Engineering Commons^™

Merrill-Cazier Library Gas Exhibition, Betty Rozum, Andrew Wesolek, Pamela N. Martin

Education and Outreach

This exhibition, presented in the Merrill-Cazier Library, captured the history and accomplishments of the GAS program. Click the download button to see a PowerPoint presentation featuring images and text from the exhibition.

Model Of A Mechanical Clock Escapement, John Wagner, David Moline, Eugene Vold

Publications

The mechanical tower clock originated in Europe during the 14th century to sound hourly bells and later display hands on a dial. An important innovation was the escapement mechanism, which converts stored energy into oscillatory motion for fixed time intervals through the pendulum swing. Previous work has modeled the escapement mechanism in terms of inelastic and elastic collisions. We derive and experimentally verify a theoretical model in terms of impulsive differential equations for the Graham escapement mechanism in a Seth Thomas tower clock. The model offers insight into the clock’s mechanical behavior and the functionality of the deadbeat escapement mechanism.

Interdisciplinary Modeling: Water-Related Issues And Changing Climate - New Mexico State University, Laurel Saito, Alexander Fernald, Timothy Link

All ECSTATIC Materials

Graduate course in interdisciplinary modeling: water-related issues and climate change offered at University of Nevada, Reno in Summer 2012.

Economic Impact On Annual Profit Of A Retail Inventory Management System When Using Rfid And Considering Discrepancy Ratio, Inaccuracy Ratio, Backorders, And Federal Income Tax, Liyuan Zhang

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Radio Frequency Identification (RFID) emerged as an important technology with the ability to improve the efficiency and accuracy of object tracking. It has brought cost savings and added value to a wide variety of fields. Retail inventory management system is one of the beneficial fields. In order to better satisfy customers and to improve profit, retailers demand high accuracy in inventory management to service customers without redundant on-hand inventories. The RFID technology, which provides more accurate tracking, can improve retailers’ profit.

Two accuracy factors were proposed to determine the difference in the profit of a retailer inventory management system caused …

Nanowire Giant Magnetoresistance Thin Films For Magnetic Sensors, Bryan Cox

Doctoral Dissertations

This dissertation details a novel method to fabricate magnetic sensors using nanowire giant magnetoresistance (GMR) thin films. In 1988, Albert Fert and Peter Grünberg both independently discovered a new physical phenomenon called GMR. GMR is a quantum mechanical effect found in thin film materials that are composed of alternating nanoscale ferromagnetic and non-magnetic conductive layers. When a GMR material is in the presence of a magnetic field, a change in electrical resistance is observed. The GMR effect has been utilized to produce magnetic sensors that have been used in a variety of applications, such as computer hard drive read heads, …

A Nanostructured Fabry-Perot Interferometer For Label-Free Biodetection, Tianhua Zhang

Doctoral Dissertations

A polymer nanostructured Fabry-Perot interferometer (FPI) based biosensor has been developed, fabricated, and tested. Different from a conventional FPI, this nanostructured FPI has a layer of Au-coated nanopores inside its cavity. The Au-coated nanostructure layer offers significant enhancement of optical transducing signals due to the localized surface Plasmon resonance (L-SPR) effect. Compared to a traditional FPI for label-free biosensing applications, the polymer nanostructured FPI based biosensor offers increased sensing surface area, extended penetration depth of the excitation light, and amplification of optical transducing signals. Using a nanostructured FPI, measurements taken had great improvements in free spectral range (FSR), finesse, and …

Propagation Of Ultrasound Through Freshly Excised Human Calvarium, Armando Garcia Noguera

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The propagation of ultrasound through complex biological media, such as the human calvarium, poses a great challenge for modern medicine. Several ultrasonic techniques commonly used for treatment and diagnosis in most of the human body are still difficult to apply to the human brain, in part, because of the properties of the skull. Moreover, an understanding of the biomechanics of transcranial ultrasound may provide needed insight into the problem of blast wave induced traumatic brain injury (TBI). In the present study, the spatial variability of ultrasonic properties was evaluated for relevant frequencies of 0.5, 1, and 2.25 MHz. A total …

