Engineering Commons^™

Low Energy Disruption Of Lipid Containing Biomass, Joaquin Rodriguez

Open Access Theses & Dissertations

Lipid containing biomass from microalgae has received recent research interest as a renewable and sustainable feedstock for biofuel production. Algae is known to offer as much as 30 times the energy density than corn based ethanol, the current world standard for biomass based liquid transportation fuels. The development of large scale systems and methods of extracting lipids from microalgae is still in the early stages of development and significant increases in efficiency and reduction in costs are necessary to substantiate algae as a feasible alternative source of fuel. Traditional conversion of algae feedstock into a refineable feedstock for biofuel can …

Oxidation Of Borides And Carbides With Y2o3 And Ta Additions, Salvador Manuel Rodriguez

Open Access Theses & Dissertations

The study presented here describes an investigation of an oxidation scale of a fully-sintered Y2O3-ZrB2-TiC composite exposed in air at 1173K. Upon oxidation of the boride/carbide, a ZrO2-TiO2 was expected to form similar to the ZrO2-SiO2 dual scale of an oxidized ZrB2-SiC. The 47wt% Y2O3-38wt%ZrB2-16wt%TiC composite formed a dual scale consisting primarily of an Y2O3-ZrO2-TiC inner scale with an outer scale of ZrO2-TiO2-Y2O3.

The samples oxidized with a parabolic layer growth allowing the calculation of the effective diffusion coefficient indicating that the oxidation was controlled by oxygen ingress through primarily the ZrO2-Y2O3 phase. The oxygen potential between the inner layer …

Identification Of Rework Station Location To Enhance Reworkability Using Design For Disassembly, Juan Alejandro Saavedra

Open Access Theses & Dissertations

Rework stations are commonly established as part of each assembly stations causing the material flow of the process to be constantly interrupted. Another option is to place the rework station at the end of the production, but this is not cost effective. This breakeven point between reworkability and cost methodology has been proposed in this thesis to identify the location of a single rework station in an assembly line in order to enhance reworkability using the Design for Disassembly (DfD) principles. The methodology uses the 17 guidelines of DfD in a manufacturing scenario in order to propose a reworkability index …

Determination Of The Dynamic Behavior Of Subjects With Diabetic Neuropathy, Luis G. Sagarnaga Lopez

Open Access Theses & Dissertations

The diabetic foot is one of the most feared complications of diabetes [3]. Causes of a diabetic foot come from many disorders including diabetic neuropathy, peripheral vascular disease, charcot's neuropathy, foot ulceration, and limb amputation [4]. Statistics have revealed that 8.3 percent of population in the U.S. is affected by diabetes in 2010, i.e., 25.8 million people. About 60 percent to 70 percent of people with diabetes have mild to severe forms of nervous system damage [13]. There is an enormous impact on the physical and mental health of patients who suffer from diabetes.

This research was to determine the …

Investigation On A Gas-Solid Fluidized Bed Hydrodynamics Using A Non-Intrusive Technology To Visualize Flow Field, Md Rashedul Hasan Sarker

Open Access Theses & Dissertations

The biggest challenge for 21st century is to fulfill global energy demand and at the same time reduce detrimental impact on environment. Gasification technology can meet the requirement and also reduce emission without compromising its performance. In coal gasification, instead of burning coal completely a partial combustion takes place with presence of steam and limited amount of oxygen. In this controlled environment a chemical reaction takes place and produces a mixture of clean synthetic gas. Gas-solid fluidized bed is one type of gasification technology. During gasification mixing behavior of solid (coal) and gas and their flow pattern very complicated to …

Evaluation Of Non-Nuclear Devices In Measuring Moisture Content And Density Of Soils, Martin Jesus Sotelo

Open Access Theses & Dissertations

The objective of this report was to assess the ability of several different devices to measure moisture content and dry density of various compacted geomaterials. The experimental research involved the testing of different subgrade soils and one base material. More than a dozen specimens, 2 ft in height and 1.5 ft in diameter, were constructed to evaluate the Transtech SDG 200, Purdue TDR, and the Decagon 10 HS moisture content sensor. The Speedy Moisture Tester and DOT600 Roadbed Water Content Meter were also evaluated using individual soil samples. All materials were tested at five different moisture contents, but at their …

