Engineering Commons^™

Modeling And Preliminary Finite Element Analysis On The Spun Structure For The Cpintersep Project, Jason Carpenter, Kelly Cheng, Jeffrey Ma, Richard Pelham, Kevin Povey

Aerospace Engineering

This paper details the process of modeling and importing the model into FEA for the spun structure of the BS376 spacecraft. Engineering drawings were converted into 3D models using Pro/Engineer and then imported and into Patran for pre-processing of a Finite Element Model. To verify the Finite Element Model, several test cases were set up and solved using Nastran solver. Our simple load cases were found to be in congruence with analytical solution methods validating the finite element model.

Expansion In Existing And Future Franchises, Shane Hart, Daniel Jeng

Industrial and Manufacturing Engineering

Zensho Group has recently acquired the restaurant US based chains CoCo’s and Carrows but has not been able to affirm the same growth as the company has established in its home country of Japan. In order to fulfill their need to grow, extensive market analysis and research needs to be done. An expansion eastward and the introduction of their flagship restaurant chain, Sukiya, would offer growth potential. Determining the best locations for these new stores is the goal of this project. Low cost and high market penetration potential will be used to recommend the ideal locations that will benefit the …

A Practical Approach To Computer Donation Supply Chain For Non-Profit Organizations, John Jacob Burrell, Adam Robert Carpenter

Industrial and Manufacturing Engineering

The United States today has a plethora of unused electronic equipment. This equipment comes from universities, small businesses, corporations, and many other sources. This project looks at the best way to put this equipment back to use for the remainder of its usable life by donating it to non-profit organizations in need. In order to complete this project it was necessary to research the areas of Supply Chain Management, Operations Research, and Engineering Economics. The approach for this specific project first involves analyzing the current donation process at California Polytechnic State University – San Luis Obispo, and its ability to …

Aerodynamics Of A Supersonic Projectile In Proximity To A Solid Surface, Graham Doig, Tracie Barber, Eddie Leonardi, Andrew J. Neely, Harald Kleine

Aerospace Engineering

Flow around a Mach 2.4 NATO 5.56 mm projectile in close proximity to a ground plane was investigated using computational fluid dynamics for a direct numerical reproduction of live-range experiments. The numerical approach was validated against both the live-range tests and subsequent wind-tunnel experiments. A nonspinning half-model and a full, spinning projectile were examined to clarify the influence of rotation. Multiple ground clearances were tested to obtain clear trends in changes to the aerodynamic coefficients, and the three-dimensional propagation and reflection of the shock waves were considered in detail. The behavior of the flow in the near wake was also …

Closure To "Estimation Of The Water Balance Using Observed Soil Water In The Nebraska Sandhills", Venkataramana Sridhar, K. G. Hubbard

Civil Engineering Faculty Publications and Presentations

We are thankful to Szilagyi [2010] for providing us an opportunity to discuss the important points of our paper [Sridhar and Hubbard, 2010]. We demonstrated a seasonal water balance assessment using the Modified Thornthwaite-Mather (TM) model in the Nebraska Sandhills. We computed the water budget for a few representative weather monitoring stations located in the Sandhills using the high resolution soil moisture data to assess the storage. In our water balance analysis, soil moisture storage is determined based on observed soil moisture and actual evapotranspiration, ET_act was computed for each month using the change in storage in soil water …

Evaluation Of Compacted Silt Characteristics By Ultrasonic Pulse Velocity Testing, Desislava Z. Slavova, David M. Weidinger, Adam F. Sevi, Louis Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Unintrusive measurement of field modulus and moisture content of roadway subgrade and fill materials greatly enhances field control during construction. Establishing a measurement method in a laboratory setting provides an initial assessment of a tool's possible usefulness in the field. an ultrasonic test system was used in this research in order to determine the wave velocities of cylindrical soil specimens in a laboratory setting in support of a Briaud Compactive Device (BCD) research project. the BCD is a non-destructive test method that can quickly determine soil modulus both in the laboratory and the field. Cylindrical soil samples of silt were …

Mamdani Approach To Fuzzy Control, Logical Approach, What Else?, Samuel Bravo, Jaime Nava

Departmental Technical Reports (CS)

In fuzzy control, two approaches are mainly used: Mamdani's approach, in which we represent the knowledge base as a disjunction of statements Ai(x) & Bi(u) corresponding to individual rules, and logical approach, in which the knowledge base is represented as a conjunction of the rules themselves Ai(x) --> Bi(u). Both approaches are known not to be perfect, so a natural question arises: what other approaches are possible? In this paper, we describe all possible approaches; alternative approaches use an "exclusive or" operation and correspond, e.g., to the fuzzy transform idea.

