Engineering Commons^™

Exploring Individual Differences In Workload Assessment, Danielle K. Boeke

Theses and Dissertations

Air Force missions continue to increase in complexity often imposing higher levels of task load from cognitive tasks on the operators. This increased task load manifests itself in increased cognitive workload and potentially derogated performance. While cognitive workload has been studied for decades, recent advances in objective workload models and physiology monitoring have the potential to provide a more robust understanding of workload, potentially allowing systems to adaptively employ automation to maintain operator peak performance. The current research sought to provide insight into the relationship between subjective workload, task performance, objective workload, and select physiology measures. Analysis of an existing …

A Decision Analysis Framework For Evaluation Of Helmet Mounted Display Alternatives For Fighter Aircraft, Matthew R. Dansereau

Theses and Dissertations

The promise of providing an intuitive and efficient information interface, while allowing the warfighter to perform other critical tasks such as targeting or aircraft control, has led to the growing popularity of Helmet Mounted Displays (HMDs) across the military landscape, especially combat aircraft. Though design and selection of competing systems is critical to optimized performance and safety, structured methods for the evaluation of HMDs are not often used in the acquisition community, leaving selection among alternative designs to the judgment of subject matter experts. However, technical decision-making has been shown to be flawed without the use of a structured decision …

Multi-Objective Trajectory Optimization Of A Hypersonic Reconnaissance Vehicle With Temperature Constraints, Tadeusz J. Masternak

Theses and Dissertations

Temperature-constrained optimal trajectories for a scramjet-based hypersonic reconnaissance vehicle were generated by developing an optimal control formulation and solving it using a variable order Gauss-Radau quadrature collocation method. The vehicle was assumed to be an air-breathing reconnaissance aircraft that has specified takeoff/landing locations, airborne refueling constraints, specified no-fly zones, and specified targets for sensor data collections. The aircraft model included fight dynamics, aerodynamics, and thermal constraints. This model was incorporated into an optimal control formulation that includes constraints on both the vehicle as well as mission parameters, such as avoidance of no-fly zones and coverage of high-value targets. Optimal trajectories …

Terrain Referenced Navigation Using Sift Features In Lidar Range-Based Data, Matthew T. Leines

Theses and Dissertations

The use of GNSS in aiding navigation has become widespread in aircraft. The long term accuracy of INS are enhanced by frequent updates of the highly precise position estimations GNSS provide. Unfortunately, operational environments exist where constant signal or the requisite number of satellites are unavailable, significantly degraded, or intentionally denied. This thesis describes a novel algorithm that uses scanning LiDAR range data, computer vision features, and a reference database to generate aircraft position estimations to update drifting INS estimates. The algorithm uses a single calibrated scanning LiDAR to sample the range and angle to the ground as an aircraft …

Characterizing And Managing Intrusion Detection System (Ids) Alerts With Multi-Server/Multi-Priority Queuing Theory, Christopher C. Olsen

Theses and Dissertations

The DoD sets forth an objective to employ an active cyber defense capability to prevent intrusions onto DoD networks and systems. Intrusion Detection Systems (IDS) are a critical part of network defense architectures, but their alerts can be difficult to manage. This research applies Queuing Theory to the management of IDS alerts, seeking to answer how analysts and priority schemes effect alert processing performance. To characterize the effect of these two variables on queue wait times, a MATLAB simulation was developed to allow parametric analysis under two scenarios. The first varies the number of analysts and the second varies the …

Hot Streak Characterization In Serpentine Exhaust Nozzles, Darrell S. Crowe

Theses and Dissertations

Modern aircraft of the United States Air Force face increasingly demanding cost, weight, and survivability requirements. Serpentine exhaust nozzles within an embedded engine allow a weapon system to fulfill mission survivability requirements by providing denial of direct line-of-sight into the high-temperature components of the engine. Recently, aircraft have experienced material degradation and failure along the aft deck due to extreme thermal loading. Failure has occurred in specific regions along the aft deck where concentrations of hot gas have come in contact with the surface causing hot streaks. The prevention of these failures will be aided by the accurate prediction of …

