Engineering Commons^™

Side-By-Side Testing Of Water Heating Systems Results From 2009-2010 Testing, Florida Solar Energy Center, Carlos Colon

FSEC Energy Research Center®

The Hot Water System (HWS) Laboratory test facility at the Florida Solar Energy Center (FSEC) in Cocoa, FL was used for testing seven differing types of residential water heating systems. The HWS building provides unconditioned housing (similar to a garage in Florida) for one reference electric 50-gallon heater, three solar thermal electric assisted systems, one electric tankless system, one reference 40-gallon natural gas (NG) and tankless gas system. The performance of all seven systems has been compared in a side-by-side test configuration over a full year period. Simultaneous hot water draws take place for all hot water heating systems on …

The Characterization And Analysis Of In-Vitro And Elevated Temperature Repassivation Of Ti-6al-4v Via Afm Techniques, Aaron J. Guerrero

Master's Theses

ABSTRACT

The Characterization and Analysis of In-vitro and Elevated Temperature Repassivation of

Ti-6Al-4V via AFM Techniques

Aaron J Guerrero

Research in the corrosion of orthopaedic implants is a growing research field where implants have been known to show adverse effects in patients who have encountered the unfortunate dissolution of their implants due to corrosion. Once corrosion begins within the body, many adverse biological reactions can occur such as late on-set infections resulting in severe health complications. The focus of this research is specifically related to the problem of late on-set infections caused by localized corrosion of orthopaedic implants. In medical …

Minimum Description Length (Mdl) Principle As A Possible Approach To Arc Detection, Jan Beck, David Nemir, Vladik Kreinovich

Departmental Technical Reports (CS)

Detecting arcing faults is an important but difficult-to-solve practical problem. In this paper, we show how the Minimum Description Length (MDL) Principle can help in solving this problem.

Optimal Prices In The Presence Of Discounts: A New Economic Application Of Choquet Integrals, Hung T. Nguyen, Vladik Kreinovich

Departmental Technical Reports (CS)

In many real-life situations, there are ``package deals'', when customers who buy two or more different items get a special discount. For example, when planning a trip, a deal including airfare and hotel costs less than the airfare and hotel on their own; there are often also special deals when we combine airfare with car rental, and deals that cover all three items plus tickets to local tourist attractions, etc.

Usually, there are several such deals with different combinations and different discounts. What if we plan to buy several different copies of each item: e.g., we plan a group tour …

Spatial Resolution For Processing Seismic Data: Type-2 Methods For Finding The Relevant Granular Structure, Vladik Kreinovich, Jaime Nava, Rodrigo Romero, Julio Olaya, Aaron A. Velasco, Kate C. Miller

Departmental Technical Reports (CS)

One of the main methods of determining the Earth structure is the analysis of the seismic data. Based on the seismic data, we produce a 3-D map describing the density at different locations on different depths. Due to incomplete coverage and measurement uncertainty, this map provides only an approximate description of the actual density distribution. For example, based on the seismic data, it is impossible to distinguish between the densities at two nearby points. In other words, what we actually reconstruct is not a function of 3 variables, but rather values determined on the appropriate spatial granules. Because of this …

How To Describe Spatial Resolution: An Approach Similar To The Central Limit Theorem, Omar Ochoa, Martine Ceberio, Vladik Kreinovich

Departmental Technical Reports (CS)

For spatially distributed quantities v(x), there are two main reasons why the measured value is different from the actual value. First, the sensors are imprecise, so the measured value is slightly different from the actual one. Second, sensors have a finite {\it spatial resolution}: they do not simply measure the value at a single point, they are "blurred", i.e., affected by the values of the nearby points as well. It is known that uncertainty can be often described by the Gaussian distribution. This possibility comes from the Central Limit Theorem, according to which the sum of many independent small measurement …

Toward Computing An Optimal Trajectory For An Environment-Oriented Unmanned Aerial Vehicle (Uav) Under Uncertainty, Jerald Brady, Octavio Lerma, Vladik Kreinovich, Craig Tweedie

Departmental Technical Reports (CS)

Over the past decade a few but increasing number of researchers have begun using Unmanned Aerial Vehicles (UAVs) to expand and improve upon existing remote sensing capabilities in the Arctic. Due to the limited flight time, it is important to make sure that the UAV follows an optimal trajectory -- in which it cover all the points from a given area within the smallest possible trajectory length. Under the usual assumptions that we cover a rectangular area and that each on-board sensor covers all the points with a given radius r, we describe the optimal trajectory. A more complex optimal …

