Engineering Commons^™

Identification Of System Design Features That Affect Sickness In Virtual Environments, Julie Drexler

Electronic Theses and Dissertations

The terms "simulator" and "VR" are typically used to refer to specific types of virtual environments (VEs) which differ in the technology used to display the simulated environment. While simulators and VR devices may offer advantages such as low cost training, numerous studies on the effects to humans of exposure to different VEs indicate that motion sickness-like symptoms are often produced during or after exposure to the simulated environment. These deleterious side effects have the potential to limit the utilization of VE systems if they jeopardize the health and/or safety of the user and create liability issues for the manufacturer. …

Analysis Of Aircraft Arrival Delay And Airport On-Time Performance, Yuqiong Bai

Electronic Theses and Dissertations

While existing grid environments cater to specific needs of a particular user community, we need to go beyond them and consider general-purpose large-scale distributed systems consisting of large collections of heterogeneous computers and communication systems shared by a large user population with very diverse requirements. Coordination, matchmaking, and resource allocation are among the essential functions of large-scale distributed systems. Although deterministic approaches for coordination, matchmaking, and resource allocation have been well studied, they are not suitable for large-scale distributed systems due to the large-scale, the autonomy, and the dynamics of the systems. We have to seek for nondeterministic solutions for …

Unsymmetrical And Symmetrical Sparse Iterative Algorithm With Multiple Right-Hand-Sides Strategies, D. T. Nguyen, A. P. Honrao, G. Hou, O. Akan, O. Baysal

Civil & Environmental Engineering Faculty Publications

Unified unsymmetrical and symmetrical iterative solvers for handling multiple right-hand-side vectors are examined in this work. Efficient computer implementation strategies (to reduce computational time and in-core memory requirements) are proposed. In-core, out-of-core, linear, multiple right hand side (RHS) vectors, non-linear, symmetrical, and unsymmetrical capabilities of the developed software are demonstrated by solving variety of problems selected form different engineering disciplines. Results indicate that the developed algorithm and software is reliable and efficient.

Electrodeposited Metal Matrix Nanocomposites As Thin Films And High Aspect Ratio Microstructures For Mems, Alonso Lozano Morales

LSU Doctoral Dissertations

The electrodeposition of metal-matrix nanocomposites as thin film and high aspect ratio microstructures (HARM’s) for MicroElectroMechanical Systems (MEMS) components is examined. The effect of -Al2O3 nanopowder on copper reduction from acidic and basic electrolytes is examined with rotating disk electrodes (RDE’s). At pH 0.2, regions of copper inhibition and enhancement are identified in the kinetic regime. Low particle loading (12.5 g/L) results in an inhibited copper rate, while, high particle concentration (60 g/L) does both, inhibits the rate at low overpotentials and accelerates it at higher overpotentials, depending on the electrode rotation rate. At pH 8 the presence of particles …

Design And Evaluation Of Automated, Continuous Culture Techniques For Brachionus Rotundiformis, Zhengzhong Zhang

LSU Doctoral Dissertations

A 40-L recirculating rotifer turbidostat (RRT) pilot system consisting of a rotifer reactor, biofilter, foam fractionator, feed container, harvester, and two air-lift pumps was designed to produce B. rotundiformis, a small (S-type) rotifer, that is increasingly demanded for production of small-gape marine finfish larvae. The system’s automatic monitoring (turbidity, pH, conductivity and temperature) and controlling (turbidity, pH, feeding and harvesting) were performed by a Rugid™ computer. A 4 (temperature) x 3 (salinity) study indicated that a 30oC/15 ppt treatment is the most favorable to the growth of B. rotundiformis. Under these conditions, the effect of harvest rate on rotifer system …

Experimental And Computational Analysis Of Random Cylinder Packings With Applications, Wenli Zhang

