Engineering Commons^™

Bs News

Building Services Engineering

No abstract provided.

Information Presentation On Mobile Device For Plant Operations, Raghavendra Rao Polakonda

Browse all Theses and Dissertations

Process control and maintenance systems have been used in the petrochemical and refining industry for long time for improving operator performance and workforce efficiency. However, there is a need to integrate these systems with current technological innovations in a systematic and meaningful manner. Advances in mobile computing, sensor technologies, software algorithms, and computational methods provide the possibility for easy access to information anytime-anywhere. The issues associated with retrieving and reviewing this information directly affects the ability to make timely and quality decisions in high stakes environments like a petrochemical plant where time critical decisions are involved. This research investigates the …

New Heuristic And Metaheuristic Approaches Applied To The Multiple-Choice Multidimensional Knapsack Problem, Chaitr Hiremath

Browse all Theses and Dissertations

The knapsack problem has been used to model various decision making processes. Industrial applications find the need for satisfying additional constraints and these necessities lead to the variants and extensions of knapsack problems which are complex to solve. Heuristic algorithms have been developed by many researchers to solve the variants of knapsack problems. Empirical analysis has been done to compare the performance of these heuristics. Little research has been done to find out why certain algorithms perform well on certain test problems while not so well on other test problems. There has been little work done to gain knowledge of …

The Development Of A Nonlinear Phase-Lock Loop With Adaptive Gain Control Based On Modern Control Theory, Michael D. Myers

Browse all Theses and Dissertations

As the performance of integrated circuits (IC) improve, a more precise clock-signal is needed to regulate their actions. The primary objective of this dissertation is to improve the phase-lock loop (PLL), which is the most common type of clock-generator. A nonlinear phase-lock loop (NPLL) was developed by adding a nonlinear-gain unit to a standard PLL. The NPLL implementation improves performance compared to existing PLLs by demonstrating faster acquisition times and superior jitter performance. The nonlinear-gain is achieved by the use of a fuzzy controller. The fuzzy controller takes in a value and generates outputs based upon the rules that are …

Broad Bandwidth High Resolution Analog To Digital Converters: Theory, Architecture And Implementation, Saiyu Ren

Browse all Theses and Dissertations

Analog to digital converters (ADCs) translate analog quantities, which are characteristic of most phenomena in the "real world" to digital language for a variety of applications including information processing, computing, communication and control systems. The performance of the digital signal processing and communication systems is generally limited by the speed and precision of the digital input signal which is achieved at the interface between analog and digital information. The analog to digital converter (ADC) has become a critical component for advanced telecommunication systems. The desire to move the analog to digital interface closer to the sensor has resulted in more …

Risk Based Analysis And Design Af Stiffened Plates, Heather B. Dwire

Browse all Theses and Dissertations

The traditional Risk Based Design (RBD) process involves designing a structure based on risk estimates obtained during several iterations of an optimization routine. This approach is computationally expensive for large-scale aircraft structural systems. The main objective of this research is to establish a RBD algorithm and produce RBD plots for stiffened plates. Basic steps to check functionality will be done by first analyzing a flat plate for which closed formed equations are available and then moving to more complex geometries like stiffened plates.

Therefore, the concept of RBD plots that can be used for both structural sizing and risk assessment …

Design And Analysis Of A Mach 3 Dual Mode Scramjet Combustor, Christopher Ryan Corbin

Browse all Theses and Dissertations

Low speed operation of a dual mode scramjet engine is important to the development of a two stage to orbit reusable launch vehicle. This study investigates the Mach 3 operation of a dual mode scramjet engine. SRGULL, a one-dimensional cycle code for scramjet engines, and VULCAN, a computational fluid dynamics code capable of solving reacting flows, are used in this study. Staged injection is investigated to allow more heat release at a low flight Mach number condition so that more thrust can be achieved and inlet unstart is avoided. The nominal case has one injector located 1.067 meters downstream of …

Improved Structural Health Monitoring Using Random Decrement Signatures, Oleg V. Shiryayev

Browse all Theses and Dissertations

Detection of structural damage phenomena such as cracks, delaminations, or loose fasteners is important because it increases safety and may allow significant reduction in operational costs. Many structural health monitoring techniques are based on detecting changes in vibration features obtained from the measured response. The technique presented in this work is based on the random decrement signatures calculated from the random response. No knowledge of input signal is required. Random decrement signatures have been used for damage detection purposes in the past. The significance of this work is that it explores the possibility of identifying the type of damage and …

A Framework To Support Spatial, Temporal And Thematic Analytics Over Semantic Web Data, Matthew Steven Perry

