Engineering Commons^™

Mobility Of A Semiflexible Chain Confined In A Nanochannel, Douglas R. Tree, Yanwei Wang, Kevin D. Dorfman

Faculty Publications

The classic results of de Gennes and Odijk describe the mobility of a semiflexible chain confined in a nanochannel only in the limits of very weak and very strong confinement, respectively. Using Monte Carlo sampling of the Kirkwood diffusivity with full hydrodynamic interactions, we show that the mobility of a semiflexible chain exhibits a broad plateau as a function of extension before transitioning to an Odijk regime, and that the width of the plateau depends on the anisotropy of the monomers. For the particular case of DNA in a high ionic strength buffer, which has highly anisotropic monomers, we predict …

Novel Platform Development Using An Assembly Of Carbon Nanotube, Nanogold And Immobilized Rna Capture Element Towards Rapid, Selective Sensing Of Bacteria, Elizabeth I. Maurer, Kristen K. Comfort, Saber M. Hussain, John J. Schlager, Sharmila M. Mukhopadhyay

Chemical and Materials Engineering Faculty Publications

This study examines the creation of a nano-featured biosensor platform designed for the rapid and selective detection of the bacterium Escherichia coli. The foundation of this sensor is carbon nanotubes decorated with gold nanoparticles that are modified with a specific, surface adherent ribonucleic acid (RNA) sequence element. The multi-step sensor assembly was accomplished by growing carbon nanotubes on a graphite substrate, the direct synthesis of gold nanoparticles on the nanotube surface, and the attachment of thiolated RNA to the bound nanoparticles.

The application of the compounded nanomaterials for sensor development has the distinct advantage of retaining the electrical behavior …

Registering An Amateur-Built Light Sport Kit Aircraft, Kevin Condron

Aerospace Engineering

No abstract provided.

Testing And Validation Of An Autostainer, Nicholas Hanne

Biomedical Engineering

Histology performed by Cal Poly students for research projects and labs are currently performed by hand using a dipping technique. This technique is time consuming, expensive, imprecise, and often unrepeatable. Central Coast Pathology donated a Dako Autostainer to the Biomedical Engineering Department that can perform immunohistological stains of up to 48 samples simultaneously using tightly controlled reagent volumes and incubation times. Protocols are programmed into the machine and can be repeated under the same conditions every time with minimal preparation and exposure to potentially dangerous reagents. The autostainer was repaired and validated by comparing PECAM & BBI stains performed on …

Esem Analysis Of Mice Femurs With Varying Sost Levels, Patrick K. Mcclay

Biomedical Engineering

This project’s goal was to analyze the properties of the cortical femur on 100 mice bones from Lawrence Livermore National Laboratory. Analysis was limited to imaging which determined the ratio of bone volume to total volume (BV/TV) and osteocyte lacunae density. Mice were altered to knock out their SOST gene: a negative regulator of bone formation. Twelve groups were created to differentiate their treatment, duration, and phenotype. Transgenic (TG) mice had an overexpression of the SOST gene: they carried a bacterial artificial chromosome. Mice with limb defects (DEF) were the offspring of two TG mice and carried twice the amount …

Robotron, Fabian Rodriguez, Oscar Daniel Muneton, Adelaido Jimenez

Computer Engineering

Roborodentia 2012 is a competition where students and alumni could build an autonomous robot to perform a certain task for points. This report is about Robotron, the 3rd place winner of this competition, and how it came to be.

