Engineering Commons^™

Nonuniformity In Lattice Contraction Of Bismuth Nanoclusters Heated Near Its Melting Point, A. Esmail, M. Abdel-Fattah, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The structural properties of bismuth nanoclusters were investigated with transmission high-energy electron diffraction from room temperature up to 525 ± 6 K. The Bi nanoclusters were fabricated by thermal evaporation at room temperature on transmission electron microscope grids coated with an ultrathin carbon film, followed by thermal and femtosecond laser annealing. The annealed sample had an average cluster size of ∼14 nm along the minor axis and ∼16 nm along the major axis. The Debye temperature of the annealed nanoclusters was found to be 53 ± 6 K along the [012] direction and 86 ± 9 K along the [110] …

Special Issue On Information Dissemination And New Services In P2p Systems, Min Song, Sachin Shetty, Wenbin Jiang, E. K. Park

Electrical & Computer Engineering Faculty Publications

Information dissemination is an important P2P application that has received considerable research attention in recent years. P2P information dissemination systems range from simple file sharing applications to more complex systems that allows users to securely and efficiently publish, organize, index, search, update and retrieve data in a distributed storage medium. For complex P2P information dissemination systems, there is a need for features which include security, anonymity, fairness, scalability, resource management, and organization capabilities. For effective information dissemination, following features of P2P systems and infrastructure need to be updated: distributed object location and routing mechanisms, novel approaches to content replication, caching …

Precise Control Of Highly Ordered Arrays Of Nested Semiconductor/Metal Nanotubes, Diefeng Gu, Helmut Baumgart, Kandabara Tapily, Pragya Shrestha, Gon Namkoong, Xianyu Ao, Frank Müller

Electrical & Computer Engineering Faculty Publications

Lithographically defined microporous templates in conjunction with the atomic layer deposition (ALD) technique enable remarkable control of complex novel nested nanotube structures. So far three-dimensional control of physical process parameters has not been fully realized with high precision resolution, and requires optimization in order to achieve a wider range of potential applications. Furthermore, the combination of composite insulating oxide layers alternating with semiconducting layers and metals can provide various types of novel applications and eventually provide unique and advanced levels of multifunctional nanoscale devices. Semiconducting TiO₂ nanotubes have potential applications in photovoltaic devices. The combination of nanostructured semiconducting materials …

Coupled Photonic Crystal Micro-Cavities With Ultra-Low Threshold Power For Stiumulated Raman Scattering, Qiang Liu, Zhengbiao Ouyang, Sacharia Albin

Electrical & Computer Engineering Faculty Publications

We propose coupled cavities to realize a strong enhancement of the Raman scattering. Five sub cavities are embedded in the photonic crystals. Simulations through finite-difference time-domain (FDTD) method demonstrate that one cavity, which is used to propagate the pump beam at the optical-communication wavelength, has a Q factor as high as 1.254 × 10⁸ and modal volume as small as 0.03μm³ (0.3192(λ/n)³). These parameters result in ultra-small threshold lasing power ~17.7nW and 2.58nW for Stokes and anti-Stokes respectively. The cavities are designed to support the required Stokes and anti-Stokes modal spacing in silicon. The proposed structure …

Advanced Linear Identification Techniques For Signal Processing And Digital Video Broadcasting, Xiaoyu Feng

LSU Doctoral Dissertations

Linear identification technique is to linearly embed a piece of unique information into digital media data for the purpose of satisfying specific demands such as identification, annotation, and copyright, etc. We need to consider the quantity and the quality of identification data to be embedded as well as the corresponding interference to the original subject signal. However, there exist no generalized computationally-efficient optimization techniques for linear identification up to now. Therefore, in this dissertation work, we try to theoretically investigate the advanced linear identification techniques and combat the tradeoff problems between the quality of the embedded identification data and the …

Catalytic Process For The Conversion Of Synthesis Gas To Ethanol For Use As An Alternative Fuel, Nitin Kumar

LSU Doctoral Dissertations

Higher alcohols are increasing as a proportion of the transportation fuel market, and can be used as neat fuels, or as blends with conventional fuels. For a number of reasons, these C2+-alcohols will be of interest in the foreseeable future. Large-scale production of higher alcohols will likely be carried out via syngas, which can be produced from a number of feedstocks, including coal, natural gas and biomass. Rhodium-based catalysts have been found to be the most active/selective for higher alcohols. However, the literature shows that the yields of C2+-alcohols that can be achieved with current catalysts, even the most active/selective, …

Communication-Constrained Feedback Stability And Multi-Agent System Consensusability In Networked Control Systems, Laurentiu Dan Marinovici

LSU Doctoral Dissertations

With the advances in wireless communication, the topic of Networked Control Systems (NCSs) has become an interesting research subject. Moreover, the advantages they offer convinced companies to implement and use data networks for remote industrial control and process automation. Data networks prove to be very efficient for controlling distributed systems, which would otherwise require complex wiring connections on large or inaccessible areas. In addition, they are easier to maintain and more cost efficient. Unfortunately, stability and performance control is always going to be affected by network and communication issues, such as band-limited channels, quantization errors, sampling, delays, packet dropouts or …

