Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2007

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 1981 - 2010 of 3831

Full-Text Articles in Engineering

Modeling Acoustic Effects On Shear Coaxial Jet Flow Utilizing Molecular Dynamic Simulation, Jermaine S. Sailsman Mar 2007

Modeling Acoustic Effects On Shear Coaxial Jet Flow Utilizing Molecular Dynamic Simulation, Jermaine S. Sailsman

Theses and Dissertations

The purpose of this research is to determine if acoustical effects on a coaxial shear injection jet flow can be modeled through the use of molecular dynamic simulation. Molecular dynamic simulations model flows as a group of interacting particles. The flow in this research was simulated using nitrogen molecules. The initial task involved achieving effective geometry for a simulated coaxial jet. The coaxial jet geometry was driven by the desire for simulations to operate in the continuum regime, which requires very low Knudsen numbers. Three outer to inner jet ratios of 0.0, 1.0, and 6.0 were examined with the inner …

Go to article

Optical Tracking For Relative Positioning In Automated Aerial Refueling, James H. Spencer Mar 2007

Optical Tracking For Relative Positioning In Automated Aerial Refueling, James H. Spencer

Theses and Dissertations

An algorithm is designed to extract features from video of an air refueling tanker for use in determining the precise relative position of a receiver aircraft. The algorithm is based on receiving a known estimate of the tanker aircraft's position and attitude. The algorithm then uses a known feature model of the tanker to predict the location of those features on a video frame. A corner detector is used to extract features from the video. The measured corners are then associated with known features and tracked from frame to frame. For each frame, the associated features are used to calculate …

Go to article

Spot Friction Welding Of Ultra High-Strength Automotive Sheet Steel, Jack H. Sederstrom Mar 2007

Spot Friction Welding Of Ultra High-Strength Automotive Sheet Steel, Jack H. Sederstrom

Theses and Dissertations

Spot friction welding (SFW) was performed on ultra high strength steel (UHSS) steel sheet commonly used in automobile manufacturing. Alloys studied included DP780, DP780EG, DP980, and DF140T sheet steel of varying thickness from 1.2 mm to 1.4 mm. Welding was accomplished using a PCBN standard tool. Weld strengths were then compared to a proposed AWS standard. Initial hardness readings were taken in cross sectioned samples. Grain structure in a SFW is presented. Resistance spot welds were created in three steels. This study focuses on the strength of SFW joints as compared to traditional resistance spot welding (RSW) in welding like …

Go to article

Development Of An Efficient Solar Powered Unmanned Aerial Vehicle With An Onboard Solar Tracker, Troy Dixon Tegeder Mar 2007

Development Of An Efficient Solar Powered Unmanned Aerial Vehicle With An Onboard Solar Tracker, Troy Dixon Tegeder

Theses and Dissertations

Methods were developed for the design of a solar powered UAV capable of tracking the sun to achieve maximum solar energy capture. A single-axis solar tracking system was designed and constructed. This system autonomously rotated an onboard solar panel to find the angle of maximum solar irradiance while the UAV was airborne. A microcontroller was programmed and implemented to control the solar tracking system. A solar panel and an efficient airframe capable of housing the solar tracking system was designed and constructed. Each of these subsystems was tested individually with either ground or flight tests. Ultimately, the final assembled system …

Go to article

Analysis Of Stacked Rotated Gratings, Gregory P. Nordin, P. C. Deguzman, J. Jiang Mar 2007

Analysis Of Stacked Rotated Gratings, Gregory P. Nordin, P. C. Deguzman, J. Jiang

Faculty Publications

We study the rigorous design and analysis of stacked rotated gratings (SRGs) for novel photonic devices. A concept of sampling frequency is proposed to systematically design SRGs. With the help of a rectangular sampling lattice, we extend the standard 3D rigorous coupled-wave analysis (RCWA) algorithm to the analysis of SRGs. The resultant SRG-RCWA algorithm can be used to exactly analyze SRGs that have grating parameters that match the Fourier expansion represented by the sampling lattice. SRGs that do not fall in this category can often still be closely approximated with our approach. The SRG-RCWA algorithm has been successfully applied to …