Approximate Dynamic Programming For Military Resource Allocation, Carl R. Parson

Theses and Dissertations

This research considers the optimal allocation of weapons to a collection of targets with the objective of maximizing the value of destroyed targets. The weapon-target assignment (WTA) problem is a classic non-linear combinatorial optimization problem with an extensive history in operations research literature. The dynamic weapon target assignment (DWTA) problem aims to assign weapons optimally over time using the information gained to improve the outcome of their engagements. This research investigates various formulations of the DWTA problem and develops algorithms for their solution. Finally, an embedded optimization problem is introduced in which optimization of the multi-stage DWTA is used to …

Improving Non-Linear Approaches To Anomaly Detection, Class Separation, And Visualization, Todd J. Paciencia

Theses and Dissertations

Linear approaches for multivariate data analysis are popular due to their lower complexity, reduced computational time, and easier interpretation. In many cases, linear approaches produce adequate results; however, non-linear methods may generate more robust transformations, features, and decision boundaries. Of course, these nonlinear methods present their own unique challenges that often inhibit their use. In this research, improvements to existing non-linear techniques are investigated for the purposes of providing better, timely class separation and improved anomaly detection on various multivariate datasets, culminating in application to anomaly detection in hyperspectral imagery. Primarily, kernel-based methods are investigated, with some consideration towards other …

Optimal Collision Avoidance Trajectories For Unmanned/Remotely Piloted Aircraft, Nathan E. Smith

Theses and Dissertations

The post-911 environment has punctuated the force-multiplying capabilities that Remotely Piloted Aircraft (RPA) provides combatant commanders at all echelons on the battlefield. Not only have unmanned aircraft systems made near-revolutionary impacts on the battlefield, their utility and proliferation in law enforcement, homeland security, humanitarian operations, and commercial applications have likewise increased at a rapid rate. As such, under the Federal Aviation Administration (FAA) Modernization and Reform Act of 2012, the United States Congress tasked the FAA to provide for the safe integration of civil unmanned aircraft systems into the national airspace system (NAS) as soon as practicable, but not later …

Cloud-Induced Uncertainty For Visual Navigation, Alyssa N. Gutierrez

Theses and Dissertations

This research addresses the numerical distortion of features due to the presence of clouds in an image. The research aims to quantify the probability of a mismatch between two features in a single image, which will describe the likelihood that a visual navigation system incorrectly tracks a feature throughout an image sequence, leading to position miscalculations. First, an algorithm is developed for calculating transparency of clouds in images at the pixel level. The algorithm determines transparency based on the distance between each pixel color and the average pixel color of the clouds. The algorithm is used to create a dataset …

Combined Effect Of Hot Extrusion And Heat Treatment On The Mechanical Behavior Of 7055 Aa Processed Via Spray Metal Forming, J. M. Schreiber, Z. R. Omcikus, Timothy Eden, Mala Sharma, V. Champagne, S. N. Patankar

Faculty Journal Articles

The mechanical properties of 7xxx series alloys can be tailored by subjecting them to deformation pro- cessing and heat treatment. In the present study dealing with spray forming of 7055 AA, extrusion and heat treatment involving solutionizing followed by peak aging resulted in improved mechanical behavior. The strength and ductility obtained are comparable to that of extruded and heat treated as-cast 7055 AA (Mondal et al., 2011) [1]. Spray forming offers an alternate route to develop high strength aluminum alloys and the current study is an attempt that draws closer to the target value of 1GPa strength and 10% ductility …

Cama Newsletter - December, 2014, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A ten page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

An Inductive Sensor For Real Time Measurement Of Plantar Normal And Shear Forces Distribution, Li Du, X Zhu, J. Zhe