Polymer Based Microfabrication And Its Applications In Optical Mems And Biomems, Guocheng Shao

LSU Doctoral Dissertations

Due to its ease of fabrication, low cost and great variety of functionalities, polymer has become an important material in microfabrication. MEMS devices with polymer as the structure material have found applications in various fields, especially in BioMEMS and optical MEMS. In this dissertation, three polymer based microfabricated devices/components have been developed and tested. Various polymer based fabrication techniques, such as high aspect ratio SU-8 photolithography, three dimensional polydimethylsiloxane (PDMS) soft lithography, multi-layer soft lithography and PDMS double casting technique have been developed/studied and employed in the device fabrication process. The main contribution of this dissertation includes: (1) Developed two …

Wave Forces On Bridge Decks And Damping Techniques To Reduce Damages, Aaron Michael Henry

LSU Master's Theses

The population of the Gulf Coast has grown immensely since 1960. Bridges along the coast are a vital part of this area’s infrastructure. They impact the transportation of goods and services, as well as the tourism in these areas. Many of these coastal bridges are at risk of being damaged or even destroyed during extreme weather events. This can cause not only short and long-term monetary problems, but the damage also can exacerbate the issues in getting people out of dangerous areas and getting help into areas in need, after an event. Damages during extreme weather events are the result …

Damage Detection And Identification In Fiber Reinforced Plastic Structural Members And Field Bridges Using Acoustic Emission Technique, Archana Nair

LSU Doctoral Dissertations

With the increased use of fiber reinforced polymer (FRP) based structural systems for rehabilitation of existing and construction of new bridges there is a requirement for identification of critical components of these structural systems and the determination of critical damage thresholds in them. Of the many available non-destructive techniques (NDT), acoustic emission (AE) monitoring had been identified as one of the most popular techniques applicable for damage discrimination in composites. The current study aimed at using patterns in AE data for the identification of damage modes exhibited by composite structural systems. The extensive experimental program involved testing of two structural …

Phase Noise In Cmos Phase-Locked Loop Circuits, Yang Liu

LSU Doctoral Dissertations

Phase-locked loops (PLLs) have been widely used in mixed-signal integrated circuits. With the continuously increasing demand of market for high speed, low noise devices, PLLs are playing a more important role in communications. In this dissertation, phase noise and jitter performances are investigated in different types of PLL designs. Hot carrier and negative bias temperature instability effects are analyzed from simulations and experiments. Phase noise of a CMOS phase-locked loop as a frequency synthesizer circuit is modeled from the superposition of noises from its building blocks: voltage-controlled oscillator, frequency divider, phase-frequency detector, loop filter and auxiliary input reference clock. A …

Evaluation Of Mechanical Proerties And Effective Thickness Of The Interfaces By Finite Element Analysis, Sesha Spandana Pulla

University of Kentucky Master's Theses

The nanoindentation technique has been used to identify the interfaces between dissimilar materials and subsequently to evaluate the physical and mechanical properties across the interfaces. The interfaces could represent the interface (transition face) between oxidized and unoxidized polymers, the interface between rigid fiber and polymer matrix, or other similar situations. It is proposed to use a nanoindenter equipped with small spherical tip to indent across the interfaces of dissimilar materials. The proposed method has been validated by conducting a large number of virtual experiments through 3-dimensional finite element simulations, by varying the properties of the two dissimilar materials, including various …

Particulate Organic Carbon Fate And Transport In A Lowland, Temperate Watershed, William Isaac Ford Iii

University of Kentucky Master's Theses

Small lowland agricultural systems promote conditions where benthic biological communities can thrive. These biogeochemical processes have significant impacts on terrestrial ecosystem processes including POC flux and fate, nutrient balances, water quality budges, and aquatic biological functioning. Limited information is available on coupled biological and hydrologic processes in fluvial systems. This study investigates the mixture of biological and hydrologic processes in the benthic layer in order to understand POC cycling in the South Elkhorn system. Further, comprehensive modeling of POC flux in lowland systems has not been performed previously and the behavior of potentially controlling variables, such as hydrologic forcing and …

The Stereospecific Hydrogenation And Dehydrogenation Of Rosin And Fatty Acids, Edward O'Brien

LSU Master's Theses

Tall oil is a byproduct of the standard wood pulping process in the paper industry. It is primarily made up of C:18 fatty acids, rosin acids and a minor fraction of neutrals. Normally, tall oil is further distilled into fractions and then hydrogenated or dehydrogenated into different products. In this project, three heterogeneous catalytic methods of producing byproducts of various distilled tall oil fractions were examined at lower temperatures and pressures than the industry norm in an attempt to develop cheaper production processes. Reactions were conducted in stirred batch reactors of different sizes and product compositions were analyzed primarily by …

Development And Implementation Of A Dual-Porosity Pore Network Structure Using X-Ray Computed Tomography For Pore Network Modeling Purposes, Samuel Taylor Best