Browse all Theses and Dissertations

Spatial and temporal data are critical components in many applications. This is especially true in analytical applications ranging from scientific discovery to national security and criminal investigation. The analytical process often requires uncovering and analyzing complex thematic relationships between disparate people, places and events. Fundamentally new query operators based on the graph structure of Semantic Web data models, such as semantic associations, are proving useful for this purpose. However, these analysis mechanisms are primarily intended for thematic relationships. This dissertation proposes a framework built around the RDF data model for analysis of thematic, spatial and temporal relationships between named entities. …

Effect Of A Graded Layer On The Plastic Dissipation During Mixed-Mode Fatigue Crack Growth On Plastically Mismatched Interfaces, Craig M. Baudendistel

Browse all Theses and Dissertations

Recent work has proposed a dissipated energy theory of fatigue crack growth in layered materials under mixed-mode loading. An inherent assumption of this prior work is that a perfect crack exists along the interface joining the top and bottom layers. The current work extends the approach of previous studies to incorporate a grading of plastic properties between the two layers through parametric finite element modeling with ABAQUS. An elastic-plastic 2D model using 8-node biquadratic elements was used to map the plastic dissipation of a two layer specimen with a grading of plastic properties parallel to the crack face. This property …

Global Optimization Of An Aircraft Thermal Management System Through Use Of A Genetic Algorithm, Christopher T. Allen

Browse all Theses and Dissertations

Optimization algorithms utilize known information about the system to identify solutions that are more efficient and meet the requirements of the user. The algorithms require an objective function, or formula (linear or nonlinear) that models what the user is looking to optimize, in order to begin the search for a more feasible solution. Because optimization problems can involve either linearor non-linear functions, various algorithms have been created that can locate optimum solutions faster depending on the type of objective function being optimized.

This research focuses on optimizing an aircrafts thermal management system by using one such algorithm. This was performed …

Study Of Multi-Modal And Non-Gaussian Probability Density Functions In Target Tracking With Applications To Dim Target Tracking, Peter V. Hlinomaz

Browse all Theses and Dissertations

The majority of deployed target tracking systems use some variant of the Kalman filter for their state estimation algorithm. In order for a Kalman filter to be optimal, the measurement and state equations must be linear and the process and measurement noises must be Gaussian random variables (or vectors). One problem arises when the state or measurement function becomes a multi-modal Gaussian mixture. This typically occurs with the interactive multiple model (IMM) technique and its derivatives and also with probabilistic and joint probabilistic data association (PDA/JPDA) algorithms. Another common problem in target tracking is that the target's signal-to-noise ratio (SNR) …

Real-Time Hilbert Transform And Autocorrelation For Digital Wideband Communication Applications, Murthy, Dilip Srinivasa

Browse all Theses and Dissertations

Digital wideband receiver plays a key role in communication and radar systems, and it is used detect and analyze wide range of radio frequency (RF) signals. A digital Instantaneous Frequency Measurement (IFM) receiver is designed, where implementation of a real-time architecture of a Hilbert transform and autocorrelation algorithm is presented. Real-time architecture performs continuous monitoring and processing of the incoming signal. Prior to the previous one bit design, the input data fed to the Hilbert transform is 8-bit wide at a clock rate of 320 MHz with the input data rate is increased by a factor of eight, an 8-bit …

The Influence Of Thickness On The Complex Modulus Of Air Plasma Sprayed Ceramic Blend Coatings, Jason Edgar Hansel

Browse all Theses and Dissertations

Previous research suggests that damping of metallic beams that have a hard ceramic coating applied on them is proportional to the coating thickness. This indicates that the damping is a volume dependent material property. Since thickness variations are likely in an actual application, it is essential to understand the role that coating thickness plays in damping effectiveness. For this research, a series of tests were conducted using substrate beams of 90 mil Ti-6Al-4V, coated with 3 mils of an air plasma sprayed NiCrAlY bond coat followed by a Titania-Alumina ceramic blend coating applied via air plasma spray in one of …

Modeling Training Effects On Task Performance Using A Human Performance Taxonomy, Douglas P. Meador

Browse all Theses and Dissertations

There is little argument that modern military systems are very complex, both in terms of the resources in time and money to develop them and the infrastructure that is required to produce trained operators. To properly execute human systems integration during the acquisition process, systems built to train operators must be developed that optimize training. Consequently, the training system community would benefit from simulation models that provide the ability to make accurate predictions of training processes, and allow the decision maker to specify an optimum combination of operator performance after training and the cost of that training. The goal of …

The Effect Of Variable Gravity On The Cooling Performance Of A 16-Nozzle Spray Array, Levi J. Elston

Browse all Theses and Dissertations

The objective of this thesis was to investigate the cooling performance of a 16-nozzle spray array, using FC-72 as the working fluid, in variable gravity conditions with additional emphasis on fluid management and flow stability. A flight test experiment was modified to accommodate a 16-nozzle spray array, which was then tested in the parabolic flight trajectory environment of NASA's C-9 reduced gravity aircraft. The 16-nozzle array was designed to cool a 25.4 x 25.4 [mm] area on a thick film resistive heater used to simulate electronic components. Data was taken and reduced as a result of flight tests conducted over …

