Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

2010

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 301 - 330 of 5373

Full-Text Articles in Engineering

Design And Implementation Of An Actively Adjustable Spring Mechanism Via Redundant Actuation, Eleazar Marquez Dec 2010

Design And Implementation Of An Actively Adjustable Spring Mechanism Via Redundant Actuation, Eleazar Marquez

Theses and Dissertations - UTB/UTPA

This study presents the theoretical results and experimental validation of an adjustable stiffness mechanism. The use of redundant actuation is emphasized in the design of a one-degree-of-freedom Watt II mechanism capable of independently controlling the effective stiffness without a change in equilibrium position. This approach is in contrast to previous spring mechanism designs unable to actively control the spring rate independent of deflection, and has potential applications in various types of suspension and assembly systems. Results indicate that driving the redundantly actuated, unidirectional, spring mechanism requires attaching two direct brush-type direct current motors on each of the two grounded revolute …


A Study Of The Effect Of Vibration On Railroad Bearing Temperature, Bertha Alicia Gonzalez Dec 2010

A Study Of The Effect Of Vibration On Railroad Bearing Temperature, Bertha Alicia Gonzalez

Theses and Dissertations - UTB/UTPA

An on-track collaborative field test and laboratory experiments were conducted in order to determine the relationship between abrupt rises in surface temperature of a railroad bearing and vibration signatures captured during the experiments. The collaborative field test was conducted in order to investigate the root cause for this abrupt temperature change known as bearing temperature trending. The research presented in this thesis will show that temperature trending is correlated to an increase in the magnitude of vibration within the bearing and the fundamental frequencies that are generated by the internal components of a rotating bearing assembly. Distinct vibration mechanisms are …


Photolithographic Fabrication Of 3d Penrose-Like Quasi-Photonic Crystal Polymeric Templates Utilizing Lab-Made Phasemask, Faraon Torres-Lazos Dec 2010

Photolithographic Fabrication Of 3d Penrose-Like Quasi-Photonic Crystal Polymeric Templates Utilizing Lab-Made Phasemask, Faraon Torres-Lazos

Theses and Dissertations - UTB/UTPA

Photonic crystals (PhC) have recently become of great interest because of their potential as replacement of electronics and/or supplement to semiconductors technology. The PhC’s capability to make compact integrated optical circuits has already made possible the laboratory manufacture of an array of different types of optical waveguides, cavities and filters. The work presented here aimed to simultaneously fabricate a 3D-PhC templates employing six-beam holographic lithography. The basic procedures included recording gratings using interference field of laser sources in a photoresist coating on a glass substrate. The manufacturing method utilized only one optical element, a phasemask, drastically reducing the complexity of …


Photonic Crystal Design And Fabrication Assisted By Tunable Femtosecond Oscillator Laser, Kristofer B. Ohlinger Dec 2010

Photonic Crystal Design And Fabrication Assisted By Tunable Femtosecond Oscillator Laser, Kristofer B. Ohlinger

Theses and Dissertations - UTB/UTPA

Photonic Crystals have the potential for engineered light interaction as directed by the photonic bandgap, a property that details the prohibited propagation region and ultimately the ability to guide light. A so called, photonics-on-chip, would incorporate arbitrary light guiding with functional elements in one package. The realization of such a device is subject to the fabrication paradigms implemented and this thesis is concerned with holographic lithography as a means for creating polymer photonics crystal templates and two-photon polymerization for incorporating light guiding pathways.

