Engineering Commons^™

Let's Not Abandon What Works, Edward Chair

West Virginia Law Review

No abstract provided.

Phylogenetic Reconstruction From Transpositions, Feng Yue, Meng Zhang, Jijun Tang

Faculty Publications

Background
Because of the advent of high-throughput sequencing and the consequent reduction in the cost of sequencing, many organisms have been completely sequenced and most of their genes identified. It thus has become possible to represent whole genomes as ordered lists of gene identifiers and to study the rearrangement of these entities through computational means. As a result, genome rearrangement data has attracted increasing attentions from both biologists and computer scientists as a new type of data for phylogenetic analysis. The main events of genome rearrangements include inversions, transpositions and transversions. To date, GRAPPA and MGR are the most accurate …

Inter-Frequency Bias Estimation For The Gps Monitor Station Network, Donny Holaschutz, Robert H. Bishop, R. Benjamin Harris, Brian Tolman

Mechanical Engineering Faculty Research and Publications

The inter-frequency bias (IFB) is present in all dual frequency combinations of GPS pseudorange and carrier phase observables. It is caused by the path dependent signal delays in both the satellite and receiver. That delay can be directly measured for a space vehicle prior to launch, or for a ground based receiver prior to its being used in the field. However the bias is known to drift, and monitoring the delay estimate by direct measurement is time consuming for ground based receivers and impossible for deployed space vehicles. Hansen (2002) examined the observability of IFB through a global model of …

Cephalometric Analysis Using Magnetic Resonance Imaging, Wade A. Williams

Loma Linda University Electronic Theses, Dissertations & Projects

Purpose: The purpose of this study was to determine if T1-weighted 3D magnetic resonance images performed at 3.0 Tesla could be used to conduct routine orthodontic cephalometric analysis.

Methods: Three cranial imaging methods were compared using sixteen non-growing subjects (10 male and 6 female) who were not claustrophobic, did not have any metallic restorations on the distal of first molars, had no medical implants and the female subjects were not pregnant. Sagittal cranial images were produced by three methods: (1) a digital lateral cephalometric (LC) radiograph (Orthophos XG Plus, Sirona^TM, Bensheim, Germany), (2) a 12-inch FOV cone beam …

Clarifying The Use Of Formative Measurement In The Is Discipline: The Case Of Computer Self-Efficacy, Andrew M. Hardin, Jerry Cha-Jan Chang, Mark A. Fuller

Management, Entrepreneurship and Technology Faculty Research

The article offers insights on the use of formative measurement in the information system (IS) discipline. It focuses on the comment which warns researchers on the pitfalls of misapplying formative measures in information system domain as well as on the issues related to computer self-efficacy (CSE) and formative measurement. It then asserts that formative indicator weights are sued in determining the conceptual meaning of constructs and notes that the conceptual definition of CSE will likely differ as they are used in different research models and contexts.

A Better Nondimensionalization Scheme For Slender Laminar Flows: The Laplacian Operator Scaling Method, Mark M. Weislogel, Yongkang Chen, D. Bolleddula

Mechanical and Materials Engineering Faculty Publications and Presentations

A scaling of the two-dimensional Laplacian operator is demonstrated for certain solutions (at least) to Poisson’s equation. It succeeds by treating the operator as a single geometric scale entity. The belated and rather subtle method provides an efficient assessment of the geometrical dependence of the problem and is preferred when practicable to the hydraulic diameter or term-by-term scaling for slender fully developed laminar flows. The improved accuracy further reduces the reliance of problems on widely varying numerical data or cumbersome theoretical forms and improves the prospects of exact or approximate theoretical analysis. Simple example problems are briefly described that demonstrate …

Discrete-Time Ripple Correlation Control For Maximum Power Point Tracking, Jonathan W. Kimball, Philip T. Krein

