Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2008

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 811 - 840 of 4190

Full-Text Articles in Engineering

Electrochemical Synthesis, Characterization And Fluorescence Property Of Nano Na2Sif6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu Aug 2008

Electrochemical Synthesis, Characterization And Fluorescence Property Of Nano Na2Sif6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu

Journal of Electrochemistry

The nano TiO2 film was prepared by sol-gel process and characterized with X-ray diffraction(XRD) and scanning electron microscope(SEM).It was found that the average size of pore diameter was about 80 nm for the nano TiO2 film.The Nano Na2SiF6 was synthesized by electrochemical deposition on the nanoporous film electrode and characterized with XRD and transmission electron microscope(TEM).The result showed that the average size of nanoparticle was 20 nm for the nano Na2SiF6.The fluorescence property of nano Na2SiF6 was also studied briefly.The result indicated that the nano Na2SiF …

Go to article

Electricity Generation In Microbial Fuel Cells Catalyzed By Mixed Culture And Pure Culture, Chen-Dong Shuang, En-Ren Zhang, Guo-Wang Diao, Fang-Fang Fan, Jie Yuan Aug 2008

Electricity Generation In Microbial Fuel Cells Catalyzed By Mixed Culture And Pure Culture, Chen-Dong Shuang, En-Ren Zhang, Guo-Wang Diao, Fang-Fang Fan, Jie Yuan

Journal of Electrochemistry

Microbial fuel cells(MFCs) were constructed by inoculating fresh sedimentary microorganisms.Effect of phenol on performance of MFCs was investigated.The results showed that the generation of electrical current was induced by bacteria attached on the surface of the anode.Presence of phenol reduced the rate of glucose consumption and extended the duration of electricity generation with the same addition of glucose.In addition,the electricity generation by a single strain(belonging to pseudomonas species) separated from the sedimentary MFC was also investigated.The experimental results indicated that the presence of metabolic intermediates which exhibited electrochemical activity was necessary for the electricity production.Analysis of GC-MS showed that the …

Go to article

Formation Of Copper Microcrystals On Porous Silicon Films, Lan-Li Chen, Fu-Fang Zhou, Bao-Gai Zhai, Yuan-Ming Huang Aug 2008

Formation Of Copper Microcrystals On Porous Silicon Films, Lan-Li Chen, Fu-Fang Zhou, Bao-Gai Zhai, Yuan-Ming Huang

Journal of Electrochemistry

Microcrystals of metallic copper were electrochemically deposited onto the surface of porous silicon films in the aqueous electrolyte of copper(II) chloride.The microstructures of electrochemically deposited copper microcrystals on the porous silicon films were characterized by using scanning electron microscopy.The results have demonstrated that both center-hollowed and center-solid equilateral triangles in the sizes of several micrometers can be formed on the smooth bed of copper microcrystals.As the deposition duration increased from 0 to 28 hours,the fractal dimensions of the porous silicon was decreased from 2.608 to 2.252,suggesting that the electrochemical deposition can smooth the rough surface of porous silicon films.Compared to …

Go to article

Electrocatalytic Performance Of Carbon Supported Au-Ir Catalyst As Cathodic Catalyst In Direct Formic Acid Fuel Cell, Wei Chen, Ya-Wen Tang, Tain-Hong Lu Aug 2008

Electrocatalytic Performance Of Carbon Supported Au-Ir Catalyst As Cathodic Catalyst In Direct Formic Acid Fuel Cell, Wei Chen, Ya-Wen Tang, Tain-Hong Lu

Journal of Electrochemistry

In this paper,it is reported for the first time that the electrocatalytic activities of the carbon supported Au(Au/C),carbon supported Ir(Ir/C) and the carbon supported Au-Ir(Au-Ir/C) catalysts prepared in the aqueous solution with tetrahydrofuran(THF) for the oxidation of formic acid and for the oxygen reduction were compared.It was found that all three catalysts showed no electrocatalytic activity for the oxidation of formic acid,but the electrocatalytic activity of the Au-Ir/C catalyst for oxygen reduction was much better than those of Au/C and Ir/C.Thus,the Au-Ir/C catalyst is suitable to be used as the cathodic catalyst in Direct formic acid fuel cell(DFAFC).

