Engineering Commons^™

Smore Phase 2: An Upgrade In Valve Systems & Startup Procedure For A Small Methanol Oxygen Liquid Rocket Engine, Christian Soria

Aerospace Engineering

A Methanol-Oxygen liquid rocket engine was designed and manufactured under the California Polytechnic State University Aerospace Department by students in a graduate level rocket propulsion class. The SMORE, previously known as the KORE, is now in an ongoing testing and developing stage with plans to incorporate it into the aerospace undergraduate propulsion lab. Phase 2 of the liquid rocket engine development is to produce a start-up procedure that will improve the safety due to manual operation and poor ignition conditions. A propane ignition system along with the implementation of electrically operated solenoid valves to control the fuels and oxidizer were …

Gerber Project For Lockheed Martin, Andrew Callahan, Sean Lawyer

Industrial Technology and Packaging

Lockheed Martin, the world’s premier aerial combat vehicle manufacturer was pressed to find an eco-friendly way to package their impregnated epoxy. In the current system, the epoxy would be cut on the Gerber table to a pre-determined length and then sandwiched inside of two corrugated fiberboard sheets for storage inside of a freezer. The current process was not only labor intensive, but the corrugated fiberboard had to be disregarded after one use. In conjunction with the Cal Poly San Luis Obispo Packaging program and Melmat Incorporated, we were able to find a corrugated plastic substrate to replace the currently non-reusable …

East Bay Energy Consortium Meeting Minutes, March 1, 2010, East Bay Energy Consortium

East Bay Energy Consortium Meeting Minutes

No abstract provided.

Wind Energy Project Final Report, Daniel Mendelsohn, Deborah Crowley, Applied Science Associates, Inc, East Bay Energy Consortium

East Bay Energy Consortium Documents

No abstract provided.

Acuta Enews March 2010, Vol 39, No. 3

ACUTA Newsletters

ln This lssue

Board of Directors for 2010-2011

From ACUTA Headquarters: Broadband Grants Announced..........Jeri A. Semer, CAE, Executive Dir.

Mark Watters, Ball State University, Wins ACUTA Conference Package

Message from ACUTA Young Professionals Subcommittee ......... Jana McDonald, Texas A&M University

Be a Moderator or Monitor at the Annual Conference

Mutli-Event Discount: Attend More in 2010 and Save More!

Tech Talk: Meeting the Challenge of Measuring UC's Benefits...... Kevin Tanzillo, Dux PR

Washington Update Newsletter

DC Update ..............Dave Ostrom, Washington State Univ. (retired)

Pennsylvania Coalition Awarded $99.6 Million NTIA Grant

ln Memory: Denny Grandowicz

lnfo links............. Randy Hayes, Univ. of Northern …

Adding Precision: Incorporating Constant-Rate Descents Into Non-Precision Approaches, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Feasibility Study Of Bamboo Drumsticks, Edward Chow

Industrial and Manufacturing Engineering

This project is a study on the feasibility of introducing bamboo as an alternative material for the application of drumsticks. The American drumstick industry has been historically very stable and robust due to its commitment to high quality. This high quality comes at the price of large amounts of waste that is largely burned to provide facility heating. With the recent push for corporate responsibility of the total life cycle of their products and the push for increased sustainability, bamboo was considered as a viable resource as a partial alternative or complete replacement. Prototypes of the bamboo drumsticks were fabricated …

Effects Of Crystallographic Orientation On The Early Stages Of Oxidation In Nickel And Chromium, Louis P. Bonfrisco, Megan Frary

Materials Science and Engineering Faculty Publications and Presentations

Surface orientation plays an important role in the oxidation behavior of single crystals where studies have found the relative oxidation rates for surfaces with different orientations. However, most materials are polycrystalline and contain myriad orientations that contribute to the overall oxidation process. Here we determine the effects of orientation on the early stages of oxidation behavior as a function of surface orientation for polycrystalline nickel (face-centered cubic) and chromium (body-centered cubic). After high temperature oxidation, the oxide topography is characterized using optical profilometry and the underlying microstructure is characterized with electron backscatter diffraction (EBSD). By correlating results from EBSD and …

Quality Control Of Soil Water Data In Acis – A Case Study In Nebraska, Jinshing You, Kenneth G. Hubbard, Rezaul Mahmood, Venkataramana Srihar, Dennis Todey

Civil Engineering Faculty Publications and Presentations

Soil moisture is the key state variable from both climate and hydrologic cycle assessment perspectives. Automated measurements of soil moisture were not possible in the past decades. Sensors deployed in the field with real-time monitoring networks such as the Automated Weather Data Network (AWDN) in Nebraska have not only become affordable but enhanced the monitoring capability of the network with valuable soil moisture data added to the existing stream of hourly and daily weather data for precipitation, air temperature, humidity, solar radiation, wind speed, and soil temperature. However, to assure the quality of the data, quality control (QC) tools are …

