Engineering Commons^™

Pathogen Best Management Practices (Bmps), Richard K. Koelsch

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

Management practices targeting pathogens focus on establishing multiple barriers between the pathogen source and water, with each barrier designed to lessen the risk of pathogens. The “Agricultural Environmental Management” program developed at Cornell University for dairy producers in New York watersheds promotes a four-barrier approach.

Alkaline Pretreatment Of Coastal Bermudagrass For Bioethanol Production, Ziyu Wang, Deepak R. Keshwani, Arthur P. Redding, Jay J. Cheng

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

Lignocellulosic materials are regarded as an alternative energy source for bioethanol production to reduce our reliance on fossil fuels. Pretreatment is important for improving the enzymatic digestibility of lignocelluloses to increase the yield of fermentable sugars. Alkaline (sodium hydroxide and lime (calcium hydroxide)) pretreatment of coastal bermudagrass for enhanced reducing sugars recovery was investigated in this study. The effect of NaOH pretreatment at 121°C using 1%, 2% and 3% (w/v) NaOH for 15, 30, 60 and 90 minutes was evaluated first. Lower NaOH concentrations (0.5% and 0.75%) and lower temperatures (50, 80 and 100°C) were then examined. Lime (0.1 g …

Preparation And Characterization Of Tapioca Starch-Poly(Lactic Acid)-Cloisite Na+ Nanocomposite Foams, Siew-Yoong Lee, Milford Hanna

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Tapioca starch, poly(lactic acid), and Cloisite NA⁺ nanocomposite foams, with four clay contents (1, 3, 5, 7, wt %), were prepared by melt-intercalation method. Selected structural, thermal, physical, and mechanical properties were characterized using X-ray diffraction (XRD), scanning electron microscopy, differential scanning calorimetry, and an Instron universal testing machine, respectively. XRD results indicated that the 1 wt % nanocomposite foam did not show the characteristic basal reflection of the nanoclay. The 3, 5, and 7 wt % nanocomposite foams produced a mixture of intercalated and tactoid structures. The d₀₀₁-spacing of 3, 5, 7 wt % nanocomposite foams …

Estimating The Savings From Improving Pumping Plant Performance., Derrel L. Martin

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

This brochure describes a method to estimate the cost of pumping water and to compare the amount of energy used to that for a well maintained and designed pumping plant. The results can help determine the feasibility of repairing the pumping plant.

Nutrient Transport As Affected By Rate Of Overland Flow, John E. Gilley, W. F. Sabatka, B. Eghball, David B. Marx

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Little information is currently available concerning the effects of varying flow rate on nutrient transport by overland flow. The objective of this study was to measure the effects of overland flow rate on nutrient transport following the application of beef cattle or swine manure to plots containing 0, 2, 4, or 8 Mg ha^-1 of corn residue. After addition of residue materials to 0.75 m wide by 2.0 m long plots, beef cattle or swine manure was added and the plots were then either disked or maintained in a no-till condition. Three 30 min simulated rainfall events, separated by …

Narrow Grass Hedge Effects On Nutrient Transport Following Compost Application, John E. Gilley, B. Eghball, David B. Marx

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The placement of stiff‐stemmed grass hedges on the contour along a hillslope has been shown to decrease nutrient transport in runoff. This study was conducted to measure the effectiveness of a narrow grass hedge in reducing runoff nutrient transport from plots with a range of soil nutrient values. Composted beef cattle manure was applied at dry weights of 0, 68, 105, 142, and 178 Mg ha^-1 to a silty clay loam soil and then incorporated by disking. Soil samples were collected 243 days later for analysis of water‐soluble phosphorus (WSP), Bray and Kurtz No. 1 phosphorus (Bray‐1 P), NO …

Rule-Based Mamdani-Type Fuzzy Modeling Of Skin Permeability, Deepak R. Keshwani, David D. Jones, George E. Meyer, Rhonda M. Brand

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Two Mamdani type fuzzy models (three inputs–one output and two inputs–one output) were developed to predict the permeability of compounds through human skin. The models were derived from multiple data sources including laboratory data, published data bases, published statistical models, and expert opinion. The inputs to the model include information about the compound (molecular weight and octonal–H₂O partition coefficient) and the application temperature. One model included all three parameters as inputs and the other model only included information about the compound. The values for mole molecular weight ranged from 30 to 600 Da. The values for the log …