Go to article

An Hap/Nanosilver Coating Prepared By Electrochemical Deposition And Its Antibacterial Characterization, Zhi-Wang Geng, Hui Wang, Chang-Jian Lin Aug 2008

An Hap/Nanosilver Coating Prepared By Electrochemical Deposition And Its Antibacterial Characterization, Zhi-Wang Geng, Hui Wang, Chang-Jian Lin

Journal of Electrochemistry

The silver nanoparticles were prepared by sodium citrate reduction of AgNO3.The nanoparticles were electrophoretic deposited on titanium, followed by the electrolytic deposition of hydroxyapatite(HAp). It is revealed, by the high-resolution transmission electron microscopy(HRTEM), that the diameters of nanosilver particles ranged from 5nm to 20nm. The XPS and XRD indicated the coating consisting of silver and HAp. According to the SEM images and antibacterial test, it is demonstrated that when the concentrations of the electrophoretic solution became higher more silver particles were depostited, and the antibacterial property improved. However, the particles aggregated on titanium greatly when the concentration exceeded …

Go to article

Preliminary Study Of Single Flow Zinc-Nickel Battery, Li Zhang, Jie Cheng, Yu-Sheng Yang, Yue-Hua Wen, Xin-Dong Wang, Zi-Li Xie Aug 2008

Preliminary Study Of Single Flow Zinc-Nickel Battery, Li Zhang, Jie Cheng, Yu-Sheng Yang, Yue-Hua Wen, Xin-Dong Wang, Zi-Li Xie

Journal of Electrochemistry

The micromorphology of zinc electrodeposited at different currents in the flowing electrolyte was studied.It has been shown that the structure of the zinc became compacted with the increase of the charge current density and no zinc dendrite was presenct.A cell with 2Ah capacity was assembled and the charge-discharge test was performed.The results showed that the average charge voltage was 1.84V and the average discharge voltage was 1.65V.The high efficiencies can be achieved with an average coulombic efficiency of 97% and energy efficiency of 86% over 1000 cycles.

Go to article

Direct Electrochemistry Of Hemoglobin On The Electrode Modified With Ddab And Swcnt, Wen-Jing Hou, Lin Zhou, Xia-Qin Wu, Hong-Xia Zhang, Wen Xie, Liu Yang, Zhong-Qing Lu Aug 2008

Direct Electrochemistry Of Hemoglobin On The Electrode Modified With Ddab And Swcnt, Wen-Jing Hou, Lin Zhou, Xia-Qin Wu, Hong-Xia Zhang, Wen Xie, Liu Yang, Zhong-Qing Lu

Journal of Electrochemistry

Hemoglobin(Hb) was immobilized onto the surface of glassy carbon electrode with the single-wall carbon nanotubes and surfactant didodecyldimethylamonium bromide(DDAB) modified previously and its electrochemical behaviors have been investigated by cyclic voltammetry.A pair of well-defined redox peaks has been obtained.Cyclic voltammetry and electrochemical impedance spectroscopy(EIS) were also used to study on the effect of different concentration of SWCNT in DDAB.The result shows that the 1 mg/mL is the best choice.The dependence of E0' on solution pH with the slope of 39 mV/pH,indicated that redox of the Hb is a one electron reaction with two protons transfer.The results also showed …

Go to article

The Effect Of Ru: Sn On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Wen-Bin Liu, Li-Kun Xu, Gui-Lin Xue Aug 2008

The Effect Of Ru: Sn On Properties Of Ru-Ir-Sn Oxide Anode Coatings, Lei Ji, Jun-Tao Wang, Wen-Bin Liu, Li-Kun Xu, Gui-Lin Xue