Control Of A Robotic Prototype Multi-Axis Synergistic System, Julio A. Torres

Open Access Theses & Dissertations

Balance is an ability that every person has and uses in normal daily life, to walk, run, stand, dance, etc. However, there are people who suffer a kind of balance impairment. The Computerized Dynamic Posturography (CDP) is technique in balance rehabilitation, where the patient is asked to stand on a moving platform that is equipped with sensors that measure how well you maintain your balance. In this thesis, a new CDP mechatronic system, the Multi-Axis Synergistic System (MASS), for balance assessment is being developed.

As a first stage and as the objective of this research work the transferable control algorithm …

Development Of An Electronic Vehicle Miles Travelled Toll Model, Marketa Vavrova

Open Access Theses & Dissertations

This thesis presents the reasons why the fuel tax is no longer a viable source of revenues and suggests new sources of funding. One possibility is to replace the fuel tax with a distance-based toll applied nationwide. Vehicle miles travelled (VMT) fee is compared to the fuel tax, and the relationship between road infrastructure spending and fuel taxation in the United States (U.S.) and the European Union (EU) is explored. Also the European approach to taxation and tolling is described and compared to the situation in Texas.

The development of a statewide distance-based toll model to estimate the feasibility of …

A Study Of International Wastewater Challenges And Policy In The Tijuana River Watershed, Gloria Ann Villaverde

Open Access Theses & Dissertations

Since the 1930s, untreated and undertreated sewage from Tijuana, Baja California, México has been released into the Tijuana River Watershed causing contamination of the water supply, crops, the Tijuana Estuary and California beaches. Passage of the North American Free Trade Agreement (NAFTA) has exacerbated the problem by causing population and industrial growth explosions for which there have been insufficient services to meet the needs of the people. The waters of the Tijuana River flow (from México) north over the International Border, into the Tijuana Estuary, discharge out to the Pacific Ocean and often flow north, up the California Coast; therefore, …

Implementation Of Evolutionary Algorithms On The Power Industry And Aviation Security, Anuar Jesus Aguirre

Open Access Theses & Dissertations

The main objective of the power electric power grid is to supply reliable electricity to all the customers. Customers could be industrial, commercial, household, transportation and others. The power grid is a complex and large, and it formed by the conjunction of the generation, transmission and distribution system. The present research is focused in power distribution system. A new component replacement analysis method to solve component replacement problems for complex electricity distribution systems using Genetic Algorithms is developed. In the present model a Taylor series expansion is used to approximate the associated opportunity cost for each component in the system. …

Decorin Expression, Straw-Like Structure, And Differentiation Of Human Costal Cartilage, Michael W. Stacey, Janna Grubb, Anthony Asmar, Julie Pryor, Hani Elsayed-Ali, Ali Beskok, Diganta Dutta, Annie Fecteau, Alice Werner, Dennis A. Darby, Robert Kelly

Bioelectrics Publications

Costal cartilage is much understudied compared with the load-bearing cartilages. Abnormally grown costal cartilages are associated with the inherited chest wall deformities pectus excavatum and pectus carinatum resulting in sunken and pigeon chests, respectively. A lack of understanding of the ultrastructural and molecular biology of costal cartilage is a major confounder in predicting causes and outcomes of these disorders. This study analyzed the structure of marginal human costal cartilage (ribs 6-10) through scanning electron and atomic force microscopes and identified the presence of straw-like structures running longitudinally. We also demonstrated that chondrocytes tend to occur singly or as doublets and …

Development Of Eco-Friendly Flame Retardant Fabric Using Phosphorus Based Intumescence Chemistry, Vikas P. Joshi