Mechanical Engineering Faculty Research

Goal: The objective of this article is to demonstrate a multiplexed inductive force sensor for simultaneously measuring normal force and shear forces on a foot. Methods: The sensor measures the normal force and shear forces by monitoring the inductance changes of three planar sensing coils. Resonance frequency division multiplexing was applied to signals from the multiple sensing coils, making it feasible to simultaneously measure the three forces (normal force, shear forces in x and y axis) on a foot using only one set of measurement electronics with high sensitivity and resolution. Results: The testing results of the prototype sensor have …

Electrophoretic Deposition Of Gallium With High Deposition Rate, Hanfei Zhang, Yiping Mao, Sunand Santhanagopalan, Dennis Desheng Meng

Michigan Tech Publications, Part 1

In this work, electrophoretic deposition (EPD) is reported to form gallium thin film with high deposition rate and low cost while avoiding the highly toxic chemicals typically used in electroplating. A maximum deposition rate of ~0.6 μm/min, almost one order of magnitude higher than the typical value reported for electroplating, is obtained when employing a set of proper deposition parameters. The thickness of the film is shown to increase with deposition time when sequential deposition is employed. The concentration of Mg(NO₃)₂, the charging salt, is also found to be a critical factor to control the deposition …

Interfacial Polymerization For Colorimetric Labeling Of Protein Expression In Cells, Jacob L. Lilly, Phillip R. Sheldon, Liv J. Hoversten, Gabriela Romero, Vivek Balasubramaniam, Brad J. Berron

Chemical and Materials Engineering Faculty Publications

Determining the location of rare proteins in cells typically requires the use of on-sample amplification. Antibody based recognition and enzymatic amplification is used to produce large amounts of visible label at the site of protein expression, but these techniques suffer from the presence of nonspecific reactivity in the biological sample and from poor spatial control over the label. Polymerization based amplification is a recently developed alternative means of creating an on-sample amplification for fluorescence applications, while not suffering from endogenous labels or loss of signal localization. This manuscript builds upon polymerization based amplification by developing a stable, archivable, and colorimetric …

Myoelectric Prostheses: Novel Methodologies For Enhancing Usability And Control, Ghulam Rasool

Theses and Dissertations

Control of powered prostheses using the information from leftover muscles in amputees is a challenging problem. I investigated the problem with a view to find clinically reliable and robust schemes that can interpret human intent and control a powered prosthesis in real-time. Recently, pattern classification systems have been suggested to map muscle activation patterns to the human intent (or the movement). However, due to the underlying generic structure, system-specific information cannot be exclusively incorporated into pattern classification algorithms. I have proposed two new methodologies in my research. The first one extended the pattern classification with a new feature set comprised …

Ontogenetic Scaling Patterns And Functional Anatomy Of The Pelvic Limb Musculature In Emus (Dromaius Novaehollandiae), Luis P. Lamas, Russell P. Main, John R. Hutchinson

Department of Basic Medical Sciences Faculty Publications

Emus (Dromaius novaehollandiae) are exclusively terrestrial, bipedal and cursorial ratites with some similar biomechanical characteristics to humans. Their growth rates are impressive, as their body mass increases eighty-fold from hatching to adulthood whilst maintaining the same mode of locomotion throughout life. These ontogenetic characteristics stimulate biomechanical questions about the strategies that allow emus to cope with their rapid growth and locomotion, which can be partly addressed via scaling (allometric) analysis of morphology. In this study we have collected pelvic limb anatomical data (muscle architecture, tendon length, tendon mass and bone lengths) and calculated muscle physiological cross sectional area …

Neural Network Based Emg Driven Modeling And Control Of Human Walking, Alaa Muheddin Abdulrahman

