Engineering Commons^™

A Torque Based Power Input Model For Friction Stir Welding, Jefferson W. Pew

Theses and Dissertations

For decades models have been developed for predicting the size of the weld nugget and heat affected zones in fusion welded structures. The basis for these models is the welding heat input, which is fairly well understood for most arc welding processes. However, this traditional approach is not as straightforward for Friction Stir Welding (FSW). To date, there is no definitive relationship to quantify the heat input for FSW. An important step to establish a heat input model is to identify how FSW process parameters affect weld power. This study details the relationship between FSW process parameters and torque for …

Shape Matching, Relevance Feedback, And Indexing With Application To Spine X-Ray Image Retrieval, Xiaoqian Xu

Theses and Dissertations

The National Library of Medicine (NLM), an institute in the National Institutes of Health (NIH), maintains a collection of 17,000 digitized spine X-ray images obtained from the second National Health and Nutrition Examination Survey (NHANES II). Research effort has been devoted to develop a web-accessible retrieval system that allows retrieval of images from the NHANES II database on relevant and frequently found pathologies. A comprehensive and successful image retrieval system requires effective image representation and matching methods, relevance feedback algorithms to incorporate user opinions, and efficient indexing schemes for fast access to image databases. This dissertation studies and develops approaches …

Investigation Into Compatibility Between Repair Material And Substrate Concrete Using Experimental And Finite Element Method, Rashmi Pattnaik

All Dissertations

The failure of concrete repairs is mainly due to improper selection of repair material based on individual repair material properties, without investigating the compatibility between repair material and substrate concrete. In this dissertation the compatibility between eight repair materials and substrate concrete was investigated in three stages. First, individual properties of the repair materials such as setting time, flow, compressive strength, flexural strength, split tensile strength, bond strength, drying shrinkage, freeze-thaw resistance, and permeability, were determined using standard ASTM test procedures. Second, the compatibility was investigated using a composite beam under third point loading. Third, the correlation of repair material …

Modeling And Simulation Of Friction-Limited Continuously Variable Transmissions, Nilabh Srivastava

All Dissertations

Over the last few decades, a lot of research effort has increasingly been directed towards developing vehicle transmissions that accomplish the government imperatives of increased vehicle efficiency and lower exhaust (greenhouse gaseous) emissions. These exhaust emissions can be regulated or lowered by increasing the fuel economy of a vehicle, and CVTs (continuously variable transmissions), indubitably, play a crucial role in this plan to improve the fuel economy. A continuously variable transmission is an emerging automotive transmission technology that offers a continuum of gear ratios between desired limits. A CVT offers numerous advantages over the conventional multi-step gear transmissions such as …

Channel-Access And Routing Protocols For Wireless Ad Hoc Networks With Directional Antennas, Arvind Swaminathan

All Dissertations

Medium-access control (MAC) and multiple-hop routing protocols are presented that exploit the presence of directional antennas at nodes in a wireless ad hoc network. The protocols are designed for heterogeneous networks in which an arbitrary subset use directional antennas. It is shown that the new protocols improvement the network`s performance substantially in a wide range of scenarios.
A new MAC protocol is presented that employs the RTS/CTS mechanism. It accounts for the constraints imposed by a directional antenna system, and it is designed to exploit the capabilities of a directional antenna. It is shown that the receiver blocking problem is …

A Dynamic Workflow Framework For Mass Customization Using Web Service And Autonomous Agent Technologies, Daniel J. Karpowitz

Theses and Dissertations

Custom software development and maintenance is one of the key expenses associated with developing automated systems for mass customization. This paper presents a method for reducing the risk associated with this expense by developing a flexible environment for determining and executing dynamic workflow paths. Strategies for developing an autonomous agent-based framework and for identifying and creating web services for specific process tasks are presented. The proposed methods are outlined in two different case studies to illustrate the approach for both a generic process with complex workflow paths and a more specific sequential engineering process.

College Of Engineering Senior Design Competition Fall 2006, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Using Duplication With Compare For On-Line Error Detection In Fpga-Based Designs, Daniel L. Mcmurtrey

Theses and Dissertations

Space destined FPGA-based systems must employ redundancy techniques to account for the effects of upsets caused by radiated environments. Error detection techniques can be used to alert external systems to the presence of these upsets. Readback with compare is an error detection technique commonly employed in FPGA-based designs. This work introduces duplication with compare (DWC) as an automated on-line error detection technique that can be used as an alternative to readback with compare. This work also introduces a set of metrics that is used to quantify the effectiveness and coverage of this error detection technique. A tool is presented that …

Impact Of Wastewater Reuse In Burlington County On Surface Water Quality And Adjacent Wetlands, Crystal L. Mattson

Theses and Dissertations

This study was conducted to assess potential ecological impacts from application of treated wastewater effluent. Indian Springs Golf Course is currently irrigated with reclaimed wastewater. Grab water samples were collected from three (3) ponds located on the golf course over the course of a year and were analyzed for nitrate-nitrogen, total phosphorus, organics, and bacteria. A second golf course, Medford Lakes Country Club is currently irrigated with groundwater. Grab water samples were collected from both locations and analyzed for nutrients and bacteria for comparison purposes.

