Engineering Commons^™

Eigenvalue Optimization And Its Applications In Buckling And Vibration, Srinivas Gopal Krishna

LSU Doctoral Dissertations

Eigenvalue problems are of immense interest and play a pivotal role not only in many fields of engineering but also in pure and applied mathematics. An in-depth understanding of this class of problems is a pre-requisite for vibration and buckling analyses of structures. Design optimization of structures to prevent failure due to instability (bucking) and vibration introduces the problem of determining optimal physical parameters such that load carrying capacity or the fundamental natural frequency is maximized. A classical example of such problems is the Lagrange problem of determining the shape of the strongest column against buckling. The primary objective of …

Flow And Distribution Of Water In Fractional Wettability Unsaturated Porous Media, Zaydoun Turkey Abusalem

LSU Doctoral Dissertations

In recent years, interest in fluid flow and transport in the unsaturated zone has gained more attention, due to growing concerns that the quality of the subsurface environment is adversely affected by agricultural, industrial, and municipal activities. The wettability properties (e.g., water repellency) of soil in the unsaturated zone play an important role in determining fluid movement and ultimate distributions. A number of studies have shown that preferential flow and spatially variable moisture content is likely to occur in water repellant soils. Development of appropriate constitutive relations for numerical modeling becomes even more difficult in systems that contain water repellant …

Clarifications Of Rule 2 In Teaching Geometric Dimensioning And Tolerancing, Cheng Lin, Alok Verma

Engineering Technology Faculty Publications

Geometric dimensioning and tolerancing is a symbolic language used on engineering drawings and computer generated three-dimensional solid models for explicitly describing nominal geometry and its allowable variation. Application cases using the concept of Rule 2 in the Geometric Dimensioning and Tolerancing (GD&T) are presented. The rule affects all fourteen geometric characteristics. Depending on the nature and location where each feature control frame is specified, interpretation on the applicability of Rule 2 is quite inconsistent. This paper focuses on identifying the characteristics of a feature control frame to remove this inconsistency. A table is created to clarify the confusions for students …

Introduction: Special Issue For The Selected Papers In The Fourth International Conference On Intelligent Multimedia Computing And Networking (Immcn) 2005, Chong-Wah Ngo, Hong-Va Leong

Research Collection School Of Computing and Information Systems

This special issue introduces seven papers selected from the IMMCN’ 2005, covering a wide range of emerging topics in multimedia field. These papers receive high scores and good comments from the reviewers in their respective areas of intelligent and nextgeneration networking, technology and application, multimedia coding, content analysis and retrieval. The seven papers are extended to 20 pages and then gone through another review process before the final publication. In this issue, we have two papers for video streaming, two papers for multimedia applications, one paper for video coding, and two papers for image and video retrieval.

Oil Bypassing By Water Invasion To Wells: Mechanisms And Remediation, Juan Carlos Hernandez

LSU Doctoral Dissertations

This study addresses oil bypassing caused by water invasion to wells in edge and bottom water-drive oil reservoirs – a significant problem worldwide. It is shown that the amount of by-passed (not recovered) oil is significant and could be predicted analytically and reduced by modifying well’s completion. A large statistical sample from the population of possible reservoir-well systems with edge and bottom-water has been created theoretically using several databases of actual reservoirs properties worldwide. Dimensional analysis allowed converting reservoir properties distributions into dimensionless group distributions. Then, the amount of by-passed oil was correlated with the dimensionless groups using designed experiments …

Mechanistic Modeling Of An Underbalanced Drilling Operation Utilizing Supercritical Carbon Dioxide, Faisal Abdullah Aladwani

LSU Doctoral Dissertations

Mechanistic modeling of an underbalanced drilling operation using carbon dioxide has been developed in this research. The use of carbon dioxide in an underbalanced drilling operation eliminates some of the operational difficulties that arises with gaseous drilling fluids, such as generating enough torque to run a downhole motor. The unique properties of CO₂, both inside the drill pipe and in the annulus are shown in terms of optimizing the drilling operation by achieving a low bottomhole pressure window. Typically CO₂ becomes supercritical inside the drill pipe at this high density; it will generate enough torque to run …

Production Data Analysis Of Shale Gas Reservoirs, Adam Michael Lewis

LSU Master's Theses

Hydrocarbon resources from unconventional shale gas reservoirs are becoming very important in the United States in recent years. Understanding the effects of adsorption on production data analysis will increase the effectiveness of reservoir management in these challenging environments. The use of an adjusted system compressibility proposed by Bumb and McKee (1988) is critical in this process. It allows for dimensional and dimensionless type curves to be corrected at a reasonably fundamental level, and it breaks the effects of adsorption into something that is relatively simple to understand. This coupled with a new form of material balance time that was originally …

Biodegradation And Characterization Of A Bio-Based Polyester, Benjamin Edward Stevens