Master's Theses and Doctoral Dissertations

The research aims at developing Eco-friendly flame retardant textile fabric using phosphorous based intumescence chemistry. Phosphorous in the structure of Spirocyclic pentaerythriol diphosphoryl chloride (SPDPC) acts as the main group to impart flame retardancy. Intermediate compounds were synthesized in the laboratory and finally converted into sol. The silane sol was applied to the textile material using pad-dry-cure method. The intermediate compounds and the coated material were tested using Fourier transform infrared spectroscopy (FTIR), Differential scanning calorimeter (DSC), and Thermogravemetric analysis (TGA) testing instruments. Vertical flammability testing was performed as per ASTM D-6413 standards to test the fabric for its flame …

Impact Of Stem Focused Project Based Learning Activities On Career Education For K-12 And Community College Students, Alok K. Verma

Engineering Technology Faculty Publications

Low enrollment and high attrition rates in Science, Technology, Engineering and Math (STEM) based degree programs have created a workforce problem in industries like shipbuilding and repair which are important for national security. Part of this problem can be attributed to pedagogical issues like lack of engaging hands-on activities utilized for science and math education in middle and high schools. Lack of student interest in technical careers can also be attributed to lack of an integrated approach in teaching math, science and technical education. To engage student's interest in the technical career path, it is important that students establish a …

Implement Smart Sensors With Wireless Communication Protocols With Embedded Microcontrollers In A Capstone Project Design, Steve C. Hsiung, Cory T. Gleason, Lacides A. Osorio, Charles H. Mcginn

Engineering Technology Faculty Publications

Wireless communication has become popular and widely used in our daily lives. Their applications are: Cellular Wireless for telephone systems, data collection, voice communication, and other mobile or extremely remote devices, Bluetooth for low-power applications in short range and moderate date bandwidth, Proprietary ISM (industrial, scientific, medical) protocols used in open frequency bands from 260 to 470 MHz, 902 to 928 MHz, and 2.4GHz, 802.11/WiFi in wireless data communications, 802.15/ZigBee for mesh networks of sensors and controllers, and Z-Wave for low speed wireless protocol of home electronics devices to intercommunicate using reliable protocol that easily travels through walls, floors, and …

Fusion Of Visual And Thermal Images Using Genetic Algorithms, Sertan Erkanli, Jiang Li, Ender Oguslu, Shangce Gao (Ed.)

Electrical & Computer Engineering Faculty Publications

No abstract provided.

Modelling Challenges And Attacks To Wireless Networks, Dongsheng Zhang, Santosh Ajith Gogi, Dan S. Broyles, Egemen K. Çetinkaya, James P. G. Sterbenz

Electrical and Computer Engineering Faculty Research & Creative Works

A thorough understanding of the network behaviour when exposed to challenges is of paramount importance to construct a resilient MANET (mobile ad hoc network). However, modelling mobile and wireless networks as well as challenges against them is non-trivial due to dynamic and intermittent connectivity caused by channel fading and mobility of the nodes. We treat MANETs as time-varying graphs (TVGs) represented as a weighted adjacency matrix, in which the weights denote the link availability. We present how centrality-based attacks could affect network performance for different routing protocols. Furthermore, we model propagation loss models that represent realistic area-based challenges in wireless …

Software Education For Changing Computing Technology, Steve Eugene Watkins

Electrical and Computer Engineering Faculty Research & Creative Works

Software education has been dominated by procedural-based programming languages such as BASIC, FORTRAN and C, and before that, the assembly languages. The primary reason that this methodology has held such sway in education was that it allowed quick action for the first major users of computers. This approach was the most straight-forward means of utilizing hardware that, over the last 60 years, has gotten faster and more complex through smaller and more densely packed elements. However, traditional advances as described by Moore’s law are now reaching both physical and economic limits. Pure object-oriented programming approaches offer benefits for hardware that …

Adaptive Multi-Vehicle Area Coverage Optimization System And Method, Ryan J. Meuth, John Lyle Vian, Emad W. Saad, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

