Engineering Commons^™

Catalytic Partial Oxidation Reforming Of Jp8 And S8, Thomas G. Howell

Theses and Dissertations

Catalytic partial oxidation (CPOX) reforming experiments were performed using a 10 kW Aspen Products Group, Inc. fuel processing prototype utilizing military logistic fuels JP8 and S8. S8 is a sulfur-free Fisher-Tropsch fuel, while JP8 is a multi-fuel blend, which could impact reforming efficiency, product distribution and byproduct production. Sulfur contained within the JP8 will adversely affect the product distribution; therefore, desulfurization beds, capable of removing up to 1000 ppm sulfur, were incorporated into the system. The catalyst used in the prototype is noble metal dispersed on cordierite monolith. The goal of this experiment was to evaluate the efficiency and product …

Effects Of Prior Aging On The Creep Response Of Carbon Fiber Reinforced Pmr-15 Neat Resin At 288°C In An Air Environment, Christopher A. Back

Theses and Dissertations

The mechanical response of carbon fiber reinforced PMR-15 neat resin with a ± 45 fiber orientation was investigated at 288 °C. Mechanical testing was performed on unaged specimens and specimens that were aged up to 1000 hours in an air environment. Tensile tests were performed to determine Young's modulus of elasticity and Ultimate Tensile Strength. Creep tests were performed at creep stress levels of 30 and 60 MPa. Creep periods of at least 25 h in duration were followed by recovery at zero stress. Duration of the recovery period was at least twice the time of the creep period. Oxidation …

Process Improvements For The Ah-64 Tail Rotor Vibration Analysis, Mark C. Newkirk

Theses and Dissertations

The Apache was the first helicopter of its kind to fly with the tail rotor blade offset by 55 degrees as opposed to the traditional 90 degrees. Current balancing methods approximate the rotor system as a traditional 4 bladed, same plane system with different weight sensitivity coefficients for each set of blades. The Apache tail rotor computer model was built using the Rotorcraft Comprehensive Analysis System (RCAS) program. The objective was not to develop solutions for the sensitivity coefficients, but to identify predictive trends that result from the tail rotor blade location. Currently, sensitivity coefficients applied to the adjustment algorithms …

High Temperature Degradation Of 5250-4 Polymer Resin, Patrick E. Link

Theses and Dissertations

5250-4 bismaleimide resin is used in high performance polymer matrix composites with high temperature aeronautical applications. This thesis investigated the thermal and oxidative degradation of 5250-4 neat resin powder in argon, air, and oxygen environments. The powder was aged at 163 deg. C, 177 deg. C, and 190 deg. C in all environments for at least 250 hours. Isothermal thermo-gravimetric analysis demonstrated that weight loss was negligible for aging in the argon environment, indicating weight loss is the result of an oxidative process at these temperatures. The 5250-4 powder exhibited an initial period of weight gain before eventually losing weight …

Compressive Creep Behavior Of Nextel™ 720/Alumina Ceramic Matrix Composite At 1200°C In Air And In Steam Environment, Neil R. Szymczak

Theses and Dissertations

The aerospace community continues to push the envelope in engineering aircraft that fly higher, faster, and safer while operating with a greater degree of efficiency. To meet these operational requirements innovative aerospace components must be designed to operate in aggressive environments. This research will investigate the ultimate compressive strength and the compressive creep behavior of Nextel^TM 720/Alumina ceramic matrix composite at 1200 °C in air and 100% steam environments. The effects of creep loading history on the tensile and compressive material behavior will also be examined. The primary strengths of the N720/A composite are its oxide/oxide composition which inherently …

Air Mobility Command's En Route Support Infrastructure: A Construct Of Aircraft Type And Geographic Location Utilized To Assess En Route Aircraft Logistics Support, Robert D. Polomsky

Theses and Dissertations

The ability of the United States Armed Forces to maintain a global presence and rapidly project military power anywhere in the world are key factors in preserving our freedom. To accomplish the demanding task of global reach support, Air Mobility Command employs an en route support infrastructure. These en route locations provide varying levels of command, control, and communications (C3), logistics support, and aerial port functions. The goal of the en route is to minimize delays for AMC mission aircraft. However, these en route locations comprise a small percentage of the locations that AMC aircraft visit. Given the critical demand …

Voice And Video Capacity Of A Secure Wireless System, Jason R. Seyba

Theses and Dissertations

Improving the security and availability of secure wireless multimedia systems is the purpose of this thesis. Specifically, this thesis answered research questions about the capacity of wireless multimedia systems and how three variables relate to this capacity. The effects of securing the voice signal, real-time traffic originating foreign to a wireless local area network and use of an audio-only signal compared with a combined signal were all studied. The research questions were answered through a comprehensive literature review in addition to an experiment which had thirty-six subjects using a secure wireless multimedia system which was developed as part of this …

Designing An Experimental Gaming Platform For Trading Grid Resources, Danny Oh, Shih-Fen Cheng, Dan Ma, Ravi Bapna

Research Collection School Of Computing and Information Systems

This paper describes our current work in designing an experimental gaming platform for simulating the trading of grid resources. The open platform allows researchers in grid economics to experiment with different market structures and pricing models. We would be using a design science approach in the implementation. Key design considerations and an overview of the functional design of the platform are presented and discussed.