Journal of Electrochemistry

The anode coatings of Ru-Ir-Sn oxide with different Ru/Sn ratios were prepared by sol-gel method.The influences of Ru/Sn ratio on properties of anode coatings were studied by scanning electron microscope(SEM),energy dispersive X-ray detector(EDX),X-ray diffraction(XRD).The potential of chlorine evolution,current efficiency,accelerated life,cyclic vohammetry and electrochemical impedance spectroscopy(EIS) tests were carried out.The results showed that there was an obvious effect of Ru/Sn ratio on the morphology of the coatings.The cyclic voltammogram,double layer capacitances and accelerated life of anode coatings had a tendency to fall down firstly then increased as the Ru% increased,the current effency and potential of chlorine evolution had a tendency to …

Go to article

Hydrolysis Of Sodium Borohydride By Ru-Ni Foam Catalyst, Jie Cheng, Feng Ye, Tong-Tao Wang, Jing-Jing Li, Yong-Liang Wang, Xin-Dong Wang Aug 2008

Hydrolysis Of Sodium Borohydride By Ru-Ni Foam Catalyst, Jie Cheng, Feng Ye, Tong-Tao Wang, Jing-Jing Li, Yong-Liang Wang, Xin-Dong Wang

Journal of Electrochemistry

This paper presented a method of hydrogen generation from sodium borohydride solution for fuel cells.The Ru-Ni foam catalyst which was prepared by chemical plating showed strong activity and stability.The pretreatment of Ni foam before chemical plating was very important for the catalyst's strong activity and stability.This easy-to-prepared catalyst exhibited a good activity after being used several times.The effects of NaBH4 concentration,temperature and used times on the hydrogen generation rate were investigated.The results showed that the rate was remarkablely increased with the temperature rising and the rate increased more than ten times when the temperature of reaction rised from 15 …

Go to article

Design And Fabrication Of The High Efficient Platinum-Nanoporous Gold Catalysts, Zhao-Na Liu, Jin-Tao Zhang, Fang Tian, Peng-Peng Liu, Hou-Yi Ma, Yi Ding Aug 2008

Design And Fabrication Of The High Efficient Platinum-Nanoporous Gold Catalysts, Zhao-Na Liu, Jin-Tao Zhang, Fang Tian, Peng-Peng Liu, Hou-Yi Ma, Yi Ding

Journal of Electrochemistry

The nanoporous gold(NPG) electrodes with uniform pore sizes and ligaments were prepared by using a simple dealloying method.The as-prepared NPG showed high catalytic activity towards the oxidation of formic acid and formaldehyde.After tiny amount of platinum was deposited onto the NPG substrate,not only the structure stability of NPG was greatly improved,but also the Pt-Au bimetallic catalysts displayed the better catalytic activity and the stronger poison resistance towards the electrooxidation of small organic molecules than the bulk platinum due to synergistic effect between Au and Pt compositions.

Go to article

Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li Aug 2008

Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li

Journal of Electrochemistry

The multi-wall carbon nanotubes(MWNT) were dispersed successfully into water in the presence of dihexadecyl hydrogen phosphate(DHP) and a stable well-distributed suspension.A was formed sensor based on the multi-carbon nanotubes film coated glassy carbon electrode was developed.The electrochemical response of salbutamol was studied by square wave voltammetry.The oxidation peak potential of salbutamol at the modified electrode was observed at 0.604 V,which shifted about 40 mV negatively.The peak current increased 4.5 folds,in contrast to that at a bare electrode.Under optimal measurement conditions,there was a good linear relationship between the peak current(Ipa) and salbutamol concentration(C) in the range from 8.3 × 1 0 …

