Engineering Commons^™

The Integrated Wrf/Urban Modeling System: Development, Evaluation, And Applications To Urban Environmental Problems, Fei Chen, Hiroyuki Kusaka, Robert Bornstein, Jason Ching, C.S.B. Grimmond, Susanne Grossman-Clarke, Thomas Loridan, Kevin W. Manning, Alberto Martilli, Shiguang Miao, David J. Sailor, Francisco P. Salamanca, Haider Taha, Mukul Tewari, Xuemei Wang, Andrzej A. Wyszogrodzki, Chaolin Zhang

Mechanical and Materials Engineering Faculty Publications and Presentations

To bridge the gaps between traditional mesoscale modeling and microscale modeling, the National Center for Atmospheric Research (NCAR), in collaboration with other agencies and research groups, has developed an integrated urban modeling system coupled to the Weather Research and Forecasting (WRF) model as a community tool to address urban environmental issues. The core of this WRF/urban modeling system consists of: 1) three methods with different degrees of freedom to parameterize urban surface processes, ranging from a simple bulk parameterization to a sophisticated multi-layer urban canopy model with an indoor outdoor exchange sub-model that directly interacts with the atmospheric boundary layer, …

Test 1999a: John Deere 8335rt My12, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Multilayer Network Resilience Analysis And Experimentation On Geni, Justin P. Rohrer, Egemen K. Çetinkaya, James P. G. Sterbenz

Electrical and Computer Engineering Faculty Research & Creative Works

GENI is evolving to provide a promising environment in which to do experimental research in the resilience and survivability of future networks, by allowing programmable control over topology and mechanism, while providing the scale and global reach needed to conduct network experiments far beyond the capabilities of a conventional testbed. We will use GENI in general, and the GpENI infrastructure (expanding to 40 clusters with 200 nodes worldwide), federated with the larger GENI PlanetLab control framework and interconnected to several ProtoGENI facilities to perform resilience and survivability experiments at scale, both in terms of node count and with the geographic …

Robust Statistical Methods For Non-Normal Quality Assurance Data Analysis In Transportation Projects, Mohammad Moin Uddin

University of Kentucky Doctoral Dissertations

The American Association of Highway and Transportation Officials (AASHTO) and Federal Highway Administration (FHWA) require the use of the statistically based quality assurance (QA) specifications for construction materials. As a result, many of the state highway agencies (SHAs) have implemented the use of a QA specification for highway construction. For these statistically based QA specifications, quality characteristics of most construction materials are assumed normally distributed, however, the normality assumption can be violated in several forms. Distribution of data can be skewed, kurtosis induced, or bimodal. If the process shows evidence of a significant departure from normality, then the quality measures …

High Performance Piezoelectric Materials And Devices For Multilayer Low Temperature Co-Fired Ceramic Based Microfluidic Systems, Wenli Zhang

University of Kentucky Doctoral Dissertations

The incorporation of active piezoelectric elements and fluidic components into micro-electromechanical systems (MEMS) is of great interest for the development of sensors, actuators, and integrated systems used in microfluidics. Low temperature cofired ceramics (LTCC), widely used as electronic packaging materials, offer the possibility of manufacturing highly integrated microfluidic systems with complex 3-D features and various co-firable functional materials in a multilayer module. It would be desirable to integrate high performance lead zirconate titanate (PZT) based ceramics into LTCC-based MEMS using modern thick film and 3-D packaging technologies. The challenges for fabricating functional LTCC/PZT devices are: 1) formulating piezoelectric compositions which …

Mechanical Characterizations Of Environmentally Conditioned Shape Memory Polymers For Reconfigurable Aerospace Structures, Jared T. Fulcher

University of Kentucky Master's Theses

Shape memory polymers (SMPs) have been candidate materials for morphing applications. However, the SMPs have not been fully tested to work in relevant environments required for Air Force missions. In this study, an epoxy-based SMP was separately exposed to moisture, lubricating oil and UV radiation, which are simulated service environments designed to be reflective of anticipated performance requirements. The thermomechanical properties and shape memory effects were studied by using novel high-temperature nanoindentation technique. Results show that environmental conditions have affected the glass transition temperature and mechanical properties of the SMPs. In most cases, the conditioned SMPs exhibited higher elastic moduli …

