Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2006

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 2491 - 2520 of 3391

Full-Text Articles in Engineering

Compact Annular-Ring Embedded Circular Patch Antenna With Cross-Slot Ground Plane For Circular Polarisation, Xiulong Bao, Max Ammann Jan 2006

Compact Annular-Ring Embedded Circular Patch Antenna With Cross-Slot Ground Plane For Circular Polarisation, Xiulong Bao, Max Ammann

Articles

A dual-frequency dual-circularly polarised patch antenna with wide beamwidth is proposed. The two-layer structure comprises circular patches with offset circular slots connected to rectangular slots. They provide orthogonal perturbations realising RHCP and LHCP for the lower and upper bands, respectively. The wide beamwidth is realised by extending the substrate beyond the groundplane. Measurements show a maximum beamwidth of 180deg and gains of 3.9 and 0.5 dBic for zenith and 10deg elevation, respectively, for the upper band. The measured beamwidth for the low band is 130deg with a maximum gain of 3.9 and -0.7 dBic for zenith and 10deg elevation, respectively. …

Go to article

Quarter-Wave Metal Plate Solar Antenna, S. Shynu, Max Ammann, Brian Norton Jan 2006

Quarter-Wave Metal Plate Solar Antenna, S. Shynu, Max Ammann, Brian Norton

Articles

A novel design of a quarter-wave shorted trapezoidal metal plate solar antenna using high efficiency polycrystalline silicon solar cells is presented. Using the DC conductive parts of the cell as RF antenna elements as well as choosing the radiating element to be a small base trapezoid, better coupling between the the feed and shorting plates is ensured and 40.3% size reduction compared to a conventional shorted quarter-wave patch is obtained. The trapezoidal radiating element covers merely 2.7% of the total available illumination area of the solar cell, leaving its efficiency essentially unaffected. The proposed design strategy has been verified by …

Go to article

Compact Concentric Annular-Ring Patch Antenna For Triple Frequency Operation, Xiulong Bao, Max Ammann Jan 2006

Compact Concentric Annular-Ring Patch Antenna For Triple Frequency Operation, Xiulong Bao, Max Ammann

Articles

A novel single-layer, single-feed concentric annular-ring microstrip patch antenna providing triple-frequency operation is proposed and experimentally studied. This is achieved by embedding a small circular patch into a dual stub-loaded concentric annular-ring structure and by employing a cross-slot in the ground plane. The proposed technique can provide triple-band operation and reduce the antenna size by over 50% compared to the conventional annular-ring patch antenna for a given frequency. Experimental results show the proposed antenna to have impedance bandwidths of 6.38, 6.30 and 35% for the three bands, at 1.17, 1.428 and 1.9 GHz, respectively. The proposed structure is capable of …

Go to article

From L-Shaped Planar Monopoles To A Novel Folded Antenna With Wide Bandwidth, Giuseppe Ruvio, Max Ammann Jan 2006

From L-Shaped Planar Monopoles To A Novel Folded Antenna With Wide Bandwidth, Giuseppe Ruvio, Max Ammann

Articles

A novel folded monopole antenna is investigated numerically and experimentally. The proposed antenna comprises a short folded monopole suitably shaped at the base with two vertical grounding probes. This small antenna is shown to have a fractional impedance bandwidth up to 125% (1.6 GHz to 7.5 GHz) for a 10 dB return loss. An interesting compromise between impedance bandwidth and pattern control is found by tuning a double side bevel at the base of the monopole, the position of the feeding point and its distance from the ground plane. Measurements and simulations are in good agreement and show a dramatic …

Go to article

All-Fiber Multimode-Interference-Based-Refractometer Sensor:Proposal And Design, Qian Wang, Gerald Farrell Jan 2006

All-Fiber Multimode-Interference-Based-Refractometer Sensor:Proposal And Design, Qian Wang, Gerald Farrell

Articles

A novel all-fiber refractometer sensor is proposed, which is based on multimode interference in the multimode fiber core section sandwiched between two single-mode fibers. A wide-angle beam propagation method in the cylindrical coordinate is employed as the modeling tool for simulation and design of the proposed refractometer sensor. The design for a refractometer is presented that shows that the refractometer would have an estimated resolution of 5.4×10−5 for refractive indices from 1.33 to 1.45 and of 3.3×10−5 for refractive indices from 1.38 to 1.45 through the choice of an appropriate length of the multimode fiber core section.