Initial Design Of A Multimodal Collaborative Mobile Application For Real Time Decision Making, Gregory M. Burnett, Thomas Wischgoll, Victor Finomore, Candace Washington

Computer Science and Engineering Faculty Publications

Mobile devices, smartphones and tablets, are continually expanding their computational performance capabilities through improved processing, interconnectivity network abilities, resource management and ease of use user interfaces. As such they are gaining interestas a means tosupport on-the-move remote collaboration for military personnel executing real time decision making tasks. This paper focuses on a software-based implementation of a prototype multimodal Android application that was designed to capture and disseminate real time battlefield perspectives to distributed entities. Moreover the mobile application enables remote experts to interactively collaborate through multimodal functionality to provide directives to the mobile userthat should be applied to the local …

The Multi-Product Price-Setting Newsvendor With Resource Capacity Constraints, Chase C. Murray, Abhijit Gosavi, Debabrata Talukdar

Engineering Management and Systems Engineering Faculty Research & Creative Works

In this paper, we consider a newsvendor problem commonly encountered in retail stores that cater to budget-sensitive shoppers. the newsvendor sells multiple products, and in addition to determining order quantities must also determine the selling price of each product sold. the demand for each product is of a stochastic nature and depends on the demands of other products, i.e., is cross-elastic. We transform the objective function into a form that is amenable to developing integer-programming solutions and then develop a numeric optimization procedure rooted in the Nelder-Mead search technique. We obtain encouraging numerical results on some small-scale and large-scale problems. …

Acuta Enews July 2012 Vol. 41, No. 7

ACUTA Newsletters

In this issue....

1 What Matters to You

2 Overheard via eMail: Legacy Systems

3 UC Cloud Security: Avoiding an Identity Crisis

4 Board Report

4 Annual Dues Reminders Mailed July 3

5 Sense- Making: Why People Won't Be Replaced by Computers Anytime Soon

6 Young Professionals-- What's in It for You?

6 Webinar FREE to members

7 Info Links

8 PCI Compliance of Increasing Importance to Higher Ed

8 ACUTA Member Benefit: Post and Access RFPs

9 Welcome New Members

9 Check It Out

The Effects Of The Flyer Plate's Radius Of Curvature On The Performance Of An Explosively Formed Projectile, Phillip R. Mulligan, Jason Baird, Joshua Hoffman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

An explosively formed projectile (EFP) is known for its ability to penetrate vehicle armor effectively. Understanding how an EFP’s physical parameters affect its performance is crucial to development of armor capable of defeating such devices. The present study uses two flyer plate radii of curvature to identify the experimental effects of the flyer plate’s radius of curvature on the measured projectile velocity, depth of penetration, and projectile shape. The Gurney equation is an algebraic relationship for estimating the velocity imparted to a metal plate in contact with detonating explosives. The authors of this research used a form of the Gurney …

Brain Recorder, Anthony M. Garcia

Computer Engineering

Electroencephalography (EEG) is the recording of electrical activity along the scalp. Our mind regulates its activities by means of electric waves which are registered in the brain, emitting tiny electrochemical impulses of varied frequencies, which can be registered by an electroencephalogram. These “brainwave” frequencies are split into different bands. There is ongoing research that attempts to correlate the frequencies in the different bands to different emotional states and levels of concentration. With the increase in availability of commercial EEG devices, such studies can be sped up by making the collection of data easier, faster, and mobile. Creating a mobile application …

Weightlifting Performance Is Related To Kinematic And Kinetic Patterns Of The Hip And Knee Joints, Kristof Kipp, Josh Redden, Michelle B. Sabick, Chad Harris

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The purpose of this study was to investigate correlations between biomechanical outcome measures and weightlifting performance. Joint kinematics and kinetics of the hip, knee, and ankle were calculated while ten subjects performed a clean at 85% of 1-RM. Kinematic and kinetic time-series patterns were extracted with principal components analysis. Discrete scores for each time-series pattern were calculated and used to determine how each pattern was related to body-mass normalized 1-RM. Two hip kinematic and two knee kinetic patterns were significantly correlated with relative 1-RM. The kinematic patterns captured hip and trunk motions during the first pull and hip joint motion …