In this thesis, the design of the to-be-fabricated structures has been co-opted by computational exploration of the …


Winslow Elliptic Smoothing Equations Extended To Apply To General Regions Of An Unstructured Mesh, James Steven Masters Dec 2010

Winslow Elliptic Smoothing Equations Extended To Apply To General Regions Of An Unstructured Mesh, James Steven Masters

Masters Theses and Doctoral Dissertations

In any engineering endeavor, it is important to have the ability to efficiently and intelligently break up a region of interest in order to explore and investigate the interesting and dynamic aspects of the system enclosed in the region. In the field of fluid mechanics - and, in particular, computational fluid dynamics - this region breakup (known as discretization) has traditionally been done using structured meshes but, because of their flexibility with capturing real-world geometry, unstructured meshes are being increasingly utilized. Not surprisingly, techniques that have traditionally been reserved for structured meshes are migrating to the world of unstructured meshing …


Global Positioning System, Vladimir Villalba Dec 2010

Global Positioning System, Vladimir Villalba

Electrical Engineering

The Global Positioning System (GPS) is a navigation network consisting of 24 satellites in orbit around the Earth. This satellite system provides the accurate position of an individual in all weather conditions at all times around the world. Individuals can use GPS receivers to locate where they are, pinpoint where they want to go with any form of transportation.

The senior project embarks in a path to understand the workings of the GPS satellite system. To accomplish this task, the concepts learned in Electrical Engineering will be implemented. This report encompasses the design process and steps taken in prototyping a …


Analyzing The Impact Of Reactive Transport On The Repository Performance Of Triso Fuel, Gregory Schmidt Dec 2010

Analyzing The Impact Of Reactive Transport On The Repository Performance Of Triso Fuel, Gregory Schmidt

UNLV Theses, Dissertations, Professional Papers, and Capstones

One of the largest determiners of the amount of electricity generated by current nuclear reactors is the efficiency of the thermodynamic cycle used for power generation. Current light water reactors (LWR) have an efficiency of 35% or less for the conversion of heat energy generated by the reactor to electrical energy. If this efficiency could be improved, more power could be generated from equivalent volumes of nuclear fuel. One method of improving this efficiency is to use a coolant flow that operates at a much higher temperature for electricity production. A reactor design that is currently proposed to take advantage …


Self-Stabilizing Leader Election In Dynamic Networks, Hema Piniganti Dec 2010

Self-Stabilizing Leader Election In Dynamic Networks, Hema Piniganti

UNLV Theses, Dissertations, Professional Papers, and Capstones

The leader election problem is one of the fundamental problems in distributed computing. It has applications in almost every domain. In dynamic networks, topology is expected to change frequently. An algorithm A is self-stabilizing if, starting from a completely arbitrary configuration, the network will eventually reach a legitimate configuration.

Note that any self-stabilizing algorithm for the leader election problem is also an algorithm for the dynamic leader election problem, since when the topology of the network changes, we can consider that the algorithm is starting over again from an arbitrary state. There are a number of such algorithms in the …


Computational Analysis For Improved Design Of An Sae Baja Frame Structure, Nagurbabu Noorbhasha Dec 2010

Computational Analysis For Improved Design Of An Sae Baja Frame Structure, Nagurbabu Noorbhasha

UNLV Theses, Dissertations, Professional Papers, and Capstones

Baja SAE is an intercollegiate competition to design, fabricate, and race a small, single passenger, off-road vehicle powered by a 10 HP Briggs & Stratton 4-Stroke gasoline engine. All Baja SAE vehicles for the competition are powered by a small engine, thus large part of vehicle performance depends on the acceleration and maneuverability of the vehicle which is proportional to the weight of the chassis and rollcage. As weight is critical to achieve the greater performance of the vehicle, a balance must be found between the strength and weight of the rollcage to ensure the safety of the driver.