Comparison Of Lipid Extraction Methods Of Food-Grade Sorghum (Sorghum Bicolor) Using Hexane, K. L. Christiansen, Curtis L. Weller, V. L. Schlegel, I. M. Dweikat

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Much has been reported concerning sorghum phytochemicals, such as policosanols, but little literature exists on how various extraction methods might be used to optimize the recovery of such phytochemicals. The purpose of this study was to compare three extraction methods for recovery of different sorghum lipids. Lipids were extracted from whole kernel and ground Macia, a food-grade sorghum hybrid, with hexane by a Soxtec method, a refluxing method (RB), and a bench-scale recirculated solvent (RC) method. Comparisons of total lipid yield and lipid class yields extracted from the grain by each method were made. Total lipid yield for the three …

Field Slope Effects On Uniformity Of Corn Seed Spacing For Three Precision Planter Metering Systems, Corey L. Searle, Michael F. Kocher, John A. Smith, Erin E. Blankenship

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The effects of field slope on planter seed spacing uniformity were evaluated for three different seed metering units (cell plate, finger pick‐up, and flat plate) operating with medium round corn seed in a laboratory using the University of Nebraska planter test stand with an opto‐electronic seed spacing sensor system. The metering units included a John Deere MaxEmerge™ Plus VacuMeter row unit with the standard cell corn plate, a John Deere MaxEmerge™ Plus VacuMeter row unit with the flat plate, and a John Deere MaxEmerge™ Plus row unit with the finger pick‐up metering system. Planter seed spacing uniformity was measured using …

Visible/Near-Infrared Hyperspectral Imaging For Beef Tenderness Prediction, Govindarajan Konda Naganathan, Lauren M. Grimes, Jeyamkondan Subbiah, Chris R. Calkins, Ashok Samal, George E. Meyer

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Beef tenderness is an important quality attribute for consumer satisfaction. The current beef quality grading system does not incorporate a direct measure of tenderness because there is currently no accurate, rapid, nondestructive method for predicting tenderness available to the beef industry. The objective of this study was to develop and test a visible/nearinfrared hyperspectral imaging system to predict tenderness of 14-day aged, cooked beef from hyperspectral images of fresh ribeye steaks acquired at 14-day post-mortem. A push-broom hyperspectral imaging system (wavelength range: 400-1000 nm) with a diffuse-flood lighting system was developed and calibrated. Hyperspectral images of beef-steak (n = 111) …

Performance Evaluation Of Aluminum Test Cell Designed For Determining The Heat Resistance Of Bacterial Spores In Foods, H.-J. Chung, Sohan Birla, Juming Tang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Thermal inactivation kinetic studies are necessary to determine heat resistances of spores in the development of new thermal processes for low-acid shelf-stable products. Most currently available sample holders used in the kinetic studies take long time to reach the target sample temperature, hence fail to provide isothermal condition. In this research, novel aluminum test cells were developed to facilitate easy loading and unloading solid and liquid food samples in a hermetically sealed 1 ml cavity to evaluate the heat resistance of bacterial spores when heated at temperatures above 100 °C. Design of the test cell was governed by minimum come-up …

Characterization Of Radio Frequency Heating Of Fresh Fruits Influenced By Dielectric Properties, Sohan Birla, S. Wang, Juming Tang, G. Tiwari

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Because of its fast and volumetric nature, radio frequency (RF) heating has been looked upon as a way to overcome the problems associated with conventional heating methods used for disinfestation of fruits. But non-uniform heating within fruits is a major obstacle in adaptation of this technology. In this study, RF heating patterns influenced by dielectric properties (DPs) of fruits were investigated both experimentally and mathematically. A computer simulation model was developed using FEMLAB 3.4, a commercial software for solving Maxwell’s electromagnetic and Fourier’s heat transfer equations. Orange, apple, grapefruit, peach, and avocado fruits, selected for these studies were subjected to …

Review Of Career Development In Bioengineering And Biotechnology By Guruprasad Madhavan, Barbara Oakley, And Luis Kun (Editors), Springer Science+Business Media, Llc, 2008, Mark R. Riley

Department of Agricultural and Biological Systems Engineering: Faculty Publications

As an educator in biological engineering, I am often asked by students about career opportunities in this growing field. The field of biological engineering merges approaches and methodologies from a variety of traditional disciplines, and so practitioners of biological engineering can find professional opportunities in numerous areas.