Column: File Cabinet Forensics, Simson Garfinkel

Journal of Digital Forensics, Security and Law

Researchers can spend their time reverse engineering, performing reverse analysis, or making substantive contributions to digital forensics science. Although work in all of these areas is important, it is the scientific breakthroughs that are the most critical for addressing the challenges that we face. Reverse Engineering is the traditional bread-and-butter of digital forensics research. Companies like Microsoft and Apple deliver computational artifacts (operating systems, applications and phones) to the commercial market. These artifacts are bought and used by billions. Some have evil intent, and (if society is lucky), the computers end up in the hands of law enforcement. Unfortunately the …

Column: Putting The Science In Digital Forensics, Fred Cohen

Journal of Digital Forensics, Security and Law

In a recent study, digital forensics was found to lack a consensus around even the most basis notions and terminology of the field. To quote: “These two preliminary studies individually suggest that (1) scientific consensus in the area of digital forensic evidence examination is lacking in the broad sense, but that different groups within that overall community may have limited consensus around areas in which they have special expertise, and (2) that the current peerreviewed publication process is not acting to bring about the sorts of elements typically found in the advancement of a science toward such a consensus. ... …

Technology Corner: Internet Packet Sniffers, Nick V. Flor, Kenneth Guillory

Journal of Digital Forensics, Security and Law

The best way to understand an internet packet sniffer, hereafter “packet sniffer”, is by analogy with a wiretap. A wiretap is a piece of hardware that allows a person to eavesdrop on phone conversations over a telephone network. Similarly, a packet sniffer is a piece of software that allows a person to eavesdrop on computer communications over the internet. A packet sniffer can be used as a diagnostic tool by network administrators or as a spying tool by hackers who can use it to steal passwords and other private information from computer users. Whether you are a network administrator or …

Sampling: Making Electronic Discovery More Cost Effective, Milton Luoma, Vicki Luoma

Journal of Digital Forensics, Security and Law

With the huge volumes of electronic data subject to discovery in virtually every instance of litigation, time and costs of conducting discovery have become exceedingly important when litigants plan their discovery strategies. Rather than incurring the costs of having lawyers review every document produced in response to a discovery request in search of relevant evidence, a cost effective strategy for document review planning is to use statistical sampling of the database of documents to determine the likelihood of finding relevant evidence by reviewing additional documents. This paper reviews and discusses how sampling can be used to make document review more …

Column: The Physics Of Digital Information, Fred Cohen

Journal of Digital Forensics, Security and Law

No abstract provided.

Developing A Forensic Continuous Audit Model, Grover S. Kearns, Katherine J. Barker, Stephen P. Danese

Journal of Digital Forensics, Security and Law

Despite increased attention to internal controls and risk assessment, traditional audit approaches do not seem to be highly effective in uncovering the majority of frauds. Less than 20 percent of all occupational frauds are uncovered by auditors. Forensic accounting has recognized the need for automated approaches to fraud analysis yet research has not examined the benefits of forensic continuous auditing as a method to detect and deter corporate fraud. The purpose of this paper is to show how such an approach is possible. A model is presented that supports the acceptance of forensic continuous auditing by auditors and management as …

Analysis Of Data Remaining On Second Hand Adsl Routers, Patryk Szewczyk

Journal of Digital Forensics, Security and Law

In theory, an ADSL router can provide an additional layer of security to a wired and wireless network through; access control, wireless encryption, firewall rule sets, and network event logging. An ADSL router may also contain the users’ usage habits and broadband account credentials. However, end-users may be unaware of the intricacies of the security measures available and the potentially confidential information stored on their device. As a result a second hand ADSL router may contain a wealth of user-specific information if not wiped and disposed of in a secure manner. This paper shows the data that was acquired from …

Book Review: Online Privacy: Issues In The Digital Age, Darlene M. Tester

Journal of Digital Forensics, Security and Law

This book is one of a series of books Currie has written about online areas of concern. This is the sixth book in the series. The purpose of the book is to act as a primer for people in the IT field who may need a point of reference for Internet issues such as gaming, security and privacy. The book takes a high level look at the complexities of privacy online from social networking to hackers and provides insight into what the most pressing issues of privacy are online today.

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Technology Corner: Virtual Crime Scene Reconstruction: The Basics Of 3d Modeling, Nick V. Flor

Journal of Digital Forensics, Security and Law

Digital crime scenes take place in the context of physical crime scenes. Virtual crime scene reconstruction is an activity where investigators create a 3- dimensional (3-D) model of an actual crime scene for the purpose of determining the events that lead to the crime. While virtual crime scene reconstruction is currently used for analyzing physical scenes, it can also help investigators visualize and explore ways digital media could have been used to perpetrate a crime. In this technology corner we explore one of the technologies underlying virtual crime scene reconstruction: 3-D modeling.