Go to article

Analysis Of Strain And Intermixing In Single-Layer Ge/Si Quantum Dots Using Polarized Raman Spectroscopy, Anna Baranov, A. V. Federov, Tatiana Perova, R. A. Moore, V. Yam, D. Bouchier, V. Le Thanh, Kevin Berwick Jan 2006

Analysis Of Strain And Intermixing In Single-Layer Ge/Si Quantum Dots Using Polarized Raman Spectroscopy, Anna Baranov, A. V. Federov, Tatiana Perova, R. A. Moore, V. Yam, D. Bouchier, V. Le Thanh, Kevin Berwick

Articles

The built-in strain and composition of as-grown and Si-capped single layers of Ge∕Si dots grown at various temperatures (460–800 °C) are studied by a comparative analysis of the Ge-Ge and Si-Ge modes in the polarized Raman spectra of the dots. A pronounced reduction of the strain and Ge content in the dots after deposition of the cap layer at low temperatures is observed, indicating that strain-induced Si diffusion from the cap layer is occurring. For large dots grown at 700–800 °C the observations are in agreement with a model of the Ge∕Si dot consisting of a Si-rich boundary region and …

Go to article

Design Of One-Dimensional Composite Photonic Crystals With An Extended Photonic Band Gap, Vladimir Tolmachev, Kevin Berwick Jan 2006

Design Of One-Dimensional Composite Photonic Crystals With An Extended Photonic Band Gap, Vladimir Tolmachev, Kevin Berwick

Articles

A technique for photonic band gap (PBG) extension based on mixing photonic crystals with different lattice constants or filling factors is suggested. For the design of photonic crystals with maximal PBG extension the gap map imposition method is utilized. Gap maps for composite photonic crystals based on Si-air structures are calculated and used to predict optimal structures for fabrication.

Go to article

Investigation On Annular-Ring Patch Antenna With Ebg Structure, Xiulong Bao, Giuseppe Ruvio, Max Ammann Jan 2006

Investigation On Annular-Ring Patch Antenna With Ebg Structure, Xiulong Bao, Giuseppe Ruvio, Max Ammann

Conference papers

An annular-ring loaded circular patch antenna with slot-ring array of EBG cells on the ground plane is presented. A comparison is made between the annular ring loaded patch on a conventional PEC groundplane and the same patch on a groundplane with a 2x2, a 4x4 and a 6x6 slot-ring EBG array. It was found that the annular-ring patch antenna with a 4 x 4 slot-ring array in the ground plane is superior in the overall performance (gain, impedance and axial-ratio bandwidth). The array of EBG was found to improve gain by 3.5dB and increase the bandwidth of input impedance by …

Go to article

Generation Of High Quality Audio Natural Emotional Speech Corpus Using Task Based Mood Induction, Charlie Cullen, Brian Vaughan, Spyros Kousidis, Yi Wang, Ciaran Mcdonnell, Dermot Campbell Jan 2006

Generation Of High Quality Audio Natural Emotional Speech Corpus Using Task Based Mood Induction, Charlie Cullen, Brian Vaughan, Spyros Kousidis, Yi Wang, Ciaran Mcdonnell, Dermot Campbell

Conference papers

Detecting emotional dimensions [1] in speech is an area of great research interest, notably as a means of improving human computer interaction in areas such as speech synthesis [2]. In this paper, a method of obtaining high quality emotional audio speech assets is proposed. The methods of obtaining emotional content are subject to considerable debate, with distinctions between acted [3] and natural [4] speech being made based on the grounds of authenticity. Mood Induction Procedures (MIP’s) [5] are often employed to stimulate emotional dimensions in a controlled environment. This paper details experimental procedures based around MIP 4, using performance related …

Go to article

B2b E-Marketplaces In The Airline Industry: A Study On Process Drivers And Performance Indicators, Claudia-Maria Wagner, Bernd Huber, Edward Sweeney Jan 2006

B2b E-Marketplaces In The Airline Industry: A Study On Process Drivers And Performance Indicators, Claudia-Maria Wagner, Bernd Huber, Edward Sweeney

Practitioner Journals

No abstract provided.

