Engineering Commons^™

Investigating The Safety Cognition Of Taiwan's Construction Personnel, Wei Tong Chen, Chun Sheng Lu, Ying-Hua Huang

Journal of Marine Science and Technology–Taiwan

A high construction accident rate is related to failures in the implementation of safety management. The rate of occupational injuries of Taiwan construction industry is higher than the ones of the developed counties. Knowledge and reinforcement of safety cognition for construction personnel are critical to improve safety performance in construction. In this study, a safety cognition evaluation scale is developed to measure the safety cognition of construction personnel in Taiwan. The safety cognition of construction personnel was ranked in descending order of safety engineers, contractor-related personnel, and design/audit personnel. The aspect of accident statistics has the smallest cognition differences while …

Boundary Element Analysis Of Thin Structural Problems In 2d Elastostatics, Yao-Ming Zhang, Yan Gu, Jeng-Tzong Chen

Journal of Marine Science and Technology–Taiwan

Thin structures, such as thin films and coatings, have been widely designed and utilized in many industries recently. However, the widespread experimental research in thin structural problems underlies a general lack of modeling efforts which can accurately and efficiently predict their performance. In this paper, the boundary element method (BEM) based on elasticity theory is developed for two-dimensional (2D) thin structures with the thickness to length ratio in the micro (10-6) or nano (10-9) scales. The BEM-based approach proposed in this paper is constructed using a combination of the regularized indirect boundary integral equations (BIEs) and a general nonlinear transformation …

Improvement Of Biophysical Micromixer Design, Chin-Tsan Wang, Tzu-Yang Hu

Journal of Marine Science and Technology–Taiwan

In a passive micro-scale mixer, the complete mixing of two or more fluids within a reasonable time period plays an important role. Microfluidic transportation and effective mixing are of importance and require examination. The biophysical micromixer addressed by authors would be utilized because of its excellent ability to enlarge the interface and reduce the diffusion length during the mixing process. Here, the mixing efficiency, pressure drop and Aspect ratio (AR) at an optimal inlet Reynolds ratio will be studied. Some useful results will be addressed: First, the dimensions of AX, GX, GY, FX, HX, HY and J would be effective …

A Truly-Meshless Galerkin Method, Through The Mlpg "Mixed" Approach, Zhidong Han, Satya N. Atluri

Journal of Marine Science and Technology–Taiwan

A truly meshless Galerkin method is formulated in the present study, as a special case of the general Meshless Local Petrov-Galerkin (MLPG) “Mixed” approach. The Galerkin method is implemented as a truly meshless method, for solving elasto-static problems. In the present Galerkin method, the test function is chosen to be the same as the trial function, as a special case of the MLPG approach. However, the MLPG local weak form is written over a local sub-domain which is completely independent from the trial or test functions. Even though in the present Galerkin approach, the trial and test functions are the …

Characterization Of Key Process Parameters In Injection Blow Molding For Improving Quality, Aspen D'Costa

Online Journal for Workforce Education and Development

The purpose of this study was to discover the performance of significant process parameters in manufacturing 20 oz. plastic beverage bottles. An experimental methodology was carefully designed to examine the characteristics of key variables such as ambient and operating temperatures, process line operators, resin types, resin colors and operating lines associated with a plastic bottle manufacturing line. More explicitly, this study seeks to identify the definitive relationship between the selected process parameters for the production machine (Sidel™) and the ensuing product quality. Also, this study was conducted to evaluate the performance characteristics of Post Consumer Resin (PCR), virgin resin and …

Transcriptome Sequencing Of The Blind Subterranean Mole Rat, Spalax Galili: Utility And Potential For The Discovery Of Novel Evolutionary Patterns, Assaf Malik, Abraham Korol, Sariel Hubner, Aaron Avivi, Alvaro Hernandez, Jyothi Thimmapuram, Shahjahan Ali, Mark Bond, Fabian Glaser, Arnon Paz

Cyber Center Publications

The blind subterranean mole rat (Spalax ehrenbergi superspecies) is a model animal for survival under extreme environments due to its ability to live in underground habitats under severe hypoxic stress and darkness. Here we report the transcriptome sequencing of Spalax galili, a chromosomal type of S. ehrenbergi. cDNA pools from muscle and brain tissues isolated from animals exposed to hypoxic and normoxic conditions were sequenced using Sanger, GS FLX, and GS FLX Titanium technologies. Assembly of the sequences yielded over 51,000 isotigs with homology to ~12,000 mouse, rat or human genes. Based on these results, it was …

