Engineering Commons^™

An Extended Double Row Layout Problem, Chase C. Murray, Xingquan Zuo, Alice E. Smith

12th IMHRC Proceedings (Gardanne, France – 2012)

The double row layout problem (DRLP) seeks to determine optimal machine locations on either side of an aisle, where the objective has been defined as the minimization of material ow cost among ma- chines while meeting machine clearance constraints. In this paper, we extend existing DRLP formulations in two respects. First, we consider the minimization of layout area besides the usual material ow cost objective. Second, we present a mixed integer linear programming formulation that permits non-zero aisle widths. This new formulation also includes new constraints that eliminate layout \mirroring," thus reducing the solution space significantly and thus solution times. …

Robust Material Handling System Design Based On The Risk Versus Cost Tradeoff, Marc Goetschalckx, Edward Huang, Pratik Mital

12th IMHRC Proceedings (Gardanne, France – 2012)

The design and planning of major material handling systems belongs to the class of systems design problems under uncertainty. The overall structure of the system is decided during the current design stage, while the values of the future conditions and the future planning decisions are not known with certainty. Typically the future uncertainty is modeled through a number of scenarios and each scenario has an individual timediscounted total system cost. The overall performance of the material handling system is characterized by the distribution of these scenario costs. The central tendency of the cost distribution is almost always computed as the …

Toward Sustainability, High Density And Short Response Time By Live-Cube Storage Systems, Nima Zaerpour, Yugang Yu, René De Koster

12th IMHRC Proceedings (Gardanne, France – 2012)

This paper studies random storage in a live-cube storage system where loads are stored multi-deep. Although such storage systems are still rare, they are increasingly used, for example in automated car parking systems. Each load is accessible individually and can be moved to a lift on every level of the system in x- and y-directions by a shuttle as long as an open slot is available next to it, comparable to Sam Loyd’s sliding puzzles. A lift moves the loads across different levels in z-direction. We derive the expected travel time of a random load from its storage location to …

Process Analysis For Material Flow Systems, Thorsten Schmidt, David Wustmann, Robert Schmaler

12th IMHRC Proceedings (Gardanne, France – 2012)

This paper describes a generic approach for analysis of internal behavior of logistic systems based on event logs. The approach is demonstrated by an example of event data from the simulation model of an automated material handling system (MHS) in a manufacturing company. The purpose of the analysis is the identification of design and operation problems and their causes, prospectively. As a result, the simulation model developer obtains the condensed and ranked information on events. These events describe the internal system behavior with anomalies pointing at either possible problems or capacity reserves.

A Study On Storage Allocation In An Automated Semiconductor Manufacturing Facility, St´Ephane Dauz`Ere-P´Er`Es, Claude Yugma, Ahmed Ben Chaabane, Ahmed Ben Chaabane, Lionel Rulli`Ere, Gilles Lamiable

12th IMHRC Proceedings (Gardanne, France – 2012)

This paper deals with the allocation of storage capacity in the automated material handling environment of a semiconductor wafer manufacturing facility. The impact of the allocation of stokers to machines in semiconductor fabrication facilities (fabs) is very little studied, although it significantly impacts the efficiency of the Automated Material Handling System (AMHS). After motivating and describing the problem of allocating unitary stokers to machines, a first local approach is discussed. We then propose a Mixed Integer linear Programming model to solve the global problem with two objectives: Minimizing the total maximum travel distance of vehicles and balancing the utilization of …

Design & Modeling Of A Single Machine Flow Rack As/Rs, Zaki Sari, Nadir Hakim Bessenouci

12th IMHRC Proceedings (Gardanne, France – 2012)

In this paper, we aim to introduce a new variation of the flow rack automated storage and retrieval system (AS/RS) using a single machine for storage and retrieval operations instead of two machines. Also, analytical expressions are derived for expected single and dual cycle times of the storage and retrieval machine. For that, randomized storage assignment, and Tchebychev travel are assumed. Two dwell point positions are investigated and compared to determine the best one. Finally an experimental validation using simulation is conducted to verify the quality of the developed.