The recently published book Career Development in Bioengineering and Biotechnology, (485 pages) edited by Madhavan, Oakley, and Kun, represents an ambitious undertaking with the goal of not only presenting career options and career development techniques but also addressing how the work of an individual can impact society. The book contains 71 chapters divided …

Characterization Of A Polymer Surface With Sequentially Immobilized Proteins, Anuradha Subramanian, Tarlan Mammedov, Karl E. Kador

Anuradha Subramanian Publications

To overcome the procoagulant processes on the surfaces of biomaterials, surface modifications have been undertaken to achieve hemocompatability characteristics that are comparable to the native endothelium. Our immediate goal in this paper is to design and develop strategies to inhibit thrombin activation on biomaterial surfaces. We will use biodurable polyurethane (PU) as the background polymer and synthesize biomaterial surfaces containing two immobilized recombinant proteins. To attain our objective, we have first undertaken the surface modification of biodurable polyurethane (chronoflex- AR) to enable the sequential immobilization of proteins via a bi-dentate bridge, a novel modification strategy. We have verified the creation …

System And Method For Analyzing Material Properties Using Hyperspectral Imaging, Jeyamkondan Subbiah, Chris Richard Calkins, Ashok Samal

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Systems and methods are provided for analyzing material properties of an object using hyperspectral imaging. An exemplary method includes obtaining a hyperspectral image of an object; analyzing the hyperspectral image according to an algorithm; and correlating data obtained from the analysis with material properties of the object.

Oligo(Vinylidene Fluoride) Langmuir-Blodgett Films Studied By Spectroscopic, Rafal Korlacki, J. Travis Johnston, Jihee Kim, Stephen Ducharme, Daniel W. Thompson, Vladimir M. Fridkin, Zhongxin Ge, James M. Takacs

Stephen Ducharme Publications

Thin films of amphiphilic vinylidene fluoride oligomers prepared by Langmuir–Blodgett deposition on silicone substrates were investigated by comparing experimental and theoretical mid-infrared (IR) spectra. The experimental spectra were obtained using infrared spectroscopic ellipsometry. Theoretical spectra were calculated using density functional theory. Excellent correspondence of major IR bands in both data sets shows that the molecular backbone is oriented with the long axis normal to the substrate plane. This is in contrast to poly vinylidene fluoride[1] LB films, in which the polymer chains are parallel to the substrate.

Performance Requirements And Evaluation Procedures For Advance Wide Area Detectors, Anuj Sharma, Matthew Harding, Brad Giles, Darcy M. Bullock, James R. Sturdevant, Srinivas Peeta

Department of Civil and Environmental Engineering: Faculty Publications

Dilemma zone protection ideally requires the exact position and speed of all the vehicles approaching the intersection. However, point detectors, typically used to protect vehicle incursion into the dilemma zone, only provide binary information about the presence or absence of a vehicle at a fixed point in space. The information regarding position and speed of the vehicle in subsequent time steps is extrapolated. The extrapolation error increases with the increase in projection time. Wide area detector (WAD) overcomes this drawback by tracking each vehicle at all times until they move out of range. Such a detector has the potential to …

Field Evaluation Of Alternative Real-Time Methods For Estimating Approach Delay At Signalized Intersections, Anuj Sharma, Darcy M. Bullock

Department of Civil and Environmental Engineering: Faculty Publications

Vehicle delay at a signalized intersection is among the widely used performance measures of efficiency at a signalized intersection. The Highway Capacity Manual (HCM) uses this performance measure to report the level of service at a signalized intersection. This performance measure is also used to estimate travel time along the arterials. With the advent of technological advances in the field of vehicle detection, real-time measurement of delay at a signalized intersection has become economically and computationally feasible. This paper compares three emerging techniques for estimating approach delay: an Input Output technique (IO), a Hybrid technique, and the HCM delay equation. …

Incorporating Value And Risk Management Principles In Developing Low-Income Housing Projects, Ayman Ahmed Ezzat Othman