Implementation Of Simulation For Network Service Delivery Point Capacity Analysis, Tiffany Jill Harper

Browse all Theses and Dissertations

As businesses consolidate and modernize their operations, the impact on their network and computing infrastructure is a major consideration. In this thesis, discrete event simulation is used to show how implementation of an Enterprise Resource Planning (ERP) system can impact network performance and ultimately affect end-users. More specifically, the model simulates the flow of data packets across a network, through a Service Delivery Point (SDP), which is comprised of routers, switches, and firewalls that connect a Local Area Network to a Wide Area Network.

The model was used to run to determine the affect of more network traffic and additional …

Integrated Inductors, Mandar Dilip Kavimandan

Browse all Theses and Dissertations

Integrated inductors, also called spiral inductors, on-chip inductors, or planarinductors, are inseparable part in radio frequency integrated circuits (RFICs). Increasing growth in RFICs from the past few decades has forced study of these components in greater detail. Apart from IC inductors, there are several components mounted on a chip - namely capacitors, resistors, MOSFETs, diodes etc. It is extremely important to understand the electrical and magnetic behavior of all these components. Electrical behavior of these components is easy to understand. However, the real challenge lies in realizing and predicting the magnetic behavior of components, namely, inductors and capacitors. Capacitors have …

Influence Of Voltage Source Pulse Width Modulated Switching And Induction Motor Circuit On Harmonic Current Content, Martin T. Lange

Browse all Theses and Dissertations

The purpose of this research is to present analysis of the harmonic content present in the phase current of a three phase induction motor while being powered by a voltage source pulse-width modulated (PWM) variable speed drive (VSD). First, the topology and circuit of the drive, its operational fundamentals and waveform appearance are presented and discussed. Next, the three-phase induction motor circuit model and operational characteristics are discussed. Finally, the harmonic content present in the induction motor phase current is determined by use of the PSPICE model. The ability of the PSICE simulation to determine harmonic content is established. It …

Microstructural Stability And Thermomechanical Processing Of Boron Modified Beta Titanium Alloys, Balakrishna Cherukuri

Browse all Theses and Dissertations

One of the main objectives during primary processing of titanium alloys is to reduce the prior beta grain size. Producing an ingot with smaller prior beta grain size could potentially eliminate some primary processing steps and thus reduce processing cost. Trace additions of boron have been shown to decrease the as-cast grain size in alpha + beta titanium alloys. The primary focus of this dissertation is to investigate the effect of boron on microstructural stability and thermomechanical processing in beta titanium alloys.

Two metastable beta titanium alloys: Ti-15Mo-2.6Nb-3Al-0.2Si (Beta21S) and Ti-5Al-5V-5Mo-3Cr (Ti5553) with 0.1 wt% B and without boron additions …

A System For Collecting Data To Characterize A Pre-Fall Change In Sway: Development And Proof-Of-Concept Analyses, Amy Renae Sipp

Browse all Theses and Dissertations

Falls account for almost two million emergency department visits per year in the U.S. and are the leading cause of injury deaths among adults 65 years of age and older. Despite efforts to reduce fall risk factors, about one-third of community-dwelling older adults fall each year in the U.S. New methods and devices are needed to prevent falls and to reduce morbidity and mortality related to falls. Presently, it is unknown if there is a measurable change in sway before a person falls. In order to find out, a wireless data acquisition system was developed as no existing tools were …

Elevated Temperature Oxidation Of Boron Modified Ti-6al-4v, Deborah May-Katherine Sweeney

Browse all Theses and Dissertations

The addition of trace amounts (~0.1 wt%) of boron to titanium alloys refines theas-cast grain size by an order of magnitude from 2000μm to 200μm. The reduced grain size has potentially beneficial effects on the processibility of titanium alloys. Reports also indicate that the room temperature corrosion resistance of the boron containing alloys may be substantially greater than conventional titanium alloys. In this study, the effects of boron addition on oxidation resistance are investigated, since conventional titanium alloys have limited corrosion resistance in air above 650°C. The mass gain per unit surface area was measured during elevated temperatures exposed to …

Non-Linear Shunting Of Piezo-Actuators For Vibration Suppression, Anisetti Anusha

Browse all Theses and Dissertations

Vibrations at a resonant frequency lead to catastrophic failure or at the very least, shorten the life span of the structure due to fatigue. These problems force engineers to implement damping techniques. Smart materials have been used over two decades to reduced vibration amplitudes. Recently, there has been much research and development on smart materials and structures.