An Mip Approach To The U-Line Balancing Problem With Proportional Worker Throughput, Reyhan Erin, Andres L. Carrano, Moises Sudit

12th IMHRC Proceedings (Gardanne, France – 2012)

One of the major challenges faced by manufacturing companies is to remain competitive in dynamic environments, where fluctuations in customer demand and production rates require systems capable of adapting in a practical and economical way. A U-shaped production cell is considered one of the most flexible designs for adapting the workforce level to varying conditions. However, re-balancing efforts are time consuming and often require a new work allocation and line design. In this paper, a two-stage MIP model to determine the best cell design under varying workforce levels is proposed. The model seeks to maintain proportionality between throughput and the …

A Yard Crane Scheduling Problem With Practical Constraints, Amin Hossein Gharehgozli, Yugang Yu, Rene De Koster, Gilbert Laporte

12th IMHRC Proceedings (Gardanne, France – 2012)

The problem considered in this paper is to locate storage containers while a set of container storage and retrieval requests are sequenced. Two automated cranes stack and retrieve containers in a single block of a yard. The cranes cannot pass each other and must be separated by a safety distance. Storage containers are initially located at the seaside and land side input/output (I/O) points of the block. Each must be stacked in a specific location of the block, selected from a set of open locations suitable for stacking the storage container. Retrieval containers are initially located in the block and …

Modeling The Inventory Requirement And Throughput Performance Of Picking Machine Order-Fulfillment Technology, Jennifer A. Pazour, Russell D. Meller

12th IMHRC Proceedings (Gardanne, France – 2012)

Picking machines, also known as remote-order-picking systems, are an example of a stock-to-picker piece-level order-fulfillment technology that consists of two or more pick stations and a common storage area. An integrated closed-loop conveyor decouples the pick stations from the storage area by transporting the needed totes to and from the storage area and the pick stations. We develop a probabilistic model capable of quantifying the inventory differences between order-fulfillment technologies that pool inventory with technologies that do not pool inventory. To determine the throughput of a picking machine, we develop a methodology that incorporates existing analytical models for the picking …

Strongly Complete Logics For Coalgebras, Alexander Kurz, Jiří Rosický

Engineering Faculty Articles and Research

Coalgebras for a functor model different types of transition systems in a uniform way. This paper focuses on a uniform account of finitary logics for set-based coalgebras. In particular, a general construction of a logic from an arbitrary set-functor is given and proven to be strongly complete under additional assumptions. We proceed in three parts.

Part I argues that sifted colimit preserving functors are those functors that preserve universal algebraic structure. Our main theorem here states that a functor preserves sifted colimits if and only if it has a finitary presentation by operations and equations. Moreover, the presentation of the …

A Systems View Of Time-Dependent Ethical Decisions, Hamid A. Rafizadeh, Brad Kallenberg

Theology and Religious Studies Faculty Publications

Every ethical situation has a "system" characteristic with a group of human and nonhuman elements linked in a variety of interactions and interdependencies. The system allows the elements to act in part or as a whole towards achieving a spectrum of goals, objectives, or ends. The systems view asserts that any local and bipolar understanding of an ethical situation would be deficient as it would neglect certain interactions and interdependencies as well as overlook differing orientations of agents towards different goals and objectives. The purpose of this paper is to highlight the need for a systems-based view of ethics.

The Theological Origins Of Engineering, Brad Kallenberg

Theology and Religious Studies Faculty Publications

Knowledge of our roots can sometimes help us figure out how we ought to proceed. Many claim that engineering began in ancient antiquity with the Egyptian pyramids, Archimedes' inventions, or the Roman aqueducts. Others give contemporary engineering a more recent history, tracing its origins to the Industrial Revolution or the Enlightenment. Yet what is often overlooked is the fact that contemporary engineering owes part of its identity to medieval monasticism.

The advantage of remembering this history is the bearing it has on the questions "What is engineering for?" and "How ought engineering be practiced?"

Michael Davis makes the claim that, …

Distributed Formal Concept Analysis Algorithms Based On An Iterative Mapreduce Framework, Ruairí De Fréin, Biao Xu, Eric Robson, Mícheál Ó Fóghlú

Conference papers

While many existing formal concept analysis algorithms are efficient, they are typically unsuitable for distributed implementation. Taking the MapReduce (MR) framework as our inspiration we introduce a distributed approach for performing formal concept mining. Our method has its novelty in that we use a light-weight MapReduce runtime called Twister which is better suited to iterative algorithms than recent distributed approaches. First, we describe the theoretical foundations underpinning our distributed formal concept analysis approach. Second, we provide a representative exemplar of how a classic centralized algorithm can be implemented in a distributed fashion using our methodology: we modify Ganter’s classic algorithm …

Multi-Channel Audio Information Hiding, Jonathan Blackledge, Abdulrahman Isam Al-Rawi, Ruairi Hickson