Subwoofer Frequency Response Optimization By Means Of Active Control, Luis Dominguez

Aerospace Engineering

Most subwoofer systems have difficulties producing frequencies in the low end of the hearing spectrum due to the added power requirements and instabilities. Active controls can transform the audio signal without changing physical characteristics and ultimately generating a more impressive audio system. A Linkwitz transform crossover was implemented to extend the low end frequency response of a sealed enclosure. A graphical user interface in MATLAB was written to aid in selection of components, driver and enclosure volume. The circuit board was built and integrated with a home theater system inside of a couch and tested with a Real Time Analyzer. …

On The Solution Of A Class Of Large Body Problems With Full Or Partial Circular Symmetry By Using The Finite-Difference Time-Domain (Fdtd) Method, Wenhua Yu, Dean Arakaki, Raj Mittra

Electrical Engineering

This paper presents an efficient method to accurately solve large body scattering problems with partial circular symmetry. The method effectively reduces the computational domain from three to two dimensions by using the reciprocity theorem. It does so by dividing the problem into two parts: a larger 3-D region with circular symmetry, and a smaller 2-D region without circular symmetry. An finite-difference time-domain (FDTD) algorithm is used to analyze the circularly symmetric 3-D case, while a method of moments (MoM) code is employed for the nonsymmetric part of the structure. The results of these simulations are combined via the reciprocity theorem …

Capacity Reduction And Fire Load Factors For Lrfd Of Steel Members Exposed To Fire, Shahid Iqbal, Ronald S. Harichandran

Civil Engineering Faculty Publications

A general reliability-based methodology is proposed for developing capacity reduction and fire load factors for design of steel members exposed to fire. The effect of active fire protection systems (e.g., sprinklers, smoke and heat detectors, fire brigade, etc.) in reducing the probability of occurrence of a severe fire is included. The design parameters that significantly affect the fire design of steel members are chosen as random variables. Raw experimental data published in the literature was analyzed to obtain the statistics of parameters for which no statistical information was available in the literature. Model errors associated with the thermal analysis models …

Postures Féminines Dans L’Oeuvre De Calixthe Beyala, Carmen Husti-Laboye

Présence Francophone: Revue internationale de langue et de littérature

The aim of this paper is to analyze, through the example of the feminist positions proposed by Calixthe Beyala in the novels she wrote between 1987 and 2007, the change of the novelist’s ideological and artistic perspective. It emphasizes the progressive loss of critical voice to the advantage of a new voice wishing to understand itself as individuality in its world. This study reveals the novelist’s contribution to the construction of a new position of the individual in the context of French social and cultural life.

From Program Synthesis To Optimal Program Synthesis, Joaquin Reyna

Departmental Technical Reports (CS)

Design Decisions Under Risk And Uncertainty, Sravya Thoomu

All Theses

In the contemporary world of engineering, engineers strive towards designing reliable and robust artifacts while considering and attempting to control manufacturing costs. In due course they have to deal with some sort of uncertainty. Many aspects of the design are the result of properties that are defined within some tolerances, of measurements that are appropriate, and of circumstances and environmental conditions that are out of their control. This uncertainty was typically handled by using factors of safety, and resulted in designs that may have been overly conservative. Therefore, understanding and handling the uncertainties is critical in improving the design, controlling …

Development Of An Aluminum Semi-Solid Extrusion Process, T Rattanochaikul, S Janudom, N Memongkol, J Wannasin

Journal of Metals, Materials and Minerals

Semi-solid extrusion process is a new forming process that is quite promising because the process requires lower forming pressure than conventional solid extrusion. In addition, semi-solid extrusion does not require large machines, which results in lower production costs. The aim of this article is to study the feasibility of an aluminum semi-solid extrusion process. The semi-solid technique selected for usage in this study was the Gas Induced Semi-Solid (GISS) process. The laboratory extrusion system was developed in this work. In the experiments, nitrogen gas was injected into aluminum melt for about 5 seconds. After that, the obtained semi-solid slurry was …