Theses and Dissertations

Human body modeling (HBM) offers the benefit of replicating human activity into robotics and rehabilitation devices. Gait impairment is a consequence of several diseases like stroke, spinal cord injury, or Parkinson' disease. The modeling techniques developed in robotics have been used to improve gait abnormalities in walking and in building Exoskeletal robots. HBM is resource intensive as it requires setting-up laboratory facilities and using expensive instruments. Further, the data acquired is limited to the number of the participants. In addition, the accuracy of the model is important as it is related to human pathology. In this research, several Matlab based …

Solution Processed Cu(In,Ga)S2 Thin Film And Nanowire Photovoltaics, Johnthan Armstrong

Theses and Dissertations

Solar energy conversion is a highly attractive process for clean and renewable power for the future. Cu(In,Ga)(Se,S)2/CdS/ZnO has proven itself to be a worthwhile photovoltaic combination achieving record efficiencies upwards of 20%. These record efficiencies have been obtained through vacuum-based approaches. However, the high cost of vacuum-based fabrication processes become a barrier to affordable solar cells as an energy source. As a result, solution-based approaches have become the focus of many studies which have achieved record efficiencies of 15%. These solution-based approaches have not matched up with the vacuum-based approaches. In this work, we investigate methods to improve the solution-based …

Ceas E-News 12.22.2014, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

• Senior design
• Innovation day
• College in Industry scholarships
• Dr. James Springstead NIH grant

Broadband In Nebraska: Current Landscape And Recommendations, Nebraska Information Technology Commission, Nebraska Broadband Initiative, Nebraska Public Service Commission, University Of Nebraska-Lincoln, Nitc Community Council, Nebraska Department Of Economic Development, Aim

Rural Futures Institute: Publications

N ebraska’s broadband vision is that residents, businesses, government entities, commu-nity partners, and visitors have access to affordable broadband service and have the necessary skills to effectively utilize broadband technologies.

Objectives

To increase economic development opportunities, create good-paying jobs, at-tract and retain population, overcome the barriers of distance, and enhance qual-ity of life in Nebraska by stimulating the continuing deployment of broadband technologies which meet the need for increasing connection speeds.

To increase digital literacy and the widespread adoption of broadband technolo-gies in business, agriculture, health care, education, government and by individu-al Nebraskans.

Goals

The following goals and targets help …

Environmental Study Of The Release Of Btex From Asphalt Modified With Used Motor Oil And Crumb Rubber Modifier, Daniel Bergerson, Magdy Abdelrahman, Mohyeldin Ragab

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The need to be more environmentally conscious has recently shifted toward the forefront of society. With this new focus on environmentally responsible behavior comes the practice of using recycled materials in construction when possible. Therefore it is necessary to carefully evaluate the safety of any recycled materials being used in pavement materials. Under this study, a reference of testing is presented and implemented to test leachate of samples of two different asphalt binder types containing used motor oil (UMO) and/or crumb rubber modifier (CRM) for the presence of benzene, toluene, ethylbenzene, and xylenes (BTEX). Alongside batch leaching tests, air testing …

Responses To Catastrophic Agi Risk: A Survey, Kaj Sotala, Roman V. Yampolskiy

Faculty and Staff Scholarship

Many researchers have argued that humanity will create artificial general intelligence (AGI) within the next twenty to one hundred years. It has been suggested that AGI may inflict serious damage to human well-being on a global scale ('catastrophic risk'). After summarizing the arguments for why AGI may pose such a risk, we review the fields proposed responses to AGI risk. We consider societal proposals, proposals for external constraints on AGI behaviors and proposals for creating AGIs that are safe due to their internal design.

Synthesis Of Irreversible Incompletely Specified Multi-Output Functions To Reversible Eosops Circuits With Pse Gates, Robert Adrian Fiszer

Dissertations and Theses

As quantum computers edge closer to viability, it becomes necessary to create logic synthesis and minimization algorithms that take into account the particular aspects of quantum computers that differentiate them from classical computers. Since quantum computers can be functionally described as reversible computers with superposition and entanglement, both advances in reversible synthesis and increased utilization of superposition and entanglement in quantum algorithms will increase the power of quantum computing.