Global Technology Initiative Study Tour To Asia At San Jose State University, Belle Wei, Jacob Tsao

Faculty Publications

Prompted by the outsourcing of knowledge-based jobs in Silicon Valley and elsewhere in the U.S. and by the resulting necessity for students to adapt to and capitalize on the global economy, the College of Engineering at San Jose State University established a one-million dollar Global Technology Initiative (GTI) Study Program to provide American students with a global perspective and understanding of the issues. The initiative has sponsored an annual program study tour for 25 undergraduate students on a two-week all-expense-paid study tour to Taiwan and China during the summers of 2004, 2005 and 2006. We reported our 2004 experience at …

Assessment Of Labview And Multisim In The Delivery Of Electronics Laboratory Content, Julio Garcia, Patricia Backer

Faculty Publications

The goal of this study, funded by the National Science Foundation, was to adapt the work of other researchers to improve the delivery of electronics lecture and laboratory content in the Electronics & Computer Technology (ECT) area. From the extensive research on ethnic and gender differences in learning styles, the evidence suggests that ethnic minorities and women work best when the material is organized so that students work in teams and have a high level of hands-on experimentation and problem-solving. We developed our materials to maximize these aspects since in our institution the “minority” constitutes the majority of our student …

Assessment Of Multi Media & Web Based Instruction In A Science Technology & Society Course, Patricia Backer

Faculty Publications

Multimedia can be a powerful tool in exploring the nature of the world around us, including its technological systems. This paper describes the assessment of self-paced multimedia and web- based modules that are used in an advanced General Education (GE) course in the College of Engineering at San José State University. The development of these modules began in 1994 and has undergone many revisions. Currently, four of the seven units in this class are taught using either multimedia CDs or web-based material.The General Education course, Technology and Civilization (TECH 198), is designed to introduce students to the realm of history …

Technology And Gender Issues: Development And Assessment Of A Freshman General Education Course In The College Of Engineering, Patricia Backer

Faculty Publications

This class, Technology VS Women, explores the interaction of gender with technology and answers questions such as: Is technology a “male” science? Is modern technology compatible to both male and female users? What does history tell us about the role of women at work relating to technology? The ideas presented in this course challenges some commonly held myths and misconceptions about technology in our society. This course focuses on the technological changes since 1900 and how they have affected both men and women. The effect of cultural biases and perspectives on the working and educational environments also are addressed. This …

Rationales For Collaboration; Implications For The Irish Road Freight Industry, Eoin Plant, Jim Mcgovern

Conference Papers

The European Union has made a commitment to promoting sustainable mobility through advanced transport logistics. One of the principal areas yet to be addressed is that of the potential barriers to advanced transport logistics and the attitudes of industry to this advancement. This paper addresses some of these concerns and argues that competition for high-value contracts can be very tough, especially where the contracts are from large organisations that often prefer to develop a relationship with only one transport service provider. The paper attempts to put the research into a theoretical framework of Resource-Advantage Theory. Empirical evidence is presented from …

Maximizing Broadcast And Multicast Traffic Load Through Link-Rate Diversity In Wireless Mesh Networks, Chun Tung Chou, Bao Hua Liu, Archan Misra

Research Collection School Of Computing and Information Systems

This paper studies some of the fundamental challenges and opportunities associated with the network-layer broadcast and multicast in a multihop multirate wireless mesh network (WMN). In particular, we focus on exploiting the ability of nodes to perform link-layer broadcasts at different rates (with correspondingly different coverage areas). We first show how, in the broadcast wireless medium, the available capacity at a mesh node for a multicast transmission is not just a function of the aggregate pre-existing traffic load of other interfering nodes, but intricately coupled to the actual (sender, receiver) set and the link-layer rate of each individual transmission. We …

Materials And Processes For Printed Electronics: Evaluation Of Gravure Printing In Electronics Manufacture, Erika Hrehorova

Dissertations

The primary goal of printing electronics is to create structures and devices that are functionally similar to conventional electronics, but at greater speed, lower cost and less production complexity. There are advantages and challenging disadvantages of using printing processes to manufacture electronic devices. Printing has been very well optimized for printing visual images that meet the requirements of human eye. However in the production of functional electronic devices, there are more stringent requirements on resolution, registration and quality of printed features and functional layers.