Go to article

A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao Aug 2008

A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao

Journal of Electrochemistry

The Pd-Ir/Ni electrodes were prepared by electrodeposition of Pd and Ir on the porous nickel foam surface.The structure,composition and state of the Pd-Ir catalyst were analyzed using SEM and XPS.The catalytic performance of Pd-Ir/Ni for H2O2 electroveduction at different concentrations of H2O2 were investigated.A limiting current density of 318 mA/cm2 was obtained with 0.4 mol/L H2O2.The aluminum-hydrogen peroxide semi-fuel cells using different aluminum alloys as anode and Pd-Ir/Ni as cathode were assembled and tested.It was found that the fuel cell with aluminum-manganese alloy anode demonstrated a maximum power density …

Go to article

Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang Aug 2008

Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang

Journal of Electrochemistry

A gold nano-particles modified glassy carbon electrode(GNP/GCE) was prepared by the"seed-mediated gold nano-particles growth method".Field emission scanning electron microscopy,ultraviolet-visible(UV-vis) spectroscopy analysis and electroalaylsis were employed to study the morphology and electrochemical performances.The resulting electrode showed excellent electro-catalytic activity toward the oxidation of salicylic acid and the response sensitivity was 1.8 fold than that obtained on GCE.Good linear relationship was obtained between response current and salicylic acid concentration in the range of 5.0 × 10-7 ~8.0 × 10-5 mol/L,which could be used in the detection of trace salicylic acid.

Go to article

Direct Electrochemistry Of Hemoglobin Immobilized On The Electrode Modified With Ionic Liquid And Kgm, Liu Yang, Xia-Qin Wu, Wen-Jing Hou, Lin-Fei Gu, Rong Wang, Xiao-Ming Guo, Zong-Rang Zhang Aug 2008

Direct Electrochemistry Of Hemoglobin Immobilized On The Electrode Modified With Ionic Liquid And Kgm, Liu Yang, Xia-Qin Wu, Wen-Jing Hou, Lin-Fei Gu, Rong Wang, Xiao-Ming Guo, Zong-Rang Zhang

Journal of Electrochemistry

Hemoglobin(Hb) has been immobilized on a glassy carbon electrode(GCE) surface with konjac glucomannan(KGM) and room temperature ionic liquid(RTIL).And which electrochemical behaviors have been investigated by cyclic voltammetry.The results shown that the entrapped Hemoglobin undergoes fast direct electron transfer reactions with formal potential of-0.38V(vs.SCE) and the E0' is linearly dependent on solution pH with a slope value of 51 mV/pH,due to the electron transfer of HbFe3+/HbFe2+ redox couple companied with a proton transfer.The electrocatalytic reduction of oxygen was also explored at the Hb-KGM/RTIL/Nafion/ GC electrode.

Go to article

Performance Of Magnetic Field Coupled With Electrochemical Process For Preparing Polyaluminum Chloride, Ke-Wu Pi, Wen-Qi Gong, Zheng-Qing Huang Aug 2008

Performance Of Magnetic Field Coupled With Electrochemical Process For Preparing Polyaluminum Chloride, Ke-Wu Pi, Wen-Qi Gong, Zheng-Qing Huang

Journal of Electrochemistry

Polyaluminum chloride(PAC) was prepared by electrochemical process coupled with magnetic field paralleling to the gravitation direction.The electrolyte of 0.1 M AlCl3 solution was used,with the iron plates as cathode and aluminum sheets as anode.PAC of 0.6 M total aluminum(AlT),83.2% Alb to AlT and basicity(Ba)=2.4 was synthesized when magnetic flux density was 0.4T,the distance of electrodes was 15 mm,the voltage of electrolysis cell was 2.4 V and current density was 300 A/m2.Under above experimental conditions,the voltage efficiency,energy efficiency and electrodes surface area to reduction cells of electrochemical reactor were 85.2%,81.5% and 140.1m2/m3,respectively.The polarization curves determined by constant-current method showed that the …

Go to article

Preparation And Supercapacitive Properties Of Co(Oh)2/Nay Composite, Chi Ma, Ling-Bin Kong, Yong-Chun Luo, Long Kang Aug 2008

Preparation And Supercapacitive Properties Of Co(Oh)2/Nay Composite, Chi Ma, Ling-Bin Kong, Yong-Chun Luo, Long Kang

Journal of Electrochemistry

The Co(OH)2/NaY composite was prepared by chemical precipitation method and then tested as an active electrode material for an electrochemical supercapacitor.The results indicated that the composite displayed superior capacitive performance.The maximum specific capacitance of Co(OH)2 was 632.5 F/g.The structure and electrochemical properties of the composite were also discussed.