The …


Synthesis, Characterization And Simulation Of Optical And Raman Properties Of Metal Nanoparticles, Sriteja Yamparala Dec 2010

Synthesis, Characterization And Simulation Of Optical And Raman Properties Of Metal Nanoparticles, Sriteja Yamparala

UNLV Theses, Dissertations, Professional Papers, and Capstones

Metal nanoparticles are of strong interest for their unusual optical and Raman properties with potential for new and improved device applications. Specifically, the significantly enhanced Raman Scattering enabled by Surface Plasmon Resonance on metal nanoparticles open up the potential for the implementation of very sensitive sensors. It has been demonstrated that Surface Plasmon resonance can be used for the detection of a single molecule. Out of the various metal nanoparticles that have been investigated, the most promising are that made of gold and silver. Metal nananoparticles of gold and silver show strong Raman enhancement in the visible spectral region, making …


Analysis And Evaluation Of Safety Impacts Of Median Types And Midblock Left Turn Treatments For Urban Arterials, Timur Mauga Dec 2010

Analysis And Evaluation Of Safety Impacts Of Median Types And Midblock Left Turn Treatments For Urban Arterials, Timur Mauga

UNLV Theses, Dissertations, Professional Papers, and Capstones

Urban growth leads to new land-uses abutting arterials requiring driveways for their accessibility. Uncontrolled number and locations of such access points causes safety, mobility and accessibility problems. The solution to these problems is access management (AM) which controls the number and location of the access points. AM techniques are normally documented in the form of guidelines for engineers and planners to follow when implementing the techniques. However, AM guidelines may not cover every technique due to the fact that AM is still growing. For example, the current AM guideline prepared by The Nevada Department of Transportation addresses many AM techniques. …


Self-Stabilizing Group Membership Protocol, Mahesh Subedi Dec 2010

Self-Stabilizing Group Membership Protocol, Mahesh Subedi

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this thesis, we consider the problem of partitioning a network into groups of bounded diameter.

Given a network of processes X and a constant D, the group partition problem is the problem of finding a D-partition of X, that is, a partition of X into disjoint connected subgraphs, which we call groups, each of diameter no greater than D. The minimal group partition problem is to find a D-partition {G1, ... Gm} of X such that no two groups can be combined; that is, for any Gi and Gj, where i ≠ j, either Gi U Gj is disconnected …


Effect Of Spatial And Temporal Variability Of Antecedent Moisture Content On Model-Generated Runoff From An Arid Watershed, William J. Meyer Dec 2010

Effect Of Spatial And Temporal Variability Of Antecedent Moisture Content On Model-Generated Runoff From An Arid Watershed, William J. Meyer

UNLV Theses, Dissertations, Professional Papers, and Capstones

Streams in the arid southwest are typically ephemeral, and stream gages are not commonly available. Consequently, runoff data from storm events is not available, and flood control facility design or other water resource related decisions are based on synthetic hydrographs. In the Mojave Desert region of Southern Nevada, the duration of storm used to develop these synthetic hydrographs is the 6 hour storm. The 6 hour storm is used to simulate high intensity summer storms. Additionally, soils information used in the calculations for these synthetic hydrographs is taken from maps that are generally developed for a broad range of issues …


Axisymmetric Finite Element Modeling For The Design And Analysis Of Cylindrical Adhesive Joints Based On Dimensional Stability, Paul E. Lyon Dec 2010

Axisymmetric Finite Element Modeling For The Design And Analysis Of Cylindrical Adhesive Joints Based On Dimensional Stability, Paul E. Lyon

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The use and implementation of adhesive joints for space structures is necessary for incorporating fiber-reinforced composite materials. Correct modeling and design of cylindrical adhesive joints can increase the dimensional stability of space structures. The few analytical models for cylindrical adhesive joints do not fully describe the displacement or stress field of the joint.

A two-dimensional axisymmetric finite element model for the design and analysis of adhesive joints was developed. The model was developed solely for the analysis of cylindrical adhesive joints, but the energy techniques used to develop the model can be applied to other types of joints as well. …


Retrieval Of Aerosol Mass Concentration From Elastic Lidar Data, Christian C. Marchant Dec 2010

Retrieval Of Aerosol Mass Concentration From Elastic Lidar Data, Christian C. Marchant

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Agricultural aerosol sources can contribute significantly to air pollution in many regions of the country. Characterization of the aerosol emissions of agricultural operations is required to establish a scientific basis for crafting regulations concerning agricultural aerosols. A new lidar instrument for measuring aerosol emissions is described, as well as two new algorithms for converting lidar measurements into aerosol concentration data. The average daily aerosol emission rate is estimated from a dairy using lidar.

