Engineering Commons^™

Biogeography-Based Optimization Of A Variable Camshaft Timing System, George Thomas, Daniel J. Simon, John Michelini

Electrical and Computer Engineering Faculty Publications

Automotive simulations often prohibit the use of traditional optimization techniques because these simulations are complex and computationally expensive. These two qualities motivate the use of evolutionary algorithms and meta-modeling techniques respectively. In this work, we apply biogeography-based optimization (BBO) to optimize radial basis function (RBF)-based lookup table controls of a variable camshaft timing system for fuel economy. Also, we reduce computational search effort by finding an effective parameterization of the problem, optimizing the parameters of the BBO algorithm for the problem, and estimating the cost of a portion of the candidate solutions in BBO with design and analysis of computer …

Design And Validation Of A Complex Loading Whole Spinal Segment Bioreactor, Amanda Marie Beatty

Theses and Dissertations

Intervertebral disc (IVD) degeneration is a prevalent health problem that is highly linked to back pain. To understand the disease and tissue response to therapies, ex-vivo whole IVD organ culture systems have recently been introduced. The goal of this study was to develop and validate a whole spinal segment culturing system that loads the disc in complex loading similar to the in-vivo condition, while preserving the adjacent endplates and vertebral bodies. The complex loading applied to the spinal segment was achieved with three pneumatic cylinders. The pneumatic cylinders were rigidly attached to two triangular alumni plates at each corner, comprising …

Little Bear And Blacksmith Fork Rivers Environmental Flows: Background Report, Bio-West, Inc.

Civil and Environmental Engineering Faculty Publications

This report describes existing information and first steps related to developing environmental flow recommendations for the Little Bear and Blacksmith Fork Rivers in Cache County, Utah. This project was undertaken by The Nature Conservancy (TNC) in partnership with Trout Unlimited (TU), Utah Division of Wildlife Resources (UDWR), Cache County, and Utah State University (USU). Both rivers have been identified as conservation priorities, primarily for Bonneville cutthroat trout (BCT) and their riparian and aquatic systems.

Golden Bite Mouth Guard, Caitlin M. Braun, Austin Fiegel, Eric Tyra, Alexandra Michaels

Mechanical Engineering Design Project Class

Dr. Kirk Quigless has designed the Golden Bite™ athletic mouth guard to properly align the jaw. Literature suggests that the proper alignment of the jaw will provide users with increased performance gains. Accurately determining these gains without bias is a difficult task. Dr. Kirk Quigless needs to quantify the performance gains from his mouth guard. The portable device designed in the Golden Bite™ Mouth Guard Project will record the force exerted by an individual over a period of time. From this data, Dr. Kirk Quigless can determine the change in force output from individuals with and without the mouth guard, …

Commuting Moped For Mems411, Jon Okenfuss, Charlie Mellinger, Ethan Bermudez

Mechanical Engineering Design Project Class

Our project is to design and build a moped that can be used to commute from home to the Washington University campus, and then be used as a pedal powered transport for travel on the campus grounds.

Saran Wrap 2: Clip Handling Device, Alex Arteaga, Brian Lockwood, Cameron Adams

Mechanical Engineering Design Project Class

The common household Saran Wrap has been in production since 1933. A common problem comes in the handling of the plastic sheet after being torn from the roll. Corners frequently fold on themselves, the sheet bunches up, and renders some pieces useless. Our objective was to create a device along with a system to eliminate these problems, without compromising the simplicity and speed of the original box cutter.

Moped Ii - Frankenbike, Nkiru Udenze, Sade Odumuye, Jake Gaskill

Mechanical Engineering Design Project Class

A “street legal” traditional moped (functions with both motorized and pedal components) was set forth as the basis of our design problem. Additional commuter needs of rain protection and storage capabilities were chosen for our design niche. Some collapsible components were developed as well.