Go to article

Study Of Triethyl Phosphate Self-Assembled Films On Iron For Corrosion Inhibition, Wen-Juan Guo, Shen-Hao Chen, Wei He, Xue-Hui Pang, Yuan-Yuan Feng Aug 2008

Study Of Triethyl Phosphate Self-Assembled Films On Iron For Corrosion Inhibition, Wen-Juan Guo, Shen-Hao Chen, Wei He, Xue-Hui Pang, Yuan-Yuan Feng

Journal of Electrochemistry

The self-assembled film of triethyl phosphate(TEP) formed on the iron surface was found to protect iron from corrosion in 0.5 mol·L-1 H2SO4 efficiently. The inhibition effects were investigated using the electrochemical impedance spectroscopy(EIS).EIS demonstrated that the charge-transfer resistance of the electrode covered with TEP film was greater than that of the naked iron electrodes and the inhibition efficiency of TEP film increased quickly in the initial period and then increased slowly. Quantum chemical calculations provide information about the process of adsorption of molecules on the metal surface at the molecular level.

Go to article

Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo Aug 2008

Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo

Journal of Electrochemistry

The self-assembled films of tetradecylamine were formed on iron surface, and the inhibition ability of which for iron corrosion in 0.5 mol/L H2SO4 solutions was studied by electrochemical impedance spectroscopy technique. Results indicated that longer immersion time would result in stronger inhibition ability of the films. The maximal inhibition efficiency(IE) of the tetradecylamine films was 68.7%. When the tetradecylamine films were modified by dodecylthiol, the mixed films became denser and more stable, thus the inhibition ability increased remarkably. The η of the mixed films increased to 78.2%.

Go to article

Distribution Iteration: A Robust Alternative To Source Iteration For Solving The Discrete Ordinates Radiation Transport Equations In Slab And Xy- Geometries, Nicholas J. Prins Aug 2008

Distribution Iteration: A Robust Alternative To Source Iteration For Solving The Discrete Ordinates Radiation Transport Equations In Slab And Xy- Geometries, Nicholas J. Prins

Theses and Dissertations

The discrete ordinates method is widely used to solve the Boltzmann transport equation for neutral particle transport for many engineering applications. Source iteration is used to solve the discrete ordinates system of equations, but can be slow to converge in highly scattering problems. Synthetic acceleration techniques have been developed to address this shortcoming; however, recent research has shown synthetic acceleration to lose effectiveness or diverge for certain problems. LTC Wager introduced an alternative to source iteration and demonstrated it in slab geometry. Here the method is further developed, enhancing efficiency in various ways, and demonstrated in XY-geometry as well as …

Go to article

Materials And Coatings Derived From The Polymerizable Ionic Liquid Surfactant 1-(2-Acryloyloxyundecyl)-3-Methylimidazolium Bromide, Dustin England Aug 2008

Materials And Coatings Derived From The Polymerizable Ionic Liquid Surfactant 1-(2-Acryloyloxyundecyl)-3-Methylimidazolium Bromide, Dustin England

Master's Theses and Doctoral Dissertations

The polymerizable ionic liquid surfactant, 1-(2-acryloyloxyundecyl)-3- methylimidiazloium bromide (IL-Br) was synthesized. The ternary phase diagram of the ILBr/ MMA/water system was constructed at 25 and 60 °C. Several microemulsion polymerizations were carried out, yielding materials that ranged from latexes, which formed transparent films upon drying, to solid rods. These materials were analyzed by various methods. Latex stability in several salt solutions was tested. Homopolymers and copolymers of IL-Br and MMA were produced by bulk and solution thermal polymerization. Bulk polymerized materials were insoluble in several solvents, suggesting light cross-linking. Solution polymers were soluble in DMF and were analyzed by SEC …