LSU Doctoral Dissertations

Random cylinder packings are prevalent in chemical engineering applications and they can serve as prototype models of fibrous materials and/or other particulate materials. In this research, comprehensive studies on cylinder packings were carried out by computer simulations and by experiments. The computational studies made use of a collective rearrangement algorithm (based on a Monte Carlo technique) to generate different packing structures. 3D random packing limits were explored, and the packing structures were quantified by their positional ordering, orientational ordering, and the particle-particle contacts. Furthermore, the void space in the packings was expressed as a pore network, which retains topological and …

Advances And Applications Of Dezert-Smarandache Theory (Dsmt) For Information Fusion (Collected Works), Vol. 2, Florentin Smarandache, Jean Dezert

Branch Mathematics and Statistics Faculty and Staff Publications

This second volume dedicated to Dezert-Smarandache Theory (DSmT) in Information Fusion brings in new fusion quantitative rules (such as the PCR1-6, where PCR5 for two sources does the most mathematically exact redistribution of conflicting masses to the non-empty sets in the fusion literature), qualitative fusion rules, and the Belief Conditioning Rule (BCR) which is different from the classical conditioning rule used by the fusion community working with the Mathematical Theory of Evidence.

Other fusion rules are constructed based on T-norm and T-conorm (hence using fuzzy logic and fuzzy set in information fusion), or more general fusion rules based on N-norm …

Management Of System Of Systems Engineering: System Of Systems Engineering Requirements, Charles Keating, Andres Sousa-Poza, Samuel Kovacic

Engineering Management & Systems Engineering Faculty Publications

Traditional systems engineering focuses efforts on developing requirements that are assumed to be objective, definitive, and unwavering. However, the function, development, and utilization of requirements for System of Systems Engineering (SoSE) do not have the level of maturity or sophistication as traditional systems engineering. To avoid miscalculation of the nature and role of requirements in SoSE, a closer examination is necessary. It would be presumptuous to assume that SoSE requirements are a simple extrapolation of traditional systems engineering requirements. The purpose of this paper is to explore the nature of requirements from a SoSE perspective. This examination is concentrated in …

Self-Oscillating Cmos Class D Amplifier Optimized For Low Output Power, Daniel J. White

Open Access Master's Theses (through 2010)

The continual push for smaller size and decreased power consumption has prompted the adoption of class D amplification for speaker and headphone drivers in portable media devices.With proper design, the power efficiency of this amplifier type can exceed any other topology over the whole output range, even at low output levels.

Simple amplifier topologies are not the norm for these integrated circuit (IC) class D amplifiers.This thesis shows that such complexity is not necessary for good performance.A recently presented simple self-oscillating topology is mapped into a standard CMOS technology and fabricated in a 0.5 micron process. The output stage is …

Hurricane Wind Speed And Rain Rate Retrieval Algorithm For The Stepped Frequency Microwave Radiometer, Ruba Amarin

Electronic Theses and Dissertations

This thesis presents the development and validation of the Hurricane Imaging Retrieval Algorithm (HIRA) for the measurement of oceanic surface wind speed and rain rate in hurricanes. The HIRA is designed to process airborne microwave brightness temperatures from the NOAA, Stepped Frequency Microwave Radiometer (SFMR), which routinely collects data during NOAA hurricane hunter aircraft flights. SFMR measures wind speeds and rain rates at nadir only, but HIRA will soon be integrated with an improved surface wind speed model for expanded utilization with next generation microwave hurricane imagers, such as the Hurricane Imaging Radiometer (HIRad). HIRad will expand the nadir only …

The Hydra Filesystem: A Distrbuted Storage Famework, Benjamin Gonzalez, George K. Thiruvathukal

Computer Science: Faculty Publications and Other Works

Hydra File System (HFS) is an experimental framework for constructing parallel and distributed filesystems. While parallel and distributed applications requiring scalable and flexible access to storage and retrieval are becoming more commonplace, parallel and distributed filesystems remain difficult to deploy easily and configure for different needs. HFS aims to be different by being true to the tradition of high-performance computing while employing modern design patterns to allow various policies to be configured on a per instance basis (e.g. storage, communication, security, and indexing schemes). We describe a working prototype (available for public download) that has been implemented in the Python …