Whiteboard Marker Dispenser, Ellen Toennies, Nicole Kawamoto, Aditya Sharma

Mechanical Engineering Design Project Class

In an effort to provide a constant supply of functioning markers to classrooms, labs, and other student spaces around campus, we designed and built a device to incentivize the storage, use, and return of whiteboard markers. Our Whiteboard Marker Dispenser offers customers a visually appealing, interactive manner of ensuring that the collaborative nature of the learning experience will not be hindered by a lack of resources.

Plate Pouring Iv, Alexander F. Kwakye, Carey D. Haefele, Arjay Parhar

Mechanical Engineering Design Project Class

From a high school biology class to a small research facility, this machine will cheaply (relative to its competitors) automatically pour a layer of agar into a large number of Petri dishes in order to grow bacteria micro-cultures. Designed to be powered within a fume hood, the user simply needs to open up the containment facility, insert stacks of Petri dishes, and pour in a batch of premade agar. Within the hour, approximately 120 Petri dishes should be layered and ready for further experimentation.

The Design Of A Paper Launching Device, Nicholas J. Cooley, Jake Michael Emmerick, Matthew Ludwig

Mechanical Engineering Design Project Class

The American Society of Mechanical Engineers has challenged us to create a machine that forms a projectile from a single sheet of paper, and then launches that projectile. The success of the device will be measured by how far the projectile is effectively propelled, how straight the projectile is propelled, and how much volume the device takes up when packaged.

Mems 411 - Self-Leveling Drone, Sarah Schubert, Anne Shellum, Andreea Stoica, Jillian Rose

Mechanical Engineering Design Project Class

1.1 The objective of this senior design project was to design and build an aerial drone with a landing gear system that would allow leveling and take off from a sloped terrain. The drone should be able to level on a slope with a maximum incline of 20 degrees and the leveling process should not exceed 30 seconds. In addition, the leveling system must be automatic and deployed using the flight controller.

A Forecasting Tool For Predicting Australia's Domestic Airline Passenger Demand Using A Genetic Algorithm, Panarat Srisaeng, Glenn Baxter, Steven Richardson, Graham Wild

Research outputs 2014 to 2021

This study has proposed and empirically tested for the first time genetic algorithm optimization models for modelling Australia’s domestic airline passenger demand, as measured by enplaned passengers (GAPAXDE model) and revenue passenger kilometres performed (GARPKSDE model). Data was divided into training and testing datasets; 74 training datasets were used to estimate the weighting factors of the genetic algorithm models and 13 out-of-sample datasets were used for testing the robustness of the genetic algorithm models. The genetic algorithm parameters used in this study comprised population size (n): 200; the generation number: 1,000; and mutation rate: 0.01. The modelling results have shown …

Examining Unmanned Aerial System Threats & Defenses: A Conceptual Analysis, Ryan J. Wallace, Jon M. Loffi

International Journal of Aviation, Aeronautics, and Aerospace

The integration of unmanned aerial systems (UAS) into the already complex global aviation system presents new and unique hazards. While many studies have addressed the potential safety concerns of UAS integration, little research has been dedicated to the potential security implications. This study sought to identify potential uses and adaptations of civil UAS systems as weapons of terrorism or crime and potential UAS defenses. Researchers examined 68 academic studies, unclassified government reports, and news articles using Conceptual Analysis to systematically capture and categorize various threats. Using the collected data, researchers developed a UAS threat model for categorically evaluating potential threats. …

Understanding Interactions Between Drivers And Pedestrian Features At Signalized Intersections, Pei-Sung Lin, Achilleas Kourtellis, Zhenyu Wang, Rui Guo

CUTR Faculty Journal Publications

Florida experienced serious pedestrian safety problems and had the highest pedestrian fatality rate in the U.S. from 2008–2011. Pedestrian safety at signalized intersections is the most serious concern due to frequent and severe conflicts between vehicles and pedestrians. Pedestrian features directly related to pedestrian safety are used to increase driver compliance behaviors and reduce vehicle-pedestrian conflicts. This project aimed to explore driver behaviors at signalized intersections with four identified pedestrian features—“STOP HERE ON RED,” “NO TURN ON RED,” “TURNING VEHICLES YIELD TO PEDESTRIANS,” and “RIGHT ON RED ARROW AFTER STOP” signs—by using an innovative safety data source, the Strategic Highway …