Height Adjustment In Assessing Dual Energy X-Ray Absorptiometry Measurements Of Bone Mass And Density In Children, Babette S. Zemel, Mary B. Leonard, Andrea Kelly, Joan M. Lappe, Vicente Gilsanz, Sharon Oberfield, Soroosh Mahboubi, John A. Shepherd, Thomas N. Hangartner, Margaret M. Frederick, Karen K. Winer, Heidi J. Kalkwarf

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Context: In children, bone mineral content (BMC) and bone mineral density (BMD) measurements by dual-energy x-ray absorptiometry (DXA) are affected by height status. No consensus exists on how to adjust BMC or BMD (BMC/BMD) measurements for short or tall stature.

Objective: The aim of this study was to compare various methods to adjust BMC/BMD for height in healthy children.

Design: Data from the Bone Mineral Density in Childhood Study (BMDCS) were used to develop adjustment methods that were validated using an independent cross-sectional sample of healthy children from the Reference Data Project (RDP).

Setting: We conducted the study in five …

Building A Successful Transatlantic Collaboration In Engineering/Technological Education; Lessons From A Six Year Journey, Donal Mchale, Mark Mcgrath, John Lawlor

Conference Papers

This paper reflects on key learning’s from the first six-years (2004-2010) of the development of a collaborative journey of two trans-Atlantic higher-educational institutions. It describes the progress towards building a sustainable and innovative international educational partnership in Engineering/Technological education between the Technological University Dublin,DublinIrelandandPurdue University,Indiana,USA.

In particular, the paper provides insight into the iterative stages of development of this relationship. It reflects on some of the key challenges and it recognises the critical enablers of success. It focuses on challenges and solutions in the following six important areas

(i) The partnership initiation stage. Key considerations and important enablers of future …

New Approach For Surface N Factors, James L. Hanson, Nazli Yesiller, Gareth E. Swarbrick, Wei-Lien Liu

Civil and Environmental Engineering

Air and surface freezing and thawing indexes and prediction of ground temperatures from air temperatures were investigated. A new method for applying n factors on a daily basis to capture localized temperature extremes is presented and compared to conventional seasonal n-factor analysis. Measured air temperatures from five locations and measured air and surface temperatures from one location were used. Freezing and thawing indexes were determined using daily and monthly average temperatures, different time frames, and seasonal and daily applications of n factors. Air and surface freezing indexes (I_af and I_sf) varied more than air and surface …

Gusto: An Automatic Generation And Optimization Tool For Matrix Inversion Architectures, Ali Irturk, Bridget Benson, Shahnam Mirzaei, Ryan Kastner

Electrical Engineering

Matrix inversion is a common function found in many algorithms used in wireless communication systems. As FPGAs become an increasingly attractive platform for wireless communication, it is important to understand the trade-offs in designing a matrix inversion core on an FPGA. This article describes a matrix inversion core generator tool, GUSTO, that we developed to ease the design space exploration across different matrix inversion architectures. GUSTO is the first tool of its kind to provide automatic generation of a variety of general-purpose matrix inversion architectures with different parameterization options. GUSTO also provides an optimized applicationspecific architecture with an average of …

Axle Assembly Takt Time Change, Punit Shivji

Industrial and Manufacturing Engineering

The Toyota managed New United Motor Manufacturing Inc. automotive plant is currently going through difficult economic times. To prepare for future production demands, the plant will need to decrease production output and maintain a lower volume of vehicles produced with a high level of quality and efficiency. This project will take on the reorganization of the rear axle assembly lines and the departments that are involved to ensure a cost effective, efficient, and safe approach in manufacturing Toyota's Tacomas. Toyota recommends the Toyota production system as well as any knowledge and experience obtained from previous jobs and coursework to be …

Peak Stir Zone Temperatures During Friction Stir Processing, Sprinivasan Swaminathan, Keiichiro Oh-Ishi, Alexander P. Zhilyaev, Christian B. Fuller, Blair London, Murray W. Mahoney, Terry R. Mcnelly

Materials Engineering

The stir zone (SZ) temperature cycle was measured during the friction stir processing (FSP) of NiAl bronze plates. The FSP was conducted using a tool design with a smooth concave shoulder and a 12.7-mm step-spiral pin. Temperature sensing was accomplished using sheathed thermocouples embedded in the tool path within the plates, while simultaneous optical pyrometry measurements of surface temperatures were also obtained. Peak SZ temperatures were 990 ⁰Cto 1015 ⁰C (0.90 to 0.97 TMelt) and were not affected by preheating to 400⁰C, although the dwell time above 900 ⁰C was increased by the preheating. Thermocouple data suggested little variation in …