California Polytechnic State University Senior Project Winter-Spring 2012, Roborodentia Xvii, Stack-E, Alejandro Ignacio, Austin Hobbs

Computer Engineering

The main goal for our project is to design and build a functional autonomous robot that is capable of navigating an open arena while avoiding obstacles, as well as identify other objects or cans on the field. It must also be capable of stacking and containing these cans. Deliverables will include the fully assembled robot chassis containing the essential hardware components needed to accomplish the navigation and movement, as well as capabilities like identification of objects and stacking of cans. Alongside the hardware, there will also be software developed to showcase these capabilities of the robot design, including the vision …

Corrosion Of Stainless Steel 316l And Astm F75 Cobalt Chromium Alloy During Immersion Testing In Silver Salt Solutions, Meagan Higgins

Materials Engineering

This study evaluates the potential effects of silver salts on biocompatible metals used for prostheses during the chemical reduction process to produce a silver antimicrobial layer on the metal’s surface. Samples of two biocompatible metals were obtained: Stainless Steel 316L and ASTM F75 Cobalt Chromium Alloy. Three different silver salts were also acquired: silver nitrate, silver sulfadiazine, and silver chloride. Specimens of each metal were cut to size using a 4-1/2 inch aluminum oxide, 40 grit, cut off wheel for metal, attached to a Dewalt Angle Grinder. The biocompatible metal samples were then subject to either Solution 1, water with …

Design, Construction And Testing Of A Walnut Cracker, Michael Dasso

BioResource and Agricultural Engineering

This senior project involves the design, construction and testing of a walnut cracker for Beecher Lane Walnut of Stockton California. This prototype cracker is one piece of a walnut processing system to package walnuts. Beecher Lane Walnut currently utilizes a conical cracker design whereas this new design entails a twin barrel configuration.

The goal of this project was to design, construct and test a prototype walnut cracker that would help determine the variables necessary to yield the highest percentage of walnut halves.

The testing of this walnut cracker involved two varieties: Eureka and Chandler. Testing indicated the optimal output of …

Design And Fabrication Of A Concrete Washout Bin, Bryce Allen Dafonte

BioResource and Agricultural Engineering

The project encompassed the design and fabrication of a concrete washout bin. The design parameters were provided by feedback from multiple professors who have used the current concrete washout area, and would like a newer, more effective washout bin to use for multiple lab sessions throughout the school year. The concrete washout bin needed to be large enough to hold excess amounts of waste materials, yet include a low profile to aid the students in being able to clean multiple mixers and tools. A liner will be held in place to ensure that water does not leak out, but also …

Solid Set Sprinkler Design For An Apricot Orchard, Kyle Moeller

BioResource and Agricultural Engineering

The goal of this project was to design a solid set sprinkler system as well as a cost analysis for a 60 acre field. This allows for water to be distributed throughout an entire field at low flow rates allowing water to be used more efficiently and effectively. Completing a design such as this will allow some cost saving by the farmer throughout the systems use.

Implementation, Design, And Cost Analysis Of A Concrete Washout System, Omar Adina

BioResource and Agricultural Engineering

With the increase of environmental pollution in today’s world, many strategies and regulations are being enforced. These enforcements come from the state and federal governments, but public awareness is often overlooked. Stormwater regulations here in California have dramatically changed over the last decade, as the topic is investigated more often.

This senior project encompassed the design prototype and cost analysis of a permanent concrete washout station for the BioResource and Agricultural Engineering Department at California Polytechnic State University, San Luis Obispo. The design parameters given were to construct a steel bin for the excess concrete to be dumped into during …

Using Student Ambassadors To Relay Themes From Changing The Conversation In Engineering First Year Seminars, Sarah Rzasa Zappe, Melissa Marshall, Enrique D. Gomez, Esther W. Gomez, Angela D. Lueking

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper describes the efforts at a large mid-Atlantic university to integrate themes from Changing the Conversation into First Year Seminars. Changing the Conversation, a 2008 book by the National Academy of Engineering, found that both male and female students were more attracted to messages describing engineering in terms relating to societal impact, such as the phrases, "Engineering makes a world of difference" and "Engineering is essential to our health, happiness, and safety." Although the research was conducted with younger students, the potential for using these themes in the undergraduate curricula could have the potential to impact persistence in engineering, …