Go to article

Phase Diversity And Polarization Augmented Techniques For Active Imaging, Peter M. Johnson Mar 2007

Phase Diversity And Polarization Augmented Techniques For Active Imaging, Peter M. Johnson

Theses and Dissertations

A multi-frame active phase diversity imaging (APDI) algorithm is derived for coherent light statistics and demonstrated. In addition to conventional focal-plane and diversity-plane data, a statistical description for pupil-plane (PP) intensity is formed and included in the derivation. The algorithm is implemented and characterized via Monte Carlo simulation. Analysis shows that it's robust, insensitive to detection noise for SNR ? 7, performs well for SNR's as low as 2, and that the effect of system configuration on optimal parameters is minimal. Furthermore, introduction of PP data results in a 60% better reconstruction from dynamically aberrated data than obtained using only …

Go to article

Design, Construction, And Validation Of The Afit Small Scale Combustion Facility And Section Model Of The Ultra-Compact Combustor, Wesley S. Anderson Mar 2007

Design, Construction, And Validation Of The Afit Small Scale Combustion Facility And Section Model Of The Ultra-Compact Combustor, Wesley S. Anderson

Theses and Dissertations

The AFIT small-scale combustion facility is complete and its first experiment designed and built. Beginning with the partially built facility, detailed designs have been developed to complete the laboratory in order to run small-scale combustion experiments at atmospheric pressure. A sectional model of the Ultra-Compact Combustor has also been designed and built. Although the lab's specific design intent was to study the UCC's cavity-vane interaction, facility flexibility has also been maintained for future work. The design enabled the completion of liquid fuel and air delivery systems, power and control systems, and test equipment. The design includes failsafe operation, remote control, …

Go to article

An Analysis Of Aircraft Handling Quality Data Obtained From Boundary Avoidance Tracking Flight Test Techniques, Jason D. Dotter Mar 2007

An Analysis Of Aircraft Handling Quality Data Obtained From Boundary Avoidance Tracking Flight Test Techniques, Jason D. Dotter

Theses and Dissertations

Cooper-Harper ratings (CHRs) have been used to describe and compare aircraft handling qualities for over 40 years, but are by their very nature, subjective. The subjective and sometimes ambiguous results obtained from qualitative handling quality ratings are inconsistent with the rest of the flight test process, where quantifiable results followed by statistical analysis are the norm. This thesis presents a method for obtaining accurate and consistent flight test data that quantifies the handling qualities of a specific aircraft. The method is demonstrated using both pilot-in-the-loop simulations and flight tests with the NF-16D Variable-Stability In-Flight Simulator Test Aircraft (VISTA). Boundary Avoidance …

Go to article

The Effects Of Orthophosphate As A Copper Corrosion Control Inhibitor In High Alkalinity Drinking Water Systems, Stephen Grace Mar 2007

The Effects Of Orthophosphate As A Copper Corrosion Control Inhibitor In High Alkalinity Drinking Water Systems, Stephen Grace

Theses and Dissertations

The purpose of this research was to investigate orthophosphate as a corrosion inhibitor for copper pipe in a high-alkalinity drinking water system. Specifically, this thesis sought to answer three research questions regarding the impact of orthophosphate treatment, the nature of the mechanism by which orthophosphate controls copper corrosion, and the value of equilibrium modeling in predicting orthophosphate’s effects. The research questions were answered through a comprehensive literature review and experimental methodology integrating laboratory jar tests, water sampling and analysis from a field investigation, qualitative solids analysis, and equilibrium model application. This study analyzed field data obtained over the course of …

Go to article

Forecasting The Kc-135 Cost Per Flying Hour: A Panel Data Analysis, Michael T. Bryant Mar 2007

Forecasting The Kc-135 Cost Per Flying Hour: A Panel Data Analysis, Michael T. Bryant