Go to article

Thermally Activated Switching In The Presence Of Non-Gaussian Noise, Lora Billings, Mark Dykman, Ira Schwartz Aug 2008

Thermally Activated Switching In The Presence Of Non-Gaussian Noise, Lora Billings, Mark Dykman, Ira Schwartz

Department of Mathematics Faculty Scholarship and Creative Works

We study the effect of a non-Gaussian noise on interstate switching activated primarily by Gaussian noise. Even weak non-Gaussian noise can strongly change the switching rate. The effect is determined by all moments of the noise distribution. It is expressed in a closed form in terms of the noise characteristic functional. The analytical results are compared with the results of simulations for an overdamped system driven by white Gaussian noise and a Poisson noise. Switching induced by a purely Poisson noise is also discussed.

Go to article

Hines, James Richard, 1903-1995 (Sc 1706), Manuscripts & Folklife Archives Aug 2008

Hines, James Richard, 1903-1995 (Sc 1706), Manuscripts & Folklife Archives

Manuscript Collection Finding Aids

Finding aid and scan (Click on "Additional Files" below) for Manuscripts Small Collection 1706. Statement of James Richard Hines, Bowling Green, Kentucky, related to expanded navigation of the Green and Barren Rivers and the potential for regional economic growth.

Go to article

A Novel Method For Characterization Of Peripheral Nerve Fiber Size Distributions By Group Delay Measurements And Simulated Annealing Optimization, Robert B. Szlavik, Galen E. Turner, Iii Aug 2008

A Novel Method For Characterization Of Peripheral Nerve Fiber Size Distributions By Group Delay Measurements And Simulated Annealing Optimization, Robert B. Szlavik, Galen E. Turner, Iii

Biomedical Engineering

The ability to determine the characteristics of peripheral nerve fiber size distributions would provide additional information to clinicians for the diagnosis of specific pathologies of the peripheral nervous system. Investigation of these conditions, using electro-diagnostic techniques, is advantageous in the sense that such techniques tend to be minimally invasive yet provide valuable diagnostic information. One of the principal electro-diagnostic tools available to the clinician is the nerve conduction velocity test. While the peripheral nerve conduction velocity test can provide useful information to the clinician regarding the viability of the nerve under study, it is a single parameter test that yields …

Go to article

Accelerated Life Testing Of Electronic Revenue Meters, Venkata Chaluvadi Aug 2008

Accelerated Life Testing Of Electronic Revenue Meters, Venkata Chaluvadi

All Theses

Electricity meters are devices that continuously record electrical energy consumption. In the past, meters have been of electromechanical type and consisted windings and moving parts. Electromechanical meters tend to be bulky, less accurate and more susceptible to tampering. As with other aging power system infrastructure in the US, most electricity meters are around 40 years old and are nearing the end of their intended lifespan. Concerns over the accuracy of these electromechanical meters along with advances in technology have led to development of new electronic meters which have additional benefits such as light weight, tamper-proof mechanisms, harmonic detection and Advanced …

Go to article

Framework For The Fully Probabilistic Analysis Of Excavation-Induced Serviceability Damage To Buildings In Soft Clays, Matt Schuster Aug 2008

Framework For The Fully Probabilistic Analysis Of Excavation-Induced Serviceability Damage To Buildings In Soft Clays, Matt Schuster

All Dissertations

In this dissertation, a framework for a fully-probabilistic analysis of the potential for building serviceability damage induced by an excavation in soft clays is established. This analysis framework is established based on the concept of a serviceability limit state where the resistance is represented by the capacity of a building to resist serviceability damage, and the loading is represented by the demand on a building due to excavation-induced ground movements. In this study, both the resistance and the loading are treated as a random variable; the resistance is characterized empirically based on a database of the observed building performance while …