Electrical and Computer Engineering Faculty Research & Creative Works

Ripple correlation control (RCC) is a high-performance real-time optimization technique that has been applied to photovoltaic maximum power point tracking. This paper extends the previous analog technique to the digital domain. The proposed digital implementation is less expensive, more flexible, and more robust. with a few simplifications, the RCC method is reduced to a sampling problem; that is, if the appropriate variables are sampled at the correct times, the discrete-time RCC (DRCC) algorithm can quickly find the optimal operating point. First, the general DRCC method is derived and stability is proven. Then, DRCC is applied to the photovoltaic maximum power …

Empirical Study Of A Hybrid Algorithm Based On Clonal Selection And Small Population Based Pso., Pinaki Mitra, Ganesh K. Venayagamoorthy

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a hybrid algorithm, based on clonal selection algorithm (CSA) and small population based particle swarm optimization (SPPSO) is introduced. The performance of this new algorithm (CS2P2SO) is observed for four well known benchmark functions. The SPPSO is a variant of conventional PSO (CPSO), introduced by the second author of this paper, where a very small number of initial particles are used and after a few iterations, the best particle is kept and the rest are replaced by the same number of regenerated particles. On the other hand, CSA belongs to the family of artificial immune system (AIS). …

Optimal Energy-Delay Routing Protocol With Trust Levels For Wireless Ad Hoc Networks, Eyad Taqieddin, Ann K. Miller, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents the Trust Level Routing (TLR) pro- tocol, an extension of the optimized energy-delay rout- ing (OEDR) protocol, focusing on the integrity, reliability and survivability of the wireless network. TLR is similar to OEDR in that they both are link state routing proto- cols that run in a proactive mode and adopt the concept of multi-point relay (MPR) nodes. However, TLR aims at incorporating trust levels into routing by frequently changing the MPR nodes as well as authenticating the source node and contents of control packets. TLR calcu- lates the link costs based on a composite metric (delay …

Study On The Effects Of Battery Capacity On The Performance Of Hybrid Electric Vehicles, Deepak Somayajula, Andrew Meintz, Mehdi Ferdowsi

Electrical and Computer Engineering Faculty Research & Creative Works

Hybrid electric vehicles are gaining a significant presence in the auto market. However, the present day hybrid electric vehicles mostly use battery as a secondary source of power. If the battery were to be used as a primary source of power then the battery capacity is one of the important features in the design of a hybrid electric vehicle. Hybrid electric vehicles which are powered by more than one energy source have to follow a good energy management strategy to provide the best fuel economy in all situations. This paper presents a comprehensive study of the effect of variation of …

Network-Centric Localization In Manets Based On Particle Swarm Optimization, Raghavendra V. Kulkarni, Ganesh K. Venayagamoorthy, Ann K. Miller, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

There exist several application scenarios of mobile ad hoc networks (MANET) in which the nodes need to locate a target or surround it. Severe resource constraints in MANETs call for energy efficient target localization and collaborative navigation. Centralized control of MANET nodes is not an attractive solution due to its high network utilization that can result in congestions and delays. In nature, many colonies of biological species (such as a flock of birds) can achieve effective collaborative navigation without any centralized control. Particle swarm optimization (PSO), a popular swarm intelligence approach that models social dynamics of a biological swarm is …

Bio-Inspired Algorithms For The Design Of Multiple Optimal Power System Stabilizers: Sppso And Bfa, Tridib Kumar Das, Ganesh K. Venayagamoorthy, Usman O. Aliyu

Electrical and Computer Engineering Faculty Research & Creative Works

Damping intra-area and interarea oscillations are critical to optimal power flow and stability in a power system. Power system stabilizers (PSSs) are effective damping devices, as they provide auxiliary control signals to the excitation systems of generators. The proper selection of PSS parameters to accommodate variations in the power system dynamics is important and is a challenging task particularly when several PSSs are involved. Two classical bio-inspired algorithms, which are smallpopulation- based particle swarm optimization (SPPSO) and bacterial foraging algorithm (BFA), are presented in this paper for the simultaneous design of multiple optimal PSSs in two power systems. A classical …

