Engineering Commons^™

System Identification And State Estimation For Intake Manifold Charge Flow Temperature Of A Compression Ignition Diesel Engine, Ryle D. Maxson

Master's Theses - Daytona Beach

Intake manifold charge temperature is a factor used in mean value engine models (MVEMs) for the calculation of intake mass air charge and oxygen flow. More stringent emission requirements have led to increased deployment of more advanced engine combustion models onto production engine controllers. Measurement of the temperature via physical thermocouple sensors mounted to the engine intake manifold is both slow, in comparison to the changing conditions of an engine, and undesirable due to the cost and increased complexity of extra sensors. A state estimation model has been evaluated that imitates the function of the intake manifold temperature sensor reading, …

East Bay Energy Consortium Meeting Agenda, September 20, 2010, East Bay Energy Consortium

East Bay Energy Consortium Meeting Agenda

No abstract provided.

Base Shear Estimated From Floor Accelerations And Column Shears, Rakesh K. Goel

Civil and Environmental Engineering

This paper compares base shear computed from floor accelerations (inertial base shear) and column shears (structural base shear) for several single-degree-of-freedom (SDF) systems and two mid-rise, multi-story buildings due to a suite of 30 earthquake ground motions. The presented results show that the inertial base shear is close to structural base shear in short-period (<1 >sec) SDF systems but may significantly exceed the structural base shear for individual ground motions in longer period (> 1 sec) SDF systems. Furthermore, the inertial base shear exceeds the structural base shear in the median by 10% to 20% and may exceed the structural …

Coherent Electron Transport By Adiabatic Passage In An Imperfect Donor Chain, Rajib Rahman, Richard P. Muller, James E. Levy, Malcolm S. Carroll, Gerhard Klimeck, Andrew D. Greentree, Lloyd C. L. Hollenberg

Birck and NCN Publications

Coherent Tunneling Adiabatic Passage (CTAP) has been proposed as a long-range physical qubit transport mechanism in solid-state quantum computing architectures. Although the mechanism can be implemented in either a chain of quantum dots or donors, a 1D chain of donors in Si is of particular interest due to the natural confining potential of donors that can in principle help reduce the gate densities in solid-state quantum computing architectures. Using detailed atomistic modeling, we investigate CTAP in a more realistic triple donor system in the presence of inevitable fabrication imperfections. In particular, we investigate how an adiabatic pathway for CTAP is …

Uncertainty Quantification Study For A Comprehensive Electrostatic Mems Switch Model, Michael G. Snow, Anil K. Bajaj

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

This work presents an uncertainty analysis of a comprehensive model for an electrostatic MEMS switch. The goal is to elucidate the effects of parameter variations on certain performance characteristics. A sufficiently detailed model of an electrostatically actuated beam is developed. This model accounts for various physical effects, including the electrostatic fringing field, finite length of electrodes, squeeze film damping, and contact between the beam and the dielectric layer. The performance characteristics of immediate interest are the static and dynamic pull-in voltages for switch. Using Latin Hypercube and other sampling methods, the model is evaluated to find these performances characteristics when …

Fetal Breathing Movement And Its Distinctive Characteristics In Bio-Magnetic Data, Umit Deniz Ulusar

Theses and Dissertations

Magnetoencephalography (MEG) is widely used to study magnetic fields generated by the electrical activity of the human brain and can also be applied for fetal neurological health assessment. The fetal MEG (fMEG) signals are often contaminated with other bio-magnetic signals such as fetal breathing movement (FBM), which acts as an interfering factor for fetal neurological signals. This study was carried out to identify the bio-magnetic signals pertinent to the FBM. The fMEG signals were captured using superconducting quantum interference devices (SQUIDs) and the FBMs were recorded by an ultrasound-based video technique. The simultaneous recording is challenging since SQUIDs are extremely …

Signal Detection Framework Using Semantic Text Mining Techniques, Sithu D. Sudarsan

Theses and Dissertations

Signal detection is a challenging task for regulatory and intelligence agencies. Subject matter experts in those agencies analyze documents, generally containing narrative text in a time bound manner for signals by identification, evaluation and confirmation, leading to follow-up action e.g., recalling a defective product or public advisory for potential flu outbreak. Technical challenges to achieve effective signal detection include mining unstructured data, increasing document collections, and presence of multi-domain vocabulary. Lack of annotation and multi-domain vocabulary makes traditional semantic web mining ineffective. Use of heuristics to enhance bag-of-words type text mining to semantic text mining is a novel idea attempted …

