balance equations (PBE). Each PBE contains all of the relevant physical models to track the particle evolution including nucleation, growth, and aggregation. A simple subgrid mixing model that is convenient for use with PBEs was …

Towards Continuous Aqueous Two-Phase Extraction (Catpe), Bettina Bommarius, Andres Bommarius, Irene Kaplanow, Julianne Merz, Gerhard Schembecker

Integrated Continuous Biomanufacturing II

Aqueous Two-Phase Extraction (ATPE) in mixer-settlers offers a gentle and biocompatible environment to separate proteins from complex mixtures. We have developed an aqueous two-phase system with inexpensive and biocompatible PEG 1500 or 4000 and ammonium citrate. We have purified several dehydrogenases [1] to near homogeneity after forward extraction into a PEG-heavy top phase at pH > 9 and back extraction into a bottom phase at pH 4-6; in selected cases, we were able to obtain pure protein in the bottom phase without forward extraction into the top phase. We have scaled up the PEG 1500/4000-ammonium citrate to a 5-10 L scale, …

Opening Social | Biological Engineering, Usu College Of Engineering

College of Engineering News

Welcome back AGGIES! Here is to hoping your first week has been going well.

Local Time-Averaged Gas Holdup In Fluidized Bed Reactor Using Gamma Ray Computed Tomography Technique (Ct), Abdelsalam Efhaima, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Many Invasive and Non-Invasive Techniques Have Been Used to Analyze the Hydrodynamics of Fluidized Beds. in This Study, the Effect of Superficial Gas Velocity and Bed Particle Density on the Hydrodynamics of Gas–solid Fluidized Beds Was Investigated by using a Cylindrical Plexiglas Fluidized Bed Column, 14 Cm in Diameter. Air at Room Temperature Was Used as the Fluidizing Gas and Two Different Geldart Type-B Particles Were Used: Glass Beads and Copper Particles with Material Densities of 2.5 and 5.3 G/cm3, Respectively, with the Same Size Particle, 210 µm. to Measure the Time-Averaged Cross-Sectional Gas and Solid Holdup Distribution, Gamma Ray …

Tailoring Optical Complex Field With Spiral Blade Plasmonic Vortex Lens, Guanghao Rui, Qiwen Zhan, Yiping Cui

Electro-Optics and Photonics Faculty Publications

Optical complex fields have attracted increasing interests because of the novel effects and phenomena arising from the spatially inhomogeneous state of polarizations and optical singularities of the light beam. In this work, we propose a spiral blade plasmonic vortex lens (SBPVL) that offers unique opportunities to manipulate these novel fields. The strong interaction between the SBPVL and the optical complex fields enable the synthesis of highly tunable plasmonic vortex. Through theoretical derivations and numerical simulations we demonstrated that the characteristics of the plasmonic vortex are determined by the angular momentum (AM) of the light, and the geometrical topological charge of …

Creation And Analysis Of Checklists To Improve Raquet Stringing Performance In Tennis Warehouse, Alston S. Nguyen

Industrial and Manufacturing Engineering

Tennis Warehouse has a need to increase the supply of strung racquets and man hours to complete these strung racquets over the course of a year. That is, the demand can be increased by up to 4 times its average load during certain hectic parts of the year (professional tournaments, holidays, and competitive seasons). Not meeting this demand can lead to upset customers, unnecessary waste and replacing of rushed items and shipping costs, and a discouraged customer service representative workforce. The objective of this project is to use a set of checklists to address this problem and attempt to increase …

Using Arm 4 Supplement 2 (Scsi Presentation), Charles Mitchell

Other Resources

In December 2014 the Government Contracts Committee for Construction, (GCCC), published its Report on the Review of the Performance of the Public Works Contract. The report proposed 4 interim measures to amend the Public Works Contracts.

As a result it has become necessary to provide a fully measured Bill of Quantities, in line with the Agreed Rules of Measurment 4, for specialist sub-contractors. The emphasis of this presentation was the use of both the Agreed Rules of Measurement 4 and the Supplement 2 in the preparation of fully measured Bills of Quantities as required by the Irish Public Works Contracts …

Household Bush Burning Practice And Related Respiratory Symptoms In Grenada, The Caribbean, Muge Akpinar-Elci, Kareem Coomansingh, James Blando, Larissa Mark