Sr-2: A Hybrid Algorithm For The Capacitated Vehicle Routing Problem, Angel A. Juan, Javier Faulin, Josep Jorba, Barry Barrios, Scott Erwin Grasman

Engineering Management and Systems Engineering Faculty Research & Creative Works

During the last decades a lot of work has been devoted to develop algorithms that can provide near-optimal solutions for the capacitated vehicle routing problem (CVRP). Most of these algorithms are designed to minimize an objective function, subject to a set of constraints, which typically represents aprioristic costs. This approach provides adequate theoretical solutions, but they do not always fit real-life needs since there are some important costs and some routing constraints or desirable properties that cannot be easily modeled. In this paper, we present a new approach which combines the use of Monte Carlo simulation and parallel and grid …

Pervasive Open Spaces: An Intelligent And Scalable Pervasive Environment For Providing Contextual Resource Sharing, Amgad Magdy Madkour

Archived Theses and Dissertations

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Generating Robust Schedules Subject To Resource And Duration Uncertainties, Na Fu, Hoong Chuin Lau, Fei Xiao

Research Collection School Of Computing and Information Systems

We consider the Resource-Constrained Project Scheduling Problem with minimal and maximal time lags under resource and duration uncertainties. To manage resource uncertainties, we build upon the work of Lambrechts et al 2007 and develop a method to analyze the effect of resource breakdowns on activity durations. We then extend the robust local search framework of Lau et al 2007 with additional considerations on the impact of unexpected resource breakdowns to the project makespan, so that partial order schedules (POS) can absorb both resource and duration uncertainties. Experiments show that our proposed model is capable of addressing the uncertainty of resources, …

Finite Element Analysis Using Nonconforming Mesh, Ashok V. Kumar, Ravi Buria, Sanjeev Padmanabhan, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

A method for finite element analysis using a regular or structured grid is described that eliminates the need for generating conforming mesh for the geometry. The geometry of the domain is represented using implicit equations, which can be generated from traditional solid models. Solution structures are constructed using implicit equations such that the essential boundary conditions are satisfied exactly. This approach is used to solve boundary value problems arising in thermal and structural analysis. Convergence analysis is performed for several numerical examples and the results are compared with analytical and finite element analysis solutions to show that the method gives …

The Inverse Ocean Modeling System. Part Ii: Applications, J. C. Muccino, H. G. Arango, Andrew F. Bennett, B. S. Chua, Julia Muccino Cornuelle, E. Di Lorenzo, Gary D. Egbert, D. Haidvogel, J. C. Levin, H. Luo, A. J. Miller, A. M. Moore, Edward D. Zaron

Civil and Environmental Engineering Faculty Publications and Presentations

The Inverse Ocean Modeling (IOM) System is a modular system for constructing and running weak-constraint four-dimensional variational data assimilation (W4DVAR) for any linear or nonlinear functionally smooth dynamical model and observing array. The IOM has been applied to four ocean models with widely varying characteristics. The Primitive Equations Z-coordinate-Harmonic Analysis of Tides (PEZ-HAT) and the Regional Ocean Modeling System (ROMS) are three-dimensional, primitive equations models while the Advanced Circulation model in 2D (ADCIRC-2D) and Spectral Element Ocean Model in 2D (SEOM-2D) are shallow-water models belonging to the general finite-element family. These models, in conjunction with the IOM, have been used …

Research On Application Of Rfid In Smart Gate Of Container Terminal, Jiying Song

Faculty Publications - George Fox Digital

With the rapid development of logistics, the operation and management of logistics enterprise becomes more complex and changeable. Under the background, it has become the urgent problem for the policy-maker to resolve that how to construct the highly effective information system, how to apply the information technology, how to carry on the all-the-way tracking, how to enhance the collection, processing and serviceability of information and how to shorten the exchange of information and the operation time. Along with the rapidly growth of domestic as well as domestic and international volume of trade and the fast development of container fleet, that …