Predicting Stability Of Alpha-Helical, Orthogonal-Bundle Proteins On Surfaces, Shuai Wei, Thomas A. Knotts

Faculty Publications

The interaction of proteins with surfaces is a key phenomenon in many applications, but current understanding of the biophysics involved is lacking. At present, rational design of such emerging technologies is difficult as no methods or theories exist that correctly predict how surfaces influence protein behavior. Using molecular simulation and a coarse-grain model, this study illustrates for the first time that stability of proteins on surfaces can be correlated with tertiary structural elements for alpha-helical, orthogonal-bundle proteins. Results show that several factors contribute to stability on surfaces including the nature of the loop region where the tether is placed and …

Reliable Delay Constrained Multihop Broadcasting In Vanets, Martin Koubek, Susan Rea, Dirk Pesch

NIMBUS Articles

Vehicular communication is regarded as a major innovative feature for in-car technology. While improving road safety is unanimously considered the major driving factor for the deployment of Intelligent Vehicle Safety Systems, the challenges relating to reliable multi-hop broadcasting are exigent in vehicular networking. In fact, safety applications must rely on very accurate and up-to-date information about the surrounding environment, which in turn requires the use of accurate positioning systems and smart communication protocols for exchanging information. Communications protocols for VANETs must guarantee fast and reliable delivery of information to all vehicles in the neighbourhood, where the wireless communication medium is …

Mirthconnect Howto Document, Sebastien Pardon, Damon Berry

Reports

This document aims at describing the steps involved in installing and configuring Mirth Connect so as to produce an EN13606-compliant record extract from an HL7v2 message using the LinkedEHR- produced xquery.

Design And Wind Tunnel Testing Of Cal Poly's Amelia 10 Foot Span Hybrid Wing-Body Low Noise Cestol Aircraft, Kristina K. Jameson, David D. Marshall, Robert Ehrmann, Eric Paciano, Rory Golden, Dave Mason

Aerospace Engineering

California Polytechnic Corporation, Georgia Tech Research Institute (GTRI), and DHC Engineering collaborated on a NASA NRA to develop and validate predictive capabilities for the design and performance of Cruise Efficient, Short TakeOff and Landing (CESTOL) subsonic aircraft. In addition, a large scale wind tunnel effort to validate predictive capabilities for aerodynamic performance and noise during takeoff and landing has been undertaken.

The model, Advanced Model for Extreme Lift and Improved Aeroacoustics (AMELIA), was designed as a 100 passenger, N+2 generation, regional, CESTOL airliner with hybrid blended wingbody with circulation control. The model design was focused on fuelsavings and noise goals …

Real-Time Study Of A Current Controlled Plug-In Vehicle For Vehicle-To-Grid Transaction, P. Mitra, Ganesh K. Venayagamoorthy, Keith Corzine

Electrical and Computer Engineering Faculty Research & Creative Works

A real-time model of a current controlled plugin electric vehicle (PEV) parking lot (SmartPark) has been presented in this paper. the controller of the SmartPark is designed in such a way that the active and reactive power transaction with the grid can be controlled independently. Also, the controller limits the current going out of the vehicle during grid faults for batter protection. the real-time modeling is carried out on a Real-Time Digital Simulator (RTDS). Initially, the performance of the controller is studied while being connected to an infinite bus. Also, twelve such parking lot models are integrated to a 12-bus …

Effect Of Plant Uptake Strategy On The Water-Optimal Root Depth, Andrew J. Guswa

Engineering: Faculty Publications

The depth of plant roots depends on a variety of conditions, including soil properties, vegetation type, nutrient availability, and climate. A water-optimal root depth is determined by equating the marginal carbon cost of deeper roots with the benefit of those roots to continued transpiration. This work compares the effect of two bounding strategies of plant uptake, conservative and intensive, on the water-optimal root depth and the response of that depth to changes in precipitation. While there are some differences between the models, both indicate similar responses of root depth to climate. The deepest roots are found in climates for which …

Deformation Waves In Microstructured Materials: Theory And Numerics, Juri Engelbrecht, Arkadi Berezovski, Mihhail Berezovski

Publications

A linear model of the microstructured continuum based on Mindlin theory is adopted which can be represented in the framework of the internal variable theory. Fully coupled systems of equations for macro-motion and microstructure evolution are represented in the form of conservation laws. A modification of wave propagation algorithm is used for numerical calculations. Results of direct numerical simulations of wave propagation in periodic medium are compared with similar results for the continuous media with the modelled microstructure. It is shown that the proper choice of material constants should be made to match the results obtained by both approaches

Qpsk And Oqpsk In Frequency Nonselective Fading, Michael D. Rice

Faculty Publications

The maximum likelihood estimator for the fading gain in a frequency non-selective fading channel is derived and analyzed for offset QPSK (OQPSK). The corresponding impact of estimator errors on the bit error probability performance for OQPSK is also derived.

