Engineering Commons^™

Simple - Rethinking The Monolithic Approach To Digital Forensic Software, Craig Valli

Annual ADFSL Conference on Digital Forensics, Security and Law

This paper outlines a collaborative project nearing completion between the sec.au Security Research Group at Edith Cowan University and Western Australian Police Computer Crime Squad. The primary goal of this project is to create a software tool for use by non-technical law enforcement officers during the initial investigation and assessment of an electronic crime scene. This tool will be designed as an initial response tool, to quickly and easily find, view and export any relevant files stored on a computer, establishing if further expert investigation of that computer is warranted. When fully developed, the tool will allow investigators unprecedented real …

The Quest For Stronger, Tougher Materials: A Letter And A Response, Robert O. Ritchie, Yuris A. Dzenis

Nebraska Center for Materials and Nanoscience: Faculty Publications

Dr. Ritchie writes: "The perspective “Structural Nanocomposites” (Y. Dzenis, 25 January, p. 419) describes a quest for improved structural materials and indicates that composites with nanoscale reinforcements would have “exceptional mechanical properties.” Is this true?

Why would reinforcements that are small in size or volume offer any particular benefit over larger-scale reinforcements? As the Perspective correctly asserts, if the composite material is to be used for a small-volume structure, clearly the reinforcements must also be small. In addition, small-volume reinforcements are stronger, as has been known since the early days of research on whiskers (1). In this regard, reinforcement by …

How Virtualized Environments Affect Computer Forensics, Diane Barrett

Annual ADFSL Conference on Digital Forensics, Security and Law

Virtualized environments can make forensics investigation more difficult. Technological advances in virtualization tools essentially make removable media a PC that can be carried around in a pocket or around a neck. Running operating systems and applications this way leaves very little trace on the host system. This paper will explore all the newest methods for virtualized environments and the implications they have on the world of forensics. It will begin by describing and differentiating between software and hardware virtualization. It will then move on to explain the various methods used for server and desktop virtualization. Next, it will describe the …

The Virtual Digital Forensics Lab - Expanding Law Enforcement Capabilities, Mark Mccoy, Sean A. Ensz

Annual ADFSL Conference on Digital Forensics, Security and Law

Law enforcement is attempting to respond to the growing and complex need to examine all manner of digital evidence using stand-alone forensic workstations and limited storage solutions. Digital forensic investigators often find their cases stalled by cumbersome and inflexible technology limiting their effectiveness. The Virtual Digital Forensics Lab (VDFL) is a new concept that applies existing enterprise host, storage, and network virtualization technologies to current forensic investigative methods. This paper details the concept of the VDFL, the technology solutions it employs, and the flexibility it provides for digital forensic investigators.

Keywords: Virtual Digital Forensics, digital forensic investigations, law enforcement, virtual …

Digital Forensic Certification Versus Forensic Science Certification, Nena Lim

Annual ADFSL Conference on Digital Forensics, Security and Law

Companies often rely on certifications to select appropriate individuals in disciplines such as accounting and engineering. The general public also tends to have confidence in a professional who has some kinds of certification because certification implies a standard of excellence and that the individual has expert knowledge in a specific discipline. An interesting question to the digital forensic community is: How is a digital forensic certification compared to a forensic science certification? The objective of this paper is to compare the requirements of a digital forensic certification to those of a forensic science certification. Results of the comparison shed lights …

The Draft Genome Of The Transgenic Tropical Fruit Tree Papaya ( Carica Papaya Linnaeus), Ray Ming, Shaobin Hou, Yun Feng, Qinguyi Yu, Jyothi Thimmapuram

Cyber Center Publications

Papaya, a fruit crop cultivated in tropical and subtropical regions, is known for its nutritional benefits and medicinal applications. Here we report a 3 draft genome sequence of 'SunUp' papaya, the first commercial virus-resistant transgenic fruit tree¹ to be sequenced. The papaya genome is three times the size of the Arabidopsis genome, but contains fewer genes, including significantly fewer disease-resistance gene analogues. Comparison of the five sequenced genomes suggests a minimal angiosperm gene set of 13,311. A lack of recent genome duplication, atypical of other angiosperm genomes sequenced so far may account for the smaller papaya gene number in …

Impact Of Jet Grouting On The Lateral Strength Of Soil Surrounding Driven Pile Foundations, Matthew E. Adsero

Theses and Dissertations

Jet grouting was used to strengthen the soft soil surrounding the piles and the pile cap of two full-scale driven pile foundations. Soilcrete columns, created by jet grouting, were placed underneath the pile cap and surrounding the piles of the first foundation. Two rows of soilcrete columns were placed around the perimeter of one-side of the second. All of the jet grouting took place after construction of the pile caps. Laboratory testing of the soilcrete slurry showed the columns as having a design unconfined compressive strength of 550-650 psi, compared with the native soil strength of only 6-8 psi (850-1150 …

Educational Outreach In The Arctic Regions?, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Educational Outreach in the Arctic Regions?" from April 24, 2008.