Go to article

Engineered Micro-Environments And Vibrational Culture Systems For Vocal Fold Tissue Engineering, Jaishankar Kutty Aug 2008

Engineered Micro-Environments And Vibrational Culture Systems For Vocal Fold Tissue Engineering, Jaishankar Kutty

All Dissertations

Voice is produced by the conversion of aerodynamic energy from exhalation to acoustical energy for voice production by the vocal folds (membranous connective tissue) located in the larynx. The quality of voice depends on the biomechanical properties of the multi-layered vocal fold tissue which derive from its extracellular matrix (ECM) organization and composition. The wound healing response to vocal fold injuries is characterized by scarring and subsequent dysphonia due to alterations in the biomechanical properties of the tissue.
The work presented here is motivated by the importance of voice in maintaining quality of life and the inability of current treatment …

Go to article

Modeling Systems For Optimal Resource Allocation, Scheduling, And Decision Making, Esengul Tayfur Aug 2008

Modeling Systems For Optimal Resource Allocation, Scheduling, And Decision Making, Esengul Tayfur

All Dissertations

This dissertation focuses on the resource requirements and scheduling problem for logistic systems. We investigate solutions to this problem in two different logistic systems: logistic system of the health care facilities during emergency evacuations and delivery and distribution system of production industries. All hospitals must have an evacuation plan to ensure the safety of patients and prevent the loss of life. However, hospital operators have not been able to quantify how resource availability, the cost of acquiring those resources, and evacuation completion time are related. This research addresses this problem and contributes two methodologies to solve this problem. In the …

Go to article

Vision-Based Detection, Tracking And Classification Of Vehicles Using Stable Features With Automatic Camera Calibration, Neeraj Kanhere Aug 2008

Vision-Based Detection, Tracking And Classification Of Vehicles Using Stable Features With Automatic Camera Calibration, Neeraj Kanhere

All Dissertations

A method is presented for segmenting and tracking vehicles on highways using a camera that is relatively low to the ground. At such low angles, 3D perspective effects cause significant appearance changes over time, as well as severe occlusions by vehicles in neighboring lanes. Traditional approaches to occlusion reasoning assume that the vehicles initially appear well-separated in the image, but in our sequences it is not uncommon for vehicles to enter the scene partially occluded and remain so throughout. By utilizing a 3D perspective mapping from the scene to the image, along with a plumb line projection, a subset of …

Go to article

Evaluation Of Warm Asphalt Additives On Performance Properties Of Crm Binders And Mixtures, Chandra Akisetty Aug 2008

Evaluation Of Warm Asphalt Additives On Performance Properties Of Crm Binders And Mixtures, Chandra Akisetty

All Dissertations

The Warm Mix Asphalt (WMA) technologies have gained increasing popularity in recent years because of its unique property to allow the reduction in mixing and compaction temperatures of Hot Mix Asphalt (HMA) mixtures without compromising the quality of the mix. On the other hand, one of the reasons for utilizing the Crumb Rubber Modified (CRM) asphalt mixtures is that it increases the durability of the pavement by reducing the cracking and rutting potential of the pavement. However the CRM mixtures require a high mixing and compaction temperatures compared to the conventional HMA. Since the temperature requirements for CRM mixtures are …

Go to article

Combustion Knock Detection And Control Through Statistical Characterization Of Knock Levels, Jeffrey D. Naber, Satheesh Rajh Rajagopalan Aug 2008

Combustion Knock Detection And Control Through Statistical Characterization Of Knock Levels, Jeffrey D. Naber, Satheesh Rajh Rajagopalan

Michigan Tech Patents

A method of statistically characterizing combustion knock events includes receiving signals from a sensing device such as an accelerometer, estimating at least one parameter of a probability distribution function based on the received signals, and calculating a value indicative of an r/h percentile based on the parameter to predict upcoming combustion knock events.

Go to article

First Prev Next Last