LSU Master's Theses

Anaerobic biodegradation in sewage sludge and aerobic biodegradation in compost of polyhydroxybutyrate (PHB) were investigated to determine degradation kinetics and identify changes in polymer properties. To determine the impact of a natural plasticizer on biodegradation, tributyl citrate (TBC) was blended with some test specimens. For comparison to another bioplastic, polylactic acid (PLA) was biodegraded in the anaerobic study. Evolved gaseous carbon was measured to assess biodegradability according to ASTM standards D5210 and D5338. Mass loss experiments were performed to facilitate determination of degradation kinetics. Melt-pressed plates of the bioplastic with five different initial mass-to-surface-area ratios (plate thicknesses of 0.24, 0.5, …

An Investigation Of The Frictional And Thermal Behavior Of Oscillatory Sliding Line Contacts, Mongi Mansouri

LSU Doctoral Dissertations

This research deals with an experimental and numerical investigation of the frictional and thermal behavior of pin-bushing pairs, operating at reciprocating sliding motion or under heavy loads. Large interfacial temperatures developed due to frictional heating can cause failure. Therefore, numerical prediction and analysis of the surface temperature under various operating conditions are important. Laboratory tests using a pin-bushing tester provided measurements of the friction coefficient and temperature. Hard coated and plain (uncoated) bushings, both made of induction hardened stainless steel, were tested. Lower coefficient of friction and surface temperature were observed in the case of the coated bushing. In the …

Studies On The Heat/Mass Transfer Characteristics And Fluid Structure In A Square Internal Cooling Channel With Dimpled Surfaces, Fuguo Zhou

LSU Master's Theses

Experimental and numerical studies of heat/mass transfer on the dimpled surfaces in square channels are performed. The naphthalene sublimation method is employed in the experimental study. First, in a two-passage rotating channel, circle dimple matrices are cast on the leading and trailing walls in both the inlet and outlet of the serpentine channel. The experiments are carried out with Reynolds number of 7,000 and 21,000, and with Rotation number of 0 and 0.2. The dimpled walls lead to heat/mass transfer enhancements over smooth surfaces both in the stationary case and in the rotating case. In the stationary case, the dimple …

Optimization For Software Release And Crash, Tanvir Khan

LSU Master's Theses

Software testing is a process to detect faults in the completeness and quality of developed computer software. Testing is a key process in assuring quality by identifying defects in software, and possibly fixing them, before it is delivered to end-users. A major decision to make during this software testing is, to determine whether to continue testing and eventually releasing the software, or when to stop the test and ‘crash’ it. Such a decision needs to be made to optimally balance the tradeoff between the cost of development and the reliability of the software. In this paper, a new optimal strategy …

Passive Alignment Of Micro-Fluidic Chips Using The Principle Of Elastic Averaging, Sitanshu Gurung

LSU Master's Theses

This thesis presents a novel design for a passive alignment feature for vertically stacking chips in a micro fluidic device. Each chip is the size of a standard microscopic slide (75mm—25mm) and is a highly specialized functional unit designed and fabricated to process fluidic samples. The fluidic samples in the device flows from one chip to another using inter connecting holes 500μm-100μm in diameter. Hence an alignment of better than 100μm between chips is necessary to allow for the interconnecting holes to overlap so as to provide with a path for the fluid to flow. The feature to be used …

Data Compression With Application To Geo-Location, William Perkins

LSU Master's Theses

A common way to locate an emitter within a wireless sensor network requires the estimation of time-difference-of-arrival (TDOA) parameters using data collected by a set of spatially separated sensors. Compressing the data that is shared among the sensors can provide tremendous savings in terms of the energy and transmission latency. Traditional MSE and perceptual based data compression schemes fail to accurately capture the effects of compression on the TDOA estimation task; therefore, it is necessary to investigate compression algorithms suitable for TDOA parameter estimation. This thesis explores the effects of data compression on TDOA parameter estimation accuracy. The first part …

Measuring Skeletal Kinematics With Accelerometers On The Skin Surface, Kevin Curtis Ayer

LSU Master's Theses

The most common motion analysis method uses cameras to track the position of markers on bodily surfaces over time. Although each species has a common skeletal frame to reference recorded motions, the soft tissue covering each is not rigid. Markers, therefore, experience motion relative to the bone and do not accurately portray underlying bone activity. This limits clinical use of motion studies and the understanding of joint motion. Use of MEMS accelerometers for removing soft tissue artifact, motion relative to the bone, from surface measurements and determining the position of the underlying bone was investigated. An animal limb was modeled …

Potential Of A Suite Of Robot/Computer-Assisted Motivating Systems For Personalized, Home-Based, Stroke Rehabilitation, Michelle J. Johnson, Xin Feng, Laura M. Johnson, Jack M. Winters

Electrical and Computer Engineering Faculty Research and Publications

Background

There is a need to improve semi-autonomous stroke therapy in home environments often characterized by low supervision of clinical experts and low extrinsic motivation. Our distributed device approach to this problem consists of an integrated suite of low-cost robotic/computer-assistive technologies driven by a novel universal access software framework called UniTherapy. Our design strategy for personalizing the therapy, providing extrinsic motivation and outcome assessment is presented and evaluated.