Results of sample analyses indicate that detriment to the quality of surface water at the …

Shear-Wave Velocity Model Of Near-Surface Sediments, Site Response, And Building Damage: 1886 Charleston, South Carolina Earthquake, Cedric Fairbanks

All Dissertations

An updated small-strain shear wave velocity (Vs) model of near-surface sediments is constructed using measurements from over 90 investigation sites in the greater Charleston area. It is constructed by separating the Vs measurements into six major geologic units. The six units are: 1) man-made fills, 2) Holocene and late Pleistocene deposits, 3) the Wando Formation, 4) the Ten Mile Hill beds, 5) the Penholoway Formation and the Daniel Island beds, and 6) Tertiary deposits. Median Vs values for these units in the top 25 m are 145 m/s, 111 m/s, 189 m/s, 176 m/s, 285 m/s and 399 m/s, respectively. …

Large 3-D Deflection And Force Analysis Of Lateral Torsional Buckled Beams, Robert Parley Chase

Theses and Dissertations

This thesis presents research on the force and deflection behavior of beams with rectangular cross-sections undergoing lateral torsional buckling. The large 3-D deflection path of buckling beam tips was closely approximated by circular arcs in two planes. A new chain algorithm element was created from pseudo-rigid-body segments and used in a chain calculation that accurately predicted the force deflection relationship of beams with large 3-D deflections.

The Effects Of Viscoelastic Behavior On The Operation Of A Delayed Resonator Vibration Absorber, John Cowans

All Theses

Delayed resonators have proven to be effective vibration absorbers (VAs) for tracking and canceling the effects of harmonic excitations on a structure. The Delayed Resonator (DR) is selfcontained, as no information from outside of its substructure is required for proper operation. It adjusts for variations in frequency using time-delay and gain as control parameters.
This thesis examines the relationship between viscoelastic (VE) loss mechanisms in systems with DR and the choice of modeling method used to calculate control parameters and determine system stability. It is hypothesized that a VE loss mechanism approximated by a single viscous dashpot may lead to …

Controlling Steam Flood Migration With Air Injection Wells, Rex Hodges

All Dissertations

Steam flooding is an aggressive remediation technology for removing volatile organic chemical (VOC) sources that slowly dissolve into passing groundwater. Plume concentrations can be reduced, accelerating cleanup, and decreasing plume management costs. Steam injected in wells surrounding the source spreads outward and develops into a front that drives contamination to a system of groundwater pumping wells in the saturated zone and soil vapor extraction wells in the vadose zone. The process can be modeled with the non-isothermal multi-phase flow simulator T2VOC to include operation designs and factors at individual sites.
A pilot field-scale test at the Savannah River Site (SRS) …

Soccer Headgear Effects On Impact Profiles During A Heading Scenario, Ryan Posey

All Theses

The risk of head injuries in the sport of soccer has recently become a topic of concern, particularly with youth players whom may suffer long-lasting or even permanent effects from a severe head injury. In response to these worries, headguards have been developed specifically for use in soccer. These headguards have been studied using crash test dummy heads mounted with various electronic instruments - accelerometers, gyroscopes, etc. The headgear-mounted dummy heads have been struck with various objects (soccer ball, another dummy head, pole, etc) to test for changes in head acceleration response.
Testing of soccer headgear has previously been limited …

Internal Combustion Engine Cooling Strategies: Theory And Test, John Chastain

All Theses

Advanced internal combustion engine thermal management systems can enhance overall engine performance through the use of computer controlled cooling system actuators. Existing ground vehicle cooling systems generally have performance limitations due to the fixed behavior of the wax-based thermostat valve and crankshaft dependent operation of the coolant pump and radiator fan. Upgrading the traditional thermostat valve, water pump, and radiator fan with actuators permit real time computer control for improved temperature tracking and reduced power consumption. In this paper, the benefits associated with advanced automotive cooling systems are experimentally investigated. A 4.6L engine with a real-time data acquisition and control …