LSU Master's Theses

3-D pore network modeling based on high-resolution X-ray computed tomography (XCT) is a useful tool for simulating pore-scale processes and phenomena within porous media in fields such as chemical and petroleum engineering and groundwater hydrology. XCT images provide the opportunity to capture the true topology of the porous system, retaining important characteristics such as pore geometry, location, and connectivity. However, a major limitation of XCT is its inability to resolve features smaller than the image resolution such as intraparticle porosity and void-space within secondary phases such as clay and micrite, here called microporosity. Identifying this microporosity is important for modeling …

Modeling The Response Of A Beach Restoration Project In Louisiana To Two Consecutive Hurricanes, Naveen Khammampati

LSU Master's Theses

The current study is concentrated in modeling the cross-shore beach profile evolution and severe erosion of the dune (overwash) of a restored barrier island due to Hurricanes Gustav (2008) and Ike (2008) in coastal Louisiana. Pre-storm and post-storm survey data sets of Chaland Headland located in Plaquemines Parish, LA, were analyzed and categorized based on the overwash processes, and numerically modeled using SBEACH (Storm-induced BEAch CHange). The model results were compared with the measured topographic data. A total of 10 survey profiles were used in this study. SBEACH simulates cross-shore beach, berm and dune erosion produced by storm waves and …

Statistical Analysis When The Data Is An Image: Eliciting Student Thinking About Sampling And Variability, Tamara J. Moore, Margret Hjalmarson, Robert Delmas

School of Engineering Education Faculty Publications

Within statistics education, there is a growing interest in understanding students' application of understanding about variability and sampling given the relative lack of research in either area (Shaughnessy, 2007). The task examined in this paper elicited students' knowledge of these concepts within a small-group problem solving task completed by teams of first-year engineering students. In the Nanoroughness task, teams of students designed a procedure for quantifying the roughness of a material surface using digital images generated by atomic force microscopy. The procedure required students to apply statistical methods in order to aggregate the data. The focus of this article is …

High Conductivity Solid Oxide Electrolyte Composite-Laminates Utilizing Scandia/Ceria Co-Doped Zirconia Core With Yttria Stabilized Zirconia Outer Skins, Jay Neutzler, Xinyu Huang, Joshua Sightler, Yan Chen, Nina Orlovskaya

Faculty Publications

Increasing the conductivity of electrolytes in lower temperature Solid Oxide Fuel Cells (SOFC) is of great importance. However, there are several challenges that are to be addressed, which include phase stability of electrolyte’s crystal structure, chemical stability in both oxidizing and reducing environments, and maintaining mechanical integrity and high ionic conductivity over time.

Mechanical Characterization Of Polymer Electrolyte Membrane With Optical Methods, Xinyu Huang, Luis Alva, Jay Neutzler

Faculty Publications

Mechanical properties of polymer electrolyte membrane have important implications in the endurance of many electrochemical energy conversion devices [1]. Mechanical experiments are effective method to reveal discrete damage developed in the membrane by quantifying the change of mechanical strength and toughness. Regular strain measurement methods are overly intrusive to the thin and relatively fragile polymer electrolyte membrane; hence optical-based minimal invasive stress/strain measurement methods are studied.

Stability Analysis Of Anchored Rock Slopes Against Plane Failure Subjected To Surcharge And Seismic Loads, Md M. Hossain

Theses: Doctorates and Masters

The stability analysis of rock slopes has been a challenging task for engineers

because the rock mass constituting the slope often has discontinuities in various

forms, resulting in different types of slope failures. The plane failure is one of the

rock slope failures observed in field situations when the discontinuity is in the form

of joint planes. There are several parameters including surcharge and seismic loads

that govern the stability of the rock slope against plane failure in field projects. The

limit equilibrium approach for the estimation of the factor of safety of the rock slope

against plane failure has …

Predictive And Adaptive Game Development A Practical Application Of Development Models To The Independent Video Game Industry, Liam A. Hunt

Theses : Honours

Through the process of researching a number of game and system development models, this study defines two archetypical development models - the predictive and the adaptive. Using each of these models, two video games have been developed in order to measure the practical effect that they can have on the design, development process and player experience of a game. Using the knowledge gained through playtesting and an analysis of the relationship between each game and its development methodology, a number of development guidelines and recommendations have been specifically constructed for use by independent games developers. The practical development and written …

Vibration Diagnosis Of Elastic Shafts With A Transverse Crack, Cai Zhongyi

Theses: Doctorates and Masters

Detection of the shaft crack in a rotating machine is one of the most challenging problems in equipment predictive maintenance. In the available literature, various crack detection methods have been applied to study the dynamic behaviour of a cracked shaft. This study sought to attempt a vibration-based method. Elastic shafts with three different types of transverse cracks, including experimentally-induced fatigue crack, welded shaft crack, and wire-cut crack, were fabricated, and used to analyse the bending stiffness and frequency response in the vertical direction. The results from the cracked shafts were compared with that of an intact shaft. Bending stiffness of …