Reconode: Towards An Autonomous Multi-Robot Team Agent For Usar, Kang Li

Electronic Theses and Dissertations

Urban search and rescue (USAR) robots can benefit from small size as it facilitates movement in cramped quarters. Yet, small size limits actuator power, sensor payloads, computational capacity and battery life. We are alleviating these issues by developing the hardware and software infrastructure for high performance, heterogeneous, dynamically-reconfigurable miniature USAR robots, as well as a host of other relevant applications. In this thesis, a generic modular embedded system architecture based on the RecoNode multiprocessor is proposed, which consists of a set of hardware and software modules that can be configured to construct various types of robot systems for dynamic and …

Improved Computational And Experimental Validation Using Different Turbulence Models, Jay Marcos, David D. Marshall

Aerospace Engineering

This paper will explore the methods and techniques necessary to perform a more accurate CFD validation of experimental results. The methods and techniques used will be validated against experimental wind tunnel data of a 2D high lift airfoil with a 3D engine performed by Georgia Tech Research Institute. Preliminary results showed that computational methods over predict the lift and drag coefficient, while still showing very similar trends in CL and CD. To further improve the preliminary results and the predictive capabilities, different turbulence models will be investigated. Results of this validation will assist in determining the appropriate turbulence models, boundary …

Development And Assessment Of A Pcb Layout And Manufacturong Laboratory Module In Introductory Electric Circuits For Ee And Non-Ee Majors, Albert Liddicoat, Jianbiao Pan, James G. Harris, Gary Perks, Linda Shepherd

Industrial and Manufacturing Engineering

In standard introductory electric circuits laboratories for electrical engineering (EE) majors and non-EE majors, prototype boards are typically used to construct and test electric circuits. Students typically do not learn how to design and manufacture Printed Circuit Boards (PCB) that are commonly used in more sophisticated design projects and other engineering applications. This paper will present the development and assessment of a PCB layout and manufacturing laboratory module that has been used in introductory electric circuits laboratories for EE and non-EE majors. The feasibility of integrating the new PCB layout and manufacturing module into the electric circuit course will be …

Assessing Curriculum Improvement Through Senior Projects, Jianbiao Pan, Albert Liddicoat, James G. Harris, Linda Shepherd

Industrial and Manufacturing Engineering

Senior project and/or capstone design courses are intended to provide a culminating design experience for students and to demonstrate their understanding of engineering knowledge and their ability to apply that knowledge to practical problems. It is expected that the quality and attributes of students’ senior design projects can be used as a good measure of determining how well the curriculum prepares students to engage in engineering design as well as a measure of faculty teaching and student learning. This paper reports the results of a study designed to assess whether the new computer engineering curriculum implemented at Cal Poly over …

Analysis Of Curvature Effects On Boundary Layer Separation And Turbulence Model Accuracy For Circulation Control Applications, Daniel Wilde

Aerospace Engineering

This set of analyses involves flow separation in high curvature regions with special attention to circulation control implementations. Blown flaps of various shapes designed by Rory Golden for use on the AMELIA, or Advanced Model for Extreme Lift and Improved Aeroacoustics, short takeoff vehicle have exhibited flow separation at locations where flap curvature changes. Investigating this problem, its causes, and potential solutions, I have concluded that the separation is equally a function of the flow simulation turbulence model used, and the geometry of the flap itself. Using Gambit version 11.0.1 for grid generation and Fluent version 6.3.26 for CFD calculations, …

Thermodynamic Optimisation Of The Otto / Stirling Combined Cycle, Barry Cullen, Michel Feidt, Jim Mcgovern, Stoian Petrescu

Conference Papers

Combined cycle systems are an established method for increasing primary energy efficiency of power generation systems. Some ongoing research is concerned with investigating the novel combined cycle system involving the Otto and Stirling thermodynamic cycles. The Otto cycle is to act as the topping cycle, with the Stirling cycle acting to recover heat from the exhaust for the purpose of additional power generation. The present work investigates the thermodynamic optimisation of the combined cycle system for the case of the engines operating under two imposed parametric constraints: 1) imposed heat addition to the Otto cycle, and 2) imposed maximum cycle …

High Performance Modified Dsr Routing Protocol For Wlan Mesh Networks, Mustafa Ramadhan, Mark Davis

Conference papers

This work presents a cross-layer modification to the DSR protocol which discovers high throughput paths on multi-hop wireless mesh networks. The modified DSR incorporates a metric based upon the bandwidth availability at a node into the routing discovery mechanism. We introduce the Access Efficiency Factor (AEF) as an alternative metric to the hop-count for the routing selection mechanism. In this modification, the selected path is identified by finding a path with the highest minimum AEF value. The OPNET modeler has been employed to investigate the performance of the modified DSR protocol on randomly generated network opologies of different node densities. …

Project Selection And Process Plan Design For Alternative Ime 143/144 Final Project, Joseph S. Anderson, Sarah R. Shackelford

Industrial and Manufacturing Engineering

Hundreds of students each year enroll in IME 143 or IME 144, freshman-level machining classes, and complete an air motor to demonstrate the skills they have acquired on a variety of manufacturing processes. The air motor, however is useful only as a teaching tool in the classroom; once the students bring them home, the air motor becomes little more than a trophy at best.