Conference papers

We consider a method of hiding many audio channels in one host signal. The purpose of this is to provide a ‘mix’ that incorporates information on all the channels used to produce it, thereby allowing all, or, at least some channels to be stored in the mix for later use. After providing an overview of some recently published audio water marking schemes in the time and transform domains, we present a method that is based on using a four least significant bits scheme to embed five MP3 files into a single 16-bit host stereo WAV file without incurring any perceptual …

Targeting Cell Nuclei For The Automation Of Raman Spectroscopy In Cytology, Jonathan Blackledge, Dmitri Dubovitskiy, Fiona Lyng

Conference papers

Biological cell analysis has, and is still, an important aspect in medical research and clinical diagnosis. Although cytologists routinely undertake a diagnosis using optical mi-croscopy, human factors make this routine unreliable especially when it involves many consecutive tasks that are monotonous, time consuming and focus on pattern matching tasks where the patterns concerned are not always entirely clear and/or do not necessarily belong to a well defined class. Raman Spectroscopy provides the potential to generate a fundamental representation on the status of cellular conditions through the characteristics of a Raman spectrum generated by the back-scatter of a laser pulse incident …

The Rock 2012, School Of Engineering And Computer Science

The Rock

No abstract provided.

A Collaborative Framework In Outbound Logistics For The Us Automakers, Nazmul Hassan

Wayne State University Dissertations

The competitive landscape of the U.S. automotive market has transformed from the traditional "Big Three" players to too many viable players. In 2008-2009, the harsh market conditions, excess production capacity, capital asset redundancies, and many inefficient strategies submerged as the roadblocks for the US automakers to stay competitive and profitable in the North American market. In this new competitive era, cross-company collaboration in product development, standardizing and communizing supply base, sharing flexible manufacturing platforms, using common inbound and out bound logistics service providers and warehousing etc. can play vital roles for the US automakers to reduce overall cost and return …

Effects Of Transition Metal Doping On Multiferroic Ordering In Ni3v2o8 And Fevo4, Akila Deeghayu Kumarasiri

Wayne State University Dissertations

We have studied the effects of doping both non-magnetic and magnetic ions on the phase transitions and multiferroic ordering in two multiferroic oxides; Ni3V2O8 and FeVO4. Magnetic, dielectric, specific heat, polarization and AC susceptibility measurements were used to track changes in phase transition temperatures. We found that the two higher temperature magnetic transitions in Ni3V2O8; TH = 9.1 K and TL = 6.3 K are suppressed to lower temperatures with all transition metal dopants. For Zn doping, the rates of the suppression of both TH and TL with dopant fraction are consistent with simple site dilution for two-dimensional spin systems, …

Timing Of Residential Electric Loads To Reduce Air Emissions From Power Generation, Michelle Marinich Rogers

Wayne State University Theses

Over the course of a day, power utilities must respond to changing demand by dispatching or shedding output from different generators. Each generator is associated with a unique profile of air emissions, based on the type of fuel consumed, installed pollution controls, and the generator's efficiency. The aim of this study is to determine whether shifting electric demand to times when cleaner generation sources are available would result in overall emissions reduction.

Dynamic wholesale pricing in the electric power market, specifically the Locational Marginal Price (LMP), provides a means to estimate the marginal generator fuel type. This knowledge was used …

Polymeric Nanocarriers For The Regional And Systemic Delivery Of Therapeutics To And Through The Lungs, Balaji Bharatwaj

Wayne State University Dissertations

The lungs are considered as one of the fastest portals of entry to the bloodstream and oral inhalation (OI) has long been accepted as the preferred mode of administration of therapeutics to the respiratory tract. However, despite its advantages, the lungs have been largely underutilized to target ailments not only of systemic relevance but also several other grave conditions including lung cancer and tuberculosis. Polymeric nanocarriers (PNCs) have several advantages over other drug delivery vehicles including sustained release of moieties, ease of cellular internalization and improved targeting, and hence hold the promise to greatly augment the potential of OI therapies. …

An Integrated Framework For Configurable Product Assortment Planning, Seyed Ali Taghavi Behbahani

Wayne State University Dissertations

A manufacturer's assortment is the set of products or product configurations that the company builds and offers to its customers. While the literature on assortment planning is growing in recent years, it is primarily aimed at non-durable retail and grocery products. In this study, we develop an integrated framework for strategic assortment planning of configurable products, with a focus on the highly complex automotive industry. The facts that automobiles are highly configurable (with the number of buildable configurations running into thousands, tens of thousands, and even millions) with relatively low sales volumes and the stock-out rates at individual dealerships (even …