Pilot Evaluation Of Energy Savings And Persistence From Residential Energy Demand Feedback Devices In A Hot Climate, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

According to past studies, providing instantaneous feedback on household electrical demand has shown the promise to typically reduce energy consumption by 5-10%. This paper briefly reviews past research and describes a two year pilot evaluation of a low cost residential energy feedback system installed in twenty case study homes in Florida. Although not a statistical sample (the participants were self-selected and interested in reducing energy use), the study showed an average 7% reduction in energy use from feedback homes in the second year of monitoring after controlling for weather-related influences. However, a follow-up evaluation done three years later found little …

Developing Intelligent Engineering Collaboration Tools Through The Use Of Design Rationale, Jordan David Ryskamp

Theses and Dissertations

This thesis presents a new method that improves upon the existing approaches to developing collaborative tools. The new method uses automatically inferred and manually recorded design rationale to intelligently filter the information that is shared by a collaborative tool. This represents an improvement upon the existing state of the art in collaborative engineering tools. To demonstrate the viability of the method three collaborative tools were created. The first is a multi-user collaborative design environment tool named SimulPart and built upon the NX CAD package. SimulPart uses the new method to limit the amount of communication required to keep every user …

East Bay Energy Consortium Meeting Agenda, September 15, 2010, East Bay Energy Consortium

East Bay Energy Consortium Meeting Agenda

No abstract provided.

Paper Chase: Resources To Organize Your Papers And Bibliographies, Sharon Bradley

Presentations

Shares data and information management software that is freely available on the Internet for personal and professional use. Includes overviews of Zotero, Evernote, and Mendeley, which enable users to format bibliographies as well as share and save important information as documents, photographs and audio files.

Mission Performance As Point Performance, Robert A. Mcdonald

Aerospace Engineering

The cruise or loiter performance of an aircraft is intimately tied to its wing loading (W/S) and its thrust to weight ratio (T/W). Paradoxically, mission performance is often not considered when these fundamental aircraft parameters are determined in conceptual design. In this research, the traditional constraint diagram is extended to include contours of range parameter. This point performance metric represents the mission performance capability of the aircraft without sizing the aircraft to a particular mission. This gives the designer an immediate and intuitive understanding of the tradeoff between the point and mission performance of the aircraft. This improved constraint diagram …

Improving The Quality Of Service And Security Of Military Networks With A Network Tasking Order Process, Matthew D. Compton

Theses and Dissertations

This research presents a Network Tasking Order process that collects mission plans, network capabilities, and historical records to build a Network Tasking Order (NTO). The NTO document directs the form and usage of the network, much like an Air Tasking Order (ATO) directs the usage of air power. The NTO process is fleshed out with the content and format of the NTO given herein for the first time. Tools such as topology control algorithms are then shown through simulation to improve the quality of service of the network by finding favorable ways to connect the assets identified during the NTO …

Improving Range Estimation Of A 3d Flash Ladar Via Blind Deconvolution, Jason R. Mcmahon

Theses and Dissertations

The purpose of this research effort is to improve and characterize range estimation in a three-dimensional FLASH LAser Detection And Ranging (3D FLASH LADAR) by investigating spatial dimension blurring effects. The myriad of emerging applications for 3D FLASH LADAR both as primary and supplemental sensor necessitate superior performance including accurate range estimates. Along with range information, this sensor also provides an imaging or laser vision capability. Consequently, accurate range estimates would also greatly aid in image quality of a target or remote scene under interrogation. Unlike previous efforts, this research accounts for pixel coupling by defining the range image mathematical …

Determining The Index Of Refraction Of An Unknown Object Using Passive Polarimetric Imagery Degraded By Atmospheric Turbulence, Milo W. Hyde Iv

Theses and Dissertations

In this research, an algorithm is developed to estimate the index of refraction of an unknown object using passive polarimetric images degraded by atmospheric turbulence. The algorithm uses a variant of the maximum-likelihood blind-deconvolution algorithm developed by LeMaster and Cain to recover the true object (i.e., the first Stokes parameter), the degree of linear polarization, and the polarimetric-image point spread functions. Nonlinear least squares is then used to find the value of the complex index of refraction which best fits the theoretical degree of linear polarization, derived using a polarimetric bidirectional reflectance distribution function, to the turbulence-corrected degree of linear …