Theses and Dissertations

This thesis developed models to forecast the KC-135R monthly Consumables (CONS) and Depot Level Reparable (DLR) Cost per Flying Hour (CPFH) for each U.S. Air Force service component. Using data for each operating location from FY1998 to FY2004, the models were constructed using panel data analysis, a form of regression that adds a cross-sectional and time-series dimension. In addition to including factors previously identified as prime contributors to CPFH, the models added new elements that may influence maintenance costs and be of interest to policymakers. These elements included mission capable rates, airframe operating hours, and climatology factors. An interaction variable …

Go to article

Aphid: Anomaly Processor In Hardware For Intrusion Detection, Samuel A. Hart Mar 2007

Aphid: Anomaly Processor In Hardware For Intrusion Detection, Samuel A. Hart

Theses and Dissertations

The Anomaly Processor in Hardware for Intrusion Detection (APHID) is a step forward in the field of co-processing intrusion detection mechanism. By using small, fast hardware primitives APHID relieves the production CPU from the burden of security processing. These primitives are tightly coupled to the CPU giving them access to critical state information such as the current instruction(s) in execution, the next instruction, registers, and processor state information. By monitoring these hardware elements, APHID is able to determine when an anomalous action occurs within one clock cycle. Upon detection, APHID can force the processor into a corrective state, or a …

Go to article

Circuit And Modeling Solutions For High-Speed Chip-To-Chip Communication, Timothy Mowry Hollis Mar 2007

Circuit And Modeling Solutions For High-Speed Chip-To-Chip Communication, Timothy Mowry Hollis

Theses and Dissertations

This dissertation presents methods for modeling and mitigating voltage noise and timing jitter across high-speed chip-to-chip interconnects. Channel equalization and associated tuning schemes have been developed to target the distinct characteristics and signal degradation exhibited in the clock and data signals of multi-Gigabit/second digital communication links. Multiple methods for generating realistically degraded signals for the purpose of simulation are also presented and used to verify the proposed equalization and filtering topologies. Specifically, a new technique for modeling high-speed jittery clocks in the frequency domain is presented and shown to reduce transient simulation time and memory requirements, while simultaneously improving the …

Go to article

Optimal Orbital Coverage Of Theater Operations And Targets, Kimberly A. Sugrue Mar 2007

Optimal Orbital Coverage Of Theater Operations And Targets, Kimberly A. Sugrue

Theses and Dissertations

The use of satellites as a tactical asset to support theater operations is a desired capability for future space operations. Unlike traditional satellite systems designed to provide coverage over the entire globe or large regions, tactical satellites would provide coverage over a small region which can be modeled as a single ground point defined by a latitude and longitude. In order to provide sufficient utility as a theater asset, a satellite should be placed in an orbit that provides a maximum amount of coverage of the target ground point. This study examined the optimization of orbit parameters to maximize the …

Go to article

Investigation Of Gate Current In Neutron Irradiated AlXGa1-XN/Gan Heterogeneous Field Effect Transistors Using Voltage And Temperature Dependence, Thomas E. Gray Mar 2007

Investigation Of Gate Current In Neutron Irradiated AlXGa1-XN/Gan Heterogeneous Field Effect Transistors Using Voltage And Temperature Dependence, Thomas E. Gray

Theses and Dissertations

The gate current of Al27Ga73N/GaN heterogeneous field effect transistors (HFETs) is investigated using current-voltage (IV) and current-temperature (IT) measurement demonstrating that trap assisted tunneling (TAT) is the primary current mechanism. A thermionic trap assisted tunneling (TTT) model is used with variables of Schottky barrier height, trap energy, donor density and trap density. This results in a sigma of 1.38x10-8 A for IT data measured between 85K and 290K and for IV data measured between 0.0 V and -4.0 V. High energy (>0.5 MeV) neutron irradiation confirms an increase of gate current with fluence. An …