With the capabilities of the machining lab, a final project can be developed that can have a benefit to people in need while maintaining educational value. This project details a process plan for a manual water …

Increasing Production Capacity At A Start Up Biomedical Company, Traci J. Otsuji

Industrial and Manufacturing Engineering

The following senior project was first introduced during a summer internship at a biomedical company called Asthmatx Inc. Asthmatx is responsible for the development and manufacturing of a catheter‐based device for moderate to severe cases of asthma. Upon the approval of FDA, Asthmatx had planned to ramp up their production capacity significantly in order to accommodate the potential growth.

The first step in the process improvement was a facility reconfiguration that involved the adjustment of process sequencing and the implementation of ergonomic catheter channels. Next, time studies were conducted to gain more accurate time standards of the production process. After …

Process Improvement For The Department Of Surgery Sierra Vista Medical Center, Jessica Paz

Industrial and Manufacturing Engineering

This report proposes and analyzes process improvement methods for the Surgical Services Department at Sierra Vista Regional Medical Center. The department currently operates with an average of 25% of elective cases starting on time. This can be attributed to a number of inefficiencies that occur throughout the hospital.

The following Industrial Engineering methods were utilized to improve patient flow:  creation of a data collection system to quantify delays  use of simulation and facility redesign techniques to determine feasibility and benefits of moving towards a surgical center model  development of a user interfaced database to record and analyze …

Police Operations Simulation, Robert Mcgee

Industrial and Manufacturing Engineering

In this report, the author explains the process of creating the Police Operations Simulation, shows step-by-step how it works, and statistically analyzes the results from SLOPD’s own proposed and current schedules. The data-gathering from the department and the simulation itself will receive the bulk of the coverage in this report, followed by sample results from SLOPD and a business plan for future sale to other departments.

Using the given numbers, it appears that the proposed schedule will result in significantly improved coverage for the city of San Luis Obispo. While any increase in the number officers on patrol tends to …

Hybrid Rocket Motor, Zach Arena, Alexander Athougies, Alden Rodulfo

Aerospace Engineering

This project involves the re-design, manufacturing, and testing of the Cal Poly Space System’s 4th iteration of an M-class 98mm hybrid rocket motor. This motor utilizes hydroxyl-terminated polybutadiene as fuel with liquid nitrous oxide as the oxidizer. Modeling and analysis was conducted on a 12 port self-impinging swirl injector and fuel manufacturing to improve performance. Several hot and cold flow tests were conducted to validate the analysis and predict performance values. Test results included two test fires resulting in an average of 212 lbf of thrust for 6 seconds with an Isp of 160 seconds and an average thrust of …

Mapping The Medical Device Development Process, Scott T. Ham

Industrial Technology and Packaging

This project examined the use of process mapping as a tool to show the process of developing medical devices from a broad perspective that includes research, innovation, development, regulation, and marketing. The medical device development cycle, on a broad scope, is not well defined. The lack of a universal language with which to describe this process has made it difficult to understand and communicate. In this project, data was collected from peer-reviewed sources, summarized in a literature review, drawn out by hand into a series of lower-level process maps and finally assembled into a single process map. This project is …

Maintenance Service Request Process Optimization For The Cliffs Resort At Shell Beach, John Birch

Industrial and Manufacturing Engineering

This process optimization project utilizes a new idea to have an Access 2007 database automatically send a text message to a given cellular telephone. The hotel’s maintenance service request process is outdated and inefficient, relying solely on paper and human memory for success. Initiation, tracking, and recording the maintenance service requests need to be automated to optimize this process. The solution is a working database which employs said automation using Access 2007 in combination with a separate program created to facilitate the automatic text messaging. Implementing this database will result in higher customer satisfaction for the hotel.

Ground Support Equipment For Northrop Grumman Massive Heat Transfer Experiment, Michael A. Manuel, Christopher J. Sparber, Greg A. Trent

Aerospace Engineering

California Polytechnic State University students designed, built, and certified ground support equipment for the Northrop Grumman Massive Heat Transfer Experiment. The Cal Poly design team built the 10000, 20000, and 30000 assemblies to meet Northrop Grumman requirements. The requirements included interface limitations, design load factors, delivery, and testing specifications. The design process consists of requirements generation, conceptual design, preliminary design, design reviews, manufacturing, and certification. The hardware was successfully completed and is used at the Johnson Space and Kennedy Space Center.

