Engineering Commons^™

The Fourier Spectrum Element Method For Vibration And Power Flow Analysis Of Complex Dynamic Systems, Hongan Xu

Wayne State University Dissertations

A general numerical method, the so-called Fourier-Space Element Method (FSEM), is proposed for the vibration and power flow analyses of complex built-up structures. In a FSEM model, a complex structure is considered as a number of interconnected basic structural elements such as beams and plates. The essence of this method is to invariably express each of displacement functions as an improved Fourier series which consists of a standard Fourier cosine series plus several supplementary series/functions used to ensure and improve the uniform convergence of the series representation. Thus, the series expansions of the displacement functions and their relevant derivatives are …

Imaging The Vasculature With Susceptibility Weighted Imaging: Applications And Analysis, Samuel Barnes

Wayne State University Dissertations

Modern magnetic resonance imaging sequences allow detailed non-invasive imaging of both the arteries and veins. This work is divided into four sections that examine different applications and analysis of these sequences.

Susceptibility weighted imaging (SWI) typically generates excellent negative venous contrast. Techniques to generate positive arterial contrast in SWI images without degrading the venous contrast with a single echo are examined. By using high isotropic resolution and high readout bandwidth flow losses can be minimized (generating good arterial contrast) even at the long echo times required for good venous contrast. A downsampling filter is then used to restore lost venous …

Accelerated Lattice Boltzmann Method For Colloidal Suspensions Rheology And Interface Morphology, Hassan Farhat

Wayne State University Dissertations

ABSTRACT

ACCELERATED LATTICE BOLTZMANN MODEL FOR COLLOIDAL SUSPENSIONS RHEOLOGY AND INTERFACE MORPHOLOGY

by

HASSAN FARHAT

July 2010

Advisor: Dr. Singh Trilochan

Co-Advisor: Dr. Joon Sang Lee

Major: Mechanical Engineering

Degree: Doctor of Philosophy

Colloids are ubiquitous in the food, medical, cosmetic, polymer, water purification and pharmaceutical industries. Colloids thermal, mechanical and storage properties are highly dependent on their interface morphology and their rheological behavior.

Numerical methods provide a cheap and reliable virtual laboratory for the study of colloids. However efficiency is a major concern to address when using numerical methods for practical applications.

This work introduces the main building-blocks for …

Robust Observers And Controllers For Marine Surface Vessels Undergoing Maneuvering And Course-Keeping Tasks, Nassim Khaled

Wayne State University Dissertations

The dynamic behavior of marine surface vessels is highly nonlinear. Moreover, it is significantly influenced by environmental disturbances induced by winds, random sea waves and currents. To yield a desired response of the ship, the guidance and control system of the ship should be robust to both modeling imprecision and significant environmental disturbances.

The focus of the current work is threefold. First, a six degree-of-freedom nonlinear model for a marine surface vessel is developed. It accounts for the coriolis and centripetal acceleration terms, added mass and wave damping terms, wave excitation forces, so-called "memory" effect terms, nonlinear restoring forces, wind …

Effects Of The Antimicrobial Tylosin On The Microbial Community Structure Of An Anaerobic Sequencing Batch Reactor, Toshio Shimada, Xu Li, Julie L. Zilles, Eberhard Morgenroth, Lutgarde Raskin

Department of Civil and Environmental Engineering: Faculty Publications

The effects of the antimicrobial tylosin on a methanogenic microbial community were studied in a glucosefed laboratory-scale anaerobic sequencing batch reactor (ASBR) exposed to stepwise increases of tylosin (0, 1.67, and 167 mg/L). The microbial community structure was determined using quantitative fluorescence in situ hybridization (FISH) and phylogenetic analyses of bacterial 16S ribosomal RNA (rRNA) gene clone libraries of biomass samples. During the periods without tylosin addition and with an influent tylosin concentration of 1.67 mg/L, 16S rRNA gene sequences related to Syntrophobacter were detected and the relative abundance of Methanosaeta species was high. During the highest tylosin dose of …