An Inverted Teaching Model For A Mechanics Of Materials Course, Jeffery S. Thomas, Timothy A. Philpot

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Instructors at Missouri University of Science and Technology have been offering certain sections of a mechanics of materials course in an inverted format for the past two years. In this format, students learn the concepts outside of class, using a textbook, animations and videos developed by the authors, and work on homework either individually or in groups during the optional class time. Students take eight multiple-choice exams and a final exam that is common to both the inverted sections and the more traditional lecture-based sections. Homework in the inverted sections is assigned but not graded. The in-class exams are given …

Process Optimization For Friction-Stir-Welded Martensitic Steel, M. Ghosh, K. Kumar, R. S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

Advanced high-strength M190 steel sheets were joined by friction-stir welding under different tool rotational and traversing speeds. the optical microstructure of the joints exhibited complete martensite and partial martensite at the weld nugget depending on the cooling rate during welding. the first heat-affected zone outside of the weld nugget revealed ferrite-pearlite phase aggregate, and the second heat-affected zone showed a tempered martensitic structure. the interplay of process variables in terms of peak temperature and cooling rate was studied to observe their effect on joint efficiency under shear testing. the peak hardness at weld nugget was close to the parent alloy …

Documenting The Construction Of A Plain Concrete Bridge Deck And An Internally Cured Bridge Deck, Carmelo Di Bella, John Schlitter, Neal Carboneau, Jason Weiss

Indiana Local Technical Assistance Program (LTAP) Technical Reports

Durable and long lasting concrete is important, especially for bridge decks, which are susceptible to premature cracking and corrosion of the reinforcing steel. To increase the durability of the concrete and its service life, many transportation agencies use high-strength concretes. However, high-strength concretes often have problems with early age cracking due to shrinkage. These cracks can then open a path for chloride ions (found in road salts) to reach the reinforcing steel. The results of this research, which compared bridge installations on two structures in Monroe County, Indiana, confirm that internally cured concrete presents a better alternative to traditional plain …

Design Of Dc Light Bulb For The Dc House Project, Kent Chin Liang

Master's Theses

This thesis focuses on the design and implementation of an economical and energy efficient DC Light Bulb for the DC House Project. For the DC lighting system, emphasis is on the DC-DC LED driver, dimmer circuit, LED lighting array, and physical packing design. In this paper, a DC Light Bulb is designed, simulated, and tested to operate at a wide input voltage ranging from 24 VDC to 72 VDC, to be fully dimmable using pulse-width modulation technique, and to produce lumination intensities equivalent to a standard 100 W A19 incandescent light bulb at one-tenth the total power consumption. The DC …

Three-Dimensional Geometry Of The Human Carotid Artery, Alexey Kamenskiy, Jason N. Mactaggart, Iraklis I. Pipinos, Jai Bikhchandani, Yuris A. Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Accurate characterization of carotid artery geometry is vital to our understanding of the pathogenesis of atherosclerosis. Three-dimensional computer reconstructions based on medical imaging are now ubiquitous; however, mean carotid artery geometry has not yet been comprehensively characterized. The goal of this work was to build and study such geometry based on data from 16 male patients with severe carotid artery disease. Results of computerized tomography angiography were used to analyze the cross-sectional images implementing a semiautomated segmentation algorithm. Extracted data were used to reconstruct the mean three-dimensional geometry and to determine average values and variability of bifurcation and planarity angles, …

Three-Dimensional Modeling Of Carbon/Epoxy To Titanium Single-Lap Joints With Variable Adhesive Recess Length, Yi Hua, Linxia Gu, Michael Trogdon

Department of Mechanical and Materials Engineering: Faculty Publications

The objective of this paper was to investigate the performance of recessed single-lap joints with dissimilar adherends through the finite element method. The influence of material and geometric nonlinearity of the adhesive as well as the impact of the recess length was examined in terms of maximum principal stresses. The strength of the joint was obtained as the load to initiate the crack propagation. Results suggested that either adding a spew fillet or considering the adhesive plasticity led to reduced peak stresses at the edge of the adhesive layer. The presence of a spew fillet in the single-lap joint with …