Reduction Of Automobile And Aircraft Collisions With Wildlife In Indiana, David J. Glista, J. Andrew Dewoody, Travis Lee Devault

JTRP Technical Reports

Conflicts between wildlife and human interests have increased in recent decades due to growing human populations and the resulting expansion of anthropogenic pressures into wildlife habitat. Our overall objectives were to evaluate the the potential impacts of wildlife on transportation in Indiana and vice-versa. The results presented in this final report summarize two aspects of our research: the impact of automotive traffic on wildlife (“road kill”; Part I), and the wildlife hazards present at general aviation airports around the state (“airstrike”; Part II). The road kill dataset indicated that at 13 survey routes traversing 180 linear km of road, 11,068 …

Implementation Of A Non-Metallic Reinforced Bridge Deck, Volume 2: Thayer Road Bridge, Robert J. Frosch, Ali Cihan Pay

JTRP Technical Reports

The primary maintenance problem with bridges in Indiana has been deterioration of the concrete deck which is often related to corrosion of the reinforcing steel. While a corrosion protection system consisting of epoxy-coated reinforcement in combination with 2-1/2 in. of Class C concrete cover has been used in Indiana, research and experience have demonstrated that this system can be compromised. As an alternative solution to the corrosion problem in reinforced concrete, fiber reinforced polymer (FRP) bars which are corrosion resistant can be provided as reinforcement. This research was divided into two phases directed towards the implementation of a nonmetallic reinforced …

Photopolymer Diffractive Optical Elements In Electronic Speckle Pattern Shearing Interferometry, Emilia Mihaylova, Izabela Naydenova, Barry Duignan, Suzanne Martin, Vincent Toal

Articles

In this paper we present an electronic speckle pattern shearing interferometer using a photopolymer diffractive optical element in the form of a holographic grating, in combination with a ground glass to shear the images. The sheared images on the ground glass are further imaged onto a CCD camera. The distance between the grating and the ground glass can be used to control the shear and to vary the sensitivity of the system. The direction of sensitivity is easily controlled by rotation of the diffraction grating around its normal. Introducing photopolymer holographic gratings in ESPSI gives the advantage of using high …

An Approach To Teaching Pid Controller Tuning, Aidan O'Dwyer

Conference papers

This paper discusses an approach to the teaching of PID controller tuning methods to students in control engineering at Dublin Institute of Technology. The method involves analytically calculating the gain margin, phase margin and maximum sensitivity for PI and PID controlled systems whose process is modelled in first order lag plus time delay (FOLPD) form. Students can examine the performance of many tuning rules from graphical results, allowing insight to be developed as to the most rational choice of the tuning rule for the application. Some preliminary work done to develop an expert system to allow a greater automation of …

A Case Study In Modeling And Process Control: The Control Of A Pilot Scale Heating And Ventilation System, Robin Mooney, Aidan O'Dwyer

Conference papers

This paper details the control of a pilot scale laboratory heating and ventilation system. The system is represented in 2x2 multi-input, multi-output (MIMO) form. A process reaction curve identification technique was used to model (in first order lag plus delay - FOLPD - form) the flow process and temperature process portions of the system, over a range of operating conditions. Tests revealed that both processes were continuously non-linear. A gain scheduler with static decoupling was designed, using look-up tables, to continuously interpolate for the most suitable proportional-integral (PI) or proportional-integral-derivative (PID) controller settings and decoupler gains. The contribution of this …

Pi And Pid Controller Tuning Rules: An Overview And Personal Perspective, Aidan O'Dwyer

Conference papers

The ability of PI and PID controllers to compensate many practical processes has led to their wide acceptance in industrial applications. The requirement to choose two or three controller parameters is most easily done using tuning rules. Starting with a general discussion of industrial practice, the paper provides a survey of additional tuning rules for continuous-time PI and PID control of time-delayed single-input, single-output (SISO) processes, to those explored in a recent book by the author.