Simulation, Measurement And Image Analysis Of Corrosion Initiation And Growth Rate For Aluminum 2024 And Steel 304, Yan Fang

Theses and Dissertations

Abstract SIMULATION, MEASUREMENT AND IMAGE ANALYSIS OF CORROSION INITIATION AND GROWTH RATE OF ALUMIUM 2024 AND STEEL 304 By Yan Fang, MS A thesis submitted in partial fulfillment of the requirements for the degree of M.S. of Mechanical and Nuclear Engineering at Virginia Commonwealth University. Virginia Commonwealth University, 2011 Major Director: Dr. Brian Hinderliter, Ph. D Associate professor, Mechanical and Nuclear Engineering Time: 11 a.m. Place: Room E3210 Engineering East Hall Date: Friday August 12, 2011 Corrosion initiation and growth rate are important properties in maintaining structural integrity, especially for surface and pit corrosion of common infrastructure and transportation metals. …

Electrospun Polymer-Fiber Solar Cell, Shinobu Nagata

Theses and Dissertations

A study of fabricating the first electrospun polymer-fiber solar cell with MEHPPV is presented. Motivation for the work and a brief history of solar cell is given. Limiting factors to improvement of polymer solar cell efficiency are illustrated. Electrospinning is introduced as a technique that may increase polymer solar cell efficiency, and a list of advantages in the technique applied to solar cell is discussed. Results of electrospun polymer-fiber solar cell, absorption, and its device parameter diagnosis through an equivalent circuit analysis are presented.

Expanding Lamina Emergent Mechanism (Lem) Capabilities: Spherical Lems, Lem Joints, And Lem Applications, Samuel E. Wilding

Theses and Dissertations

Lamina Emergent Mechanisms (LEMs) are a class of compliant mechanisms that can be manufactured from sheet goods and possess motion out of the plane of fabrication. LEMs can be designed to perform sophisticated motions. This thesis expands LEM understanding and increases the ability to utilize them in applications by introducing the fundamentals of spherical LEMs, creating joints suitable for LEMs, and providing an example of a LEM application. In this thesis, the fundamentals of spherical LEMs are developed. This includes classification of all possible spherical 4R LEMs and a discussion of the motion characteristics of the various mechanisms. The motion …

Comparison Of Analysis And Optimization Methods For Core-Megacolumn-Outrigger Skyscrapers, James B. Peterson

Theses and Dissertations

The goal of this research is to compare performance of three analysis methods and three optimization methods for core-megacolumn-outrigger, or CMO skyscrapers. The three analysis methods include a 1D stick analysis, 2D frame analysis, and 3D finite element analysis. The three optimization methods include a trial and error optimization, optimality criteria optimization, and genetic algorithm. Each of these methods was compared by applying an example CMO skyscraper. The 1D stick analysis proved to be the most accurate when compared with the 3D finite element results. The genetic algorithm was recommended as the best optimization method in this research. The 1D …

Analytical Comparison Of Multimicrophone Probes In Measuring Acoustic Intensity, Curtis P. Wiederhold

Theses and Dissertations

In the late 1970s, a method was developed to estimate acoustic intensity in one dimension by taking the cross-spectral density of two closely-spaced microphone signals. Since then, multimicrophone probes have been developed to measure three-dimensional intensity as well as energy density. Their usefulness has led to the design of various types of multimicrophone probes, the most common being the four-microphone orthogonal, the four-microphone regular tetrahedron, and the six-microphone designs. These designs generally either consist of microphones suspended in space near each other or mounted on the surface of a sphere. This work analytically compares the relative merits of each probe …

Relaxation Of Optically Excited Carriers In Graphene, Raseong Kim, Vasili Perebeinos, Phaedon Avouris

Birck and NCN Publications

We explore the relaxation of photoexcited graphene by solving a transient Boltzmann transport equation with electron-phonon (e-ph) and electron-electron (e-e) scattering. Simulations show that when the excited carriers are relaxed by e-ph scattering only, a population inversion can be achieved at energies determined by the photon energy. However, e-e scattering quickly thermalizes the carrier energy distributions washing out the negative optical conductivity peaks. The relaxation rates and carrier multiplication effects are presented as a function of photon energy, graphene doping, and dielectric constant.