Noninvasive Assessment Of Photoreceptor Structure And Function In The Human Retina, Robert Francis Cooper

Dissertations (1934 -)

The human photoreceptor mosaic underlies the first steps of vision; thus, even subtle defects in the mosaic can result in severe vision loss. The retina can be examined directly using clinical tools; however these devices lack the resolution necessary to visualize the photoreceptor mosaic. The primary limiting factor of these devices is the optical aberrations of the human eye. These aberrations are surmountable with the incorporation of adaptive optics (AO) to ophthalmoscopes, enabling imaging of the photoreceptor mosaic with cellular resolution. Despite the potential of AO imaging, much work remains before this technology can be translated to the clinic. Metrics …

Anaerobic Membrane Bioreactors To Treat Municipal Wastewater At Ambient Temperatures, Matthew D. Seib

Dissertations (1934 -)

Anaerobic biotechnology is viewed as a sustainable alternative to aerobic biotechnology for municipal wastewater recovery. However, anaerobic processes have not been successful in cold climates. Past examples have not been able to meet low organic effluent concentrations, or have failed due to biomass washout resulting from low temperature operation and short hydraulic residence time. Recently, the anaerobic membrane bioreactor (AnMBR) has been shown to achieve low effluent organic concentrations and maintain stable anaerobic biomass. However, shortcomings have included high energy demands for membrane operation and poor understanding of microbial community structures within AnMBRs. This dissertation describes efforts to improve AnMBRs …

A Semantics-Based Approach To Construction Cost Estimating, Mehrdad Niknam

Dissertations (1934 -)

A construction project requires collaboration of different organizations such as owner, designer, contractor, and resource suppliers. These organizations need to exchange information to improve their teamwork. Understanding the information created in other organizations requires specialized human resources. Construction cost estimating is one of the processes that requires information collected from several sources including a building information model (BIM) created by designers, estimating assembly and work item information maintained by contractors, and construction resource cost information provided by resource suppliers. Currently, it is not easy for computers to integrate the information for construction cost estimating over the Internet. This study discusses …

Health Condition Monitoring And Fault-Tolerant Operation Of Adjustable Speed Drives, Jiangbiao He

Dissertations (1934 -)

Adjustable speed drives (ASDs) have been extensively used in industrial applications over the past few decades because of their benefits of energy saving and control flexibilities. However, the wider penetration of ASD systems into industrial applications is hindered by the lack of health monitoring and fault-tolerant operation techniques, especially in safety-critical applications. In this dissertation, a comprehensive portfolio of health condition monitoring and fault-tolerant operation strategies is developed and implemented for multilevel neutral-point-clamped (NPC) power converters in ASDs. Simulations and experiments show that these techniques can improve power cycling lifetime of power transistors, on-line diagnosis of switch faults, and fault-tolerant …

Computational Approaches For Remote Monitoring Of Symptoms And Activities, Ferdaus Kawsar

Dissertations (1934 -)

We now have a unique phenomenon where significant computational power, storage, connectivity, and built-in sensors are carried by many people willingly as part of their life style; two billion people now use smart phones. Unique and innovative solutions using smart phones are motivated by rising health care cost in both the developed and developing worlds. In this work, development of a methodology for building a remote symptom monitoring system for rural people in developing countries has been explored. Design, development, deployment, and evaluation of e-ESAS is described. The system’s performance was studied by analyzing feedback from users. A smart phone …

Biomechanical Characerization And Evaluation Of Conservative Clubfoot Correction, Tamara Loren Cohen

Dissertations (1934 -)