Center for Global Health Publications

The practice of household bush burning in Grenada occurs frequently, though it is not well documented. The effects of the emissions from bush burning on respiratory health of the population have never been researched in Grenada. The goal of the study was to measure the frequency of bush burning and to investigate the relationship between bush burning practice and respiratory health in Grenada. In this cross-sectional study, a questionnaire was used to gather information from households in the parishes of St. George and St. Andrew, Grenada. In total, 225 participants were recruited and their responses on household bush burning and …

Extended Use Of Limestone Fines In Various Concretes, Gilson Lomboy, Fatih Bektas, Kejin Wang

Henry M. Rowan College of Engineering Departmental Research

Limestone fines are increasingly used in cement and concrete for improved material properties and sustainability. This paper presents recent research at Iowa State University on utilization of limestone fines in concrete. It includes the beneficial uses of limestone fines in: (1) limestone blended Portland cement; (2) SFSCC (semi-flowable self-consolidating concrete); and (3) HPC (high performance concrete). The research results show that using 5%~10% of limestone fines to replace for Type IP cement (with 25% fly ash) increased mortar strength. Well-designed SFSCC with 25% limestone fines (by mass of cementitious materials) displayed desirable rheological and mechanical properties required for slip-forming construction. …

Ceas E-News - 09.2015, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

• WMU and Fuzhou University promote globalization
• Certification program promotes college mission
• National Science Foundation grant
• Defense Advanced Research Projects Agency grant
• Upcoming events

Green Supply Chain Management In Chinese Electronic Manufacturing Organisations; An Analysis Of Senior Managements’ Perceptions., Eoin Plant, Yusen Xu, Gareth R.T. White

Articles

Green supply chain management and reverse logistics has emerged as a key area of research interest. Recent environmental regulations have also stimulated interest in this field. However, information sharing is a pre- requisite to efficient and effective logistics utilisation. Manufacturing organisations in China were argued to be 10-20 years behind their Western counterparts in relation to information sharing in their supply chains (Li and Yuan, 2009). This barrier needs to be addressed if China is going to maintain and grow its manufacturing position in the world, attempt to address green supply chain issues and their negative externalities. A systematic literature …

Sedimentandnutrient Fluxes In The River Bandon & Owenabue Catchments, Ireland, Joseph R. Harrington, John Gamble, S. Harrington

Conference Papers

Fine sediment plays a key role in the transport of contaminants in rivers and quantification of suspended sediment and nutrient flux is important to understand and manage river catchments in the context of the EU WFD (2000/60/EC). For Ireland, work in this area has been very limited and annual fluxes based on continuous data have not been presented. European studies have identified Ireland as having a paucity of sediment and sediment associated pollutant concentration data. This paper presents work undertaken in recent years for sediment and nutrient fluxes based on continuous data on two river catchments in the South Western …

A Constraint Language For Static Semantic Analysis Based On Scope Graphs, Hendrik Van Antwerpen, Pierre Néron, Andrew Tolmach, Eelco Visser, Guido Wachsmuth

Computer Science Faculty Publications and Presentations

In previous work, we introduced scope graphs as a formalism for describing program binding structure and performing name resolution in an AST-independent way. In this paper, we show how to use scope graphs to build static semantic analyzers. We use constraints extracted from the AST to specify facts about binding, typing, and initialization. We treat name and type resolution as separate building blocks, but our approach can handle language constructs—such as record field access—for which binding and typing are mutually dependent.We also refine and extend our previous scope graph theory to address practical concerns including ambiguity checking and support for …

Causes And Trends In Maintenance-Related Accidents In Faa-Certified Single Engine Piston Aircraft, Douglas Boyd, Alan Stolzer

Publications

The accident rate for general aviation remains high. While most general aviation accident studies have been pilot-focused, there is little research on the involvement of aircraft maintenance errors. We undertook a study to answer this question.

The Microsoft Access database was queried for accidents occurring between 1989 and 2013 involving single engine piston airplanes operating under 14CFR Part 91. Pearson Chi-Square, Fisher’s Exact Test, and Poisson probability were used in statistical analyses.

The rate of maintenance-related general aviation accidents was 4.3 per million flight hours for the 1989–1993 period and remained unchanged for the most recent period (2009–2013). Maintenance errors …

Bs News September/October

Building Services Engineering

No abstract provided.