Day/Night Band Imager For A Cubesat, Eric Stanton

Electrical Engineering

Day/Night Band (DNB) earth sensing and meteorological systems like the Defense Meteorological Satellite Program (DMSP) Operational Linescan System (OLS) provide visible wavelength imagery 24 hours a day that is used primarily for cloud imaging in support of weather forecasting. This paper describes a compact push-broom imager that meets low light imaging requirements for DMSP OLS and the NOAA/NASA Joint Polar Satellite System (JPSS) as documented in the Integrated Operational Requirements Document [1] (IORD) including the imager design, system level concepts of operation for data collection, radiometric and spatial calibration, and data transmission to Earth. This small, lightweight imager complies with …

Effect Of Fluxing Additive On Sintering Temperature, Microstructure And Properties Of Batio3, Yaseen Iqbal, Asad Jamal, Riaz Ullah, M. Naeem Khan, Rick Ubic

Materials Science and Engineering Faculty Publications and Presentations

Various fluxing materials are added to technical ceramics in an attempt to lower their sintering temperatures and make their processing economical. The effect of 0·3wt% Li₂CO₃ addition on the phase, microstructure, phase transition temperatures and dielectric properties of BaTiO₃ was investigated in the present study. The addition of 0·3wt% Li2CO₃ was observed to lower the optimum sintering temperature by ∼200^◦C with no second phase formation and cause a five-fold reduction in grain size. Rhombohedral-to-orthorhombic and tetragonal-to-cubic phase transitions at the expected temperatures were evident from the Raman spectra, but the orthorhombic-totetragonal phase transition …

Regional Models Of Internal Tides, Glenn S. Carter, Oliver B. Fringer, Edward D. Zaron

Civil and Environmental Engineering Faculty Publications and Presentations

Internal tides are ubiquitous in the ocean, and they play an important role in a range of ocean processes, for example, particle dispersal, acoustics, and vertical buoyancy flux. The wavelength of internal tides can be as much as 250 km in the open ocean, but as the generation of these tides depends on the angle between the depth-averaged current and the topography, there can be considerable local spatial variability. This range of scales makes it difficult to develop a comprehensive understanding of the processes involved from observations alone. Regional numerical modeling provides a way to study the generation and early …

Analysis Of The Impacts Of Transit Signal Priority On Bus Bunching And Performance, Eric Albright, Miguel Andres Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Efficient and reliable public transit systems provide opportunities to reduce congestion, emissions in urban areas and provide access and mobility to residents. Headway, or the time difference between departing or arriving vehicles, is a useful measure to gauge bus transit performance; because short headways can lead to bus bunching incidents that quickly degrade transit level of service. While Transit Signal Priority (TSP) has been shown to decrease travel time and delay experienced by buses, little work has shown how TSP may affect bus bunching. This research attempts to understand the characteristics of bus trips, especially TSP, that prevent or promote …

An Evaluation Of The Impacts Of An Adaptive Coordinated Traffic Signal System On Transit Performance: A Case Study On Powell Boulevard (Portland, Oregon), Courtney Natasha Slavin, Miguel A. Figliozzi, Wei Feng

Civil and Environmental Engineering Faculty Publications and Presentations

Powell Boulevard is a prime example of a congested urban arterial; this roadway connects US-26 to downtown Portland, Oregon. This facility is one of the most congested arterial corridors in the Portland-metropolitan region. The City of Portland implemented the Sydney Coordinated Adaptive Traffic System (SCATS) in October 2011 in order to improve the operations of the corridor. SCATS has been implemented in a few US cities with mixed results so far. A properly calibrated system can have a significant positive impact on the performance of the traffic signals but its impact on transit performance has not been documented. This was …

