Engineering Commons^™

Past Proceedings: Sixth International Conference On Case Histories In Geotechnical Engineering (2008), Multiple Authors

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Past Proceedings: First International Conference On Case Histories In Geotechnical Engineering (1984), Multiple Authors

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Past Proceedings: Second International Conference On Case Histories In Geotechnical Engineering (1988), Multiple Authors

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Past Proceedings: Fifth International Conference On Recent Advances In Geotechnical Earthquake Engineering And Soil Dynamics (2010), Multiple Authors

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

General Report — Session 4, Ronaldo Luna, Panos Dakoulas, Wei Zheng, K. Önder Çetin, Mary Perlea, Gordon Tung-Chin Kung, Usama El Shamy, Simone Barani

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

No abstract provided.

Preface, Shamsher Prakash

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

No abstract provided.

Table Of Contents, Multiple Authors

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

No abstract provided.

The Importance Of Creating Value In Seismic Design, Barnali Ghosh, Zygmunt Lubkowski, Jack Pappin

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

Major earthquakes have resulted in devastating consequences in terms of human and economic loss. In almost all the earthquakes we observe the failure of structures, sometimes due to poor construction but also due to designers not identifying the specific geo-hazards (iIntensity of ground motion, faults, liquefaction, slopes etc) which affect these structures. In many cases these damages could have been avoided if the original design had correctly identified the geohazards at the site and incorporated the philosophy of performance based design. In this paper several examples will be presented where the different stages of risk assessment will be identified and …

State Of The Art And Practice (Soap) Speakers, Multiple Authors

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

No abstract provided.

Effect Of Canyon Geometry And Ground Conditions On The Seismic Performance Of Tendaho Earthfill Dam In Ethiopia., Tensay G. Berhe, Wu Wei

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

The seismic performance of earth dams is usually studied by two dimensional (2D) space. However, considerable judgment is required to estimate the overall three dimensional dynamic response of dams in a narrow canyon from plane strain analyses of individual sections of the dam. This is so because the plane strain analysis normally ignores the arching effect of the valley which is particularly relevant for dams in narrow valleys. Because of the arching action, the effect of the canyon geometry on the dynamic response of earth dams will be a stiffening of the system. The effect of the canyon geometry is …

Modeling The Influence Of Soil Structure Interaction On The Seismic Response Of A 5 Mw Wind Turbine, Ian Prowell, Ahmed Elgamal, Jinchi Lu

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

In order to capture more energy, wind turbines are rapidly growing in height and rotor size. This growth increases the likelihood that soil structure interaction effects may influence the structural dynamic response. Current 3 MW turbines tower over the landscape with an 80 meter hub height and a 90 meter rotor diameter. This paper models a full soil structure system for the National Renewable Energy Laboratory onshore 5 MW reference wind turbine with a hub height of 90 meter and a 126 meter rotor diameter. A detailed finite element model of the turbine is created, including a full three dimensional …

Preparation The Site Specific Spectrum For Civil Regions Of Zagross Mountains, Kaveh Andisheh, Seydeh Sara Hossini, Mortaza Taghizadeh

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

In this paper the site specific spectra for a region of the Zagros Mountains containing 5 cities in Kurdistan province of Iran is prepared. For this purpose, all the occurred earthquakes, containing both historical and instrumental events, in each 5 city have been gathered then main earthquakes was prepared by elimination the aftershocks, foreshocks, and the incorrect reported events from the data and main earthquakes were taken into consideration to calculate the seismic parameters by Kijko [2000] method considering uncertainty in magnitude and incomplete earthquake catalogue. All seismic sources of the region are modeled and recurrence relationship is established. After …

Principles And Practices Of Seismic Microzonation: Case Studies In India, T. G. Sitharam, P. Anbazhagan, K. S. Vipin

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

This paper presents an overview of the principles and practices of seismic microzonation with some case studies in India. India has experienced major damages and loss of life due to earthquakes. Macrozonation map in Indian seismic code IS-1893 is frequently revised soon after a major earthquake in the country. New revision which was published in 2002 after Bhuj earthquake in 2001 contains four macro zones. These zones are based on geology and limited seismology input without considering geotechnical aspects such as site effects and liquefaction. In order to understand the earthquake vulnerability of major urban centers and prepare new zonation …

The Non-Regularity Of Earthquake Recurrence In California: Lessons From Long Paleoseismic Records From The San Andreas And San Jacinto Faults In Southern California, And The North Anatolian Fault In Turkey, Thomas Rockwell

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

A long paleoseismic record at Hog Lake on the central San Jacinto fault in southern California documents evidence for 18 surface ruptures in the past 3.8-4 ka. This yields a long-term recurrence interval of about 210 years, consistent with its slip rate of ~15 mm/yr and field observations of 3-3.5 m of displacement per event. However, during the past 3800 years, the fault has switched from a quasiperiodic mode of earthquake production, during which the recurrence interval is similar to the long-term average, to clustered behavior with the inter-event periods as short as a few decades (five surface ruptures occurred …