An Improved Dynamic Particle Packing Model For Prediction Of The Microstructure In Porous Electrodes, Chien-Wei Chao

Theses and Dissertations

The goal of this work is to develop a model to predict the microstructure of Li-ion batteries, specifically focusing on the cathode component of the batteries. This kind of model has the potential to assist researchers and battery manufacturers who are trying to optimize the capacity, cycle life, and safety of batteries. Two dynamic particle packing (DPP) microstructure models were developed in this work. The first is the DPP1 model, which simulates the final or dried electrode structure by moving spherical particles under periodic boundaries using Newton's laws of motion. The experience derived from developing DPP1 model was beneficial in …

Collapse Vulnerability And Fragility Analysis Of Substandard Rc Bridges Rehabilitated With Different Repair Jackets Under Post-Mainshock Cascading Events, Mostafa Fakharifar, Genda Chen, Ahmad Dalvand, Anoosh Shamsabadi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Past earthquakes have signaled the increased collapse vulnerability of mainshock-damaged bridge piers and urgent need of repair interventions prior to subsequent cascading hazard events, such as aftershocks, triggered by the mainshock (MS). The overarching goal of this study is to quantify the collapse vulnerability of mainshock-damaged substandard RC bridge piers rehabilitated with different repair jackets (FRP, conventional thick steel and hybrid jacket) under aftershock (AS) attacks of various intensities. The efficacy of repair jackets on post-MS resilience of repaired bridges is quantified for a prototype two-span single-column bridge bent with lap-splice deficiency at column-footing interface. Extensive number of incremental dynamic …

Petrology, Palynology, And Geochemistry Of Gray Hawk Coal (Early Pennsylvanian, Langsettian) In Eastern Kentucky, Usa, James C. Hower, Courtland F. Eble, Jennifer M. K. O'Keefe, Shifeng Dai, Peipei Wang, Panpan Xie, Jingjing Liu, Colin R. Ward, David French

Center for Applied Energy Research Faculty and Staff Publications

This study presents recently collected data examining the organic petrology, palynology, mineralogy and geochemistry of the Gray Hawk coal bed. From the Early Pennsylvanian, Langsettian substage, Gray Hawk coal has been mined near the western edge of the eastern Kentucky portion of the Central Appalachian coalfield. While the coal is thin, rarely more than 0.5-m thick, it has a low-ash yield and a low-S content, making it an important local resource. The Gray Hawk coal palynology is dominated by Lycospora spp., and contains a diverse spectrum of small lycopods, tree ferns, small ferns, calamites, and gymnosperms. The maceral assemblages show …

Design Of Push–Pull System To Control Diesel Particular Matter Inside A Dead-End Entry, Yi Zheng, Magesh Thiruvengadam, Hai Lan, Jerry C. Tien

Mining Engineering Faculty Research & Creative Works

Diesel particulate matter (DPM) is considered to be carcinogenic after prolonged exposure. With more diesel-powered equipment used in underground mines, miners' exposure to DPM has become an increasing concern. This paper used computational fluid dynamics method to study the DPM dispersion in a dead-end entry with loading operation. The effects of different push–pull ventilation systems on DPM distribution were evaluated to improve the working conditions for underground miners. The four push–pull systems considered include: long push and short pull tubing; short push and long pull tubing, long push and curved pull tubing, and short push and curved pull tubing. A …

Experimental Investigations Of Dusty Spacecraft Charging At The Lunar Terminator, Kevin Chou, William Yu, Daoru Frank Han, Joseph J. Wang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An experimental investigation is conducted to understand the I-V characteristics and floating potential of a surface covered by varying amounts of dust in a plasma environment similar to that at the lunar terminator. I-V curves are measured to determine dust coverage effects on surface charging, and a non-contacting electrostatic voltmeter is used to measure dust surface charging. Results show that as dust coverage increases, the electric field created between the dust surface layer and conducting surface layer increases the possibility of arcing and breakdown.

Enhanced Structural Color Generation In Aluminum Metamaterials Coated With A Thin Polymer Layer, F. Cheng, Xiaodong Yang, D. Rosenmann, L. Stan, D. Czaplewski, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Ultrasensitive Detection And Characterization Of Molecules With Infrared Plasmonic Metamaterials, F. Cheng, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Clustering Data Of Mixed Categorical And Numerical Type With Unsupervised Feature Learning, Dao Lam, Mingzhen Wei, Donald C. Wunsch

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Mixed-type categorical and numerical data are a challenge in many applications. This general area of mixed-type data is among the frontier areas, where computational intelligence approaches are often brittle compared with the capabilities of living creatures. In this paper, unsupervised feature learning (UFL) is applied to the mixed-type data to achieve a sparse representation, which makes it easier for clustering algorithms to separate the data. Unlike other UFL methods that work with homogeneous data, such as image and video data, the presented UFL works with the mixed-type data using fuzzy adaptive resonance theory (ART). UFL with fuzzy ART (UFLA) obtains …