Congential talipes equinovarus, or clubfoot, affects approximately 200,000 newborns worldwide each year and presents with equinovarus of the hindfoot, as well as cavus and adduction of the midfoot. In addition to bone malformation and displacement, soft tissue contractures encapsulate the medial and posterior aspects of the affected foot. The Ponseti method is a conservative treatment that progressively repositions the clubfoot through weekly casting, followed by bracing. Concerns exist regarding the variability in outcomes, resistance to treatment, and risk of relapse, which occur in approximately 10% of the population. Potential factors contributing to variability and resistant clubfoot include cast material performance, …

The Contribution Of Syntrophic Fatty-Acid Degrading Microbial Communities To Anaerobic Digester Function And Stability, Prince Peter Mathai

Dissertations (1934 -)

Anaerobic digestion (AD), the conversion of complex organic matter to methane, occurs through a series of reactions mediated by different guilds of microorganisms. AD process imbalances, such as organic overload or high organic loading rates (OLR), can result in the accumulation of volatile fatty acids (VFA) e.g., propionate, which must be degraded to maintain stable reactor function. VFAs are metabolized by syntrophic fatty-acid degrading bacteria (SFAB) in association with methanogenic archaea (collectively, syntrophic microbial communities, SMC). Despite their indispensable role in AD, little is known about the ecology of SFAB, especially under stressed conditions. To facilitate ecological studies, four quantitative …

Alagebrium Inhibits Neointimal Hyperplasia And Restores Distributions Of Wall Shear Stress By Reducing Downstream Vascular Resistance In Obese And Diabetic Rats, Hongfeng Wang, Dorothee Weihrauch, Judy R. Kersten, Jeffrey M. Toth, Anthony G. Passerini, Anita Rajamani, Sonja Schrepfer, John F. Ladisa Jr.

Biomedical Engineering Faculty Research and Publications

Mechanisms of restenosis in type 2 diabetes mellitus (T2DM) are incompletely elucidated, but advanced glycation end-products (AGEs)-induced vascular remodeling likely contributes. We tested the hypothesis that AGEs-related collagen cross-linking (ARCC) leads to increased downstream vascular resistance (DVR), and altered in-stent hemodynamics, thereby promoting neointimal hyperplasia (NH) in T2DM. We proposed that decreasing ARCC with ALT-711 (Alagebrium) would mitigate this response. Abdominal aortic stents were implanted in Zucker lean (ZL), obese (ZO), and diabetic (ZD) rats. Blood flow, vessel diameter, and wall shear stress (WSS) were calculated after 21 days, and NH was quantified. Arterial segments (aorta, carotid, iliac, femoral, arterioles) …

Mattrack: A Matlab-Based Quantitative Image Analysis Platform For Investigating Real-Time Photo-Converted Fluorescent Signals In Live Cells, Jane Courtney, Elena Woods, Dimitri Scholz, William Hall, Virginie Gautier

Articles

We introduce here MATtrack, an open source MATLAB-based computational platform developed to process multi-Tiff files produced by a photo-conversion time lapse protocol for live cell fluorescent microscopy. MATtrack automatically performs a series of steps required for image processing, including extraction and import of numerical values from Multi-Tiff files, red/green image classification using gating parameters, noise filtering, background extraction, contrast stretching and temporal smoothing. MATtrack also integrates a series of algorithms for quantitative image analysis enabling the construction of mean and standard deviation images, clustering and classification of subcellular regions and injection point approximation. In addition, MATtrack features a simple user …

The Professional Constructor, Full Issue, Volume 39, Number 02

The Professional Constructor

No abstract provided.

Examining The Relationship Between Leadership Decision Making Styles And Personality Type Within The Department Of Defense, Antoine Lamont Prince Sr.