Nanoencapsulated Copper Pthalocyanine As Photodynamic Antimicrobial Chemotherapy, Prathima Arrabelly

All Capstone Projects

The growing resistance developed by microbes towards antimicrobial agents has driven our focus on developing alternative treatment modalities such as Photodynamic antimicrobial chemotherapy (PACT). It would be difficult for the microbes to develop resistance towards singlet oxygen generated during the PACT process. Photosensitizers are the vehicles of the transfer and translation of light energy into a type II chemical reaction (singlet oxygen generation) in photodynamic antimicrobial chemotherapy. PACT is proposed as a potential, low cost approach to treatment of locally occurring infection.

Photodynamic inactivation (PDI) of Escherichia coli and Staphylococcus aureus has been studied in cultures treated with photoactivated copper …

2012 Safety Belt Usage Survey In Kentucky, Kenneth R. Agent, Eric R. Green

Kentucky Transportation Center Research Report

The objective of this study was to establish 2012 safety belt and child safety seat usage rates in Kentucky. The 2012 survey continues to document the results after enactment of the original “secondary enforcement” statewide mandatory safety belt law in 1994 and the subsequent change to “primary enforcement” which was enacted in 2006. Data were collected at 160 randomly selected sites in 18 counties across Kentucky. Data from the individual sites were combined into a statewide percentage considering roadway functional classification, county and vehicle miles traveled.

Microwave Absorption Characteristics Of Substituted Ba 0.5sr 0.5m Xfe (12-2x)O 19 (M = Co ²⁺-Zr 4+ And Co 2+-Ti 4+) Sintered Ferrite At X-Band, Charanjeet Singh, S. Bindra Narang, Marina Koledintseva

Electrical and Computer Engineering Faculty Research & Creative Works

The microwave reflection loss (RL) of four series of synthesized ferrites, Ba_0.5Sr_0.5Co_xZr_xFe_{(12 - 2x)}O₁₉ and Ba_0.5Sr_0.5Co_xTi_xFe_{(12 - 2x)}O₁₉, have been measured using network analyzer in the frequency range from 8.2 to 12.4 GHz. The comprehensive analysis of RL is carried out as a function of substitution, frequency, and thickness. The various models contributing to large RL are described. The composition accompanying maximum microwave absorption is suggested. © 2012 Wiley Periodicals, Inc.

Spin Diffusion In Bulk Gan Measured With Mnas Spin Injector, Shafat Jahangir, Fatih Dogan, Hyun Kum, Aurelien Manchon, Pallab Bhattacharya

Materials Science and Engineering Faculty Research & Creative Works

Spin injection and precession in bulk wurtzite n-GaN with different doping densities are demonstrated with a ferromagnetic MnAs contact using the three-terminal Hanle measurement technique. Theoretical analysis using minimum fitting parameters indicates that the spin accumulation is primarily in the n-GaN channel rather than at the ferromagnet (FM)/semiconductor (SC) interface states. Spin relaxation in GaN is interpreted in terms of the D'yakonov-Perel mechanism, yielding a maximum spin lifetime of 44 ps and a spin diffusion length of 175 nm at room temperature. Our results indicate that epitaxial ferromagnetic MnAs is a suitable high-temperature spin injector for GaN.

Initial Study And Verification Of A Distributed Fiber Optic Corrosion Monitoring System For Transportation Structures, Hai Xiao, Genda Chen, Zhan Gao, Ying Huang, Fujian Tang

Electrical and Computer Engineering Faculty Research & Creative Works

For this study, a novel optical fiber sensing system was developed and tested for the monitoring of corrosion in transportation systems. The optical fiber sensing system consists of a reference long period fiber gratings (LPFG) sensor for corrosive environmental monitoring and a LPFG sensor coated with a thin film of nano iron and silica particles for steel corrosion monitoring. The environmental effects (such as pH and temperature) are compensated by the use of the reference LPFG sensor. The sensor design, simulation, and experimental validation were performed in this study to investigate the feasibility of the proposed sensing system for corrosion …

Behavior Of Full-Scale Rc T-Beams Strengthened In Shear With Externally Bonded Frp Sheets, Abdeldjelil Belarbi, Sang Wook Bae, Antonio Brancaccio