Enhancing Waste Management Through Automatic Control, Aidan O'Dwyer

Conference papers

Meeting environmental requirements is recognised as one of the six 21st century business drivers for automatic control. The proportional integral (PI) and proportional integral derivative (PID) controllers are the most dominant form of automatic controllers in industrial use today. With these techniques, it is necessary to adjust the controller parameters according to the nature of the process. Thus, for effective control of a heating, cooling and air-conditioning (HVAC) application, for example, specific values need to be chosen for the P, I and D parameters, which will be different for the values required to control, for example, a distillation column. This …

Reducing Energy Costs By Optimizing Controller Tuning, Aidan O'Dwyer

Conference papers

The proportional integral derivative (PID) controller is the most dominant form of automatic controller in industrial use today. With this technique, it is necessary to adjust the controller parameters according to the nature of the process. This tailoring of controller to process is known as controller tuning. Controller tuning is easily and effectively performed using tuning rules (i.e. formulae for controller tuning, based on process information). Such tuning rules allow the easy set up of controllers to achieve optimum performance at commissioning. Importantly, they allow ease of re-commissioning if the characteristics of the process change. The paper outlines the results …

Latency Compensation Control Of Computer Based Control Systems, Aidan O'Dwyer

Conference papers

This paper discusses the use of a modified Smith predictor for latency (i.e. time delay) compensation, to assist in the implementation of network computer based control systems. Such systems typically have a variable time delay associated with the transfer of information; the modified Smith predictor is robust to time delay variations.

Performance Improvement Using Simple Pid Controller Tuning Formulae, Aidan O'Dwyer

Conference papers

The proportional integral derivative (PID) controller is the most dominant form of automatic controller in industrial use today. With this technique, it is necessary to adjust the controller parameters according to the nature of the process. Thus, for effective control of a HVDC system, for example, specific values need to be chosen for the P, I and D parameters, which will be different for the values required to control, for example, an induction motor drive. This tailoring of controller to process is known as controller tuning. Controller tuning is easily and effectively performed using tuning rules (i.e. formulae for controller …

Synthesising Life-Sciences And Control Engineering: An Outline Survey And A Practical Example, Aidan O'Dwyer

Conference papers

There is an increasing interest in life science related areas in the electrical and control engineering community [1]. One manifestation of this interest is the development of interdisciplinary programmes, such as the B.Sc. in Medical Physics and Bioengineering, offered by the Dublin Institute of Technology from September 2005. A significant amount of research work in control engineering has focused on aspects of human physiological system, for example blood glucose regulation [2], cardiovascular modelling and control [3], and limb control [4]. There is an increasing emphasis on interdisciplinary research; in recognition of this, the Institute of Electrical Engineers (IEE) has starting …

A Wavelet Controller For Shunt Active Power Filter, Malabika Basu, Biswajit Basu

Conference papers

A wavelet-based controller for shunt active power filter (APF) has been proposed in this paper. The constructed controller based on multi resolution analysis has the advantage of better frequency bandwidth selection. The tuning parameters of the controllers are the gains to be applied to the time-frequency signals at different resolutions. This has the advantage of aiding the process of a proper choice of coefficients of tuning parameters. The developed simulation model of the APF with wavelet-based control shows satisfactory steady state and dynamic performance. A comparison with standard PI controller shows that the dynamic response of the proposed wavelet controller …

Optimising The Rating Of The Upqc For Applying To The Fault Ride Through Enhancement Of Wind Generation, N. G. Jayanti, Malabika Basu, Michael Conlon, Kevin Gaughan