The Aglite Lidar is a portable scanning lidar for mapping the concentration of particulate matter from agricultural and other sources. The instrument is described and performance and …


Dynamic Testing, Finite Element Modeling, And Long-Term Instrumentation Of A Box Girder Post-Tensioned Bridge For The Long-Term Bridge Performance Program, Timothy Paul Thurgood Dec 2010

Dynamic Testing, Finite Element Modeling, And Long-Term Instrumentation Of A Box Girder Post-Tensioned Bridge For The Long-Term Bridge Performance Program, Timothy Paul Thurgood

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

As part of the Long-Term Bridge Performance (LTBP) program, a flagship research program funded by the Federal Highway Administration in response to the aging bridge network, the Lambert Road Bridge near Elk Grove California was selected as the California Pilot bridge set to undergo non-destructive testing and monitoring. The purpose of the program is to obtain a database of scientific quality data concerning the health and maintenance procedures currently in use across the nation. FHWA program managers along with members of the Utah State University LTBP research team selected the bridge with the assistance of the National Bridge index and …


Incorporating Spatial Information Into Gas Plume Detection In Hyperspectral Imagery, Cameron S. Grant Dec 2010

Incorporating Spatial Information Into Gas Plume Detection In Hyperspectral Imagery, Cameron S. Grant

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Detection of chemical plumes in hyperspectral data is a problem having solutions that focus on spectral information. These solutions neglect the presence of the spatial information in the scene. The spatial information is exploited in this work by assignment of prior probabilities to neighborhood configurations of signal presence or absence. These probabilities are leveraged in a total probability approach to testing for signal presence in a pixel of interest. The two new algorithms developed are named spatial information detection enhancement (SIDE) and bolt-on SIDE (B-SIDE). The results are explored in comparison to the clutter matched filter (CMF), a standard spectral …


Triso Fuel Compact Thermal Conductivity Measurement Instrument Development, Colby Jensen Dec 2010

Triso Fuel Compact Thermal Conductivity Measurement Instrument Development, Colby Jensen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Thermal conductivity is an important thermophysical property needed for effectively predicting fuel performance. As part of the Next Generation Nuclear Plant (NGNP) program, the thermal conductivity of tri-isotropic (TRISO) fuel needs to be measured over a temperature range characteristic of its usage. The composite nature of TRISO fuel requires that measurement be performed over the entire length of the compact in a non-destructive manner. No existing measurement system is capable of performing such a measurement.

A measurement system has been designed based on the steady-state, guarded-comparative-longitudinal heat flow technique. The system as currently designed is capable of measuring cylindrical samples …


Destructive Testing Of Composite Precast Concrete Deck Panels And Built-Up Steel Plate Girders, Wesley J. Cook Dec 2010

Destructive Testing Of Composite Precast Concrete Deck Panels And Built-Up Steel Plate Girders, Wesley J. Cook

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Utah Department of Transportation (UDOT) has implemented the use of precast concrete panels for bridge deck construction. A bridge utilizing these panels as a reconstruction method was decommissioned three years after the new deck installation, due to unrelated matters. Two sections of this bridge were salvaged and sent to Utah State University (USU) for destructive testing.