Combat Identification Using Multiple Tuav Swarm, Younin Kang

Theses and Dissertations

In modern warfare, Tactical Unmanned Aerial Vehicles (TUAVs) are rapidly taking on a leading role in traditional and non-traditional ISR, to include Automatic Target Recognition (ATR). However, additional advancements in processors and sensors on TUAVs are still needed before they can be widely employed as a primary source for positive identification in the Combat Identification (CID) process. Cost is a driving factor for operating an ATR system using multiple TUAVs. The cost of high quality sensors appropriate for a single TUAV can be significantly higher than less sophisticated sensors suitable for deployment on a group, or swarm, of coordinated TUAVs. …

Hall Thruster Plume Diagnostics Utilizing Microwave Interferometry, Vipul Sharma

Theses and Dissertations

The fatigue behavior of two woven SiC-SiNC ceramic matrix composites (CMCs) was investigated at 1300 °C in laboratory air and in steam. The first composite (C1) consists of a PIP SiNC matrix reinforced with Sylramic (Syl) fibers woven in a five-harness satin weave fabric and coated with a proprietary dual-layer interface. The second composite (C2) consists of a modified PIP SiNC matrix reinforced with Sylramic-iBN (Syl-iBN) fibers woven in a five-harness satin weave fabric and coated with a proprietary dual-layer interface. The tensile stress-strain behavior was investigated and the tensile properties measured at 1300°C. Tension-tension fatigue behavior was studied for …

Range Precision Of Ladar Systems, Steven E. Johnson

Theses and Dissertations

A key application of Laser Detection and Ranging (LADAR) systems is measurement of range to a target. Many modern LADAR systems are capable of transmitting laser pulses that are less than a few nanoseconds in duration. These short-duration pulses provide excellent range precision. However, randomness in the detected laser signals places limits on the precision. The goal of this dissertation is to quantify the range precision limits of LADAR systems. The randomness in the time between photon arrivals, which is called shot noise, is discussed in depth. System-dependent noise sources such as dark current and detector gain variation are considered. …

Ultracompact Awg Using Air-Trench Bends With Perfluorocyclobutyl Polymer Waveguides, Seunghyun Kim, Gregory P. Nordin, John Ballato, Yongbin Lin, Nazli Rahmanian, Dennis W. Smith, Chris Topping

Faculty Publications

Using air-trench bends, an ultracompact 8 8 arrayed waveguide grating (AWG) demultiplexer (200-GHz channel spacing) for wavelength-division multiplexing (WDM) has been designed and fabricated with perfluorocyclobutyl (PFCB) core and clad co-polymers on a polyimide substrate. Compared to a conventional AWG in the same material system, the air-trench bend AWG shrinks the required chip area by a factor of 20. The decreased size is a factor in reducing the measured thermal shift to -0.012 nm/ C and decreasing the polarization-dependent wavelength shift to 1.3 nm.

Ultracapacitor Assisted Powertrains: Modeling, Control, Sizing, And The Impact On Fuel Economy, Dean Rotenberg

All Theses

This thesis investigates possible fuel economy gains attainable by a combination of high-power density ultracapacitors (also called supercapacitors) and an induction motor integrated into a conventional vehicle powertrain for power assistance.
Periods of quick acceleration require a much higher power output from an automobile than what is encountered under more typical driving conditions. A simple kinetic energy calculation can show that accelerating a 2000 kg vehicle (roughly the size of a Ford Explorer SUV) from 0 to 60 mph in 10 seconds requires almost 70 kW of power, in addition to the power needed to overcome road and air drag …

Some Rather Mechanical Reflections On Symmetry: In Art, Science, Engineering, Mathematics, Etc., Jim Mcgovern

Articles

This Inaugural Lecture consists of some of my rather mechanical, being an engineer, reflections on symmetry in diverse areas such as art, science, engineering, mathematics, etc. I explain what symmetry is to me, giving examples with lots of images and mentioning or at least barely referencing art, science, architecture, engineering, heritage, cosmology, bicycles, flight, invention, ingenuity, history, wallpaper, mathematics, typography, structures, regular shapes, coordinate systems, spacetime, thermodynamics and suchlike.