Analysis Of An Economic Order Quantity And Reorder Point Inventory Control Model For Company Xyz, Jose L. Gonzalez, Daniel Gonzalez

Industrial and Manufacturing Engineering

As a result to today’s uncertain economy, companies are searching for alternative ways to stay competitive. In which, Company XYZ has been faced with an ineffective forecasting method that has lead to multiple product stock outs. The issue faced has caused sales loss as well as profit loss, which companies can not afford to lose if they want to stay competitive. This project goes through the process of analyzing the company’s current forecasting model and recommending an inventory control model to help them solve their current issue. As a result, an Economic Order Quantity (EOQ) and a Reorder Point was …

Rebuilding After Disaster - Engineering Lessons From The 2004 Tsunami, Liam Mccarton

Articles

On 26th December 2004 a magnitude 9 earthquake occurred off the west coast of northern Sumatra, Indonesia. The sudden and violent vertical displacement of the sea floor caused a disturbance to the overlying water column, which generated waves (tsunami) that propagated rapidly across the whole of the Indian Ocean. Typically, in open ocean waters, these waves have long wavelengths of the order of 200km and low trough to crest amplitudes. These properties allow them to conserve energy as they propagate over large distances. As the waves enter the shallower waters of coastal areas, their amplitude increases dramatically and their velocity …

One-Pot Enzymatic Synthesis Of Deoxy-Thymidine-Diphosphate (Tdp)-2-Deoxy-∝-D-Glucose Using Phosphomannomutase, Yung-Hum Yang, Young Bok (Abraham) Kang, Dae-Hee Kim, Tek-Hyung Lee, Sung-Hee Park, Kwangwon Lee, Dongwon Yoo, Kwang-Kyung Liou, Hee-Chan Lee, Jae-Kyung Sohng, Byung-Gee Kim

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Production of deoxy-thymidine-diphosphate (TDP)-sugars as substrates of glycosyltransferases, has been one of main hurdles for combinatorial antibiotic biosynthesis, which combines sugar moiety with aglycon of various antibiotics. Here, we report the one-pot enzymatic synthesis of TDP-2-deoxy-glucose employing high efficient TMP kinase (TMK; E.C. 2.7.2.12), acetate kinase (ACK; E.C. 2.7.1.21), and TDP-glucose synthase (TGS; E.C. 2.7.7.24) with phosphomannomutase (PMM; E.C. 5.4.2.8). In this study, replacing phosphoglucomutase (PGM; E.C. 5.4.2) by PMM from Escherichia coli gave four times higher specific activity on 2-deoxy-6-phosphate glucose, suggesting that the activity on 2-deoxy-glucose-6-phosphate was mainly affected by PMM activity, not PGM activity. Using an in …

A New Eclipse-Based Jml Compiler Built Using Ast Merging, Amritam Sarcar, Yoonsik Cheon

Departmental Technical Reports (CS)

The Java Modeling Language (JML) is a formal interface specification language to document the behavior of Java program modules and has been used in many research and industrial projects. However, its inability to support Java 5 features such as generics is reducing its user base significantly. Besides, the JML compiler is on average 8.5 times slower than the javac Java compiler. In this paper, we present a new JML compiler built on the Eclipse Java compiler to support Java 5 features. We used a technique called AST merging to implement coarse-grained incremental compilation. In our experiments we observed a significant …

Nato Human View Architecture And Human Networks, Holly A. H. Handley, Nancy P. Houston

Engineering Management & Systems Engineering Faculty Publications

The NATO Human View is a system architectural viewpoint that focuses on the human as part of a system. Its purpose is to capture the human requirements and to inform on how the human impacts the system design. The viewpoint contains seven static models that include different aspects of the human element, such as roles, tasks, constraints, training and metrics. It also includes a Human Dynamics component to perform simulations of the human system under design. One of the static models, termed Human Networks, focuses on the human-to-human communication patterns that occur as a result of ad hoc or deliberate …

Approximation Of Average Run Length Of Moving Sum Algorithms Using Multivariate Probabilities, Swarnendu Kar, Kishan Mehrotra, Pramod Varshney

Electrical Engineering and Computer Science - All Scholarship

Among the various procedures used to detect potential changes in a stochastic process the moving sum algorithms are very popular due to their intuitive appeal and good statistical performance. One of the important design parameters of a change detection algorithm is the expected interval between false positives, also known as the average run length (ARL). Computation of the ARL usually involves numerical procedures but in some cases it can be approximated using a series involving multivariate probabilities. In this paper, we present an analysis of this series approach by providing sufficient conditions for convergence and derive an error bound. Using …