Bus Fleet Type And Age Replacement Optimization: A Case Study Utilizing King County Metro Fleet Data, Wei Feng, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Bus fleet data have consistently shown that vehicle operating and maintenance costs increase as vehicles age. A fleet manager has to deal with the tradeoff between the lower operating and maintenance costs of newer fleets and their higher initial capital costs as well as the tradeoff between conventional and fuel efficient bus technologies. This study formulates and implements a fleet replacement optimization framework that is applied to a case study that compares two bus types: a conventional diesel and a hybrid bus. Employing real-world bus fleet data from King County Metro (Washington State, USA) multiple scenarios are examined to account …

The Case For Open Source Appropriate Technology, Joshua M. Pearce

Michigan Tech Publications, Part 1

Much of the widespread poverty, environmental desecration, and waste of human life seen around the globe could be prevented by known (to humanity as a whole) technologies, many of which are simply not available to those that need it. This lack of access to critical information for sustainable development is directly responsible for a morally and ethically unacceptable level of human suffering and death. A solution to this general problem is the concept of open source appropriate technology or OSAT, which refers to technologies that provide for sustainable development while being designed in the same fashion as free and open …

Bridgeless Step/Up Unity Power Factor Rectifier For High Voltage Applications, Aysha Kemadish Al-Kaabi

Theses

Power electronic devices with front- end rectifier are widely used in computer, communication and electric vehicle industries. These rectifiers are nonlinear in nature and generate current harmonics which pollute utility power. International harmonic standards (e.g., IEC 61000-3-2 and EN 61000-3-2) have been put in place to confine power pollution. These standards limit the current harmonics generated by loads to a specified threshold depending on load power and application. In other words, a high power factor is required.

Power supplies with active power factor correction (PFC) techniques are becoming necessary for many types of electronic equipment to meet the harmonic regulations …

Optimization Of Co2 Wag Processes In A Selected Carbonate Reservoir: Laboratory Study, Mohamed Elwy Abdalla Amin

Theses

Miscible gas flooding using carbon dioxide is currently investigated as a possible EOR process for a number of United Arab Emirates (UAE) reservoirs. The major factors affecting the implementation of CO₂ floods are the availability of CO₂ at economic prices and the net utilization ratio of CO₂ per barrel of additional oil recovered.Minimizing net utilization requires controlling the high mobility ratio which causes lower sweep. To control the mobility ratio, the Water-Alternating CO₂-gas (WAG) technique is proposed.

The objective of this work is to experimentally assess the recovery of oil with CO₂ injection in …

Ifalcon: A Neural Architecture For Hierarchical Planning, Budhitama Subagdja, Ah-Hwee Tan

Research Collection School Of Computing and Information Systems

Hierarchical planning is an approach of planning by composing and executing hierarchically arranged predefined plans on the fly to solve some problems. This approach commonly relies on a domain expert providing all semantic and structural knowledge. One challenge is how the system deals with incomplete ill-defined knowledge while the solution can be achieved on the fly. Most symbolic-based hierarchical planners have been devised to allow the knowledge to be described expressively. However, in some cases, it is still difficult to produce the appropriate knowledge due to the complexity of the problem domain especially if the missing knowledge must be acquired …

Stochastic Dominance In Stochastic Dcops For Risk-Sensitive Applications, Nguyen Duc Thien, William Yeoh, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Distributed constraint optimization problems (DCOPs) are well-suited for modeling multi-agent coordination problems where the primary interactions are between local subsets of agents. However, one limitation of DCOPs is the assumption that the constraint rewards are without uncertainty. Researchers have thus extended DCOPs to Stochastic DCOPs (SDCOPs), where rewards are sampled from known probability distribution reward functions, and introduced algorithms to find solutions with the largest expected reward. Unfortunately, such a solution might be very risky, that is, very likely to result in a poor reward. Thus, in this paper, we make three contributions: (1) we propose a stricter objective for …