Solar 2007: Renewable Energy Disaster Relief Fund Gives A Helping Hand, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

In a disaster, support and utility services are damaged or destroyed leaving people without electricity, water, sanitation, and communication. Thousands of people from emergency management agencies and volunteer organizations are deployed to help after a disaster to provide life support and basic services. In this response effort, energy resources and services are lacking, making recovery efforts difficult in our high-tech world. In response to this problem, the National Energy Foundation and the Florida Solar Energy Center have formed the Renewable Energy Disaster Relief Fund (REDRF).

REDRF will collect donations from the general public, businesses, and various organizations through a variety …

Stabilization And Control Of A Quad-Rotor Micro-Uav Using Vision Sensors, Spencer G. Fowers

Theses and Dissertations

Quad-rotor micro-UAVs have become an important tool in the field of indoor UAV research. Indoor flight poses problems not experienced in outdoor applications. The ability to be location- and movement-aware is paramount because of the close proximity of obstacles (walls, doorways, desks). The Helio-copter, an indoor quad-rotor platform that utilizes a compact FPGA board called Helios has been developed in the Robotic Vision Lab at Brigham Young University. Helios allows researchers to perform on-board vision processing and feature tracking without the aid of a ground station or wireless transmission. Using this on-board feature tracking system a drift stabilization control system …

Real-Time Implementation Of Vision Algorithm For Control, Stabilization, And Target Tracking For A Hovering Micro-Uav, Beau J. Tippetts

Theses and Dissertations

A lightweight, powerful, yet efficient quad-rotor platform was designed and constructed to obtain experimental results of completely autonomous control of a hovering micro-UAV using a complete on-board vision system. The on-board vision and control system is composed of a Helios FPGA board, an Autonomous Vehicle Toolkit daughterboard, and a Kestrel Autopilot. The resulting platform is referred to as the Helio-copter. An efficient algorithm to detect, correlate, and track features in a scene and estimate attitude information was implemented with a combination of hardware and software on the FPGA, and real-time performance was obtained. The algorithms implemented include a Harris feature …

Measurements And Modeling Of Coal Ash Deposition In An Entrained-Flow Reactor, Ryan P. Blanchard

Theses and Dissertations

Coal plays a significant role in meeting the world's need for energy and will continue to do so for many years to come. Economic, environmental, and public opinion are requiring coal derived energy to be cleaner and operate in a more narrow window of operating conditions. Fouling and slagging of heat transfer surfaces continues to be a challenge for maintaining boiler availability and expanding the use of available fuels and operating conditions. The work incorporates existing information in the literature on ash deposition into a User-Defined Function (UDF) for a commercial comprehensive combustion and CFD code. Results from the new …

Parametric Optimization Design System For A Fluid Domain Assembly, Matthew Jackson Fisher

Theses and Dissertations

Automated solid modeling, integrated with computational fluid dynamics (CFD) and optimization of a 3D jet turbine engine has never been accomplished. This is due mainly to the computational power required, and the lack of associative parametric modeling tools and techniques necessary to adjust and optimize the design. As an example, the fluid domain of a simple household fan with three blades may contain 500,000 elements per blade passage. Therefore, a complete turbine engine that includes many stages, with sets of thirty or more blades each, will have hundreds of millions of elements. The fluid domains associated with each blade creates …

Development Of A Miniature Vtol Tail-Sitter Unmanned Aerial Vehicle, Jeffrey V. Hogge

Theses and Dissertations

The design, analysis, construction and flight testing of a miniature Vertical Take-Off and Landing (VTOL) tail-sitter Unmanned Aerial Vehicle (UAV) prototype is presented in detail. Classic aircraft design methods were combined with numerical analysis to estimate the aircraft performance and flight characteristics. The numerical analysis employed a propeller blade-element theory coupled with momentum equations to predict the influence of a propeller slipstream on the freestream flow field, then the aircraft was analyzed using 3-D vortex lifting-line theory to model finite wings immersed in the flow field. Four prototypes were designed, built, and tested and the evolution of these prototypes is …

Real-Time Plasma Controlled Chemistry In A Two-Frequency, Confined Plasma Etcher, Vladimir Milosavljevic, Albert R. Ellingboe, Cezar Gaman, John V. Ringwood

Articles

The physics issues of developing model-based control of plasma etching are presented. A novel methodology for incorporating real-time model-based control of plasma processing systems is developed. The methodology is developed for control of two dependent variables (ion flux and chemical densities) by two independent controls (27 MHz power and O2flow). A phenomenological physics model of the nonlinear coupling between the independent controls and the dependent variables of the plasma is presented. By using a design of experiment, the functional dependencies of the response surface are determined. In conjunction with the physical model, the dependencies are used to deconvolve the sensor …

High-Rise As Only Answer Is Tall Tale, Lorcan Sirr, Conor Skehan

Media

No abstract provided.