Using Bayesian Inference In Design Applications, Chung Yong Chan

Electronic Theses and Dissertations

This dissertation presents a new approach for solving engineering design problems such as the design of antenna arrays and finite impulse response (FIR) filters. In this approach, a design problem is cast as an inverse problem. The tools and methods previously developed for Bayesian inference are adapted and utilized to solve design problems. Given a desired design output, Bayesian parameter estimation and model comparison are employed to produce designs that meet the prescribed design specifications and requirements. In the Bayesian inference framework, the solution to a design problem is the posterior distribution, which is proportional to the product of the …

Nonlinear Circuit Analysis Via Perturbation Methods And Hardware Prototyping, Kofi Odame, P. E. Hasler

Dartmouth Scholarship

Nonlinear signal processing is necessary in many emerging applications where form factor and power are at a premium. In order to make such complex computation feasible under these constraints, it is necessary to implement the signal processors as analog circuits. Since analog circuit design is largely based on a linear systems perspective, new tools are being introduced to circuit designers that allow them to understand and exploit circuit nonlinearity for useful processing. This paper discusses two such tools, which represent nonlinear circuit behavior in a graphical way, making it easy to develop a qualitative appreciation for the circuits under study.

Filter Scheduling Function Model In Internet Server: Resource Configuration, Performance Evaluation And Optimal Scheduling, Minghua Xu

Wayne State University Dissertations

ABSTRACT

FILTER SCHEDULING FUNCTION MODEL IN INTERNET SERVER:

RESOURCE CONFIGURATION, PERFORMANCE EVALUATION AND

OPTIMAL SCHEDULING

by

MINGHUA XU

August 2010

Advisor: Dr. Cheng-Zhong Xu

Major: Computer Engineering

Degree: Doctor of Philosophy

Internet traffic often exhibits a structure with rich high-order statistical properties like selfsimilarity

and long-range dependency (LRD). This greatly complicates the problem of

server performance modeling and optimization. On the other hand, popularity of Internet

has created numerous client-server or peer-to-peer applications, with most of them,

such as online payment, purchasing, trading, searching, publishing and media streaming,

being timing sensitive and/or financially critical. The scheduling policy in Internet servers …

Augmented Reality Navigation Interfaces Improve Human Performance In End-Effector Controlled Telerobotics, Keshav Chintamani

Wayne State University Dissertations

On the International Space Station (ISS) and space shuttles, the National Aeronautics and Space Administration (NASA) has used robotic manipulators extensively to perform payload handling and maintenance tasks. Teleoperating robots require expert skills and optimal performance is crucial to mission completion and crew safety. Degradation in performance is observed when manual control is mediated through remote camera views, resulting in poor end-effector navigation quality and extended task completion times. This thesis explores the application of three-dimensional augmented reality (AR) interfaces specifically designed to improve human performance during end-effector controlled teleoperations. A modular telerobotic test bed was developed for this purpose …

Modeling Of Transient Response Of An Elastic Beam With Flexible Supports And Variable-Location Impact, Weiping Xu

Electronic Theses and Dissertations

This research is prerequisite to determining structural health and estimating wear-limited life of contact/impact machinery components. Prevention, or at least early notification, of impact-induced wear is essential for preventing economic loss and enhancing personnel safety. Thus, an efficient model which is discrete in time and continuous in space was undertaken; an euler-bernoulli beam with adjustable boundary conditions and variable impact is numerically studied under a pulse loading. Structural stiffness, material modulus, contact stiffness, contact location, damping ratio, pulse duration, clearance and boundary conditions are investigated. A reference system is used as the basis for parameter studies and solution convergence is …

Treatment Guidelines For Pavement Preservation, Jusang Lee, Todd Shields

JTRP Technical Reports

This project presents pavement treatment practice guidelines and a distress identification manual for the purpose of improving the INDOT pavement preservation practices. The treatment guidelines consist of 10 treatment types for asphalt pavements and composite pavements and 8 treatment types for Portland cement concrete pavement (PCCP). The treatment guidelines include treatment descriptions, benefits, applicable pavement conditions, treatment materials, and treatment procedures. The guidelines are based on information obtained mainly from the INDOT Standard Specification, the INDOT Design Manual, and the INDOT Field Operations Handbook for Crew Leaders. The treatments are covered in the guidelines. The distress identification manual presents the …

Automated Pavement Condition Data Collection Quality Control, Quality Assurance, And Reliability, Ghim Ping (Raymond) Ong, Samy Noureldin, Kumares C. Sinha