Methods

Three studies were conducted to evaluate the potential of the suite. A conventional force-reflecting joystick, a modified joystick therapy platform (TheraJoy), and a steering wheel platform (TheraDrive) were tested separately with …

Experimental Study For The Conditions Of Analog Switching In Ferroelectric Liquid Crystal Cells, V. Manjuladevi, Yuri Panarin, J.K. Vij

Articles

The authors study the effect of the spontaneous polarization (PS) of a ferroelectric liquid crystal mixture with compensated helix and of the thickness of the alignment layer (da) on the analog switching in a cell. The quality of analog switching is established in terms of its contrast ratio, texture in the dark state, and the electrostatic energy. The latter approximates to PS 2da for da

Influence Of Electric Field And Light On An Easy Axis Of Nlc Confined By Rectangular Channel At Weak Surface Anchoring, S.V. Pasechnik, A.V. Dubtsov, Yuri Panarin, D.V. Shmeliova, V.A. Tsvetkov, V.G. Chigrinov

Articles

We present new experimental results on combined action of light and electric field on a nematic liquid crystal in a rectangular channel at a weak surface anchoring. The first experimental study of slow surface dynamics at combined action of electric field and polarized light in new experimental geometry was performed. Influence of polarized light on spatial twist-like deformation of a director field induced by electric field was established.

Discontinuous Change In The Smectic Layer Thickness In Ferrielectric Liquid Crystals, V. P. Panov, J. K. Vij, Yuri Panarin, C. Blanc, V. Lorman, J. W. Goodby

Articles

The temperature dependence of the thickness of thick free-standing films is studied using a high-resolution film thickness measurement technique. A small discontinuity in the temperature dependence of the smectic layer thickness at every phase transition between ferro-, ferri-, and antiferroelectric phases is observed. We show that the major contribution to it arises from a change in the smectic tilt angle.

Pure Non-Blocking Lc Based Matrix Optical Switch For All-Optical Fibre Networks, Yuri Panarin, V. Alex

Articles

New pure non-blocking matrix optical switch scheme for fiber networks is presented. The optical switch is based on conventional LCD technology, where the each pixel controls the polarization state of the light beam. The suggested switch offers several advantages over the conventional cross-point architecture such as: cost; complexity; size; adjustment; and optical performance

Optical Performance Of Non-Blocking 4x4 Optical Switch: Simulation And Experiment, V. Alex, A. Dubtsov, Yuri Panarin, T. Wilkinson

Articles

A prototype of pure non-blocking 4x4 optical LC switch was designed and built. This switch is based on conventional LCD technology, where the each pixel controlled the polarization state of the light beam. An addressing algorithm was described. The optical performance of the switch, such as cross-talk and insertion loss, was simulated and experimentally studied. The suggested approach offers several advantages over the conventional cross-point architecture such as: cost; complexity; size; adjustment; and optical performance.

Increasing Effectiveness Of Public Private Partnerships In The Irish Construction Industry, Louis Gunnigan

Doctoral

By 2003 the first Irish Public Private Partnership (PPP) projects had reached the operational stage. Media reports were emerging of significant differences in the effectiveness of these projects.

This research set out to find a means by which effectiveness of PPPs could be increased and to develop a model that would assist PPP practitioners with this task in the future. Through a literature review, the Irish PPP process was mapped, the changes encountered in the introduction of PPP were investigated and a conceptual model – based on a traditional process model - was proposed. The model was tested by examining …

Realising Electronic Tendering In The Irish Construction Industry, Alan V. Hore

Conference papers

No abstract provided.

Efficiency Gains To Be Won Through The Introduction Of Electronic Tendering In The Construction Industry, Alan V. Hore, Roger West

Conference papers

The tendering process predominantly adopted in the Irish construction industry is largely paper-dependent. However, the increase in the availability of high speed Information Communications Technology (ICT) has meant that construction consultants can disseminate this information more cost effectively in an electronic format. The aim of this paper is to present a status report on an industry-led network project currently being undertaken by the Construction Information Technology Alliance (CITA) in Ireland. This project aims to demonstrate how greater effectiveness and efficiency can be applied to the tendering process by the application of ICT already used widely in other industries. The status …

Data Mining Methods Applied To Flight Operations Quality Assurance Data: A Comparison To Standard Statistical Methods, Alan J. Stolzer, Carl Halford