A Bayesian Perspective On Estimating Mean, Variance, And Standard-Deviation From Data, Travis E. Oliphant

Faculty Publications

This article shows how to compute confidence intervals for mean, standard-deviation, and variance using Bayesian methods. The method is implemented in SciPy as scipy.stats.bayes_mvs After reviewing some classical estimators for mean, variance, and standard-deviation and showing that un-biased estimates are not usually desirable, a Bayesian perspective is employed to determine what is known about mean, variance, and standard deviation given only that a data set in-fact has a common mean and variance. Maximum-entropy is used to argue that the likelihood function in this situation should be the same as if the data were independent and identically distributed Gaussian. A non-informative …

Unsupervised Neural Pattern Classifiers For Oral Vowel Pronunciation Of Foreign-Accented Speech, Joseph Hecker

All Theses

This thesis describes the development of unsupervised neural-based pattern classifiers for the training of vowel pronunciations for students learning a foreign language. This paper examines American learners of the French language. A corpus of single word utterances is compiled from a group of native French speakers. Cepstral features are used to train two unsupervised neural pattern classifiers: a self-organizing map and a growing neural gas. The development and justification for the use of these classifiers is presented. The output from the classifier is translated to a bar graph for visual assessment. The degree to which the utterance sounds native is …

The Effects Of Calcium Magnesium Acetate Deicers On Portland Cement Mortar Bars, Jeffrey Davis

All Theses

This thesis involves the investigation of the effects of Calcium Magnesium Acetate (CMA) deicers on Portland cement mortar bars. In addition to mass-loss, length change, pulse velocity and soak solution pH, the thesis also contains a rigorous chemical analysis of the mortar completed at the National Institute of Standards and Technology (NIST) in Gaithersburg, MD. The research completed at NIST was done using a technique known as X-ray Mapping. The X-ray techniques were employed to determine the exact nature of the damage caused by CMA. The thesis is a combination of two papers, on the physical effects of CMA and …

Process Modelling Support For The Conceptual Modelling Phase Of A Simulation Project, Cathal Heavey, John Ryan

Conference papers

While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the conceptual modelling phase. Several authors have reported the advantages of using process modelling tools in the early phases of a simulation project.

This paper provides an overview of process modelling tools in relation to their support for simulation, categorizing the tools into formal method and descriptive methods. A conclusion from this review is that none of the tools available adequately support the requirements gathering phase of simulation. This is not surprising as none of the process modelling …

Fast Algorithms For Computing Statistics Under Interval And Fuzzy Uncertainty, And Their Applications, Gang Xiang, Vladik Kreinovich

Departmental Technical Reports (CS)

In many engineering applications, we have to combine probabilistic, interval, and fuzzy uncertainty. For example, in environmental analysis, we observe a pollution level x(t) in a lake at different moments of time t, and we would like to estimate standard statistical characteristics such as mean, variance, autocorrelation, correlation with other measurements. In environmental measurements, we often only measure the values with interval uncertainty. We must therefore modify the existing statistical algorithms to process such interval data.

In this paper, we provide a brief survey of algorithms for computing various statistics under interval (and fuzzy) uncertainty and of their applications, including …

Solar Dhw Storage Tanks And Systems, Florida Solar Energy Center

FSEC Energy Research Center®

Water is by far the most common storage medium in solar domestic hot water systems. Rock storage is another method of sensible heat storage, but is not generally used in systems that are exclusively DHW. Storage of heat in solutions of phase-changing salts is extremely rare in DHW systems and therefore is not discussed.

39th Conference On Senior Engineering Design Projects, College Of Engineering And Applied Sciences

Senior Engineering Design Conference

The 39th Conference on Senior Engineering Design Projects was held on December 5, 2006 at the College of Engineering and applied Sciences on the Parkview Campus of Western Michigan University. The college sponsors the conference to showcase the work of its graduating seniors, who are required to complete a capstone project that puts into practice what they have learned. Many of the projects are sponsored by business and industry.

For Piecewise Smooth Signals, L1 Method Is The Best Among Lp: An Interval-Based Justification Of An Empirical Fact, Vladik Kreinovich, Arnold Neumaier

Departmental Technical Reports (CS)

Traditional engineering techniques use the Least Squares method (i.e., in mathematical terms, the l2-norm) to process data. It is known that in many practical situations, lp-methods with p=/=2 lead to better results. In different practical situations, different values of p are optimal. It is known that in several situations when we need to reconstruct a piecewise smooth signal, the empirically optimal value of p is close to 1. In this paper, we provide a new interval-based theoretical explanation for this empirical fact.