This work introduces an innovative approach for vibration suppression using passively shunted piezolectric materials. Initially linear circuit elements such as resistors, capacitors, and inductances, or building a non-linear circuit with different impedance designs were used. Instead of such elements, a switched electromechanical shunt …

A Tabu Search Heuristic For Multi-Period Clustering To Rationalize Delivery Operations, Surya Sudha Khambhampati

Browse all Theses and Dissertations

Delivery operations use centralized warehouses to serve geographically distributed customers. Resources (e.g. personnel, trucks, stock, and equipment) are scheduled from the warehouses to distributed locations with the aim of: (a) meeting customer demands and, (b) rationalizing delivery operation costs. My thesis investigates the problem of clustering customers based on their geographical vicinity and their multi-period demands, while optimally scheduling resources. The problem addresses with-and-without capacity constraints of vehicles at the warehouse. This problem is proven to be NP-Hard. Hence, solutions using state-of-the-art exact methods such as branch and bound are not pertinent due to the computation complexity involved. We develop …

Dynamic Pneumatic Muscle Actuator Control System For An Augmented Orthosis, Maria J. Gerschutz

Browse all Theses and Dissertations

This dissertation develops, implements and analyzes a dynamic control system for a pneumatic muscle actuator (PMA) utilizing an augmented orthosis application. The application of PMAs are limited due to poor control capabilities resulting from dynamic nonlinearities. An adequate control system applying an appropriate dynamic pneumatic muscle actuator model increases the potential utility of PMAs in high-force applications including augmented orthotic applications.

The research conducts an initial analysis evaluating the feasibility of PMAs in high-force applications (force assistance with minimal displacement). A computational simulated control system (CSCS) is developed to analyze three different control schemes. The three PMA control schemes (position …

Study Of The Issues Of Computational Aerothermodynamics Using A Riemann Solver, Sean James Henderson

Browse all Theses and Dissertations

This work is part of a project to more accurately model hypersonicflow. A number of issues in hypersonic flow are addressed.

The first issue addressed is that of air properties at increased temperatures. In particular the thermodynamic and transport properties of chemical equilibrium air are found for temperatures up to 30,000 K for a pressure range from 1x10-4 to 100 atm. This work provides properties at slightly higher temperatures for the lower pressure region than can be found in the literature. This work also covers adding equilibrium air chemistry to the computational fluid dynamics computer code known as AVUS.

The …

Simultaneous Rf/Eo Tracking And Characterization Of Dismounts, Jason M. Blackaby

Browse all Theses and Dissertations

This thesis discusses the fusion of radar frequency(RF) data and electro-optical (EO) data for tracking and characterization of dismounts (i.e., humans). Each of these sensor modalities provides unique information about the location, structure, and movement of a dismount. The person's location is tracked on the 2D ground plane using RF data for range measurements and EO data for angle measurements. Using this information, measurements are made on the structure and dynamic motion (gait) of the person. An imaging approach is used to create spatio-temporal activity maps along with a three-dimensional reconstruction of the dismount.

Process Variation-Aware Timing Optimization With Load Balance Of Multiple Paths In Dynamic And Mixed-Static-Dynamic Cmos Logic, Kumar Yelamarthi

Browse all Theses and Dissertations

The semiconductor technology has been advancing rapidly over the past decade to result in the design of several innovative applications. This advancement of technology with the shrinking device has allowed for placement of billions of transistor on a single microprocessor chip. On the other hand, this shrinking device sizes has presented the design engineers with two major challenges: timing optimization at multiple giga-hertz frequencies, and reducing the daunting effects of semiconductor process variations. Failure to account for these process variations often results in loss of design productivity by one generation, and might even result in design failure.

This research presents …

Intelligent Spectrum Sensor Radio, Omer Mian

Browse all Theses and Dissertations

A cognitive radio is a radio with built-in intelligence that makes it able to utilize the radio frequency spectrum more efficiently by adapting to the changing conditions and frequency availability. In this thesis a spectrum sensor radio is designed that detects transmissions in FM band and determine the range of used and unused frequencies within the band. The radio then starts a transmission on a frequency among the available frequencies. This intelligent radio system design is implemented using the Universal Software Radio Peripheral and GNU Radio with a program written in python that uses a number of GNU Radio modules …

Composite Membranes For Proton Exchange Membrane Fuel Cells, Jinjun Shi

Browse all Theses and Dissertations

Proton exchange membrane fuel cells (PEMFCs), often regarded as a green energy source, have become a promising candidate to replace traditional power sources. One of the obstacles toward commercialization of PEM fuel cells is lack of high performance and low cost proton exchange membranes. The objective of this study was to develop and evaluate higher-performance, Nafion-based composite proton exchange membranes that are suitable for operating at higher temperatures (> 85°C).

Proton exchange membranes were prepared by adding silica and heteropolyacids (HPAs) to a proton-conducting polymer matrix, Nafion. The added silica powder particles, either by direct mixing or sol-gel reaction, were …