The main goal of this work is to form a starting point to a bigger picture …

Low Jitter Phase-Locked Loop Clock Synthesis With Wide Locking Range, Adnan Gundel

Dissertations

The fast growing demand of wireless and high speed data communications has driven efforts to increase the levels of integration in many communications applications. Phase noise and timing jitter are important design considerations for these communications applications. The desire for highly complex levels of integration using low cost CMOS technologies works against the minimization of timing jitter and phase noise for communications systems which employ a phase-locked loop for frequency and clock synthesis with on-chip VCO. This dictates an integrated CMOS implementation of the VCO with very low phase noise performance. The ring oscillator VCOs based on differential delay cell …

Direct Simulations Of Cells Motions And Deformations In Flow, Quan Jin

Dissertations

Direct numerical simulations (DNS) are used to study the motions and deformations of blood cells, especially leukocytes, in pressure driven flows in parallel plate channels with both smooth and uneven walls under adhesion force between the leukocytes and the channel wall.

Leukocytes are represented by two composite fluid models. The first model is the compound-drop model in which the cytoplasm and the nucleus are modeled as fluids, and the second one is the drop-rigid-particle model in which the cytoplasm is modeled as a fluid and the nucleus as a rigid particle. The adhesion force is computed using two adhesion force …

Formation Of Rdx Nanoparticles By Rapid Expansion Of Supercritical Solution : In Situ Characterization By Laser Scattering, Takuya Matsunaga

Dissertations

Cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX), a well-known energetic material, is highly explosive. Reduction of the sensitivity of RDX is desired for safe handling and

storage in military applications. Data on the sensitivity of RDX in the 10-1000 µm crystal size range suggested that the impact sensitivity could be further reduced by reduction of the crystal size to the sub-micron or nano-scale (Armstrong, 1990). Recent research with nano-RDX obtained using Rapid Expansion of Supercritical Solutions (RESS) confirmed these expectations (Stepanov, 2005).

RESS process appeared to be one out of a few techniques of production of nanoscale energetic materials free of the risk of explosion. …

Analysis Of Truck Delays At Container Terminal Security Inspection Stations, Dae-Gwun Yoon

Dissertations

After September 11, 2001, special attention has been given to the vulnerability at container transportation to terrorist activities. United States Customs and Border Protection (CBP) has set up inspection stations for containers at seaport terminals to screen containers, but this practice affects the truck turnaround time in the seaport by generating additional processing delays.

This dissertation analyses the additional truck turnaround time incurred at the inspection stations under various levels of security. Queuing models were used to estimate truck delay as containers are inspected at two successive security inspection stages. Each stage may utilize one or more inspection equipment. The …

Synthesis And Analysis Of Reactive Nanocomposites Prepared By Arrested Reactive Milling, Swati M. Umbrajkar

Dissertations

Different types of reactive nanocomposites have been synthesized by Arrested Reactive Milling (ARM). The technical approach was to increase the interface area available for heterogeneous reaction between solid fuel and oxidizer components. Using aluminum as the main fuel and different metal oxides as oxidizers, highly energetic reactive nanocomposites with different degrees of structural refinement were synthesized. Specifically, stoichiometric Al-MoO₃, Al-CuO, and Al-NaNO₃ material systems were studied in detail.

The correlation of heterogeneous exothermic reactions occurring in the nanocomposite powders upon their heating at low rates and ignition events observed for the same powders heated rapidly was of …

Reliability Studies Of Tin/Hf-Silicate Based Gate Stacks, Naser Ahmed Chowdhury

Dissertations

Hafnium-silicate based oxides are among the leading candidates to be included into the first generation of high-Κ gate stacks in nano-scale CMOS technology because of their distinct advantages as far as thermal stability, leakage characteristics, threshold stability and low mobility degradation are concerned. Their reliability, which is limited by trapping at pre-existing and stress induced defects, remains to be a major concern.

Energy levels of electrically active ionic defects within the thick high-Κ have been experimentally observed in the context of MOS band diagram for the first time in Hf-silicate gate stacks from low temperature and leakage measurements. Excellent match …

Central And Peripheral Autonomic Influences : Analysis Of Cardio-Pulmonary Dynamics Using Novel Wavelet Statistical Methods, Anne Marie Petrock

Dissertations

The development and implementation of novel signal processing techniques, particularly with regard to applications in the clinical environment, is critical to bringing computer-aided diagnoses of disease to reality. One of the most confounding factors in the field of cardiac autonomic response (CAR) research is the influence of the coupling of respiratory oscillations with cardiac oscillations.