Direct Sequence Modified Time Hopping Ppm Over Ultra Wideband S-V Channel, Peter Vial, Beata J. Wysocki, Tadeusz A. Wysocki

Department of Electrical and Computer Engineering: Faculty Publications (to 2015)

A three position Pulse Position Modulation (PPM) scheme is proposed for a Direct Sequence Time Hopping Ultra Wideband wireless communication system. The channel is based on the Saleh-Valenzuela model. We show that by adapting the Space Time Spreading technique to use three pulse positions in a single input single output system representing -2,0,2 an improvement in Bit Error Rate is achieved compared to sending the same bits using two pulse positions only. In addition, the bit access rate is doubled as two bits can be successfully sent in the same time using our proposed system.

Estimating Variance Under Interval And Fuzzy Uncertainty: Case Of Hierarchical Estimation, Gang Xiang, Vladik Kreinovich

Departmental Technical Reports (CS)

No abstract provided.

Thermal Failure Mechanism And Voltammetry Metrology For Cu/Barrier/Low K Integration, Dongmei Meng

Material Science and Engineering Dissertations - Archive

The present study investigates the thermal stability of Cu/barrier/porous low κ (PLK) integration first, and then a new characterization method based on voltammetry is developed to characterize quality of diffusion barrier and pore structure in low κ materials and its thermal stability. The study of thermal stability reveals that Cu/barrier/PLK interconnect fails by Cu out-diffusion through the defects of diffusion barrier into the PLK structure, which is driven by oxidation and stress gradient within the interconnect structure. The failure appears to be triggered by defects in diffusion barrier, however, such defects are not effectively detected by TEM observation due to …

Preparation And Characterization Of Properties Of Electrodeposited Copper Oxide Films, Longcheng Wang

Material Science and Engineering Dissertations - Archive

Copper oxides, including cuprous oxide and cupric oxide, are prepared by electrochemical deposition. The structural, optical and electrical properties of as-deposited copper oxides are evaluated, based on which cuprous oxide is selected as a promising material for photovoltaic applications. Electrodeposited cuprous oxide is a p-type semiconductor with a direct band gap of 2.06 eV. The mechanism of how pH affects the structural and electrical properties of electro-deposited cuprous oxide films is studied. In the pH range of 7.5 to 12.0, there are three different preferred crystal orientations: (100), (110) and (111). With different orientations, cuprous oxide shows different surface morphology …

Multi-Sensor Fusion Based Control For Autonomous Operations: Rendezvous And Docking Of Spacecraft, Jonathan Bryan Mcdonald

Mechanical and Aerospace Engineering Theses - Archive

The project considers the problem of motion synchronization of free flying robotic spacecraft and serviceable floating objects in space. The synchronization maneuvers are based on sample and hold nonlinear translational and attitude control laws. GPS pseudorange signals and a vision based sensor unit are modeled to give position measurements; position and velocity estimates are extracted from the measurements based on Extended Kalman Filter models. A sensor data fusion algorithm in the form of a Federated Extended Kalman Filter is implemented that blends the estimates of the individual filters into a global estimate. Nonlinear simulations where a Pursuer spacecraft attempted to …

Enhancement Of Pool Boiling Heat Transfer Using Thermally-Conductive Microporous Coating Techniques, Joo Han Kim

Mechanical and Aerospace Engineering Dissertations - Archive

The present research is an experimental study of the enhancement of boiling heat transfer using microporous coating techniques. The current research is divided into four major phases. During the first phase, the effects of different metal particle sizes in the coating compound for thermally non-conductive microporous coating on pool boiling performance of refrigerants and water are investigated. The test surfaces, solid copper blocks with 1-cm² base, were tested at atmospheric pressure in saturated FC-72, R-123, and water. Results showed that the surface treatment by non-conductive microporous coating significantly enhanced both nucleate boiling and critical heat flux of all three refrigerants. …

Flexible Microfluidic Circuit With Embedded In-Plane Valve, Srikar C. Paruchuri

Mechanical and Aerospace Engineering Theses - Archive

Recent developments in Microfluidic systems have demonstrated many potential applications related to biology, chemistry and medical sciences. Fluidic manipulation with precise volume control is a basic function in these systems, and microvalves play an important role in control and delivery of the fluid sample. One of the key issues in such valve design is to make large membrane deflections compared to the channel dimension. This thesis reports a flexible microfluidic chip with embedded in-plane valves for fluid manipulation. Silicone elastomer (Polydimethylsiloxane - PDMS) is one of the most suitable materials to fabricate microvalve membranes, because of its low Young's modulus, …