Biomechanical Stability Of A Supra-Acetabular Pedicle Screw Internal Fixation Device (Infix) Vs External Fixation And Plates For Vertically Unstable Pelvic Fractures, Jonathan M. Vigdorchik, Amanda O. Esquivel, Xin Jin, King H. Yang, Ndidi A. Onwudiwe, Rahul Vaidya

Wayne State University Associated BioMed Central Scholarship

Abstract

Background

We have recently developed a subcutaneous anterior pelvic fixation technique (INFIX). This internal fixator permits patients to sit, roll over in bed and lie on their sides without the cumbersome external appliances or their complications. The purpose of this study was to evaluate the biomechanical stability of this novel supraacetabular pedicle screw internal fixation construct (INFIX) and compare it to standard internal fixation and external fixation techniques in a single stance pelvic fracture model.

Methods

Nine synthetic pelves with a simulated anterior posterior compression type III injury were placed into three groups (External Fixator, INFIX and Internal Fixation). …

A Novel Algorithm To Form Stable Clusters In Vehicular Ad Hoc Networks On Highways, Zaydoun Y. Rawashdeh, Syed Mahmud

Wayne State University Associated BioMed Central Scholarship

Abstract

Clustering in vehicular ad hoc networks (VANET) is one of the control schemes used to make VANET global topology less dynamic. Many of the VANET clustering algorithms are derived from mobile ad hoc networks (MANET). However, VANET nodes are characterized by their high mobility, and the existence of VANET nodes in the same geographic proximity does not mean that they exhibit the same mobility patterns. Therefore, VANET clustering schemes should take into consideration the degree of the speed difference among neighboring nodes to produce relatively stable clustering structure. In this paper, we introduce a new clustering technique suitable for …

High Intensity Land Treatment (Hilt) Practices, John P. Martin, Ronald C. Sims

Reports

Land treatment is categorized in the Resource Conservation and Recovery Act of 1976 (RCRA) as one of the land disposal options for managing hazardous waste constituents within the defined treatment zone before such constituents can be transported to surface water, groundwater, or air. Under the authroity of Subtitle C of RCFA, the U.S. Environmental Protection Agency has promulgated regulations governing the treatment and disposal of hazardous wastes in land treatment units (40 CFR, Part 264, Subpart M, July 26, 1982). The objectives of this report were to identify land treatment facilities meeting the defined high intensity land treatment (HILT) criteria, …

Solving Problems In Water Quality, Utah Water Research Laboratory

Reports

No abstract provided.

Cee & Uwrl Research In Action, Utah Water Research Laboratory

Reports

Introduction: The Department of Civil and Environmental Engineer (CEE) and the Utah Water Research Laboratory (UWRL) have a symbiotic working relationship. The CEE Department provides the pricipal investigators with academic affiliation to the university while the UWRL provides faculty with a strong water research arena. Both the CEE department and the UWRL have been involved in research and problem solving for government agencies and private industry.

Information For Operation Of Water Supply Systems, L. Douglas James, Glen E. Stringham, J. Clair Batty

Reports

Introduction: Water requirements increase as more people use more water for domestic purposes. The increase is augmented as technological advances add to the water needs of agriculture and industry. Additional urban landscaping adds further to the demand. Simultaneously, the same forces increase demands for flood control, hydrelectric power, and navigation; and a more urbanized population want more flows preserved for productive natural environments, recreational use, and aesthetic enjoyment. The response over the years to these growing demands on water resources has been to supply increasing amounts of water and greater levels of development for other purposes by building more projects, …

Hydrologic Efficiency In Water Conservation, L. Douglas James

Reports

Introduction: The hydrologic cycle can be subdivided into three phases: 1)Humidity is transported within the atmosphere and becomes precipitation, and 2) Water moves downhill until eventually reaching the sea while all the time 3) Evapotranspiration returns exposed moisture to the atmosphere. During its movement, flowing water transports suspended sediments and dissolved minerals to reshape landforms and redistribute the mineral composition of the earth's surface throughout geologic time. It is during the second phase that flowing water can be diverted for uses that generally add to evaportranspiration (through consumptive use) and transport (through waste disposal). The water resources development that serves …

Optical Fibre Technology, Gerald Farrell

Articles

No abstract provided.

Applications Of Extenics To 2d-Space And 3d-Space, Florentin Smarandache, Victor Vladareanu

Branch Mathematics and Statistics Faculty and Staff Publications

In this article one proposes several numerical examples for applying the extension set to 2D- and 3D-spaces. While rectangular and prism geometrical figures can easily be decomposed from 2D and 3D into 1D linear problems, similarly for the circle and the sphere, it is not possible in general to do the same for other geometrical figures.