Architectural Engineering

The construction industry is concerned with satisfying its customers’ needs through delivering projects that achieve their objectives and meet their expectations on time, within budget and as specified. Despite the several housing programmes constructed by government authorities, there is a real housing problem for the poor. This problem is attributed to a number of reasons. Amongst them, the inability of the low-incomers to cover the cost of supplied houses and the lack of the constructed projects to achieve users’ satisfaction. This highlighted the need to develop innovative and creative solutions that can deliver housing projects that achieve the satisfaction of …

Development Of Fiber Bend Loss Edge Filter, Pengfei Wang

Doctoral

This PhD thesis addresses several aspects of macrobending loss in single-mode optical fibers. The context for the work is the development of an edge filter for a rapid wavelength measurement system. Based on scalar approximation theory and the beam propagation method, a simulation platform is developed and used to predict the macrobending loss of singlemode fiber with single or multiple coating layers. A single-mode step index fiber macrobending loss edge filter is investigated theoretically in terms of baseline loss, discrimination range and polarization dependent loss (PDL). The theoretical analysis is supported by a range of experimental investigations and results. The …

Investigation Of Millimetre Wave Generation By Stimulated Brillouin Scattering For Radio Over Fibre Applications, Markus Junker

Doctoral

The rising demand for greater bandwidth and increased flexibility in modern telecommunication systems has lead to increased research activities in the field of Millimetre Wave-Photonics. The combination of an optical access network and the radio propagation of high data-rate signals provides a solution to meet these demands. Such structures are also known as Radio Over Fibre Systems. They implement the optical Millimetre Wave generation in a central station and the transmission of radio waves via a remote antenna unit to the radio cell. The expected data rate is very high, due to the fact that both the optical and the …

Unified Power Quality Conditioner: Protection And Performance Enhancement, Iurie Axente

Doctoral

The proliferation of power electronics-based equipment has produced a significant impact on the quality of electric power supply. Nowadays, much of the equipment is based on power electronic devices, often leading to problems of power quality. At the same time this equipment is typically equipped with microprocessor-based controllers which are quite sensitive to deviations from the ideal sinusoidal line voltage. Conventional power quality mitigation equipment is proving to be inadequate for an increasing number of applications, and this fact has attracted the attention of power engineers to develop dynamic and adjustable solutions to power quality problems. One modern and very …

Unified Power Quality Conditioner For Grid Integration Of Wind Generators, Jayanti Navilgone Ganesh

Doctoral

A Unified Power Quality Conditioner (UPQC) is relatively a new member of the custom power device family. It is a comprehensive custom power device, with integrated shunt and series active filters. The cost of the device, which is higher than other custom power/FACTS devices, because of twin inverter structure and control complexity, will have to be justified by exploring new areas of application where the cost of saving power quality events outweighs the initial cost of installation. Distributed generation (such as wind generation) is one field where the UPQC can find its potential application. There has been a considerable increase …

Structure Property Relationships In Electron Donating Systems For Potential Photovoltaic Applications., Jonathan Moghal

Doctoral

Conjugated polymers are considered to be one-dimensional semiconductors. In conjugated polymers single and double bonds alternatively bond the carbon atoms along the polymer chain. The loosely bound electrons determine the electronic properties of conjugated polymers. In order to utilise the properties of conjugated polymers in terms of a photovoltaic (PV) device application an acceptor material must be added. The acceptor material used in this study is used in buckminsterfullerence (C60). C60 was selected for this purpose due to its size and the fact that it can accept up to six additional electrons. Ultrafast charge transfers from a conducting polymer onto …

Antennas For Portable Communications In The Uwb And Gps Spectra., Giuseppe Ruvio

Doctoral

The thesis describes a study of antennas for solutions in emerging systems. An account of the fundamental principles of these antennas is given together with an outline of the basic electromagnetic theory on which the designs are based. While the main focus is on antennas for Ultra Wideband (UWB) systems, some additional work was carried out on enhancing performance of circularly polarised antennas for satellite navigation systems. The study focussed on the design of highly efficient broadband antennas with particular requirements for size compactness, gain stability, phase-linearity, and the use of low-cost materials. These requirements are particularly important for UWB …