Hijacking User Uploads To Online Persistent Data Repositories For Covert Data Exfiltration, Curtis P. Barnard

Theses and Dissertations

As malware has evolved over the years, it has gone from harmless programs that copy themselves into other executables to modern day botnets that perform bank fraud and identity theft. Modern malware often has a need to communicate back to the author, or other machines that are also infected. Several techniques for transmitting this data covertly have been developed over the years which vary significantly in their level of sophistication. This research creates a new covert channel technique for stealing information from a network by piggybacking on user-generated network traffic. Specifically, steganography drop boxes and passive covert channels are merged …

Orbital Tori Construction Using Trajectory Following Spectral Methods, Ralph E. Bordner Iii

Theses and Dissertations

By assuming the motion of a satellite about the earth’s geopotential mimics the known Kolmogorov-Arnold-Moser (KAM) solution of a lightly perturbed integrable Hamiltonian system, this research focused on applying trajectory following spectral methods to estimate orbital tori from sampled orbital data. From an estimated basis frequency set, orbital data was decomposed into multi-periodic Fourier series, essentially compressing ephemerides for long-term use. Real-world Global Positioning System (GPS) orbital tracks were decomposed and reconstructed with error from as low as few kilometers per coordinate axis over a 10-week span to tens of kilometers per coordinate axis over the same time period, depending …

Providing A Theoretical Basis For Nanotoxicity Risk Analysis Departing From Traditional Physiologically-Based Pharmacokinetic (Pbpk) Modeling, Dirk P. Yamamoto

Theses and Dissertations

The same novel properties of engineered nanoparticles that make them attractive may also present unique exposure risks. But, the traditional physiologically-based pharmacokinetic (PBPK) modeling assumption of instantaneous equilibration likely does not apply to nanoparticles. This simulation-based research begins with development of a model that includes diffusion, active transport, and carrier mediated transport. An eigenvalue analysis methodology was developed to examine model behavior to focus future research. Simulations using the physicochemical properties of size, shape, surface coating, and surface charge were performed and an equation was determined which estimates area under the curve for arterial blood concentration, which is a surrogate …

Exploring The Effects Of International Traffic In Arms Regulations Restrictions On Innovation In The U.S. Space Industrial Base, Kalliroi L. Landry

Theses and Dissertations

The International Traffic in Arms Regulations (ITAR) are used to protect United States (U.S.) military technologies. However, changes to ITAR export controls regarding space technologies have had a major impact to the U.S. space industry. The literature mentions a concern for the health of lower-tier firms because they are a major source of innovation, but there is no additional information considering the effects of ITAR on space innovation at those lower tiers. The purpose of this thesis was to explore the implications of continuing the current ITAR restrictions with regard to innovation in the space industry. This research used a …

Knowledge-Based Decision Support In Department Of Defense Acquisitions, Clifton L. Hicks

Theses and Dissertations

Despite numerous reform efforts over the past 30 years, acquisition programs in the Department of Defense (DoD) continue to experience cost overruns and schedule delays. One contributing factor is the decision-making process used by defense officials. The General Accounting Office (GAO) has stated that ‘poor program outcomes are the lack of widespread adoption of a knowledge-based acquisition process within DoD despite polices that support such a process. A knowledge-based business case at the outset of each program would alleviate overpromising on cost, schedule, and performance and would empower program managers.’ Effective decision-making for acquisition programs is very important. It not …

Satellite Capabilities Mapping - Utilizing Small Satellites, David A. Grigsby

Theses and Dissertations

The cost and schedule advantages small satellites have over larger legacy systems have been studied, but there has been very little experimentation performed to determine whether small satellites can actually deliver the capabilities of larger spacecraft. To date, a desired operational capability has not been fully realized by a scalable satellite design. Advances in sensor technology have led to significant reductions in size, weight, and power (SWaP) presenting an opportunity to exploit the evolution of space operations by using small satellites to perform specific missions. This paper describes a methodology that maps a specific set of large space vehicle capabilities …

Analysis Of Construction-Related Research Compared To Needs Of Industry Professionals, Sterling Graham

Theses and Dissertations

Research plays a large role in the advancement of any industry. It is particularly important that relevant research is performed in an industry as large and critical as the construction industry. A review of literature shows that historically research has not played a major role in the advancement of the construction industry. The work of this thesis was to explore whether there has been a change in this relationship, or not. This thesis explored whether the construction-related research being done is in alignment with the needs of industry. Comparisons of the rankings of construction research and industry views were done …