JTRP Technical Reports

In recent years, state highway agencies have come to understand the need for high quality pavement condition data at both the project and network levels. At the same time, agencies also realize that they have become too dependent on contractors to ensure the quality of the delivered data without any means to independently assure the quality of these delivered data. This research study therefore aims to investigate the inherent variability of the automated data collection processes and proposes guidelines for an automated data collection quality management program in Indiana. In particular, pavement roughness data (in terms of IRI) and pavement …

Effects Of A Mass Layer With Gradually Varying Thickness On A Quartz Crystal Microbalance, Nan Liu, Jiashi Yang, Weiqiu Chen

Department of Mechanical and Materials Engineering: Faculty Publications

We study the effects of the nonuniform thickness of a thin mass layer on a quartz crystal microbalance. A theoretical analysis is performed on thickness-shear vibration of an AT-cut quartz plate with a nonuniform mass layer. Mindlin’s two-dimensional equation for thickness-shear vibration of a quartz plate is used. Free vibration frequencies and modes are obtained. The effects of the mass layer nonuniformity are examined. It is shown that resonant frequencies and energy trapping of thickness-shear modes are sensitive to mass layer nonuniformity.

A Computational Analysis Of Cognitive Effort, Luca Longo, Stephen Barrett

Books/Book Chapters

Cognitive effort is a concept of unquestionable utility in understanding human behaviour. However, cognitive effort has been defined in several ways in literature and in everyday life, suffering from a partial understanding. It is common to say “Pay more attention in studying that subject” or “How much effort did you spend in resolving that task?”, but what does it really mean? This contribution tries to clarify the concept of cognitive effort, by introducing its main influencing factors and by presenting a formalism which provides us with a tool for precise discussion. The formalism is implementable as a computational concept and …

Manual Handling Workload And Musculoskeletal Discomfort Among Warehouse Personnel, Terrance N. Knox

Walden Dissertations and Doctoral Studies

Work-related musculoskeletal disorders (WRMSD), specifically physical and muscular discomfort in the upper arm, lower arm, thigh, lower leg, wrist, shoulders, back, or neck, are among the most frequently reported workplace injuries in the United States. The dearth of knowledge about the types of workloads that may contribute to the development of WRMSD was the impetus of this research. The study aimed to identify antecedents of WRMSD among warehouse workers in order to reduce WRMSDs and increase productivity as expressed in a systems perspective on industrial health. The research questions examined the prevalence of specific WRMSDs, the relationship of high-risk tasks …

Optimization Of Inductively Coupled Plasma Dry Etching For Planar Waveguide Fabrication., Lim Weng Hong

Student Works (2010-2019)

Optimization of the Inductively Coupled Plasma (ICP) dry etching process parameters has been carried out. Seven main etching characteristics were considered in order to produce good etching quality. These characteristics are glass etching rates, selectivity of chromium to glass etching rate, channel side wall roughness, channel side wall vertical profile, channel cleanliness, critical dimension and resolution. Several ICP parameters that are affecting the etching characteristic were optimized in this work. These optimised ICP parameters obtained from this work are ICP power (880 W), bias power (45 W), operating chamber pressure (10 mtorr), reactant gas composition, reactant gas flow rate (35sccm …

A Variational Approach To Non-Newtonian Flow In Angular Pores: An Application To Enchanced Oil Recovery, Nithin Kavoori

Open Access Theses & Dissertations

With an alarming rise in carbon dioxide (CO2) emission from anthropogenic sources, CO2 sequestration has become an attractive choice to mitigate the emission. Some popular storage media for CO2 are oil reservoirs, deep coal-bed, deep oceanic-beds. These have been used for the long term CO2 storage. Due to special lowering viscosity and surface tension property of CO2, it has been widely used for enhanced oil recovery. The sites for CO2 sequestration or enhanced oil recovery mostly consist of porous rocks. In this thesis work, I focus on understanding the flow through porous at pore-level using variational approach.