A Strategy For Fabricating Complex Structures Via A Hybrid Manufacturing Process, Tarak A. Amine, Todd E. Sparks, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The purpose of this paper is to introduce a strategy for fabricating complex structures via a hybrid manufacturing process. The Laser Aided Manufacturing Process (LAMP) lab at Missouri S&T has developed a hybrid process combining both a direct metal deposition process and a five-axis CNC milling. Accessibility is a difficulty when finish machining internal features. The concept is to pause the deposition process to finish machine an internal feature while it is still visible is one possible solution to this issue. However, this must be done in a manner that will not be spoiled when the deposition process continues. This …

Effect Of Particle Size, Binder Content And Heat Treatment On Mechanical Properties Of 13-93 Bioactive Glass Scaffolds, Krishna C. R. Kolan, Ming-Chuan Leu, Greg Hilmas, Mariano Garcia Velez

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Particle size, binder content and the post-processing schedule are important parameters that affect the microstructure, and, hence, the mechanical properties of parts produced using the indirect selective laser sintering process. 13-93 bioactive glass, with mean particle sizes ranging from 10 μm to 44 μm, is mixed with different amounts of stearic acid binder to fabricate green scaffolds. Through the design of the post-processing schedule, the time required for postprocessing the green scaffolds is reduced from the initial 80 hrs to 12 hrs. The compressive strength varies from 41 MPa for a part with~60% porosity to 157 MPa for a part …

Bio-Inspired Design Of Bipolar Plate Flow Fields For Polymer Electrolyte Membrane Fuel Cells, Nannan Guo, Ming-Chuan Leu, Maoliang Wu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The flow field of a bipolar plate distributes hydrogen and oxygen for polymer electrolyte membrane (PEM) fuel cells and removes the produced water from the fuel cells. It greatly influences the performance of fuel cells, especially regarding reduction of mass transport loss. Flow fields with good gas distribution and water removal capabilities reduce the mass transport loss, thus allowing higher power density. Inspired by natural structures such as veins in tree leaves and blood vessels in lungs, which efficiently feed nutrition from one central source to large areas and are capable of removing undesirable by-products, a mathematic model has been …

Octree Approach For Simulation Of Additive Manufacturing Toolpath, Ch. Sweta Dhaveji, Todd E. Sparks, Jianzhong Ruan, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Machine simulation is an effective way of checking additive manufacturing tool paths for both interferences and errors in part produced. This paper presents an algorithm to visually simulate a multi axis additive manufacturing system as it executes a process plan. Simulation results are intended to be used as a verification step before physically producing the part. Verification is particularly important for large builds of expensive materials. The algorithm uses an octree approach to efficiently model the deposition of part geometry and its changes. This paper discusses development of the simulation algorithm, including both the representation of the additive manufacturing machine …

Process Planning And Control For Functionally Graded Material Fabrication Using Freeze-Form Extrusion Fabrication, Brad Deuser, Lie Tang, Jeff Geldmeier, Robert G. Landers, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Using multiple materials in additive manufacturing technologies is critical for building parts with functionally gradient geometries. In order to achieve a desired material gradient, an advanced process planning and control system is required. This paper details the development of a process planning method and control system for functionally graded material fabrication using a triple extruder Freeze-form Extrusion Fabrication (FEF) system including motion code generation, extruder dynamic modeling and control, and composition gradient control. The effect that extruding multiple materials from a single orifice via static mixing has on the time delay of the resulting mixture is taken into account for …

Freeze-Form Extrusion Fabrication Of Composite Structures, Ming-Chuan Leu, Lie Tang, Bradley K. Deuser, Robert G. Landers, Greg Hilmas, Shi C. Zhang, Jeremy Lee Watts