Go to article

High Resolution Mesoscale Weather Data Improvement To Spatial Effects For Doserate Contour Plot Predictions, Christopher P. Jones Mar 2007

High Resolution Mesoscale Weather Data Improvement To Spatial Effects For Doserate Contour Plot Predictions, Christopher P. Jones

Theses and Dissertations

Reanalysis weather data is obtained for dates surrounding historical nuclear tests and processed through Regional Atmospheric Modeling System (RAMS) software to produce a high-resolution weather forecast. Output from RAMS is visualized to check for validity and input into Hazard Prediction and Assessment Capability (HPAC) software and modeled predictions are compared to historical observation data. Simulations are conducted using constant high resolution weather and varying terrain resolution. The HPAC prediction is numerically compared to historical observation data. The result of this research culminated in the knowledge that early-time, low-altitude wind data was neglected by HPAC's incorporation of the Defense Land Fallout …

Go to article

Optimal Spacecraft Attitude Control Using Aerodynamic Torques, Michael L. Gargasz Mar 2007

Optimal Spacecraft Attitude Control Using Aerodynamic Torques, Michael L. Gargasz

Theses and Dissertations

This thesis introduces a method of three-axis spacecraft attitude control using only aerodynamic torques. Attitude actuation is achieved using four control panels mounted on the rear of a cubical spacecraft bus. The controller consists of an outer loop using linear state feedback to determine desired control torque and an inner loop to choose appropriate control panel angles. The inner loop uses a Jacobian-based approach to invert the nonlinear relationship between panel angles and generated torque. Controller performance is evaluated via simulations, which show that three-axis control is possible over a range of initial angles and angular rates. The analysis used …

Go to article

Evaluating The Application Of Modularity To Reduce Market Risk In Technology Push Products, Aaron John Hopkinson Mar 2007

Evaluating The Application Of Modularity To Reduce Market Risk In Technology Push Products, Aaron John Hopkinson

Theses and Dissertations

Technology push product development presents a number of challenges over the more typical market pull product development. Despite these challenges, enough advantages exist to motivate firms to develop technology push products at greater risk. Modularity is a tool that can address some of these challenges. Currently most research and application of modularity have focused on market pull product development efforts. The research in this thesis explores the value of modularity in technology push product development through the development of methods and the analysis of 68 example products including 35 technology push products. A method has been developed for quantifying the …

Go to article

A Modular Mixed Signal Vlsi Design Approach For Digital Radar Applications, Brian M. Brakus Mar 2007

A Modular Mixed Signal Vlsi Design Approach For Digital Radar Applications, Brian M. Brakus

Theses and Dissertations

This study explores the idea of building a library of VHDL configurable components for use in digital radar applications. Configurable components allows a designer to choose which components he or she needs and configures those components for a specific application. By doing this, design time for ASICs and FPGAs is shortened because the components are already designed and tested. This idea is demonstrated with a configurable dynamic pipelinable fast fourier transform. Many FFT implementations exist, but this implementation is both configurable and dynamic. Pre-synthesis customization allows the FFT to be tailored to almost any DSP application, and the dynamic property …

Go to article

Parametric Reliability Of Space-Based Field Programmable Gate Arrays, Joseph C. Pomager Mar 2007

Parametric Reliability Of Space-Based Field Programmable Gate Arrays, Joseph C. Pomager

Theses and Dissertations

The high cost of failure for microelectronic devices operating in the space environment has led to a need for an accurate characterization of a device's reliability prior to being deployed. In addition, significant cost savings can be achieved by determining this reliability prior to fabrication. With the increased performance needs required for many missions, designers are seeking to utilize devices that have smaller and smaller feature sizes. Specifically, feature sizes as small as 130, 90, and 65 nm. A characterization of the space environment is constructed specifically to address the extreme conditions that can affect the performance and functionality of …

Go to article

Optimal Sensor Threshold Control And The Weapon Operating Characteristic For Autonomous Search And Attack Munitions, Roland A. Rosario Mar 2007