Slip Boundary Conditions For Shear Flow Of Polymer Melts Past Atomically Flat Surfaces, Anoosheh Niavarani, Nikolai V. Priezjev

Mechanical and Materials Engineering Faculty Publications

Molecular dynamics simulations are carried out to investigate the dynamic behavior of the slip length in thin polymer films confined between atomically smooth thermal surfaces. For weak wall-fluid interactions, the shear rate dependence of the slip length acquires a distinct local minimum followed by a rapid growth at higher shear rates. With increasing fluid density, the position of the local minimum is shifted to lower shear rates. We found that the ratio of the shear viscosity to the slip length, which defines the friction coefficient at the liquid/solid interface, undergoes a transition from a nearly constant value to the power …

The Effect Of Elevated Temperature On The Fretting Fatigue Behavior Of Nickel Alloy In-100, John F. Ownby

Theses and Dissertations

This thesis studied the effect of elevated temperature (600 C) on the fretting fatigue behavior of IN-100. First, fretting and plain fatigue S-N curves were determined over a large range of applied stress at an identical stress ratio of 0.03 at 600 C and for fretting tests, with a constant contact load. The partial slip condition was verified by using hysteresis between shear force and axial stress techniques. The contact width and the crack initiation location were observed for all of the fretting specimens. The contact widths were consistent with expected values and the crack initiation location was at the …

Nrcs Curve Number Calibration Using Usgs Regression Equations, Charlotte M. Mecham

Theses and Dissertations

The Curve Number (CN) method of estimating the direct runoff response to rainfall events was originally developed in the 1950's primarily for agricultural purposes in the mid-western United States. The accuracy of the CN method is greatly affected by variation of the soil type and land use of the region. Curve Numbers developed for a given region are not appropriate for application in other regions. In order to produce reliable, consistent results, Curve Numbers must be calibrated for the area in which the CN method is to be applied. Calibration is ideally accomplished by direct measurement using several rain and …

Gold Nanorod-Mediated Photothermolysis Induces Apoptosis To Macrophages Via Damage Of Mitochondria, Ling Tong, Ji-Xin Cheng

Birck Poster Sessions

Alterations in macrophage functions contribute to a variety of autoimmune and inflammatory diseases. Diagnosis and eradication of activated macrophages is becoming a valid pharmaceutical target. In this work, gold nanorods conjugated with arginine-rich peptides were applied as theragonosis agents to detect activated macrophages via two-photon luminescence (TPL) and subsequent eradicate through optical hyperthermia. Functionalized gold nanorods could be selectively internalized by activated macrophages in live animals 0.5 h after intraperitoneal (i.p.) injection. Apoptosis of macrophage was induced under proper irradiation conditions to reduce secondary inflammation, through mitochondria-dependent pathway.

Exploring The Common Design Space Of Dissimilar Assembly Parameterizations For Interdisciplinary Design, Brady M. Larson

Theses and Dissertations

The use of parametric CAD models in engineering, analysis, and optimization has greatly enhanced the effectiveness and efficiency of the product development process. Parametric models provide an attractive avenue for expansive design exploration. There still exists, however, a great challenge for products requiring design input from multiple disciplines. The collaboration of engineering disciplines can be hampered by many factors including: competing design objectives, communication of design changes, the use of different design and analysis software, and different geometry definitions. These obstacles become compounded when developing products at the assembly level. The use of solid parametric assembly models is not readily …

Measurement Of Oxygen Saturation In The Retina With A Spectroscopic Sensitive Multi Aperture Camera, Jessica C. Ramella-Roman, Scott A. Mathews, Haripriya Kandimalla, Afshin Nabili, Donald D. Duncan, Salvatore A. D'Anna, Syed M. Shah, Quan D. Nguyen

Electrical and Computer Engineering Faculty Publications and Presentations

We introduce a new multi aperture system capable of capturing six identical images of the human fundus at six different spectral bands. The system is based on a lenslet array architecture and is well suited for spectroscopy application. The multi-aperture system was interfaced with a fundus camera to acquire spectroscopic sensitive images of the retina vessel and ultimately to calculate oxygen saturation in the retina in vivo. In vitro testing showed that the system is able to accurately reconstruct curves of partially oxygenated hemoglobin. In vivo testing on healthy volunteers was conducted and yielded results of oxygen saturation similar to …

Generating Cad Parametric Features Based On Topology Optimization Results, William R. Blattman