Working Inside The Box: An Example Of Google Desktop Search In A Forensic Examination, Timothy J. Latulippe

Journal of Digital Forensics, Security and Law

Information and the technological advancements for which mankind develops with regards to its storage has increased tremendously over the past few decades. As the total amount of data stored rapidly increases in conjunction with the amount of widely available computer-driven devices being used, solutions are being developed to better harness this data. These types of advancements are continually assisting investigators and computer forensic examiners. One such application which houses copious amounts of fruitful data is the Google Desktop Search program. Coupled with tested and verified techniques, examiners can exploit the power of this application to cater to their investigative needs. …

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Book Review: Iphone And Ios Forensics: Investigation, Analysis And Mobile Security For Apple Iphone, Ipad And Ios Devices, Christopher Schulte

Journal of Digital Forensics, Security and Law

These are exciting times for Digital Forensics practitioners. While our examinations of mobile devices (including cell phones and tablet computers) continue to bring new and sometimes hair-pulling challenges into our labs and on-site engagements, research and understanding of these tiny computers is increasing at what seems an exponential rate. This is especially true in the iOS (Apple Computer’s mobile operating system that powers the iPhone, iPad, iPod Touch and Apple TV) space. The diligent work of talented computer scientists in this field allows examiners everywhere to reap the benefits of easier, faster and more effective examinations that yield more accurate …

Performance Analysis Of Batch Reactor Temperature Control Systems, Michael Healy, John Mcgrory

Dissertations

The aim of this project was to investigate the performance of a number of key control strategies in the temperature control of batch reactors. A bench scale model was built and a batch production system was then implemented on this model. As there was no a priori knowledge of the system a number of common system identification methods were investigated.  The system was controlled using a Mitsubishi FX(2)N Programmable Logic Controller which was interfaced with a PC running ICONICS, a Supervisory Control And Data Acquisition software package. The system identification methods produced two different models for the system and …

The Application Of Fuzzy Logic In Determining Linguistic Rules And Associative Membership Functions For The Control Of A Manufacturing Process, Marcus Foley, John Mcgrory

Dissertations

Fuzzy logic is a form of multi-valued logic derived from fuzzy set theory. Its methodology aims to provide a definitive solution from information that may be construed as ambiguous, imprecise or noisy. Classical set theory studies the properties of sets, while fuzzy set theory investigates the degree to which an element can be related to a set. The aim of this project is to develop a control strategy for a specific technical challenge relating to the food processing sector based on the deployment of fuzzy logic control concepts. Specifically, in this paper the author is concerned with the ability to …

Simulation Of Reverse Flow Heat Recovery For Pharmaceutical Clean Rooms In Colombia, Sandra Juliana Olaya Pineda, John Mcgrory

Dissertations

This dissertation examines, analyses, implements, and evaluates an innovative software heat transfer model for predicting air-to-air heat (energy) recovered in pharmaceutical drying clean rooms in Colombia. The approach provides a synergy between Reverse Flow Heat Recovery technology and activities for the consumption of this energy, not solely within the process, but throughout the whole pharmaceutical complex (e.g. warehouse, office and alternative processes). This novel integrated modelling tool developed using off the shelf software application such as MS Excel combined with MS Visual programming to calculate psychometric points, mass and enthalpy balances for analysing the operation of heat recovery systems. This …

Investigating Modern Communication Technologies: The Effect Of Internet-Based Communication Technologies On The Investigation Process, Matthew Simon, Jill Slay

Journal of Digital Forensics, Security and Law

Communication technologies are commonplace in modern society. For many years there were only a handful of communication technologies provided by large companies, namely the Public Switched Telephone Network (PSTN) and mobile telephony; these can be referred to as traditional communication technologies. Over the lifetime of traditional communication technologies has been little technological evolution and as such, law enforcement developed sound methods for investigating targets using them. With the advent of communication technologies that use the Internet – Internet-based or contemporary communication technologies – law enforcement are faced with many challenges. This paper discusses these challenges and their potential impact. It …