Seismic Stability Assessment The Raising Of The Geita Tailings Storage Facility, Tanzania, Michelle Theron, Fritz Wagener, Phillip Steenkamp

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

The Geita gold mine, owned by AngloGold Ashanti, is located in the north west of Tanzania on the African Rift Belt in a seismically active. It is also located in an environmentally sensitive area as it is directly upslope of Lake Victoria. The Tailings Storage Facility was constructed as a side valley dam with its maximum design embankment elevation 1216m (i.e. 35m above ground level) and store capacity approximately 60 million tons of tailings. The feasibility of increasing this wall ultimately to 1246m (i.e. 65m above ground level) thereby increasing its capacity by 88.5 million tons, is the topic of …

Ground Improvement Under Dynamic Loading, M. Ittershagen

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

To analyze the dynamic soil-structure interaction of railway lines on soft soil experimental and numerical investigations have been carried out. The mean intention was to get information about the influence of different soil improvement layouts and further on to establish a design tool for railway lines on soft soil based on the additional results of a numerically supported parametric study. The principle part of the paper is the presentation of the experimental and numerical investigations.

Rainwater Harvesting And Greywater Treatment Systems For Domestic Application In Ireland, Zhe Li, Fergal Boyle, Anthony Reynolds

Articles

Water shortage has been recognised as one of the key issues facing many countries. Fortunately, there are relatively abundant water resources available in Ireland because of its plenty of rainfall. However, Ireland will inevitably encounter water shortage in the future, especially in urban areas. The water consumption per capita per day in Ireland is one of the highest in Europe. The water demand is still increasing due to population growth and higher standard of living. The use of domestic rainwater harvesting and greywater treatment systems has the potential to supply nearly 94% of domestic water in Irish households. The utilisation …

Conference Program, Sang Done Kim, Yong Kang, Jea Keun Lee, Yong Chil Seo

The 13th International Conference on Fluidization - New Paradigm in Fluidization Engineering

Fluidization XIII: New Paradigm in Fluidization Engineering May 16-21, 2010 Hotel Hyundai, Gyeong-ju, Korea

Dynamic Elutriation Measurement In A Continuously Operated Bubbling Fluidized Bed, Willie Nicol, E. Du Toit, W. De Vos

The 13th International Conference on Fluidization - New Paradigm in Fluidization Engineering

Measurements were performed using a novel thermal mass flow meter. The dynamic behaviour of the total elutriation rate was monitored from start-up until a steady rate was achieved. It was found that the elutriation rate at unsteady conditions can be as much as 5 times that of the steady value and that it can take more than an hour to reach steady state. This is attributed to the dynamic changes of the fines distribution between the fluidized bed and dipleg. It was further shown that a steady dipleg height does not indicate steady elutriation rates. Using the flow meter to …

Gate 3 Grid Connection Group Processing Approach:An Analysis, John Leahy

Msc. in Energy Management

The aim of this project is to analyse the Group Processing Approach (the “GPA”) to renewable generator grid connections, and in particular the Gate 3 process which is the latest round of the GPA that is currently being implemented in the Republic of Ireland, to determine if it is the most effective approach for connecting new renewable generation. Gate 3 is the third series of the GPA for connecting renewable generation to the Irish Electricity grid where applications are processed in groups or batches. The size of the Gate 3 has bee capped at 3,900MW with applicants being selected based …

Rapid Diagnosis Of Tuberculosis In A Peripheral Setting, Elsje Pienaar

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Tuberculosis is an ancient and worldwide epidemic affecting millions of people in mainly the developing world, killing almost 2 million people in 2008. Current diagnostic techniques are outdated and have proven insufficient to control the disease. Smear microscopy has poor sensitivity and culture is slow to yield results. Modern diagnostic techniques are making great strides in shortening time to result but are restricted by two qualities: 1) prohibitively high costs prevent implementation in resource poor areas, and 2) equipment and technician requirements limit application to centralized laboratories. There exists a divide between new technologies and the people that need them …

The Use Of Factor Analysis In The Development Of Hand Sizes For Glove Design, Trevor M. Mclain

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Factor analysis was used to develop a more detailed description of the human hand to be used in the creation of glove sizes; currently gloves sizes are small, medium, and large. The created glove sizes provide glove designers with the ability to create a glove design that can provide fit to the majority of hand variations in both the male and female populations. The research used the American National Survey (ANSUR) data that was collected in 1988. This data contains eighty-six length, width, height, and circumference measurements of the human hand for one thousand male subjects and thirteen hundred female …

Optimizing Green Sand Properties Of Fluidized Sand From Aeration And Developing New Green Sand Testing Technique, Ananda Mani Paudel