Directional Ringlet Intensity Feature Transform For Tracking, Evan Krieger, Paheding Sidike, Theus H. Aspiras, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

The challenges existing for current intensity-based histogram feature tracking methods in wide area motion imagery include object structural information distortions and background variations, such as different pavement or ground types. All of these challenges need to be met in order to have a robust object tracker, while attaining to be computed at an appropriate speed for real-time processing. To achieve this we propose a novel method, Directional Ringlet Intensity Feature Transform (DRIFT), that employs Kirsch kernel filtering and Gaussian ringlet feature mapping. We evaluated the DRIFT on two challenging datasets, namely Columbus Large Image Format (CLIF) and Large Area Image …

Modeling And Test Of The Efficiency Of Electronic Speed Controllers For Brushless Dc Motors, Clayton R. Green

Master's Theses

Small electric uninhabited aerial vehicles (UAV) represent a rapidly expanding market requiring optimization in both efficiency and weight; efficiency is critical during cruise or loiter where the vehicle operates at part power for up to 99% of the mission time. Of the four components (battery, motor, propeller, and electronic speed controller (ESC)) of the electric propulsion system used in small UAVs, the ESC has no accepted performance model and almost no published performance data. To collect performance data, instrumentation was developed to measure electrical power in and out of the ESC using the two wattmeter method and current sense resistors; …

Characterization Of Electrophorectic Separations On A Cellulose Paper-Microfluidic Chip, Kyle Robert Fast

Master's Theses

The purpose of this thesis project is to demonstrate the ability to utilize electrophoresis in a cellulose paper microfluidic chip to manipulate charged particles. Materials were selected and a manufacturing protocol was created to successfully apply the electric field onto the paper chip. Experiments were performed to characterize the separation rates for charged, colorimetric dye, Orange G in the membrane as a function of an applied electric field, dye concentration, and distance traveled. The experiments confirmed that the electric field can be applied to the chip and particle separation rates were characterized. Next, the determined rates results were used to …

Electronic Signatures: Review And Analysis, Bryan Gibson

Kentucky Transportation Center Technical Assistance Report

Electronic signatures, or e-signatures, are an increasingly ubiquitous component of a rapidly digitizing world. Compared to traditional paper signature, e-signatures have emerged as a viable, potentially more efficient method of entering into a contract. An e-signature can be thought of as an electronic symbol or marking associated with the signer. It acts as a signature and functions in lieu of a manual paper signature. This technical assistance report briefly reviews relevant Kentucky statutes and guidelines regarding e-signatures and public recordkeeping as well as applicable federal law. Following this, the report presents conclusions and points for continued discussion. Relevant statues and …

Evaluation Of Deterioration Of Structural Concrete Due To Chloride Intrusion And Other Damaging Mechanisms, Sudhir Palle, Brian K. Howell, Theodore Hopwood Ii, Bobby W. Meade

Kentucky Transportation Center Research Report

Kentucky's bridges continue to age and experience distress. The intrusion of chlorides into concrete remains the primary mechanism for deterioration. It leads to reinforcing steel corrosion that damages the adjoining concrete structure. This study found problematic chloride concentrations in Kentucky concrete bridge elements (decks, pier caps, abutments). Chloride levels have been found at concentrations sufficient to initiate reinforcing steel corrosion. In some cases, chloride concentrations were sufficient to cause accelerated corrosion and produce major section loss of reinforcing steel. Advanced stages of corrosion such as these typically require costly repairs and maintenance to extend the service life of bridges.

Field …

Vanadium Oxide Thin-Film Variable Resistor-Based Rf Switches, Kuanchang Pan, Weisong Wang, Eunsung Shin, Kelvin Freeman, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

Vanadium dioxide (VO2) is a unique phase change material (PCM) that possesses a metal-to-insulator transition property. Pristine VO2 has a negative temperature coefficient of resistance, and it undergoes an insulator-to-metal phase change at a transition temperature of 68°C. Such a property makes the VO2 thin-film-based variable resistor (varistor) a good candidate in reconfigurable electronics to be integrated with different RF devices such as inductors, varactors, and antennas. Series single-pole single-throw (SPST) switches with integrated VO2 thin films were designed, fabricated, and tested. The overall size of the device is 380 μm × 600 μm. The SPST switches were fabricated on …