Optimal Sensor Threshold Control And The Weapon Operating Characteristic For Autonomous Search And Attack Munitions, Roland A. Rosario

Theses and Dissertations

This Thesis considers the optimal employment of a wide area search munition in a battlespace where a target is known to be uniformly distributed among false targets which are Poisson distributed. The Poisson distribution's parameter is obtained from readily available battlespace intelligence. This work formulates and solves the optimal control problem for deriving the optimal sensor threshold schedule in order to maximize the probability of attacking the target during the battlespace sweep while constraining the probability of attacking a false target. The efficiency gained by optimally varying the sensor threshold is compared against the performance achieved with a static, optimum …

Go to article

Ceas E-News 03.06.2007, College Of Engineering And Applied Sciences Mar 2007

Ceas E-News 03.06.2007, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

SWE engineers a Girl Scout work ship featuring future careers and fun

Go to article

Developing A Framwork For Evaluating Organizational Information Assurance Metrics Programs, Adam R. Bryant Mar 2007

Developing A Framwork For Evaluating Organizational Information Assurance Metrics Programs, Adam R. Bryant

Theses and Dissertations

The push to secure organizational information has brought about the need to develop better metrics for understanding the state of the organization’s security capability. This thesis utilizes case studies of information security metrics programs within Department of Defense organizations, the United States Air Force (USAF), and the National Aeronautics and Space Administration’s (NASA’s) Jet Propulsion Lab to discover how these organizations make decisions about how the measurement program is designed, how information is collected and disseminated, and how the collected information supports decision making. This research finds that both the DOD and USAF have highly complex information security programs that …

Go to article

Hardware Virtualization Applied To Rootkit Defense, Douglas P. Medley Mar 2007

Hardware Virtualization Applied To Rootkit Defense, Douglas P. Medley

Theses and Dissertations

This research effort examines the idea of applying virtualization hardware to enhance operating system security against rootkits. Rootkits are sets of tools used to hide code and/or functionality from the user and operating system. Rootkits can accomplish this feat through using access to one part of an operating system to change another part that resides at the same privilege level. Hardware assisted virtualization (HAV) provides an opportunity to defeat this tactic through the introduction of a new operating mode. Created to aid operating system virtualization, HAV provides hardware support for managing and saving multiple states of the processor. This hardware …

Go to article

Multi-Dimensional Classification Algorithm For Automatic Modulation Recognition, Ouail Albairat Mar 2007

Multi-Dimensional Classification Algorithm For Automatic Modulation Recognition, Ouail Albairat

Theses and Dissertations

This thesis proposes an approach for modulation classification using existing features in a more efficient way. The Multi-Dimensional Classification Algorithm (MDCA) treats features extracted from signals of interest as elements with irrelevant identities, hence eliminating any dependence of the classifier on any particular feature. This design enables the use of any number of features, and the MDCA algorithm provides the capability to classify modulations in higher dimensions. The use of multiple features requires an equal number of data dimensions, and thus classification in as high a dimensional space as possible can improve final classification results. Finally, the MDCA algorithm uses …

Go to article

Characterization Of Intercalated Graphite Fibers For Microelectromechanical Systems (Mems) Applications, Bryan W. Winningham Mar 2007

Characterization Of Intercalated Graphite Fibers For Microelectromechanical Systems (Mems) Applications, Bryan W. Winningham

Theses and Dissertations

Research was accomplished to characterize the electrical and physical characteristic changes of the Thornel® P-100 carbon fiber and five variants when intercalated with 96% sulfuric acid and incorporated the use of Microelectromechanical Systems (MEMS) structures for testing purposes. The five fiber variants were oxidized in 1 M nitric acid at 0.5 A for 30 seconds, 1 and 2 minutes, the last two samples were detreated at 1150 °C for one hour prior to the nitric acid treatment. The fibers were mounted onto a MEMS die, placed into a chip carrier, sulfuric acid added, the chip carrier sealed and testing accomplished. …