A system and method for dividing a predefined search region into a map of a plurality of subregions to be searched by a plurality of mobile platforms, taking into account the capabilities of the mobile platforms and varying environmental conditions within the subregions, while minimizing the time needed to search each of the subregions. The system and method updates the map of the subregions as needed, in real time, to account for changing environmental conditions and changes in the capabilities of the mobile platforms being used. The subregions may also be determined using a desired level of probability for detecting …

Bridgeless High Power Factor Buck-Converter Operating In Discontinuous Capacitor Voltage Mode, Nasrullah Mohammad Awni Khraim

Theses

High power factor AC-DC rectifiers have gained a lot of attention due to demanding international regulations. The international harmonics’ standards, i.e. IEC 61000-3-2 and EN 61000-3-2 require low harmonic content of the main line current, or in other words, high power factor. Also, new market initiatives such as the 80 PLUS initiative, require high efficiency of the power supply. These standards specify the AC line current harmonics’ limits depending on load and application.

In this research, a new converter, with high power factor and high efficiency, operating in discontinuous capacitor voltage mode (DCVM) – is investigated targeting personal computers (PC) …

Strengthening Of Reinforced Concrete Beams Pre-Damaged In Shear, Yousef Mohammed Bachar Chekfeh

Theses

Repair and strengthening of existing reinforced concrete (RC) structures has increased drastically in recent years. Shear reinforcement in RC beams is typically of a small bar diameter, and hence any shear-damage would result in a severe safety hazard and a catastrophic mode of failure especially under extreme loading events. The present work was initiated to the effectiveness of different composite strengthening systems; namely externally bonded carbon fiber reinforced polymer (EB-CFRP), and near surface mounted glass fiber reinforced polymer (NSM-GFRP) to prolong the functional service life of RC beams pre-damaged in shear. It comprised experimental testing and analytical investigation.

The experimental …

Robust Transmission Of Images Based On Jpeg2000 Using Edge Information, Amjad Nazih Bou Matar

Theses

In multimedia communication and data storage, compression of data is essential to speed up the transmission rate, minimize the use of channel bandwidth, and minimize storage space. JPEG2000 is the new standard for image compression for transmission and storage. The drawback of Compression is that compressed data are more vulnerable to channel noise during transmission. Previous techniques for error concealment are classified into three groups depending on the Approach employed by the encoder and decoder: Forward Error Concealment, Error Concealment by Post Processing and Interactive Error Concealment. The objective of this thesis is to develop a Concealment methodology that has …

Effect Of Impurities On The Superheating Field Of Type-Ii Superconductors, F. Pei-Jen Lin, A. Gurevich

Physics Faculty Publications

We consider the effect of nonmagnetic and magnetic impurities on the superheating field H_s in a type-II superconductor. We solved the Eilenberger equations, which take into account the nonlinear pairbreaking of Meissner screening currents, and calculated H_s(T) for arbitrary temperatures and impurity concentrations in a single-band s-wave superconductor with a large Ginzburg-Landau parameter. At low temperatures, nonmagnetic impurities suppress a weak maximum in H_s(T), which has been predicted for the clean limit, resulting, instead, in a maximum of H_s as a function of impurity concentration in a moderately clean limit. It is shown that …

A Proposal To Use Real Time Pricing To Manage The Electrical Grid As A Step Toward Distributed Control, David Haynes, Steven Corns

Engineering Management and Systems Engineering Faculty Research & Creative Works

An alternative method of managing the electrical grid is presented. Rather than using a centralized control paradigm to balance generation against the load, a distributed approach is proposed. It is believed that this design improves the robustness of the grid by using an architecture that allows for the automatic formation of local micro grids. the self-organization of these micro-grids makes it possible to identify participants in an ad hoc fashion after a storm for purposes of disaster recovery. the micro-grid can automatically grow to encompass all participants and join with other grids to encompass the entire region. © 2012 Published …

Preface To Part Ii Computational Intelligence And Machine Learning, Rosemary D. Paradis, David Enke

Engineering Management and Systems Engineering Faculty Research & Creative Works

No abstract provided.