Hardness And Fracture Toughness Of Alumina-Based Particulate Composites With Zirconia And Strontia Additives, T Oungkulsolmongkol, P Salee-Art, W Buggakupta

Journal of Metals, Materials and Minerals

This project aims to study characteristics and mechanical properties i.e. hardness and fracture toughness of alumina matrix composite materials containing zirconia and strontium oxide. Two groups of composite specimen were fabricated: (i) Al2O3 matrix with 3 mol% Y2O3- ZrO2, varied from 10, 20, 30 and 40 vol%, and (ii) Al2O3 matrix with 2, 5, 10 and 15 vol% SrO added in the form of SrCO3. The powders were blended and then pressed into pellets. The compacts were pressureless sintered at 1600 o C for 2 hours in air. Density measurement of the sintered composites was carried out using liquid immersion. …

Development Of Layered Zn-Fe Coatings For Better Corrosion Protection, R S. Bhat, R Udupak, A C. Hegde

Journal of Metals, Materials and Minerals

In this research, the Zn-Fe coating having successive layers of alloys of two different compositions were developed alternatively on mild steel for better corrosion protection. The multilayer coatings, or alternatively, composition modulated alloy (CMA) coatings of different configurations have been developed, and their corrosion behaviors were evaluated by electrochemical DC and AC methods. The cyclic cathode current densities and numbers of layers have been optimised for peak corrosion stability of the coatings. Under optimal condition, the CMA coating having 300 layers, having about 67 nm average thickness was found to be approximately six times higher corrosion resistant than monolayer coating …

47th Conference On Senior Engineering Design, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 47th Conference on Senior Engineering Design Projects was held on December 7, 2010 at the College of Engineering and applied Sciences on the Parkview Campus of Western Michigan University. The college sponsors the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

Creating Tomorrow, Fall 2010, College Of Engineering

College of Engineering Magazines

Annual magazine of the College of Engineering at Utah State University.

Mapping Problem And Requirements To Solution: Document Analysis Of Senior Design Projects, Shraddha Joshi

All Theses

Formulating and solving engineering problems and designing solutions that meet the established requirements are important skills that graduating engineering students need to possess. However, there are noticeable gaps in the literature with respect to understanding how the formulation of design problems and establishment of requirements affect the final design solution. This thesis is an initial attempt to understand the influence of level of detail of problem statement and requirements on the level of detail of final solution. In doing so, a document analysis of final reports from senior design class collected over a period of ten years from 1999 to …

Influence Of Topography Of Endovascular Stent Material On Smooth Muscle Cell Response, Vipul Taneja

All Theses

Although implantation of endovascular stents for the treatment of coronary and peripheral artery diseases has been one of the most rapidly used medical interventions, significant limitations in terms of a restenosis rate of 10-30% still persists. Neointimal hyperplasia characterized by a phenotypic shift of smooth muscle cells from contractile to synthetic type, has been deemed to be the predominant cause of restenosis. A number of stent surface parameters, including topography, have been attributed to play an important role in stent performance. Although endothelial cell and thrombotic response to surface roughness have been well evaluated, the effect of topography of the …

Effect Of Ultrasonic Vibration On The Mass Transfer Coefficient In A Sieve Plate Scrubber, Dinora Monroy Melendez

All Theses

The air pollution technique of wet scrubbers for fumes, mists and suspended dusts as part of a polluted gas stream has been study as well as used for industries for many decades. The sieve tray is the simplest type of these scrubbers. A laboratory-scale single-stage, sieve tray countercurrent wet scrubber has been designed to study the effect of ultrasonic vibrations on the rate of mass transfer. A 20 kHz ultrasound frequency was chosen for a high performance cavitation to enhance the mass transport between the gas and liquid phases. Various perforation diameters and weir heights were employed in order to …

Anomalous Loss Of Toughness Of Work Toughened Polycarbonate, Shawn E. Meagher

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Glassy polymers such as polycarbonate (PC) can be toughened through compressive plastic deformation. The increase in toughness is substantial, showing as much as a fifteen fold increase in the amount of dissipated energy during failure for samples compressed to 50% plastic strain. This toughness increase can be reversed through thermal aging at temperatures below the glass transition temperature (T_g = 147°C).