Go to article

Implementation And Optimization Of The Advanced Encryption Standard Algorithm On An 8-Bit Field Programmable Gate Array Hardware Platform, Ryan J. Silva Mar 2007

Implementation And Optimization Of The Advanced Encryption Standard Algorithm On An 8-Bit Field Programmable Gate Array Hardware Platform, Ryan J. Silva

Theses and Dissertations

The contribution of this research is three-fold. The first is a method of converting the area occupied by a circuit implemented on a Field Programmable Gate Array (FPGA) to an equivalent as a measure of total gate count. This allows direct comparison between two FPGA implementations independent of the manufacturer or chip family. The second contribution improves the performance of the Advanced Encryption Standard (AES) on an 8-bit computing platform. This research develops an AES design that occupies less than three quarters of the area reported by the smallest design in current literature as well as significantly increases area efficiency. …

Go to article

Price Vs. Performance: The Value Of Next Generation Fighter Aircraft, John M. Stelly Mar 2007

Price Vs. Performance: The Value Of Next Generation Fighter Aircraft, John M. Stelly

Theses and Dissertations

The United States Department of Defense (DoD) is currently recapitalizing its aging fighter aircraft inventory with the F-22A and F-35. While the DoD may consider cost and performance issues, it does not use a quantitative model that effectively measures the tradeoffs between the two. This thesis constructs a hedonic model of the fighter aircraft market to measure the implicit price on fighter performance characteristics and specifically applies it to next-generation aircraft. Data from 50 aircraft from 1949-present were used to construct two models – one based on procurement costs and one based on research, design, test, and evaluation (RDT&E) costs. …

Go to article

Beyond Passswords: Usage And Policy Transformation, Alan S. Alsop Mar 2007

Beyond Passswords: Usage And Policy Transformation, Alan S. Alsop

Theses and Dissertations

The purpose of this research is to determine whether the transition to a two-factor authentication system is more secure than a system that relied only on what users “know” for authentication. While we found that factors that made passwords inherently vulnerable did not transfer to the PIN portion of a two-factor authentication system, we did find significant problems relating to usability, worker productivity, and the loss and theft of smart cards. The new authentication method has disrupted our ability to stay connected to ongoing mission issues, forced some installations to cut off remote access for their users and in one …

Go to article

Using Concept Maps To More Efficiently Create Intelligence Information Models, Christopher E. Coryell Mar 2007

Using Concept Maps To More Efficiently Create Intelligence Information Models, Christopher E. Coryell

Theses and Dissertations

Information models are a critical tool that enables intelligence customers to quickly and accurately comprehend U.S. intelligence agency products. The Knowledge Pre-positioning System (KPS) is the standard repository for information models at the National Air and Space Intelligence Center (NASIC). The current approach used by NASIC to build a KPS information model is laborious and costly. Intelligence analysts design an information model using a manual, butcher-paper-based process. The output of their work is then entered into KPS by either a single NASIC KPS "database modeler" or a contractor (at a cost of roughly $100K to the organization). This thesis proposes …

Go to article

Characterizationn Of Polumer-Based Mems Pyroelectic Infrared Detector, Mark E. Allard Mar 2007

Characterizationn Of Polumer-Based Mems Pyroelectic Infrared Detector, Mark E. Allard

Theses and Dissertations

AFRL/MLPJE had developed a novel thermal sensing material termed protein-impregnated-polymer (PIP). Thus far, a proof-of-concept has been demonstrated using a macro-sized pixel (0.64 mm2) as a bolometric detector. In an effort to better characterize this novel thermal sensing material, experimental data was used to determine figures of merit (FOMs) comparative to off-the-shelf thermal detectors. Microelectromechanical (MEMS) pixels were designed and used as the support structure for an inkjet-deposited droplet of the PIP. During the material characterization, two observations were made: PIP is a pyroelectric material, and the polymer (polyvinyl alcohol (PVA)) without the protein was found to be …

Go to article

First Prev Next Last