Fuzzy Assessor Using Type 1 And Type 2 Fuzzy Sets, Paulette Acheson, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

This paper provides a fuzzy assessor that can be used to evaluate system architectures. the fuzzy assessor includes a method of assigning system architecture attribute values to the lower-level subsystems using type 1 fuzzy sets and type 2 fuzzy sets. Each architecture attribute is evaluated at the lowest subsystem level and then mathematically rolled-up to provide the system level value for each architecture attribute. Then the value for each architecture attribute is combined into an overall system architecture performance value. This provides a mathematical method of qualitatively assessing a system architecture based on key architecture attributes. the fuzzy assessor uses …

Directional Anisotropy In The Mechanical Behavior Of Friction Stir Processed And Aged Az91 Alloy, Vipin Jain, Wei Yuan, R. S. Mishra, Gouthama, Anil K. Gupta

Materials Science and Engineering Faculty Research & Creative Works

Friction stir processing (FSP) is an emerging grain refinement technique for magnesium alloys. in this study, a cast AZ91 alloy was processed by a single-pass FSP to achieve an average grain size of ∼6 μm in the nugget zone. the FSP is found to introduce texture in the alloy due to preferred alignment of basal poles in the processing direction. the mechanical behavior is significantly influenced by texture. after FSP, the alloy was aged at different temperatures and times for continuous and discontinuous precipitation of β-Mg17Al12. a high anisotropy in yield stress is observed in the processing and transverse direction …

A Fuzzy Inference Model For Predicting Irregular Human Behaviour During Stressful Missions, Sina Khanmohammadi, Cihan Hayreddin Dagli, Farnaz Zamani Esfahlani

Engineering Management and Systems Engineering Faculty Research & Creative Works

In this paper a hybrid fuzzy inference and transfer function modeling is used to predict the irregular human behavior during hard and stressful tasks such as dangerous military missions. a set of affecting factors such as missioner's experience, fatigue, sunshine intensity, hungriness, thirstiness, psychological characteristics, affright, etc. may be taken to account. in this regard a dynamic system model is used to predict the convolution of the timed effects of different factors on irregular behavior of personnel during the mission. This approach of predicting irregular behavior or erroneous decision making of staff have serious usages in aerospace, military, social and …

Exploring Functional Networks Of The Brain Relating To Upper Extremity Motor Skill Using Graph Theory, Dominic Nathan, Stephen J. Guastello, Robert W. Prost, Dean C. Jeutter

Biomedical Engineering Faculty Research and Publications

No abstract provided.

Effective Dielectric Constant Of Two Phase Systems, Vladimir Petrovsky, Piotr Z. Jasinski, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Theoretical approaches to electrical characterization of two phase systems are mostly limited to the systems where the individual components exhibit the same type of conductivity (pure dielectric or pure conductive systems). In this article, the brick wall geometry is extended to the mixed conductive systems with percolation. Impedance spectroscopy techniques were used for experimental investigation of slurries. Various metal oxide powders and host liquids were analyzed using a wide range of solids loadings. Comparison of experimental results with theoretical predictions shows good fitting of the experimental data. Parameters (the values of permittivity for both phases and percolation threshold) calculated from …

Deposition Of Cerium-Based Conversion Coatings On Aluminum Alloy 380, Ci Lin, Surender Maddela, William Fahrenholtz, Matthew O'Keefe

Materials Science and Engineering Faculty Research & Creative Works

Cerium-based conversion coatings were deposited on as-cast aluminum alloy 380 substrates by a spontaneous immersion process. In this study, the effects of rinsing temperature prior to immersion in the coating deposition solution were studied with respect to the surface morphology, electrochemical response, and corrosion resistance of the coatings. Panels rinsed at 25 degrees celsius prior to coating had large cracks and holes in the coating. In contrast, panels rinsed at 100 degrees celsius prior to coating had a uniform coating morphology with fewer, smaller cracks. Electrochemical testing revealed that coatings deposited on substrates rinsed at 100 degrees celsius had higher …