This research had three objectives. The first was the assessment of central autonomic influence over heart rate oscillations when the pulmonary system is damaged. The second was to assess the link between peripheral and central autonomic control schema by evaluating the heart rate variability (HRV) …

Design And Performance Of Cdma Codes For Multiuser Communications, Radharani Poluri

Dissertations

Walsh and Gold sequences are fixed power codes and are widely used in multiuser CDMA communications. Their popularity is due to the ease of implementation. Availability of these code sets is limited because of their generating kernels. Emerging radio applications like sensor networks or multiple service types in mobile and peer-to-peer communications networks might benefit from flexibilities in code lengths and possible allocation methodologies provided by large set of code libraries.

Walsh codes are linear phase and zero mean with unique number of zero crossings for each sequence within the set. DC sequence is part of the Walsh code set. …

In Vitro Studies Of Degradation And Bioactivity Of Aliphatic Polyesther Composites, Georgia Chouzouri

Dissertations

In spite of numerous publications on the potential use of combinations of aliphatic polyester composites containing bioactive fillers for bone regeneration, little information exists on the combined in vitro mechanisms involving simultaneously diffusion for polymer degradation and bioactivity through nucleation and growth of apatite in simulated body fluid (SBF) solution. The objective of this study is to contribute to the understanding of the fundamentals in designing non-porous, solid materials for bone regeneration, from experimental data along with their engineering interpretation.

Bioactivity, in terms of apatite growth, was assessed through several experimental methods such as scanning electron microscopy (SEM), energy dispersive …

Ceas E-News 05.31.2007, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

WMU TAGA members honored for journal and paper

Adaptable Videogame Platform For Interactive Upper Extremity Rehabilitation, Sally M. Jensen

Theses

The primary objective of this work is to design a recreational rehabilitation videogame platform for customizing motivating games that interactively encourage purposeful upper extremity gross motor movements. Virtual reality (VR) technology is a popular application for rehabilitation therapies but there is a constant need for more accessible and affordable systems. We have developed a recreational VR game platform can be used as an independent therapy supplement without laboratory equipment and is inexpensive, motivating, and adaptable. The behaviors and interactive features can be easily modified and customized based on players' limitations or progress.

A real-time method of capturing hand movements using …

Automatic Registration And Segmentation Of Abdominal Images And Detection Of Pancreatic Cancer, Girish Kumar Maniprasad

Theses

Localized and detailed analyses of 3D abdominal images obtained through different imaging modalities help greatly in determining the progression of a disease or for postoperative treatment / evaluation. However, such analyses become difficult and sometimes unfeasible due to the effects of patient motion and breathing. This is particularly evident during analysis of the pancreas for cancer, due to its proximity to other intra-abdominal organs. Within subject registration thus becomes imperative for pathological analysis of pancreatic cancer. An intensity-based, global image registration algorithm was developed in the present work, for registration of pancreatic abdominal images. The registration algorithm was automatic and …

Development And Evaluation Of A Simultaneous Multithreading Processor Simulator, Carla Verena S. Nunez

Theses

Modem processors are designed to achieve greater amounts of instruction level parallelism (ILP) and thread level parallelism (TLP). Simultaneous multithreading (SMT) is an architecture that exploits both LLP and TLP. It improves the utilization of the processor resources by allowing multiple independent threads to reside in the pipeline and dynamically scheduling the available resources among the threads.

The first part of this thesis presents the development of a simultaneous multithreading processor simulator. The SMT simulator is derived from SimpleScalar, a superscalar processor simulator widely used in the computer architecture research field. The basic pipeline is expanded to allow multiple threads …

Vibrotactile Sensory Substitution For Post-Stroke Rehabilitation, Carlos X. Rosado

Theses

The aftermath of a stroke leaves people with side effects such as speech and hearing problems, and loss of sensation in one side of their body. Sensory feedback in the hand is used to assess if the individual is using appropriate grip force to hold and use objects; lack of sensory feedback can lead to dropped or damaged objects, and possible hand injury. Existing force biofeedback devices are overly complex and difficult to use in the home. The goal of this project is to provide increased environmental awareness of hand grip force for individuals with reduced hand sensation. Although hand …

Band Discontinuity Measurements Of The Wafer Bonded Ingaas/Si Heterojunction, Aaron R. Hawkins, Kyle S. Mckay, Felix P. Lu, Jungsang Kim, Changhyun Yi, April S. Brown

Faculty Publications

p-type InGaAs/Si heterojunctions were fabricated through a wafer fusion bonding process. The relative band alignment between the two materials at the heterointerface was determined using current-voltage (I-V) measurements and applying thermionic emission-diffusion theory. The valence and conduction band discontinuities for the InGaAs/Si interface were determined to be 0.48 and 0.1 eV, respectively, indicating a type-II band alignment.