Go to article

Recruiting First Year Engineering Undergraduates, Eddie Conlon Jan 2006

Recruiting First Year Engineering Undergraduates, Eddie Conlon

Conference papers

This paper presents findings of three surveys conducted with first year students in the Faculty of Engineering in the Dublin Institute of Technology. It presents evidence on the reasons students study engineering, their sources of information on higher education programmes and the people who influence their decision to do engineering. It shows there are gaps in the students’ knowledge of their programmes and also between their expectations and their experience of their course. Some proposed areas of action are identified to increase both recruitment and retention. It is argued that projecting an image of engineering as a creative activity would …

Go to article

Hand Posture Recognition In Sign Language Using Shape Distributions, Eamonn Young, Gary Clynch Jan 2006

Hand Posture Recognition In Sign Language Using Shape Distributions, Eamonn Young, Gary Clynch

Conference Papers

A shape distribution is a histogram used to uniquely identify different shapes. The histogram is produced by taking random distances on the surface of a shape or object. Theoretically, each shape or object should produce a unique histogram, as the distribution of distances for each shape should be different. Shape distributions have recently been implemented in a number of object recognition areas. They are an attractive method as they are inherently simple, fast and generic. This paper presents the results of research undertaken on the application of shape distributions for the purpose of sign language recognition. There are four main …

Go to article

Rating Requirements Of A Unified Power Quality Conditioner (Upqc) For Voltage Ride Through Capability Enhancement, N. G. Jayanti, Malabika Basu, Michael Conlon, Kevin Gaughan Jan 2006

Rating Requirements Of A Unified Power Quality Conditioner (Upqc) For Voltage Ride Through Capability Enhancement, N. G. Jayanti, Malabika Basu, Michael Conlon, Kevin Gaughan

Conference papers

The problem of voltage ride through capability of fixed speed wind generation as a result of voltage sags is examined by means of a simulation study. The role of a Unified Power Quality Conditioner (UPQC), which provides both shunt and series compensation, in enhancing the ride through capability is investigated under both full and partial voltage restoration. Results of a study to identify the minimum rating requirements to ensure stability are presented.

Go to article

An Experience On Problem Based Learning In An Engineering Faculty, Cüneyt Güzeli̇ş Jan 2006

An Experience On Problem Based Learning In An Engineering Faculty, Cüneyt Güzeli̇ş

Turkish Journal of Electrical Engineering and Computer Sciences

In 2001, Engineering Faculty of Dokuz Eylül University has started to change its undergraduate education in a radical way. As being among the first examples in the world, the Departments of Electrical and Electronics, Geological and Geophysics Engineering in 2002 and Mining Engineering Department in 2003 have adopted the so-called "modular-staged problem based active learning system". The system is based on real engineering problems which values teamwork and the integration of information from different disciplines and it places the student at the center of the learning process. The faculty has learned many things and it needs to learn many other …

Go to article

An International Dialogue On Electrical Engineering Education, Thales Papazoglou Jan 2006

An International Dialogue On Electrical Engineering Education, Thales Papazoglou

Turkish Journal of Electrical Engineering and Computer Sciences

. PAPAZOGLOU Chairman -- ELCOMPEET'04 Technological Educational Institute of Crete, GREECE e-mail: [email protected]

Go to article

Online Learning Resource For Smooth Transition From High School To Engineering Education, Riadh W. Y. Habash, Christine Suurtaam, Mustapha C. E. Yagoub, Karima Kara, Ghanim Ibrahim Jan 2006

Online Learning Resource For Smooth Transition From High School To Engineering Education, Riadh W. Y. Habash, Christine Suurtaam, Mustapha C. E. Yagoub, Karima Kara, Ghanim Ibrahim

Turkish Journal of Electrical Engineering and Computer Sciences

Although high school mathematics curriculum documents in Ontario, Canada have, for the past two decades, made calls for classroom practices involving both modeling and applications, students still experience difficulties in moving into a university engineering program. This paper discusses a new initiative in online learning and the teaching of mathematical modeling and applications in engineering education at the University of Ottawa, Canada. In particular, we explore how modeling and Internet technologies can enhance progress in engineering education.