Each bridge section consisted of two built-up steel plate girders intact with the precast concrete deck panels. The precast panels were designed and constructed to achieve full composite action between the deck and built-up steel plate girders through the use of Nelson shear …


Improving Ensemble Streamflow Prediction Using Interdecadal/Interannual Climate Variability, Kenneth W. Lamb Dec 2010

Improving Ensemble Streamflow Prediction Using Interdecadal/Interannual Climate Variability, Kenneth W. Lamb

UNLV Theses, Dissertations, Professional Papers, and Capstones

The National Weather Service’s (NWS) river forecast centers provide long-term water resource forecasts for the main river basins in the U.S. The NWS creates seasonal streamflow forecasts using an ensemble prediction model called the Extended Streamflow Prediction (ESP) software. ESP creates runoff volume forecasts by taking the current observed soil moisture and snowpack conditions in the basin and applying them to historical temperature and precipitation scenarios. The ESP treats every historic input year as a likely scenario of future basin conditions. Therefore improving the knowledge about how long-term climate cycles impact streamflow can extend the forecast lead time and improve …


Safety Evaluation Of Work Zone Practices In Utah, Tomás Ernesto Lindheimer Dec 2010

Safety Evaluation Of Work Zone Practices In Utah, Tomás Ernesto Lindheimer

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Work zones present a risk to drivers and to personnel constructing the roadway. In 2005 work zones accounted for 2.5% of fatalities nationwide, 3.5% for the state of Utah. The goal of this research is to make work zones safer by quantifying the risk that they present to drivers. The approach of this research has been to review part 6 of the Manual of Uniform Traffic Control Devices (MUTCD) and compare the differences from the 2003 and 2009 editions, conduct field studies of Utah work zones, and develop a tool for measuring risk in work zones. In the 2009 MUTCD …


Modeling The Random Component Of Manufacturing Yield Of Integrated Circuits., David L. Farnsworth, Michael E. Long Dec 2010

Modeling The Random Component Of Manufacturing Yield Of Integrated Circuits., David L. Farnsworth, Michael E. Long

Articles

A model is created for the number of integrated circuits that are good from each wafer on which they are fabricated. The goal is to separate the random or common cause loss from the systematic or special loss. The random loss from this type of process is modeled so that false alarms indicating systematic loss are less likely to occur and so that the structure of the systematic loss can be determined.


An Investigation Of Carrier Transport In Hafnium Oxide/Silicon Dioxide Mos Gate Dielectric Stacks From 5.6-400k, Richard G. Southwick Iii Dec 2010

An Investigation Of Carrier Transport In Hafnium Oxide/Silicon Dioxide Mos Gate Dielectric Stacks From 5.6-400k, Richard G. Southwick Iii

Boise State University Theses and Dissertations

Hafnium oxide (HfO2) is replacing silicon dioxide (SiO2) as the gate dielectric in metal oxide semiconductor (MOS) structures driven mainly by need to reduce high leakage currents observed in sub-2nm SiO2. The high dielectric constant of HfO2 (~25) compared to SiO2 (3.9 bulk) allows a thicker HfO2 layer to be used in place of the thinner SiO2 layer thereby reducing the gate leakage current in MOS devices while maintaining the same capacitive coupling provided by the thinner SiO2. However, incorporating HfO2 into MOS devices produces a SiO …


Pharmaceuticals And Personal Care Products In Ground Water From Municipal Lagoon Treatment, Teresa Nicholas Dec 2010

Pharmaceuticals And Personal Care Products In Ground Water From Municipal Lagoon Treatment, Teresa Nicholas

Boise State University Theses and Dissertations

Pharmaceuticals and personal care products (PPCPs) are biologically active, organic chemicals that are introduced into the environment through wastewater streams. These chemicals are being found in the environment in trace concentrations and are of concern due to their unknown potential for harm to the health and welfare of the environment. The hypothesis is that during the course of wastewater treatment in a municipal lagoon system from a small community, PPCPs are seeping into ground water resulting in chronic low exposure in the environment. The objective of this work was to study a specific wastewater lagoon treatment system in Mountain Home, …