One necessary component of any practical quantum computer is the computation of irreversible functions. However, very little work has been done on algorithms that synthesize and minimize irreversible functions into a …

On Demand Cell Sectoring Based Fractional Frequency Reuse In Wireless Networks, Shakil Ahmed, Mohammad Arif Hossain, Mostafa Zaman Chowdhury

Electrical and Computer Engineering Student Research

In this paper, a dynamic channel assigning along with dynamic cell sectoring model has been proposed that focuses on the Fractional Frequency Reuse (FFR) not only for interference mitigation but also for enhancement of overall system capacity in wireless networks. We partition the cells in a cluster into two part named centre user part (CUP) and edge user part (EUP). Instead of huge traffic, there may be unoccupied channels in the EUPs of the cells. These unoccupied channels of the EUPs can assist the excessive number of users if these channels are assigned with proper interference management. If the number …

Laparoscopic Devices And Methods Of Using, M. Susan Hallbeck, Jakeb Riggle, Adam De Laveaga, Jake Kaufman

Department of Mechanical and Materials Engineering: Faculty Publications

A number of improvements to laparoscopic devices are described herein, primarily to improve the ergonomic functionality of the devices. For example, an articulating rod system is described, a gripping mechanism is described, and an end effector is described

Electro-Disinfection Of Municipal Waste Water Using Direct Current, Julio A. Acosta Vega

LSU New Orleans Theses and Dissertations

Wastewater treatment has always been a problem to human settlers. Events such as the great stink of London during the summer of 1858 have pushed engineers into developing new technologies to deal with such wastes in effective and safe ways. Research projects like this aim to find ways of improving performance, economics, or environmental friendliness of treatment and disinfection methods.

This thesis deals with the effectiveness, mechanisms of action, by-products and side effects of using DC current to disinfect secondary effluent. It is proposed as an alternative to conventional methods, such as chlorination, which are not always environmentally friendly or …

Identification Of Hydrodynamic Forces Developed By Flapping Fins In A Watercraft Propulsion Flow Field, Erdem Aktosun

LSU New Orleans Theses and Dissertations

In this work, the data analysis of oscillating flapping fins is conducted for mathematical model. Data points of heave and surge force obtained by the CFD (Computational Fluid Dynamics) for different geometrical kinds of flapping fins. The fin undergoes a combination of vertical and angular oscillatory motion, while travelling at constant forward speed. The surge thrust and heave lift are generated by the combined motion of the flapping fins, especially due to the carrier vehicle’s heave and pitch motion will be investigated to acquire system identification with CFD data available while the fin pitching motion is selected as a function …

Educational Modeling For Fault Analysis Of Power Systems With Statcom Controllers Using Simulink, Tetiana Brockhoeft

LSU New Orleans Theses and Dissertations

The analysis of power systems under fault condition represents one of the most important and complex tasks in power engineering. The study and detection of these faults are necessary to ensure that the reliability and stability of the power system do not suffer a decrement as a result of a critical event such as fault. The purpose of this thesis is to develop and to present an educational tool for students to model FACTS devices using Simulink. Furthermore, the development of this thesis provides the means for students to model different types of faults. The development is based on presenting …

Electrochemical Disinfection Of Municipal Wastewater Using Alternating Current, Xavier A. Chavez Reyes

LSU New Orleans Theses and Dissertations

This research focused on chlorine-free disinfection of wastewater by complying with today's regulations. The equipment used was a continuous flow electrochemical reactor connected to an alternating current (AC) power supply. The electrodes used were made out of titanium coated with iridium oxide. To determine the inactivation of Escherichia Coli, a bacterial count method based on the USEPA method 1603 was used.

After several experiments it was determined that electrochemical disinfection using AC was not efficient and economic enough to be classified as a viable alternative to chlorine disinfection. It was demonstrated that chlorine can be produced by electrolysis using AC …