Dissertations

Aeration sand filling is a new molding technique in foundry. Using this technique, sand with smooth flow can be filled in any orientation and shape using low-pressure air. This is not possible by conventional gravity and high-pressure blow filling techniques. Aeration was introduced as an energy-efficient and environmentally- friendly sand molding technique. In addition, aeration has its niche on quality of molds it could produce. Friability, one of the crucial green properties for the quality mold was significantly low in aeration in comparison to the gravity and high-pressure blow filling. The fluidization action in aeration acted upon the sand clay …

A Sustainable Business Proposition For Selling Irrigation Pumps In Ndola, Zambia, Robert Hosbach

Biomedical Engineering

Robert Hosbach is proposing a sustainable business plan to bring a small‐scale irrigation pump to rural Ndola, Zambia. With hundreds of thousands of citizens living in poverty and semi‐annual starvation, Ndola is in need of a means to grow crops effectively in the rainy season. Their current agricultural practices rely solely on the inconsistent rainfall during this time. My pump will be constructed from locally‐available aluminum cans, epoxy, glue, and fasteners (refer to Appendix B for technical drawings of the pump). The business will employ only a small number of Zambians, but will bring a means of food and income …

Performance Of Nevada’S Aggregates In Alkali-Aggregate Reactivity Of Portland Cement Concrete, Mohammad Shahidul Islam

UNLV Theses, Dissertations, Professional Papers, and Capstones

Alkali-aggregate reaction (AAR) is a form of distress that occurs in concrete and results in serviceability problems, cracks, spalling, and other deterioration mechanisms. There are two categories of AAR, namely, alkali-silica reaction (ASR) and alkali-carbonate reaction (ACR). Alkali-silica reaction is one of the most recognized deleterious phenomena in concrete, and has been a major concern since its discovery in the 1940s. The reaction which occurs between reactive silica or silicates present in some aggregates and alkalis of Portland cement produces an alkali-silica gel that expands in the presence of moisture resulting in concrete cracks. ACR is also a chemical reaction …

Assessment Of Impacts To Hydroclimatology And River Operations Due To Climate Change Over The Colorado River Basin, William Paul Miller

UNLV Theses, Dissertations, Professional Papers, and Capstones

This dissertation investigated the impacts of climate change to the hydroclimatology and river and reservoir management operations within the Colorado River Basin. Preliminary research indicated observed warming trends throughout the Colorado River Basin and corresponding seasonal trends to the magnitude and timing of runoff in the Colorado River Basin. Subsequent research investigated the changing character of precipitation and corresponding impacts to streamflow over the Colorado River Basin. Analysis of snowpack telemetry (SNOTEL) stations over the American West and Colorado River Basin indicated decreasing trends in annual snowpack, often at least at the 95% confidence interval. A shorter snowpack season was …

Architecture, Inertial Navigation, And Payload Designs For Low-Cost Unmanned Aerial Vehicle-Based Personal Remote Sensing, Calvin Coopmans

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis presents work done towards a Personal Remote Sensing (PRS) system: small Unmanned Aerial Vehicles (UAVs) with electronic, control, and sensing subsystems. Based on papers presented to conferences (AutoTestCon2008 and MESA2009), as well as other work on PRS, multiple levels of engineering are detailed: complex multi-UAV data flow; attitude estimation filters; real-time microprocessor functionality; and small, mobile power systems. Wherever possible, Open-Source tools and designs have been used, modified, or studied, providing excellent cost to performance ratios in most cases. First, the overall PRS UAV architecture, AggieAir, is presented with a motivating examples (GhostEye and EagleEye camera payloads). Then, …

Water Allocation Challenges In Rural River Basins: A Case Study From The Walawe River Basin, Sri Lanka, D. K. Neelanga Weragala

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation evaluates the water allocation challenges in the rural river basins of the developing world, where demands are growing and the supply is limited. While many of these basins have yet to reach the state of closure, their water users are already experiencing water shortages. Agricultural crop production in rural river basins of the developing world plays a major role in ensuring food security. However, irrigation as the major water consumer in these basins has low water use efficiency. As water scarcity grows, the need to maximize economic gains by reallocating water to more efficient uses becomes important. …

Economics Of Using Biomass Electric Power For Energy Application Of Light Commercial Building, Madan M. Nellore

Masters Theses and Doctoral Dissertations

Due to increased concern on global warming coupled with dwindling supply of conventional fuels, attention has been focus ed recently on use of renewable energy resources. The energy derived from biomass has a great potential in meeting this challenge by use of the state of art technology in gasifiers. Commercial units recently placed in the market have a potential of using the energy available in the biomass in producing electric power as well as in meeting the other building loads most efficiently, with negligible environmental effect. Woody mass, switch grass, hazzle nut shells and other biomass wastes can be utilized …

College Of Engineering Senior Design Competition Spring 2010, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Each student in his or her senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. The senior design project encourages the student to use everything learned in the engineering program to create a practical, real-world solution to an engineering challenge.

A highlight of the year-long senior design project is the senior design competition. This competition, which usually takes place the week before finals each semester, helps focus the senior students on increasing the quality and potential for commercial application for their design projects.

Judges from local industry evaluate the projects on innovation, commercial …