Engineering Management & Systems Engineering Theses & Dissertations

Leadership is perhaps the single most important function within the Department of Defense. While the old cliché “everyone is a leader regardless of position” may hold moral meaning, personnel in leadership positions are key. Under the umbrella of leadership is decision making. What leadership is to an organization, decision making is to leadership. Yet, despite this knowledge, unsound decisions are readily conducted. There are various theories as to why this holds true, one of which is personality type. Research however, shows that there is a limited amount of relevant knowledge to determine if there is in fact a …

A Risk Assessment Of The Impacts Of Coastal Flooding And Sea Level Rise On The Existing And New Pump Stations 113, Norfolk, Va, David A. Pezza

Civil & Environmental Engineering Theses & Dissertations

The author assessed the risk to a wastewater pump station and a planned replacement located nearby due to coastal flooding and rising sea levels. The locations for the pump stations are in the Larchmont neighborhood by the Lafayette River tidal estuaries in Norfolk, Virginia. The Lafayette River is a tributary to the Elizabeth River, which flows to the Chesapeake Bay. The low-lying areas along the river are subject to coastal surges caused by tropical and extra-tropical storms that flood the bay.

The region is considered one of the urban areas most exposed to the accelerating rate of rising sea levels. …

Comparing Nutrient Recovery Via Rapid (Flash Hydrolysis) And Conventional Hydrothermal Liquefaction Processes For Microalgae Cultivation, Caleb Richard Talbot

Civil & Environmental Engineering Theses & Dissertations

Algal biofuels have the potential to provide a scalable source of renewable fuels in the near future. The high nutrient use in algae cultivation and its recovery and recycling is one of the challenges that may limit the scalability and sustainability of algal biofuels. The present study evaluates the use of Hydrolysate obtained after Flash Hydrolysis (FH) of Scenedesmus at 280 C as a nutrient source for microalgae cultivation. FH Hydrolysate nutrient recycling was compared with low temperature batch Hydrothermal Liquefaction (HTL) nutrient recycling. Oocystis and Scenedesmus were cultivated using Hydrolysate as a partial phosphorous (P) and nitrogen (N) source. …

Experimental And Predicted Behavior Of Frp Beam-Columns Including Retrofitting, Ali Al-Huazy

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the outcome of a theoretical and experimental study of Fiber Reinforce Polymer (FRP) beam-columns with uniaxial bending and including retrofitting. The research involved the design and fabrication of a testing apparatus which was then used for a series of beam-column tests. Three different types of beam-column cross sections were used, namely, channel section, I-section, and square tube section. Six non-retrofitted beam-columns were tested in addition to two retrofitted ones. The members were subjected to an eccentric vertical load applied through a lever arm generating gradually increasing axial load and uniaxial bending moment up to the maximum load. …

Dynamic Project Time And Cost Evaluation Under The Combined Influence Of Contract, Quality, And Uncontrollable Change, Thomas V. Hammock

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation proposes a method that quantifies the dynamics caused by disruptions due to multiple changes that can occur during the progression of a large scale project. To begin, equations consisting of multiple parallel event sequences are derived that define the relationship between individual process events and the final project completion time. Matrix notation and a precedence matrix concept are used in this derivation to produce equations that are best suited for computer programming applications. This relationship is the foundation upon which the equations are built to calculate the variation impact on each event of a large scale project. Pursuing …

Social Signal Processing For Real-Time Situational Understanding: A Vision And Approach, Kasthuri Jeyarajah, Shuchao Yao, Raghava Muthuraju, Archan Misra, Geeth De Mel, Julie Skipper, Tarek Abdelzaher, Michael Kolodny

Research Collection School Of Computing and Information Systems

The US Army Research Laboratory (ARL) and the Air Force Research Laboratory (AFRL) have established a collaborative research enterprise referred to as the Situational Understanding Research Institute (SURI). The goal is to develop an information processing framework to help the military obtain real-time situational awareness of physical events by harnessing the combined power of multiple sensing sources to obtain insights about events and their evolution. It is envisioned that one could use such information to predict behaviors of groups, be they local transient groups (e.g., protests) or widespread, networked groups, and thus enable proactive prevention of nefarious activities. This paper …