Conference papers

The unified power quality conditioner (UPQC) is a combination of a shunt and a series compensator cascaded via a DC link capacitor which works on the combined principle of active filtering and dynamic voltage restoration. Therefore, the UPQC can be a potential solution to the grid integration problems associated with fixed speed wind generators including reactive power compensation and fault ride through capability. The hardware design of the UPQC can be made more cost effective by proper selection of the rating of the individual compensators of the UPQC. It is shown in the paper that the application of a fixed …

Ber Variation In An Uwb Ofdm Mimo Communications System Based On Measurements Made In A Picocell Wireless Environment, Conor Downing, Pat Chambers, Hussein Baher

Conference papers

A picocell UWB MIMO communications system model is considered which has five orthogonal sub-channels, each with its own OFDM signal. The effect of removing the various channel impulse response components which arise due to the multi-path propogation, a phenomenon characteristic of wide band transmission, is considered. This is a measurement based analysis where the measurements, themselves, were made, in a specially constructed enclosure which had reflective surfaces, using specially designed UWB antennas.

Design Of A Wide-Band Printed Antenna Using A Genetic Algorithm On An Array Of Overlapping Sub-Patches, Matthias John, Max Ammann

Conference papers

No abstract provided.

Wideband Directional Base-Station Antenna With Dual-Linear And Circular-Polarization Capabilities, Francisco Lerma, Matthias John, Giuseppe Ruvio, Max Ammann, N. Herscovici

Conference papers

A crossed-dipole antenna providing polarization diversity is presented. The antenna which employs a planar reflector yields high directivity and good isolation between ports over a wide impedance bandwidth, suitable for polarization-agile wireless base-station use. The dipole wing shape is optimised, which yields the wide bandwidth. Matching is achieved using a quarter-wave balanced-to-unbalanced section which also improves the port-to-port isolation. Radiation characteristics for linear and circular polarizations are presented

Melting And Solidification Study Of As-Deposited And Recrystallized Bi Thin Films, M. K. Zayed, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Melting and solidification of as-deposited and recrystallized Bi crystallites, deposited on highly oriented 002-graphite at 423 K, were studied using reflection high-energy electron diffraction (RHEED). Films with mean thickness between 1.5 and 33 ML (monolayers) were studied. Ex situ atomic force microscopy was used to study the morphology and the size distribution of the formed nanocrystals. The as-deposited films grew in the form of three-dimensional crystallites with different shapes and sizes, while those recrystallized from the melt were formed in nearly similar shapes but different sizes. The change in the RHEED pattern with temperature was used to probe the melting …

Density Estimation Using A Generalized Neuron, R. Kiran, Ganesh K. Venayagamoorthy, M. Palaniswami

Electrical and Computer Engineering Faculty Research & Creative Works

Neural networks have been shown to be useful tools for density estimation. However, the training of neural network structures is time consuming and requires fast processors for practical applications. A new method with a generalized neuron (GN) for density estimation is presented in this paper. The GN is trained with the particle swarm optimization algorithm which is known to have fast convergence than the standard backpropagation algorithm. Results are presented to show that the GN can estimate the density functions for distribution functions with different means and variances. This density estimation method can also be applied to the multi-sensor data …

Echo State Networks For Determining Harmonic Contributions From Nonlinear Loads, Joy Mazumdar, Ganesh K. Venayagamoorthy, Frank C. Lambert, Ronald G. Harley

Electrical and Computer Engineering Faculty Research & Creative Works

This paper investigates the application of a new kind of recurrent neural network called Echo State Networks (ESNs) for the problem of measuring the actual amount of harmonic current injected into a power network by a nonlinear load. The interaction between loads connected to a point of common coupling (PCC) is a highly dynamic process. The determination of true harmonic current injection by individual loads is further complicated by the fact that the supply voltage waveform at the PCC is distorted by other loads at the PCC or further upstream and is therefore rarely a pure sinusoid. Harmonics in a …