Role Of Covalent Fe-As Bonding In The Magnetic Moment Formation And Exchange Mechanisms In Iron-Pnictide Superconductors, Kirill D. Belashchenko, Vladimir P. Antropov

Nebraska Center for Materials and Nanoscience: Faculty Publications

The electronic origin of the huge magnetostructural effect in layered Fe-As compounds is elucidated using LiFeAs as a prototype. The crucial feature of these materials is the strong covalent bonding between Fe and As, which tends to suppress the exchange splitting. The bonding-antibonding splitting is very sensitive to the distance between Fe and As nuclei. We argue that the fragile interplay between bonding and magnetism is universal for this family of compounds. The exchange interaction is analyzed in real space, along with its correlation with covalency and doping. The range of interaction and itinerancy increase as the Fe-As distance is …

Durability Of Perfluorosulfonic Acid And Hydrocarbon Membranes: Effect Of Humidity And Temperature, Vijay A. Sethuraman, John W. Weidner, Andrew T. Haug, Lesia V. Protsailo

Faculty Publications

The effect of humidity on the chemical stability of two types of membranes [i.e., perfluorosulfonic acid type (PFSA, Nafion 112) and biphenyl sulfone hydrocarbon type, (BPSH-35)] was studied by subjecting the membrane electrode assemblies (MEAs) to open-circuit voltage (OCV) decay and potential cycling tests at elevated temperatures and low inlet-gas relative humidities. The BPSH-35 membranes showed poor chemical stability in ex situ Fenton tests compared to that of Nafion membranes. However, under fuel cell conditions, BPSH-35 MEAs outperformed Nafion 112 MEAs in both the OCV decay and potential cycling tests. For both membranes, (i) at a given temperature, …

Enhanced Dielectric Properties In Single Crystal-Like Bifeo3 Thin Films Grown By Flux-Mediated Epitaxy, S.-H. Lim, M. Murakami, J. H. Yang, S.-Y. Young, Jason R. Hattrick-Simpers, M. Wuttig, L. G. Salamanca-Riba, I. Takeuchi

Faculty Publications

We have fabricated single crystal-like BiFeO₃ (BFO) thin films by flux-mediated epitaxy using pulsed laser deposition(PLD). The Bi–Cu–O flux composition and its thickness were optimized using composition spread, thickness gradient, and temperature gradient libraries. The optimized BFO thin films grown with this technique showed larger grain size of ∼2μm and higher dielectric constant in the range of 260–340 than those for standard PLD grown films. In addition, the leakage current density of the films was reduced by two orders of magnitude compared to that of standard PLD grown films.

Elastic Wave Field Computation In Multilayered Nonplanar Solid Structures: A Mesh-Free Semianalytical Approach, Sourav Banerjee, Tribikram Kundu

Faculty Publications

Multilayered solid structures made of isotropic, transversely isotropic, or general anisotropic materials are frequently used in aerospace, mechanical, and civil structures. Ultrasonic fields developed in such structures by finite size transducers simulating actual experiments in laboratories or in the field have not been rigorously studied. Several attempts to compute the ultrasonic field inside solid media have been made based on approximate paraxial methods like the classical ray tracing and multi-Gaussian beam models. These approximate methods have several limitations. A new semianalytical method is adopted in this article to model elastic wave field in multilayered solid structures with planar or nonplanar …

The Role Of Filler-Matrix Interaction On Viscoelastic Response Of Biomimetic Nanocomposite Hydrogels, Alireza S. Sarvestani, Xuezhong He, Esmaiel Jabbari

Faculty Publications

The effect of a glutamic acid (negatively charged) peptide (Glu6), which mimics the terminal region of the osteonectin glycoprotein of bone on the shear modulus of a synthetic hydorgel/apatite nanocomposite, was investigated. One end of the synthesized peptide was functionalized with an acrylate group (Ac-Glu6) to covalently attach the peptide to the hydrogel phase of the composite matrix. The addition of Ac-Glu6 to hydroxyapatite (HA) nanoparticles (50 nm in size) resulted in significant reinforcement of the shear modulus of the nanocomposite (~100% increase in elastic shear modulus). The reinforcement effect of the Glu6 peptide, a sequence in the terminal region …