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A Freeze-form Extrusion Fabrication (FEF) process capable of making three-dimensional (3D) parts and structures with graded composite materials is presented in this paper. The process development includes the design and manufacture of a gantry machine with a triple-extruder mechanism and the associated electronics hardware and computer software for fabricating functionally graded parts from multiple aqueous pastes. A rheological behavior study with Al₂O₃ paste is performed to identify an efficient binder for transforming the paste into a pseudoplastic with a high yield stress. A green part is first fabricated using the triple-extruder FEF machine in a layer-by-layer manner …

Influence Of Subglottic Geometry On Computational And Synthetic Vocal Fold Model Vibration, Simeon L. Smith

Theses and Dissertations

The voice plays a vital role in human communication. The purpose of voice research is to advance the understanding of voice production physics, with the ultimate goal of leading to improved voice care. In this research computational and synthetic vocal fold models were used to explore the role of subglottal geometry in vocal fold vibration. Three specific studies were performed. First, the effect of the inferior vocal fold surface angle on voice production was investigated using a two-dimensional self-oscillating finite element vocal fold model. Varying the inferior angle resulted in significant changes to model vibratory motion, glottal width, flow rate, …

Numerical Simulation Of Ram Extrusion Process For Ceramic Materials, Mingyang Li, Lie Tang, Fei Xue, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The freeze–form extrusion process for aqueous-based ceramic paste is complex due to the non-Newtonian behavior of the paste. In this paper the process is studied numerically using a developed mathematical model. The ceramic paste viscosity is characterized by the Herschel-Bulkley model. The relationship between plunger velocity and extrusion force is computed numerically. The influence of air, which is mixed with the paste during the loading process, is also examined. Due to the compressibility introduced by the trapped air, the plunger force dynamic response is typically dominated by a first order response. It is also shown that the extrusion plunger force …

Smb-Interp: An N-Th Order Accurate, Distributed Interpolation Library, Stephen Mardson Mcquay

Theses and Dissertations

The research contained herein yielded an open source interpolation library implemented in and designed for use with the Python programming language. This library, named smbinterp, provides an interpolation to an arbitrary degree of accuracy. The library is parametric in that is can take input from the user to adjust the underlying interpolation mechanism. The characteristics and behavior of the library according to the adjustment of these parameters is presented herein, as well as the results of a mesh resolution study depicting the accuracy obtained by the library. The smbinterp library was designed with parallel computing environments in mind. The library …

Flow-Induced Responses Of Normal, Bowed, And Augmented Synthetic Vocal Fold Models, Preston Roylance Murray

Theses and Dissertations

The voice is the primary mode of communication for humans. Because the voice is so important, voice disorders tend to severely diminish quality of life. A better understanding of the physics of voice production can help to improve treatment of voice disorders. For this thesis research a self-oscillating synthetic vocal fold model was developed, compared with previous synthetic vocal fold models, and used to explore the physical effects of augmentation injections on vibration dynamics. The research was conducted in two stages. First, four vocal fold models were evaluated by quantifying onset pressure, frequency, maximum glottal gap, flow rate, and medial …

High Pressure Structural Studies On Nb5si3 Up To 26.2 Gpa, Brandon Stewart, Ravhi S. Kumar

Undergraduate Research Opportunities Program (UROP)

With the use of synchrotron techniques, we can better understand how crystalline structures behave under extreme conditions. This yields the opportunity to resolve complex crystal structures [1]. Here, we focus on the high pressure crystal structure of Nb5Si3. Refractory metal silicides are an important class of materials as they are used in high temperature applications such as turbines and aerospace modules. As an example, the performance of a jet engine is highly influenced by the maximum internal pressure and temperature possible. Obtaining higher levels of thrust is dependent upon the material's ability to remain structurally sound under extreme temperatures and …

Correlation Between Grain Dislocation Density And Orientation For Naturally Deformed Mantle Xenolith From Jagersfontein Mine, Quinton Guerrero, Quinlan Smith

Undergraduate Research Opportunities Program (UROP)

Determining the reaction of poly-crystalline structures to induced stress is an extremely difficult problem in contemporary engineering and geology. The main challenge lies in the inhomogeneity of the grains inside of the poly-crystalline structures. To predict the response of a certain polycrystalline structure to a specific stress, you must resort to one of two views on grain interaction, an orientation or propagation based model. For every material there may be certain correlations between the prediction model used and the actual deformation that occurred. Our work centers around describing the correlation of these prediction models with a sample of naturally deformed …

Undergraduate Research Opportunities Program 2011, Nicholle Booker, University Of Nevada, Las Vegas

Undergraduate Research Opportunities Program (UROP)

Undergraduate Research Opportunities Program

On August 9, 2011 the UNLV College of Sciences will celebrate the accomplishments of undergraduate students participating in the Summer 2011 Undergraduate Research Opportunities Program (UROP) and the Research Experience For Undergraduates (REU) Program.