Variational approach is …

Hybrid Manufacturing: Integrating Stereolithography And Direct Print Technologies, Amit Lopes

Open Access Theses & Dissertations

The focus of this research was the development of a hybrid manufacturing system that integrates stereolithography (SL) and direct print (DP) technologies to fabricate three dimensional (3D) structural electronic devices within a single set-up. The capabilities of this new additive manufacturing (AM) technology was explored in the context of fabricating and prototyping complex electronic devices in which conformal shape, rugged and light-weight integration, and a natural resistance to reverse engineering are all of paramount importance. Consequently, electronic components can be tightly integrated together in a rugged, light-weight 3D structure of arbitrary form. This research is a continuing advancement of the …

Renewable Energy Integration: An Approach For Micro-Grid Optimization., Nicolas Lopez

Open Access Theses & Dissertations

This thesis explores the Renewable Energy Integration Problem beginning with a literature review on the different sources of electrical energy classified as Non-Renewable and Renewable, stating that the integration of renewable sources within the pre-existing Power-Grids is a current worldwide problem that is being addressed with different approaches.

The impossibility to exactly model the different equations relating the electric output of the renewable energy sources as they relate with meteorological factors, makes the renewable sector a stochastic component of the overall mathematical model, where it can be concluded that most of the problem is in the area of the forecast. …

Computational Study Of Fluid-Valve Interaction Involving Deep Vein Thrombosis, Upendra Parimi

Open Access Theses & Dissertations

The venous valves in veins carry on the important function of eliminating the retrograde (re-verse) flow of blood in veins and help the veins to carry on their work effectively. The abnormal functioning of venous valves can cause deep vein thrombosis (DVT) which is a phenomena caused by clotting in deep veins. The importance of the thesis work lies in understanding the role of blood flow dynamics in Deep Vein Thrombosis (DVT). Elderly People and pregnant women are the ones who are most likely to develop DVT. It was determined from previous studies that women in their postpartum period are …

Investigation And Modeling Of Ice Fracture In Cold Ocean Engineering Applications, Rocky S. Taylor

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

Ice conditions present a significant challenge in the design of ships and structures for the development of offshore energy resources in cold ocean environments. Many regions throughout the world including Alaska, Canada, Russia, Norway, Kazakhstan and China are developing offshore energy resources in ice-prone environments. The growth and stability of the global economy is closely linked to that of our energy supply, and offshore industrial activity in Northern regions has increased significantly in recent years. One of the most significant engineering challenges when designing structures for ice environments is the estimation of design ice loads. The design load scenario for …

Real-Time Model Predictive Control Of Quasi-Keyhole Pipe Welding, Kun Qian

University of Kentucky Doctoral Dissertations

Quasi-keyhole, including plasma keyhole and double-sided welding, is a novel approach proposed to operate the keyhole arc welding process. It can result in a high quality weld, but also raise higher demand of the operator. A computer control system to detect the keyhole and control the arc current can improve the performance of the welding process. To this effect, developing automatic pipe welding, instead of manual welding, is a hot research topic in the welding field.

The objective of this research is to design an automatic quasi-keyhole pipe welding system that can monitor the keyhole and control its establishment time …

Advancements In Transmission Line Fault Location, Ning Kang

University of Kentucky Doctoral Dissertations

In modern power transmission systems, the double-circuit line structure is increasingly adopted. However, due to the mutual coupling between the parallel lines it is quite challenging to design accurate fault location algorithms. Moreover, the widely used series compensator and its protective device introduce harmonics and non-linearities to the transmission lines, which make fault location more difficult. To tackle these problems, this dissertation is committed to developing advanced fault location methods for double-circuit and series-compensated transmission lines.

Algorithms utilizing sparse measurements for pinpointing the location of short-circuit faults on double-circuit lines are proposed. By decomposing the original network into three sequence …

Extraction And Prediction Of System Properties Using Variable-N-Gram Modeling And Compressive Hashing, Muthulakshmi Muthukumarasamy

University of Kentucky Doctoral Dissertations

In modern computer systems, memory accesses and power management are the two major performance limiting factors. Accesses to main memory are very slow when compared to operations within a processor chip. Hardware write buffers, caches, out-of-order execution, and prefetch logic, are commonly used to reduce the time spent waiting for main memory accesses. Compiler loop interchange and data layout transformations also can help. Unfortunately, large data structures often have access patterns for which none of the standard approaches are useful. Using smaller data structures can significantly improve performance by allowing the data to reside in higher levels of the memory …