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Recently many research studies have investigated the shear behavior of reinforced concrete (RC) beams strengthened with fiber-reinforced polymer (FRP) composites. However, most were conducted on small-scale specimens. Thus, analytical models and design equations developed from those studies may not predict the actual behavior of large-scale RC beams strengthened with FRPs. in this study, an experimental study was performed on this topic using full-scale RC T-beams in order to understand the behavior of full-scale bridge beams strengthened in shear with FRP. the main parameters investigated in this study were the transverse steel reinforcement ratio and the effect of mechanical anchorage systems. …

Tissue Engineering A Blood Vessel Mimic While Monitoring Contamination Through Sterility Assurance Testing, Navid Djassemi

Master's Theses

Tissue Engineering A Blood Vessel Mimic While Monitoring Contamination Through Sterility Assurance Testing

Navid Djassemi

Tissue engineering blood vessel mimics has been proposed as a method to analyze the endothelial cell response to intravascular devices that are used in today’s clinical settings for the treatment of cardiovascular disease. Thus, the development of in vitro blood vessel mimics (BVMs) in Cal Poly’s Tissue Engineering Lab has introduced the possibility of assessing the characteristics of cellular response to past, present, and future intravascular devices that aim at treating coronary artery disease.

This thesis aimed at improving the methods and procedures utilized in …

Hot-Wire Anemometer For The Boundary Layer Data System, William D. Neumeister

Master's Theses

Hot-wire anemometry has been routinely employed for laboratory measurements of turbulence for decades. This thesis presents a hot-wire anemometer suitable for use with the Boundary Layer Data System (BLDS). BLDS provides a unique platform for in- flight measurements because of its small, self-contained, robust design and flexible architecture. Addition of a hot-wire anemometer would provide BLDS with a sensor that could directly measure flow velocity fluctuations caused by turbulence. Hot-wires are commonly operated in constant-temperature mode for high frequency response, but require a carefully tuned bridge. The constant-voltage anemometer (CVA) uses a simple op-amp circuit to improve frequency response over …

On Establishing Elastic–Plastic Properties Of A Sphere By Indentation Testing, J. K. Phadikar, T. A. Bogetti, Anette M. Karlsson

Mechanical Engineering Faculty Publications

Instrumented indentation is a popular technique for determining mechanical properties of materials. Currently, the evaluation techniques of instrumented indentation are mostly limited to a flat substrate being indented by various shaped indenters (e.g., conical or spherical). This work investigates the possibility of extending instrumented indentation to non-flat surfaces. To this end, conical indentation of a sphere is investigated where two methodologies for establishing mechanical properties are explored. In the first approach, a semi-analytical approach is employed to determine the elastic modulus of the sphere utilizing the elastic unloading response (the “unloading slope”). In the second method, reverse analysis based on …

Chalcogenide Microsphere Fabricated From Fiber Tapers Using Contact With A High-Temperature Ceramic Surface, Pengfei Wang, Ganapathy Murugan, Gilberto Bramilla, Ming Ding, Yuliya Semenova, Qiang Wu, Gerald Farrell

Articles

The fabrication 1 and characterization of a 2 chalcogenide glass microsphere resonator has been demonstrated. 3 At wavelengths near 1550 nm, whispering gallery mode 4 resonances can be efficiently excited in a 74-μm-diameter 5 chalcogenide glass microsphere via evanescent coupling using a 6 tapered silica glass fiber with a waist diameter of circa 2 μm. 7 Resonances with Q-factors greater than 105 were observed. 8 Due to the high nonlinearity properties of the chalcogenide 9 material and the ease of fabrication process, chalcogenide 10 microspheres offer the potential for robustly assembled fully 11 integrated photonic devices. 12 Index Terms—Chalcogenide

Developing Archetypes For Domestic Dwellings:An Irish Case Study, Albert Famuyibo, Aidan Duffy, Paul Strachan