Publications

"In a previous study, multiple regression techniques were applied to Flight Operations Quality Assurance-derived data to develop parsimonious model(s) for fuel consumption on the Boeing 757 airplane. The present study examined several data mining algorithms, including neural networks, on the fuel consumption problem and compared them to the multiple regression results obtained earlier. Using regression methods, parsimonious models were obtained that explained approximately 85% of the variation in fuel flow. In general data mining methods were more effective in predicting fuel consumption. Classification and Regression Tree methods reported correlation coefficients of .91 to .92, and General Linear Models and Multilayer …

Quantifying Kinematics Of Purposeful Movements To Real, Imagined, Or Absent Functional Objects: Implications For Modelling Trajectories For Robot-Assisted Adl Tasks, Kimberly J. Wisneski, Michelle J. Johnson

Biomedical Engineering Faculty Research and Publications

Background

Robotic therapy is at the forefront of stroke rehabilitation. The Activities of Daily Living Exercise Robot (ADLER) was developed to improve carryover of gains after training by combining the benefits of Activities of Daily Living (ADL) training (motivation and functional task practice with real objects), with the benefits of robot mediated therapy (repeatability and reliability). In combining these two therapy techniques, we seek to develop a new model for trajectory generation that will support functional movements to real objects during robot training. We studied natural movements to real objects and report on how initial reaching movements are affected by …

Predicting Class Life Cycle Maintenance Effort Based On Class Complexity, Lindsey B. Hays

UNF Graduate Theses and Dissertations

In the software industry today many programmers spend countless hours maintaining existing Java programs. The cost of code maintenance affects a company in many ways such as the budget, time management and resources. Making management decisions regarding these issues could be assisted, if maintenance cost of Java classes could be predicted.

The goal of this thesis was to create a new model predicting the maintenance effort based on the Java class complexity. It seems clear the complexity of a Java class can directly relate to the amount of time it will take to perform maintenance on the class.

To develop …

Citax: Defining Xml Standards For Data Exchange In The Construction Industry Supply Chain, Alan V. Hore, Roger West

Conference papers

The current methods of ordering, delivering and invoicing of products in the construction industry is enormously inefficient, with vast quantities of paperwork, duplication of effort, scanning, re-keying and resolving mismatches between invoices, delivery dockets and purchase orders. The purpose of this paper is to introduce the Construction IT Alliance eXchange (CITAX) project and, in particular, to outline the work carried out-to-date by a special interest group within the project. They are seeking to define a universal set of eXtensible Mark-Up Language (XML) message standards that will allow suppliers and contractors to exchange information with each other in supply chain activity. …

Use Of The Wfg Toolkit And Pisa For Comparison Of Moeas, Lucas Bradstreet, Luigi Barone, Lyndon While, Simon Huband, Philip Hingston

Research outputs pre 2011

Understanding the behaviour of different optimisation algorithms is important in order to apply the best algorithm to a particular problem. The WFG toolkit was designed to aid this task for multi-objective evolutionary algorithms (MOEAs), offering an easily modifiable framework that allows practitioners the ability to test different features by "plugging" in different forms of transformations. In doing so, the WFG toolkit provides a set of problems that exhibit a variety of different characteristics. This paper presents a comparison between two state of the art MOEAs (NSGA-II and SPEA2) that exemplifies the unique capabilities of the WFG toolkit. By altering the …

Passive And Active Optical Bit-Pattern Recognition Structures For Multiwavelength Optical Packet Switching Networks, Muhsen Aljada, Kamal Alameh

Research outputs pre 2011

Next generation High-Speed optical packet switching networks require components capable of recognising the optical header to enable on-the-fly accurate switching of incoming data packets to their destinations. This paper experimentally demonstrates a comparison between two different optical header recognition structures; A passive structure based on the use of Fiber Bragg Gratings (FBGs), whereas the active structure employs Opto-VLSI processors that synthesise dynamic wavelength profile through digital phase holograms. The structures are experimentally demonstrated at 10Gbps. Performance comparison between the two structures is also discussed. These optical header recognition structures are attractive for multiwavelength optical network and applications.

Optimal Layout Of Multicast Groups Using Network Embedded Multicast Security In Ad Hoc Sensor Networks, Richard R. Brooks, Brijesh Pillai, Michele C. Weigle, Matthew Pirretti

Computer Science Faculty Publications

This paper considers the security of sensor network applications. Our approach creates multicast regions that use symmetric key cryptography for communications. Each multicast region contains a single keyserver that is used to perform key management and maintain the integrity of a multicast region. Communications between two multicast regions is performed by nodes that belong to both regions. To ease the network management burden, it is desirable for the networks to self-organize into regions and dynamically select their keyservers. This paper shows how to determine the number of keyservers (k) to use and the size in the number of hops (h) …