Degradation Specific Ocr, Subramaniam Venkatraman Dec 2010

Degradation Specific Ocr, Subramaniam Venkatraman

Boise State University Theses and Dissertations

Optical Character Recognition (OCR) is the mechanical or electronic translation of scanned images of handwritten, typewritten, or printed text into machine-encoded text. OCR has many applications, such as enabling a text document in a physical form to be editable, or enabling computer searching on a computer of a text that was initially in printed form. OCR engines are widely used to digitize text documents so that they can be digitally stored for remote access, mainly for websites. This facilitates the availability of these invaluable resources instantly, no matter the geographical location of the end user. Huge OCR misclassification errors can …


Auto Dialer Wireless Smoke Detector/Alarm System, Manny Linhares Dec 2010

Auto Dialer Wireless Smoke Detector/Alarm System, Manny Linhares

Electrical Engineering

Smoke Detectors/Alarms save the lives of over sixty percent of people each year in the United States. Most of the existing homes are still fitted with the normal smoke detectors either running out of the 120V ac wiring or out of a 9V dc battery. These alarms are perfectly fine to alert residents if there is a fire while they are home. But for people who are away from home when a fire occurs, it would be nice if they could be alerted automatically of such an occurrence and therefore be able to act upon the event by either calling …


A Comparative Study Of Diversity In Evolutionary Algorithms, Jayakanth Jayachandran, Steven Corns Dec 2010

A Comparative Study Of Diversity In Evolutionary Algorithms, Jayakanth Jayachandran, Steven Corns

Engineering Management and Systems Engineering Faculty Research & Creative Works

For many evolutionary algorithms a key obstacle to finding the global optima is insufficient solution diversity, causing the algorithm to become mired in a local optimum. Solution diversity can be influenced by algorithm parameters including population size, mutation operator and diversity preservation techniques. This study examines the combined effect of population size, mutation value and the geography imposed by the combinatorial graphs on a set of five standard evolutionary algorithm problems. a tradeoff can be seen between the initial diversity of the population size, introduction of new diversity from mutation, and the preservation of diversity from combinatorial graph. with an …


College Of Engineering Senior Design Competition Fall 2010, University Of Nevada, Las Vegas Dec 2010

College Of Engineering Senior Design Competition Fall 2010, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …


Model-Based Analysis Of Electric Drive Options For Medium-Duty Parcel Delivery Vehicles, Robb A. Barnitt, Aaron D. Brooker, Laurie Ramroth Dec 2010

Model-Based Analysis Of Electric Drive Options For Medium-Duty Parcel Delivery Vehicles, Robb A. Barnitt, Aaron D. Brooker, Laurie Ramroth

Publications (T)

Medium-duty vehicles are used in a broad array of fleet applications, including parcel delivery. These vehicles are excellent candidates for electric drive applications due to their transient-intensive duty cycles, operation in densely populated areas, and relatively high fuel consumption and emissions. The National Renewable Energy Laboratory (NREL) conducted a robust assessment of parcel delivery routes and completed a model-based techno-economic analysis of hybrid electric vehicle (HEV) and plug-in hybrid electric vehicle (PHEV) configurations. First, NREL characterized parcel delivery vehicle usage patterns, most notably daily distance driven and drive-cycle intensity. Second, drive-cycle analysis results framed the selection of drive cycles used …


Mobility Aid: A Dual Purpose Walker And Scooter, Zack Blois, Robia Choi, Kristin Dills Dec 2010

Mobility Aid: A Dual Purpose Walker And Scooter, Zack Blois, Robia Choi, Kristin Dills

Mechanical Engineering

The Mobility Aid project was proposed by Theresa Mortilla and Idee Shapiro. The goal of the project was to design and build a device that can quickly and easily transform between a mobility walker and an electric scooter to allow for more freedom of mobility. The inspiration for this project arose from the fact that Theresa suffers from multiple sclerosis in her legs and can only walk for about thirty minutes at a time until she gets too fatigued and must sit down and rest. This device would provide her with the ability to continue moving while giving her legs …