Articles

Stock modelling, based on representative archetypes, is a promising tool for exploring areas for resource and emission reductions in the residential sector. The use of archetypes developed using detailed statistical analysis (multi-linear regression analysis, clustering and descriptive statistics) rather than traditional qualitative techniques allows a more accurate representation of the overall building stock variability in terms of geometric form, constructional materials and operation. This paper presents a methodology for the development of archetypes based on information from literature and a sample of detailed energy-related housing data. The methodology involves a literature review of studies to identify the most important variables …

Kentucky Safety Belt Methodology, Kenneth R. Agent, Eric R. Green, Ronald Langley

Kentucky Transportation Center Research Report

The National Highway Traffic Safety Administration (NHTSA) has issued new Uniform Criteria for State Observational Surveys of Seat Belt Use. The final rule was published in Federal Register Volume 76, Number 63. Following is a summary of the methodology Kentucky will use to comply with the criteria described in the final rule. The methodology considers the experience of the past 30 years of safety belt data collection in Kentucky along with the guidelines contained in the final rule. The new methodology will be implemented beginning with the 2013 statewide survey.

Development Of System Reliability Models For Railway Bridges, Anna Maria Rakoczy

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Performance of the railway transportation network depends on the reliability of railway bridges, which can be affected by various forms of deterioration and extreme environmental conditions. More than half of the railway bridges in US were built before 1950 and many show signs of distress. There is a need for efficient methods to evaluate the safety reserve in the railway bridges by identification of the most sensitive parts of the bridge.

An accurate estimation of remaining fatigue life of a structural component is very important in prioritizing bridge rehabilitation and replacement. However, existing procedures to evaluate the fatigue behavior of …

The Role Of Rare Earth Dopants In Semiconducting Host System For Spin Electronic Devices, Juan A. Colon Santana

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The doping of a wide band gap insulator offers an opportunity to increase the coupling between free carriers and magnetic impurities under the magnetic polaron model, leading to an enhanced in the Curie temperature of the host compound, critical for the fabrication of devices with magnetic properties. Some rare earth elements have large intrinsic magnetic moments due to unfilled 4d orbitals, and have been readily incorporated in materials for optical applications. Here the rare earths gadolinium and cerium were explored either as dopants or as part of the high-K semiconducting compound for the fabrication of magnetic heterojunction devices with magnetic …

Methods For Fast Evaluation Of Self-Energy Matrices In Tight-Binding Modeling Of Electron Transport Systems, Jun Z. Huang, Weng Cho Chew, Yumao Wu, Li (Lijun) Jun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

Simulation of quantum carrier transport in nanodevices with non-equilibrium Green's function approach is computationally very challenging. One major part of the computational burden is the calculation of self-energy matrices. The calculation in tight-binding schemes usually requires dealing with matrices of the size of a unit cell in the leads. Since a unit cell always consists of several planes (for example, in silicon nanowire, four atomic planes for [100] crystal orientation and six for [111] and [112]), we show in this paper that a condensed Hamiltonian matrix can be constructed with reduced dimension (∼ 1 / 4 of the original size …

Alternative Aefie-Efie Method For Broadband Cem Simulations, Jia Liu, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

It is well known that electric field integral equation (EFIE) has the low frequency breakdown problem due to the decoupling of electric and magnetic field. Augmented electric field integral equation (AEFIE) method overcomes the low frequency breakdown. However, its performance degrades with the increasing frequency. To obtain a unified method that works for both low and high frequencies, a novel method using the EFIE complement process inside AEFIE is proposed. Numerical results demonstrated that this alternative AEFIE-EFIE method is able to extend integral equations to wide band applications. © 2012 Wiley Periodicals, Inc.

Design And Analysis Of A Dynamically Configured Log-Based Distributed Security Event Detection Methodology, Michael R. Grimaila, Justin M. Myers, Robert F. Mills, Gilbert L. Peterson

Faculty Publications

Military and defense organizations rely upon the security of data stored in, and communicated through, their cyber infrastructure to fulfill their mission objectives. It is essential to identify threats to the cyber infrastructure in a timely manner, so that mission risks can be recognized and mitigated. Centralized event logging and correlation is a proven method for identifying threats to cyber resources. However, centralized event logging is inflexible and does not scale well, because it consumes excessive network bandwidth and imposes significant storage and processing requirements on the central event log server. In this paper, we present a flexible, distributed event …