The public is invited to attend, beginning at 10:00 a.m.

Please join us to view student research posters. Student research topics include: biomedicine and human health, Nevada's fragile environment and ecosystems, climate change, stem cell research, microbiology, astrophysics, and many others.

Over 25 UNLV undergraduates and a cohort of 25 undergraduates selected from colleges and universities across the nation will mark the …

Methods Of Using Black Bear Parathyroid Hormone, Seth W. Donahue

Michigan Tech Patents

Black bear parathyroid hormone (PTH) and functional fragments thereof are provided. Also provided are methods of using black bear PTH and functional fragments for increasing cAMP in a bone-forming cell; reducing apoptosis in a boneforming cell; decreasing the ratio of expression levels of Bax protein to Bcl-2 protein in a bone-forming cell; increasing the expression level of one or more of a bone matrix protein, a transcriptional activator, or a transcriptional regulator in a bone-forming cell; enhancing bone mineral density, increasing bone mass, decreasing bone loss, or reducing the incidence of bone fractures, or any combination thereof, in a subject; …

Achieving Grid Parity For Large Scale Photovoltaic Systems In New Jersey, Ulrich Schwabe

Theses and Dissertations

With photovoltaic (PV) power systems becoming ever more prevalent in today's world, it is an inevitability that this renewable energy technology becomes more competitive from a price standpoint. Explored in this thesis are several engineering optimization and cost reduction methods that will enable large scale PV system costs to achieve grid parity in the next few years without requiring government subsidies or market support techniques. This research included actual data from numerous real world, large scale photovoltaic projects the author engineered in the northeastern United States and is informed by those design optimizations, best practice guidelines for proper photovoltaic system …

Tailoring The Spectral Transmission Of Optofluidic Waveguides, Brian S. Phillips

Theses and Dissertations

Optofluidics is a relatively new and exciting field that includes the integration of optical waveguides into microfluidic platforms. The purpose of this field of study is to miniaturize previously developed optical systems used for biological and chemical analysis with the end goal of placing bench-top optics into microscopic packages. Mundane optical alignment and sample manipulation procedures would then be intrinsic to the platform and allow measurements to be completed quickly and with reduced human interaction. Biosensors based on AntiResonant Reflecting Optical Waveguides (ARROWs) consist of hollow-core waveguides used for fluid sample manipulation and analysis, as well as solid-core waveguides used …

Roles Of Particle-Wall And Particle-Particle Interactions In Highly Confined Suspensions Of Spherical Particles Being Sheared At Low Reynolds Numbers, Ashok S. Sangani, Andreas Acrivos, Philippe Peyla

Biomedical and Chemical Engineering - All Scholarship

The roles of particle-wall and particle-particle interactions are examined for suspensions of spherical particles in a viscous fluid being confined and sheared at low Reynolds numbers by two parallel walls moving with equal but opposite velocities. Both particle-wall and particle-particle interactions are shown to decrease the rotational velocity of the spheres, so that in the limit of vanishingly small gaps between the spheres and the walls, the spheres acquire a rotational slip relative to the walls. The presence of the walls also increases the particle stresslet and, therefore, the total viscous dissipation. In the limit of vanishingly small gaps, the …

Automated Polysomnographic Assessment For Rapid Eye Movement Sleep Behavior Disorder, Joseph W. Burns, Ronald D. Chervin

Michigan Tech Patents

Methods and systems for diagnosing or assessing rapid eye movement sleep behavior disorder (RBD). Muscle tone or activity variance during rapid eye movement (REM) and nonrapid eye movement (NREM) sleep intervals of a polysom- nogram are compared. A threshold based on the NREM data is used to identify a subj ect-specific threshold for abnormality in the REM variance. A metric that includes the percentage of REM variance exceeding the threshold relates to RBD.