Analysis And Optimization Of Electrical Systems In A Solar Car With Applications To Gato Del Sol Iii-Iv, Krishna Venkatesh Prayaga

University of Kentucky Master's Theses

Gato del Sol III, was powered by a solar array of 480 Silicon mono-crystalline photovoltaic cells. Maximum Power Point trackers efficiently made use of these cells and tracked the optimal load. The cells were mounted on a fiber glass and foam core composite shell. The shell rides on a lightweight aluminum space frame chassis, which is powered by a 95% efficient brushless DC motor. Gato del Sol IV was the University of Kentucky Solar Car Team’s (UKSCT) entry into the American Solar Car Challenge (ASC) 2010 event. The car makes use of 310 high density lithium-polymer batteries to account for …

Energy Reduction In Automotive Paint Shops A Review Of Hybrid/Electric Vehicle Battery Manufacturing, Claudia Patricia Arenas Guerrero

University of Kentucky Master's Theses

Automotive industry is facing fundamental challenges due to the rapid depletion of fossil fuels, energy saving and environmental concerns. The need of sustainable energy development has motivated the research of energy reduction and renewable energy sources. Efficient use of energy in vehicle manufacturing is demanded, as well as an alternative energy source to replace gasoline powered engines. In this thesis, we introduce a case study at an automotive paint shop, where the largest amount of energy consumption of an automotive assembly plant takes place. Additionally, we present a summary of recent advances in the area of hybrid and electrical vehicles …

Surface Modification Of Carbon Structures For Biological Applications, Elizabeth Irene Maurer

Browse all Theses and Dissertations

Carbon substrates have a wide variety of applications, many of which are enabled by appropriate surface modifications. In particular, the use of carbon-based substrates for biological devices can be quite advantageous due to their relative inertness and biocompatibility. Moreover, graphitic carbon can take many forms ranging from flat sheets to foams, fibers, and nanotubes. In this project, larger carbon substrates such as microcellular foam and flat graphite have been modified with carbon nanotubes, and their potential use in two types of biological applications was tested. The first study involved an investigation of the growth and proliferation of osteoblast cells on …

Extent And Effects Of Selection To Reduce Synthetic Cost Of Highly Expressed Proteins, Esley Marvin Heizer Jr

Browse all Theses and Dissertations

Organisms that preferentially utilize less biosynthetically expensive amino acids in highly expressed genes exhibit metabolic efficiency. Exploration of this phenomenon has been limited to six prokaryotes.

I present a large scale analysis of metabolic efficiency in prokaryotic organisms and analysis of two eukaryotes (Saccharomyces cerevisiae and humans). Examination of 73 bacteria reveals the presence of metabolic efficiency in 66 organisms. The average correlation between amino acid biosynthetic cost and CAI scores in these organisms is -0.21. The seven organisms that did not exhibit metabolic efficiency are all Lactobacilli and highly auxotrophic. Saccharomyces cerevisiae exhibits significant trends between average amino acid …

Computational Study Of Direct Fuel Injection In The Rotax 914 Engine, Brad Pollock

Browse all Theses and Dissertations

Direct injection spark ignition (DISI) is a fuel delivery method in which the fuel is introduced directly into the combustion chamber of an internal combustion engine. Although direct fuel injection was first pioneered in the early 1920's, it has only recently become a reliable option due to advances made in control systems and injection technology. Direct injection enables increased fuel efficiency and higher power output than a conventional Port Fuel Injection (PFI) system. By delivering pressurized fuel directly into the cylinder, the degree of fuel atomization and the fuel vaporization rate are increased. Hence, the air/fuel mixture can be more …

Design And Evaluation Of An Audio-Frequency Transresistance Amplifier For Magnetic Tape Playback, Thomas R. Salvatierra

Browse all Theses and Dissertations

Analog magnetic tape remains a medium of choice for high-fidelity sound recording and reproduction. Some of this fidelity is sacrificed during the tape playback process; an optimized playback preamplifier is therefore critical to the performance of the medium. Existing playback methods integrate the voltage generated across the reproduce head to obtain a signal directly proportional to the remanent magnetic flux of the tape. An alternate playback method proposes the use of a transresistance amplifier to convert flux-proportional reproduce head current directly to voltage. This eliminates the need for voltage integration and minimizes the amount of equalization performed upon playback. Circuit …