Prediction Of Wind Speeds With An Artificial Neural Network, Justin Tracy

Electrical Engineering

This project involved designing and programming an artificial neural network, testing its function, and testing the resulting function against existing wind speed measurement data, in order to determine the ability of an artificial neural network to learn the relationship between measured data and future wind speed. The artificial neural network includes gradient momentum, batch training, incremental training, and a function to test the results of the trained neural network against an additional set of data without back propagation. It was first found that the artificial neural network was able perform unsupervised learning, and learn the model for a XOR gate. …

Transmission System Construction And Analysis, Siyuan Wang

Electrical Engineering

In this project we designed and analyzed a simple power system from scratch using Positive Sequence Load Flow (PSLF) and Computer Aided Protection Engineering (CAPE). PSLF is used to solve the balance transmission system. The simulation results from PSLF prove the proposed methodology numerical accuracy. Short circuit duty is simulated using CAPE to find the fault current each bus can have on the system, so engineers can protect the system with the appropriate protection scheme. This project totals two major loads with a combine MW intake of 450 MW. In order to supply multiple loads with constant power, the system …

Three-Dimensional Acceleration Measurement Using Videogrammetry Tracking Data, Jack Leifer, Bryan J. Weems, Sean C. Kienle, Aaron M. Sims

Engineering Faculty Research

In order to evaluate the feasibility of multi-point, non-contact, acceleration measurement, a high-speed, precision videogrammetry system has been assembled from commercially-available components and software. Consisting of three synchronized 640 X 480 pixel monochrome progressive scan CCD cameras each operated at 200 frames per second, this system has the capability to provide surface-wide position-versus-time data that are filtered and twice-differentiated to yield the desired acceleration tracking at multiple points on a moving body. The oscillating motion of targets mounted on the shaft of a modal shaker were tracked, and the accelerations calculated using the videogrammetry data were compared directly to conventional …

An Intriguing Monument, Muiris O'Sullivan, Frank Prendergast, Geraldine Stout

Articles

No abstract provided.

Simulation Of Traffic Loading On Highway Bridges, Bernard Enright

Other resources

This work is based on weigh-in-motion measurements for approximately three million trucks obtained from sites in five European countries. Techniques have been developed, supported by photographic evidence, for filtering the measurements to identify and remove unreliable values, and for the classification of extremely heavy vehicles. The collected measurements have been used as the basis for building and calibrating a Monte Carlo simulation model for bridge loading. Two-lane traffic is simulated – either two lanes in the same direction or one lane in each direction. The model allows for vehicles that are both heavier and have more axles than in the …

Poppleton Creek Wet Detention Pond, Stormwater Academy

BMP Trains Research and Publications

No abstract provided.

Electronic Transport In Chemical Vapor Deposited Graphene Synthesized On Cu: Quantum Hall Effect And Weak Localization, Helin Cao, Qingkai Yu, Luis A. Jauregui, J Tian, W Wu, Z Liu, Ramaneh Jalilian, D K. Benjamin, Z Jiang, J Bao, S S. Pei, Yong P. Chen

Birck and NCN Publications

We report on electronic properties of graphene synthesized by chemical vapor deposition (CVD) on copper then transferred to SiO2/Si. Wafer-scale (up to 4 in.) graphene films have been synthesized, consisting dominantly of monolayer graphene as indicated by spectroscopic Raman mapping. Low temperature transport measurements are performed on microdevices fabricated from such CVD graphene, displaying ambipolar field effect (with on/off ratio similar to 5 and carrier mobilities up to similar to 3000 cm(2)/V s) and "half-integer" quantum Hall effect, a hall-mark of intrinsic electronic properties of monolayer graphene. We also observe weak localization and extract information about phase coherence and scattering …

Note: Thermal Analog To Atomic Force Microscopy Force-Displacement Measurements For Nanoscale Interfacial Contact Resistance, Brian D. Iverson, John Blendell, Suresh Garimella

Birck and NCN Publications

Thermal diffusion measurements on polymethylmethacrylate-coated Si substrates using heated atomic force microscopy tips were performed to determine the contact resistance between an organic thin film and Si. The measurement methodology presented demonstrates how the thermal contrast signal obtained during a force-displacement ramp is used to quantify the resistance to heat transfer through an internal interface. The results also delineate the interrogation thickness beyond which thermal diffusion in the organic thin film is not affected appreciably by the underlying substrate.

A Continuum Plasticity Model That Accounts For Hardening And Size Effects In Thin Films, Abigail Hunter, Hariharanath Kavuri, Marisol Koslowski

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

We conducted three-dimensional finite element simulations of the mechanical response of passivated single crystal copper thin films with a continuum crystal plasticity model. The model introduces the formation of high density dislocation layers close to the substrate and passivation interfaces obtained from dislocation dynamics simulations. These dislocation structures are responsible for an increase in strain hardening as the film thickness decreases. The model predicts an increase in strain hardening as the film thickness decreases in agreement with experimental observation in films with thickness in the range 0.2 to 2μm.