Go to article

Statistical Computation For Extreme Bridge Traffic Load Effects, Colin C. Caprani, E. J. O'Brien Jan 2006

Statistical Computation For Extreme Bridge Traffic Load Effects, Colin C. Caprani, E. J. O'Brien

Conference papers

The maintenance of highway infrastructure constitutes a major expenditure in many countries. This cost can be reduced significantly by minimizing the repair or replacement of highway bridges. In the assessment of existing bridges, the strength estimate tends to be more accurate than that of traffic loading, due to the more variable nature of loading. Recent advances in the statistical analysis of highway bridge traffic loading have resulted in more accurate forecasts of the actual loading to which a bridge is subject. While these advances require extensive numerical computation, they can significantly improve the accuracy of the calculation. This paper outlines …

Go to article

Including Embodied Energy Considerations At The Conceptual Stage Of Building Design, Y. Yohanis, Brian Norton Jan 2006

Including Embodied Energy Considerations At The Conceptual Stage Of Building Design, Y. Yohanis, Brian Norton

Articles

Elevated operating temperatures reduce the solar to electrical conversion efficiency of building integrated photovoltaic devices (BIPV). Phase change materials (PCM) can be used to passively limit this temperature rise although their effectiveness is limited by their low thermal conductivities and by crystallization segregation during solidification. This paper presents an experimental evaluation of the effects of convection and crystalline segregation in a PCM as a function of efficiency of heat transfer within the finned PV/PCM system. The thermal performances of bulk PCM with crystallization segregation for different internal fin arrangements are presented. It is noted that the addition of internal fins …

Go to article

A Critical Appraisal Of The Roles Of Public Sector Employees In The Provision Of Educational Buildings Under A Public Private Partnership (Ppp) In The Republic Of Ireland, Louis Gunnigan, David Eaton Jan 2006

A Critical Appraisal Of The Roles Of Public Sector Employees In The Provision Of Educational Buildings Under A Public Private Partnership (Ppp) In The Republic Of Ireland, Louis Gunnigan, David Eaton

Conference papers

Public-Private Partnership (PPP) has now become established as a key element in the Irish Government’s strategy in the provision of school buildings. Specific guidelines have been implemented to define the public sector role in a PPP in Ireland and these guidelines represent a significant change in role from those in the traditional schools procurement process. Through a literature review, this paper maps the PPP process and establishes the new tasks that public sector employees must carry out in the adoption of PPP. The new knowledge, skills and competence (KSC) required to carry out these tasks are noted. Whilst existing literature …

Go to article

Towards An Inverse Constant Q Transform, Derry Fitzgerald, Matt Cranitch, Marcin T. Cychowski Jan 2006

Towards An Inverse Constant Q Transform, Derry Fitzgerald, Matt Cranitch, Marcin T. Cychowski

Conference papers

The Constant Q transform has found use in the analysis of musical signals due to its logarithmic frequency resolution. Unfortunately, a considerable drawback of the Constant Q Transform is that there is no inverse transform. Here we show it is possible to obtain a good quality approximate inverse to the Constant Q transform provided that the signal to be inverted has a sparse representation in the Discrete Fourier transform domain. This inverse is obtained through the use of lo and l1 minimisation approaches to project the signal from the constant Q domain back to the Discrete Fourier Transform domain. Once …

Go to article

Shear Repair Of P/C Box Beams Using Carbon Fiber Reinforced Polymer (Cfrp) Fabric, Jim W. Simpson Ii, Issam E. Harik, Choo Ching Chiaw Jan 2006