On Some Recent Applications Of The Coanda Effect, Caroline P. Lubert

Department of Mathematics and Statistics - Faculty Scholarship

Over the last quarter century or so, the Coanda principle has become increasingly used in a wide variety of applications, including industrial, medical, maritime technology, and aerodynamics. In addition, its effect has been increasingly observed in the natural world. Devices employing this principle usually offer substantial flow deflection, and enhanced turbulence levels and entrainment compared with conventional jet flows. However, these prospective advantages are generally accompanied by other significant disadvantages such as jet flow detachment, and a considerable increase in associated noise levels. Much of the time, the reasons for this are not well understood. Consequently, in many cases, the …

Shock-Associated Noise Generation In Curved Coanda Turbulent Wall Jets, Caroline P. Lubert, Richard J. Shafer

Department of Mathematics and Statistics - Faculty Scholarship

Curved three-dimensional turbulent Coanda wall jets are present in a multitude of natural and engineering applications. The mechanism by which they form a shock-cell structure is poorly understood, as is the accompanying shock-associated noise (SAN) generation. This paper discusses these phenomena from both a modeling and experimental perspective. The Method of Characteristics is used to rewrite the governing hyperbolic partial differential equations as ordinary differential equations, which are then solved numerically using the Euler predictor-corrector method. The effects of complicating factors -- such as radial expansion and streamline curvature -- on the prediction of shock-cell location are then discussed. This …

Artificial Neural Network Based Fault Location For Transmission Lines, Suhaas Bhargava Ayyagari

University of Kentucky Master's Theses

This thesis focuses on detecting, classifying and locating faults on electric power transmission lines. Fault detection, fault classification and fault location have been achieved by using artificial neural networks. Feedforward networks have been employed along with backpropagation algorithm for each of the three phases in the Fault location process. Analysis on neural networks with varying number of hidden layers and neurons per hidden layer has been provided to validate the choice of the neural networks in each step. Simulation results have been provided to demonstrate that artificial neural network based methods are efficient in locating faults on transmission lines and …

Sensing Characteristics Of Multiwalled Carbon Nanotube (Mwcnt) Sensors Embedded In Porous Alumina Membranes, Swetha Sree Nimmagadda

Theses and Dissertations--Electrical and Computer Engineering

A theoretical model is developed for calculating the sensitivity of resistive sensors based on aligned multiwall carbon nanotubes (MWCNT) embedded in the pores of alumina membranes. Aligned MWCNTs offer more surface area as each CNT acts as a landing site for detecting gas species. The MWCNTs behave as a p-type semiconducting layer; when the bus bar contacts are placed at either end of the top surface the resistance between the contacts responds to oxidizing (resistance decreases) and reducing gases (resistance increases). The model presented in this thesis aims to understand the device resistance dependence upon the MWCNT resistance, and the …

Control Of Metal Transfer At Given Arc Variables, Yi Huang

Theses and Dissertations--Electrical and Computer Engineering

Gas Metal Arc Welding (GMAW) is one of the most important welding processes in industrial application. To control metal transfer at given variables is a focus in the field of research and development in welding community.

In this dissertation, laser enhanced GMAW is proposed and developed by adding a lower power laser onto the droplet to generate an auxiliary detaching force. The electromagnetic force needed to detach droplets, thus the current that determines this force, is reduced. Wire feed speed, arc voltage, and laser intensity were identified as three major parameters that affect the laser enhanced metal transfer process and …

Camera Planning And Fusion In A Heterogeneous Camera Network, Jian Zhao

Theses and Dissertations--Electrical and Computer Engineering

Wide-area camera networks are becoming more and more common. They have widerange of commercial and military applications from video surveillance to smart home and from traffic monitoring to anti-terrorism. The design of such a camera network is a challenging problem due to the complexity of the environment, self and mutual occlusion of moving objects, diverse sensor properties and a myriad of performance metrics for different applications. In this dissertation, we consider two such challenges: camera planing and camera fusion. Camera planning is to determine the optimal number and placement of cameras for a target cost function. Camera fusion describes the …

Control Characteristics Of An All-Digital Proportional-Integral-Derivative (Pid) Compensator, David Michael Feinauer

Theses and Dissertations--Electrical and Computer Engineering

The digitization of classical control systems presents a number of challenges and opportunities with respect to the miniaturization, distribution, reliability verification and obsolescence of both the controller and the underlying system under control. A method for the design of proportional-integral-derivative (PID) compensators realized in the form of all-digital components is presented. All-digital refers to a system implementation that is realizable with a wide range of digital logic components including discrete digital logic elements and programmable logic devices (PLDs) such as field-programmable gate arrays. The proportional, integral and derivative components of the classical PID control law were re-envisioned in terms of …