Senior Project: Global Position Determination From Observed Relative Position Of Celestial Bodies, Michael Holmes

Aerospace Engineering

A method was developed to determine the latitude and longitude of an observer based on the observed position of the Moon and several other celestial bodies. The basic principal developed dealt with the proximity of the Moon. Its relative displacement from calculated values was measured using photography by comparison with stars near the Moon. Photographs were taken from a location in San Luis Obispo at Longitude 120°35.9' and Latitude 35°13.3'. The analysis method has determined the location of the observer to a Longitude of 117°43.8'. An additional method located the observer to 36°38.7'N Latitude and 114°47.6'W Longitude.

Conceptual Aircraft Hinge Moment Measurement System, Erin M. Hambrick, Nicole M. Thomason

Aerospace Engineering

The Conceptual Aircraft Hinge Moment Measurement System (CAHMMS) was designed, prototyped, and validated to improve hinge moment estimates early in the design process. Validation was performed by integrating CAHMMS with a test wing and conducting wind tunnel tests to compare the expected theoretical, historical, and Computational Fluid Dynamics (CFD) predictions to the experimental results. As CAHMMS is an external measurement system, interference effects at the connection points were investigated. Further studies were undertaken to verify the CFD predictions with the experimental hinge moment measurements. Hinge moment results from the experimental data and the theoretical data closely correlated with less than …

Rv-7 N675cp Lean Versus Rich Fuel Mixture Aircraft Performance, Edward Spenser Burgos, William Beaman Howe

Aerospace Engineering

The purpose of this experiment was to compare the effects of flying with lean mixture versus rich mixture on aircraft performance. This was done by taking data in the RV-7 N675CP aircraft, RV-7A base aircraft that was built by students at California Polytechnic State University of San Luis Obispo. The RV-7 N675CP contains a Lycoming O-360-A 180 HP engine and fully automated flight data acquisition system. Test flight data indicates the aircraft consumes less fuel, has greater engine exhaust gas temperature (EGT), and possibly increases airspeed with a lean fuel mixture.

Matlab® Gui Visualization Of Classical Orbital Elements, Nancy Teresa Cabrera

Aerospace Engineering

The classical orbital elements of an orbit are eccentricity, angular momentum, inclination, right ascension of ascending node, true anomaly, and argument of perigee. These six parameters define an orbit. Using MATLAB® to model a satellite orbiting Earth in three dimensions, a graphical user interface was created to allow a user to manipulate the orbital elements to desired quantities. In doing so, each parameter’s impact on the orbit is visually displayed. This furthers the understanding of how the parameters are linked to the orbit. When the interface is first opened, the default circular orbit has a range of 20,000 kilometers, an …

Simplified Procedures For Seismic Analysis And Design Of Piers And Wharves In Marine Oil And Lng Terminals, Rakesh K. Goel

Civil and Environmental Engineering

No abstract provided.

Valveless Pulsejet Engine, Cory William Kerr, James Robert Reynolds

Aerospace Engineering

The goal of this project is to build a valveless pulsejet based on the Lady Anne model, known as the Focused Wave Engine VIII Twin Stack. This project has two main goals. The first goal is to design and build the valveless pulsejet. This includes machine work on stainless steel to build the engine, as well as modifying copper tubes to serve as a fuel injection system. The second goal is to build a test stand that allows for accurate data collection of the total thrust being produced by the engine and acts as a fuel injection and ignition system. …

Design, Fabrication, Structural Testing, And Numerical Analysis Of A Small Scale Composite Wing, Jacob David Gaunt, Juan Carlos Flores, Vincent Andrew Perry

Aerospace Engineering

A small scale composite wing based on a design found on an experimental aircraft was designed, constructed, and tested dynamically and statically. The wing was constructed similarly to an experimental aircraft wing. The performed static test was intended to produce pure bending. Strain gages were used to measure strains on the wing structure. The strains were converted to stresses to aid in analysis. The static test results suggested that the wing was actually under torsion. Four structural modes were found from the static test. A finite element analysis model was made to compare experimental results to numerical analytical results. The …

Use Of Machine Learning Classification Techniques To Detect Atypical Behavior In Medical Applications, Terrence Ziemniak

Technical Reports

Health care informatics is growing at an incredible pace. Originally health care organizations, like all other industries, used pen and paper to track medical information. Ten years ago the more mature health care organizations had simply practice management applications. Today these organizations have full blown electronic health records systems. Tomorrow these organizations will be sharing information across the globe.

Physicians (and the sponsoring organizations) are obligated to protect this data. Health care has followed the trend of many other industries in implementing technologies and processes to address certain risks. Encryption is enabled to ensure confidentiality. Business continuity techniques are applied …