Deep Sea Underwater Robotic Exploration In The Ice-Covered Arctic Ocean With Auvs, Clayton Kunz, Chris Murphy, Richard Camilli, Hanumant Singh, John Bailey, Ryan M. Eustice, Chris Roman, Michael Jakuba, Claire Willis, Taichi Sato, Ko-Ichi Nakamura, Robert A. Sohn

Graduate School of Oceanography Faculty Publications

The Arctic seafloor remains one of the last unexplored areas on Earth. Exploration of this unique environment using standard remotely operated oceanographic tools has been obstructed by the dense Arctic ice cover. In the summer of 2007 the Arctic Gakkel Vents Expedition (AGAVE) was conducted with the express intention of understanding aspects of the marine biology, chemistry and geology associated with hydrothermal venting on the section of the mid-ocean ridge known as the Gakkel Ridge. Unlike previous research expeditions to the Arctic the focus was on high resolution imaging and sampling of the deep seafloor. To accomplish our goals we …

Big Challenges In Designing Small Parts For Mass Production, Kevin Delaney, David Kennedy

Conference Papers

Micro manufacturing involves the production of parts or products with features on a micro scale. The technology is used to produce parts for several business sectors which have experienced dramatic growth in recent years and forecasts are that this growth will continue in the years ahead. With the loss of traditional manufacturing jobs to lower-cost locations many companies in Ireland see micro manufacturing as having significant potential to preserve and increase revenue. A move into micro manufacturing will present significant opportunities for those companies willing to take the risk of producing parts with micro dimensions. Such a transition is a …

A Heuristic Method For Job-Shop Scheduling With An Infinite Wait Buffer: From One-Machine To Multi-Machine Problems, Z. J. Zhao, J. Kim, M. Luo, Hoong Chuin Lau, S. S. Ge

Research Collection School Of Computing and Information Systems

Through empirical comparison of classical job shop problems (JSP) with multi-machine consideration, we find that the objective to minimize the sum of weighted tardiness has a better wait property compared with the objective to minimize the makespan. Further, we test the proposed Iterative Minimization Micro-model (IMM) heuristic method with the mixed integer programming (MIP) solution by CPLEX. For multi-machine problems, the IMM heuristic method is faster and achieves a better solution. Finally, for a large problem instance with 409 jobs and 30 types of machines, IMM-heuristic method is compared with ProModel and we find that the heuristic method is slightly …

Evaluating Three-Dimensional Effects On The Behavior Of Compliant Bistable Micromechanisms, Brian B. Cherry, Larry L. Howell, Brian D. Jensen

Faculty Publications

Fully compliant bistable micromechanisms (FCBMs) have potential use in numerous applications, including switches, relays, shutters, and low-power sensing arrays. Two-dimensional finite element models for these FCBMs have been used in device analysis and design, and provided an adequate match to preliminary experimental data. However, with more extensive experimentation over a large range of designs, some results proved to be radically different than predicted, with trends not consistent with effects such as stiction or electrostatic forces. Two different types of behavior, Behavior 1 and Behavior 2, are observed and explained, only one of which is predicted by 2-D models. This paper …

Windsat Passive Microwave Polarimetric Signatures Of The Greenland Ice Sheet, David G. Long, Li Li, Peter Gaiser, Mary R. Albert, Elizabeth M. Twarog

Faculty Publications

WindSat has systematically collected the first global fully polarimetric passive microwave data over both land and ocean. As the first spaceborne polarimetric microwave radiometer, it was designed to measure ocean surface wind speed and direction by including the third and fourth Stokes parameters, which are mostly related to the asymmetric structures of the ocean surface roughness. Although designed for wind vector retrieval, WindSat data are also collected over land and ice, and this new data has revealed, for the first time, significant land signals in the third and fourth Stokes parameter channels, particularly over Greenland and the Antarctic ice sheets. …