Theses and Dissertations

Shape optimization has become an important tool in industry to minimize weight and generate new designs. At the same time, companies are turning to CAD-centric design strategies where robust parametric CAD models are used to generate new designs and part-families of current designs, as well as the tooling and manufacturing procedures. However, due to its complexity, the optimal topology results are often discarded or recreated by hand into a CAD model. From a design stand point, the results can be improved with the use of manufacturing constraints on the shape optimization process. These constraints improve the manufacturability based on common …

Parallel Implementation Of High-Speed, Phase Diverse Atmospheric Turbulence Compensation Method On A Neural Network-Based Architecture, William W. Arrasmith, Sean F. Sullivan

Electrical Engineering and Computer Science Faculty Publications

Phase diversity imaging methods work well in removing atmospheric turbulence and some system effects from predominantly near-field imaging systems. However, phase diversity approaches can be computationally intensive and slow. We present a recently adapted, high-speed phase diversity method using a conventional, software-based neural network paradigm. This phase-diversity method has the advantage of eliminating many time consuming, computationally heavy calculations and directly estimates the optical transfer function from the entrance pupil phases or phase differences. Additionally, this method is more accurate than conventional Zernike-based, phase diversity approaches and lends itself to implementation on parallel software or hardware architectures. We use computer …

Ceas E-News 04.15.2008, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

CEAS leads the way at WMU's first Science Olympiad

Subsidence Measurement And Dsm Extraction Of Ifsar Data Using Anisotropic Diffusion And Wavelet Denoising Filters, Kenneth Sartor, Josef De Vaughn Allen, Emile Ganthier, Mark Rahmes, Gnana Bhaskar Tenali, Samuel Peter Kozaitis

Electrical Engineering and Computer Science Faculty Publications

The most commonly used smoothing algorithms for complex data processing are low pass filters. Unfortunately, an undesired side effect of the aforementioned techniques is the blurring of scene discontinuities in the interferogram. For Digital Surface Map (DSM) extraction and subsidence measurement, the smoothing of the scene discontinuities can cause inaccuracy in the final product. Our goal is to perform spatially non-uniform smoothing to overcome the aforementioned disadvantages. We achieve this by using an Anisotropic Non-Linear Diffuser (ANDI). Here, in this paper we will show the utility of ANDI filtering on simulated and actual Interferometric Synthetic Aperture Radar (IFSAR) data for …

Design Of Radio-Frequency Filters And Oscillators In Deep-Submicron Cmos Technology, Haiqiao Xiao

Dissertations and Theses

Radio-frequency filters and oscillators are widely used in wireless communication and high-speed digital systems, and they are mostly built on passive integrated inductors, which occupy a relative large silicon area. This research attempted to implement filters and oscillators operating at 1-5 GHz using transistors only, to reduce the circuits’ area. The filters and oscillators are designed using active inductors, based on the gyrator principle; they are fabricated in standard digital CMOS technology to be compatible with logic circuits and further lower the cost. To obtain the highest operating frequency, only parasitic capacitors were used.

Two new active-inductor circuits are derived …

Temporal Variability Corrections For Advanced Microwave Scanning Radiometer E (Amsr-E) Surface Soil Moisture: Case Study In Little River Region, Georgia, U. S., Minha Choi, Jennifer M. Jacobs

Civil & Environmental Engineering

Statistical correction methods, the Cumulative Distribution Function (CDF) matching technique and Regional Statistics Method (RSM) are applied to adjust the limited temporal variability of Advanced Microwave Scanning Radiometer E (AMSR-E) data using the Common Land Model (CLM). The temporal variability adjustment between CLM and AMSR-E data was conducted for annual and seasonal periods for 2003 in the Little River region, GA. The results showed that the statistical correction techniques improved AMSR-E's limited temporal variability as compared to ground-based measurements. The regression slope and intercept improved from 0.210 and 0.112 up to 0.971 and -0.005 for the non-growing season. The R-2 …

2008 - The Thirteenth Annual Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Thirteenth Annual Symposium of Student Scholars, held on April 14, 2008. Includes abstracts from the presentations and posters.

Water-Soluble Iron Oxide Nanoparticles For Nanomedicine, Christy L. Cooper, Lisa M. Reece, J Key, Donald E. Bergstrom, James F. Leary

Birck Poster Sessions

Monodisperse iron oxide nanoparticles (MION) are easily synthesized in organic solvents for industrial applications. However, biological applications require that the particles by readily dispersed in aqueous solutions. To improve their dispersion in aqueous solution, MION particles can be conjugated to water soluble polymers. These water soluble particles can then be used for nanomedicine, which utilizes nanometer scale constructs to treat diseases at the cellular level. Here we report the synthesis of a monodisperse iron oxide nanoparticle construct for breast cancer applications.