The combined effect of plastic compression and thermal aging has been studied using Charpy, Single Edge Notch Bending (SENB), and Compact Tension (CT) tests. The tests mapped the response of samples cut along different orientations relative to the …

Development And Characterization Of Shock Tubes For Laboratory Scale Blast Wave Simulation, Aaron D. Holmberg

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The prevalence of traumatic brain injury (TBI) in American soldiers exposed to a blast wave has created an urgent need to better understand the effects of blast wave insult to the head. Developing techniques that can experimentally simulate well controlled blast waves in a laboratory environment is a critical component of the research efforts towards this goal. For this work, a 4-in. cylindrical uniform shock tube and a nonuniform shock tube combining a 4-in. cylindrical gas driver with a 9-in. square driven section have been developed. The hosting laboratory, gas handling system, multichannel data acquisition systems, and the related network …

Evaluation Of Periodontal Scaling Task And Development Of Force–Endurance Models For Simulated Scaling Task, Vettrivel Gnaneswaran

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Force exertion is critical in grasping and holding activities at sub-maximal levels. Exertion misjudgments lead to musculoskeletal disorders (MSDs) impairing performance and productivity. Published literatures on grasping have addressed the force balance and endurance issues for non-prehensile movements of hand. However, little information is available on the force exerted in precision gripping employed in health care. Professionals, especially dental hygienists, when treating patients adopt awkward postures for extended period leading to cumulative trauma. Literatures on cumulative trauma have identified force exertion to be an important risk factor. Lack of information on fatigue with precision gripping motivated this research to establish …

The River Discontinuum: Applying Beaver Modifications To Baseline Conditions For Restoration Of Forested Headwaters, Denise Burchsted, Melinda Daniels, Robert Thorson, Jason Vokoun

Center for Integrative Geosciences

Billions of dollars are being spent in the United States to restore rivers to a desired, yet often unknown, reference condition. In lieu of a known reference, practitioners typically assume the paradigm of a connected watercourse. Geological and ecological processes, however, create patchy and discontinuous fluvial systems. One of these processes, dam building by North American beavers (Castor canadensis), generated discontinuities throughout precolonial river systems of northern North America. Under modern conditions, beaver dams create dynamic sequences of ponds and wet meadows among free-flowing segments. One beaver impoundment alone can exceed 1000 meters along the river, flood the valley laterally, …

Fusing Continuous And Discrete Data, On The Example Of Merging Seismic And Gravity Models In Geophysics, Omar Ochoa, Aaron Velasco, Vladik Kreinovich

Departmental Technical Reports (CS)

Towards Optimal Placement Of Bio-Weapon Detectors, Chris Kiekintveld, Octavio Lerma

Departmental Technical Reports (CS)

Biological weapons are difficult and expensive to detect. Within a limited budget, we can afford a limited number of bio-weapon detector stations. It is therefore important to find the optimal locations for such stations. A natural idea is to place more detectors in the areas with more population -- and fewer in desert areas, with fewer people. However, such a commonsense analysis does not tell us how many detectors to place where. To decide on the exact placement of bio-weapon detectors, we formulate the placement problem in precise terms, and come up with an (almost) explicit solution to the resulting …

How To Tell When A Product Of Two Partially Ordered Spaces Has A Certain Property: General Results With Application To Fuzzy Logic, Francisco Zapata, Olga Kosheleva, Karen Villaverde

Departmental Technical Reports (CS)

Towards Optimal Sensor Placement In Multi-Zone Measurements, Octavio Lerma, Craig Tweedie, Vladik Kreinovich

Departmental Technical Reports (CS)

In multi-zone areas, where the boundaries change with time, it is desirable to place sensors in such a way that the boundary is covered at all times. In this paper, we describe the optimal sensor placement with this property. In this optimal placement, sensors are placed along a see-saw trajectory going between the current location of the boundary and its farthest future location.

Computing The Range Of Variance-To-Mean Ratio Under Interval And Fuzzy Uncertainty, Sio-Long Lo, Gang Xiang

Departmental Technical Reports (CS)

In many practical problems such as radar imaging, it is useful to compute the variance-to-mean ratio. The need is important because for the sum of k identical independent signal components, both the variance and the mean are multiplied by k, so this ratio is independent on k and thus, provides useful information about the components. In practice, we only know the samples values with uncertainty. It is therefore necessary to compute the variance-to-mean ratio under this uncertainty. In this paper, we present efficient algorithms for computing this ratio under interval and fuzzy uncertainty.