Shear Repair Of P/C Box Beams Using Carbon Fiber Reinforced Polymer (Cfrp) Fabric, Jim W. Simpson Ii, Issam E. Harik, Choo Ching Chiaw

Kentucky Transportation Center Research Report

The report documents the retrofit work carried out on the KY3297 Bridge over Little Sandy River in Carter County, Kentucky. Field investigation and evaluation revealed that the bridge superstructure was deficient in shear. The repair work was carried out using externally bonded carbon fiber reinforced polymer (CFRP) fabric system. The repair, using externally bonded fiber system, offers the following benefits: (1) the use of light construction equipment, hand kits and tools, (2) minimal traffic disruption as all lanes were open to traffic while work was being performed underneath the bridge, and (3) cost saving; the cost for the repair and …

Go to article

Kentucky Traffic Collision Facts 2006 Report, Kentucky Transportation Center, Kentucky State Police Jan 2006

Kentucky Traffic Collision Facts 2006 Report, Kentucky Transportation Center, Kentucky State Police

Kentucky Transportation Center Research Report

KENTUCKY’S TRAFFIC COLLISION FACTS report for 2006 is based on collision reports submitted to the Kentucky State Police Records Branch. As required by Kentucky Revised Statutes 189.635, “every law enforcement agency whose officers investigate a vehicle accident of which a report must be made...shall file a report of the accident...within ten days after investigation of the accident upon forms supplied by the bureau.” The stated purpose of this requirement is to utilize data on traffic collisions for such purposes as will improve the traffic safety program in the Commonwealth. Data contained in this report are based solely on the observations …

Go to article

Test 1891: Kubota L5030 Diesel, Nebraska Tractor Test Lab Jan 2006

Test 1891: Kubota L5030 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Go to article

Development Of A Software Application To Extract The Features Of Normal Respiratory Sounds From The Lungs And The Trachea, Ranjani Sabarinathan Jan 2006

Development Of A Software Application To Extract The Features Of Normal Respiratory Sounds From The Lungs And The Trachea, Ranjani Sabarinathan

Theses and Dissertations

Auscultation has been widely regarded as one of the most important noninvasive diagnostic tools for clinical diagnosis of the respiratory tract. The purpose of this thesis was to develop a software application capable of extracting the key features of respiratory sound signals from the lungs and trachea of healthy persons. The efficacy of the program was evaluated by the verification of the important features of the sound signals from the left and right lungs and the trachea such as 1) right and left lung symmetry and 2) dissimilarity between the trachea and both lungs. The program was developed in LabView …

Go to article

Test 1881: Mccormick Xtx 200/Mtx 185 Diesel, Nebraska Tractor Test Lab Jan 2006

Test 1881: Mccormick Xtx 200/Mtx 185 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Go to article

Test 1875: Challenger Mt 635b Diesel, Nebraska Tractor Test Lab Jan 2006

Test 1875: Challenger Mt 635b Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Go to article

Test 1878: Challenger Mt 665b Diesel, Nebraska Tractor Test Lab Jan 2006

Test 1878: Challenger Mt 665b Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Go to article

Test 1883: Agco Lt75a Diesel, Nebraska Tractor Test Lab Jan 2006

Test 1883: Agco Lt75a Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Go to article

Test 1889: John Deere 8430t 16 Speed, Nebraska Tractor Test Lab Jan 2006

Test 1889: John Deere 8430t 16 Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Go to article

Interview No. 1656, Robert W. Pitt Jan 2006

Interview No. 1656, Robert W. Pitt

Combined Interviews

Robert Pitt was born in Detroit, MI on November 20, 1933; his family relocated a lot, he first remembers living in Portland, OR, later moved to Phoenix, AZ where he remembers the bombing of Pearl Harbor and followed the progress of World War II at home; he recounts moving to Los Angeles, CA for a year, his time as a batboy for the Los Angeles Angels and his love of baseball; he moved again to Chicago, IL to attend Morgan Park Military Academy, his father died when he was fifteen. Mr. Pitt describes time at Northwestern University in Evanston, IL …

Go to article

First Prev Next Last