Engineering Commons^™

Study Of Discharge Coefficient And Trends In Film Cooling Effectiveness Of Conical Holes With Increasing Diffusion Angles, Humberto Zuniga,

Electronic Theses and Dissertations

Previous studies indicate that increasing the diffusion angle in conical film-cooling holes leads to an improvement in their film cooling effectiveness. Discharge coefficient and film cooling effectiveness measurements are conducted to characterize this behavior. Part of the focus of this investigation is to find out how this trend develops and attempt to ascertain the optimum cone angle, if possible. Six test plates, each with one row of eight conical-shaped cooling holes of equal diffusion angles of 0, 1, 2, 3, 6, or 8 [degrees], with respect to the hole axis are used in this study. The ratios of the hole …

Efficient Large Scale Transient Heat Conduction Analysis Using A Parallelized Boundary Element Method, Kevin Erhart

Electronic Theses and Dissertations

A parallel domain decomposition Laplace transform Boundary Element Method, BEM, algorithm for the solution of large-scale transient heat conduction problems will be developed. This is accomplished by building on previous work by the author and including several new additions (most note-worthy is the extension to 3-D) aimed at extending the scope and improving the efficiency of this technique for large-scale problems. A Laplace transform method is utilized to avoid time marching and a Proper Orthogonal Decomposition, POD, interpolation scheme is used to improve the efficiency of the numerical Laplace inversion process. A detailed analysis of the Stehfest Transform (numerical Laplace …

Meta-Raps: Parameter Setting And New Applications, Seyhun Hepdogan

Electronic Theses and Dissertations

Recently meta-heuristics have become a popular solution methodology, in terms of both research and application, for solving combinatorial optimization problems. Meta-heuristic methods guide simple heuristics or priority rules designed to solve a particular problem. Meta-heuristics enhance these simple heuristics by using a higher level strategy. The advantage of using meta-heuristics over conventional optimization methods is meta-heuristics are able to find good (near optimal) solutions within a reasonable computation time. Investigating this line of research is justified because in most practical cases with medium to large scale problems, the use of meta-heuristics is necessary to be able to find a solution …

Prediction And Allocation Of Live To Virtual Communication Bridging Resources, Stephanie Lackey

Electronic Theses and Dissertations

This document summarizes a research effort focused on improving live-to-virtual (L-V) communication systems. The purpose of this work is to address a significant challenge facing the tactical communications training community through the development of the Live-to-Virtual Relay Radio Prediction Algorithm and implementation of the algorithm into an Integrated Live-to-Virtual Communications Server prototype device. The motivation for the work and the challenges of integrating live and virtual communications are presented. Details surrounding the formulation of the prediction algorithm and a description of the prototype system, hardware, and software architectures are shared. Experimental results from discrete event simulation analysis and prototype functionality …

A Common Component-Based Software Architecture For Military And Commercial Pc-Based Virtual Simulation, Joshua Lewis

Electronic Theses and Dissertations

Commercially available military-themed virtual simulations have been developed and sold for entertainment since the beginning of the personal computing era. There exists an intense interest by various branches of the military to leverage the technological advances of the personal computing and video game industries to provide low cost military training. By nature of the content of the commercial military-themed virtual simulations, a large overlap has grown between the interests, resources, standards, and technology of the computer entertainment industry and military training branches. This research attempts to identify these commonalities with the purpose of systematically designing and evaluating a common component-based …

A Sparse Program Dependence Graph For Object Oriented Programming Languages, Keith Garfield

Electronic Theses and Dissertations

The Program Dependence Graph (PDG) has achieved widespread acceptance as a useful tool for software engineering, program analysis, and automated compiler optimizations. This thesis presents the Sparse Object Oriented Program Dependence Graph (SOOPDG), a formalism that contains elements of traditional PDG's adapted to compactly represent programs written in object-oriented languages such as Java. This formalism is called sparse because, in contrast to other OO and Java-specific adaptations of PDG's, it introduces few node types and no new edge types beyond those used in traditional dependence-based representations. This results in correct program representations using smaller graph structures and simpler semantics when …

Neural Network-Based Output Feedback Controller For Lean Operation Of Spark Ignition Engines, Brian C. Kaul, Jagannathan Sarangapani, J. A. Drallmeier, Jonathan B. Vance, Pingan He

Electrical and Computer Engineering Faculty Research & Creative Works

Spark ignition (SI) engines running at very lean conditions demonstrate significant nonlinear behavior by exhibiting cycle-to-cycle dispersion of heat release even though such operation can significantly reduce NOx emissions and improve fuel efficiency by as much as 5-10%. A suite of neural network (NN) controller without and with reinforcement learning employing output feedback has shown ability to reduce the nonlinear cyclic dispersion observed under lean operating conditions. The neural network controllers consists of three NN: a) A NN observer to estimate the states of the engine such as total fuel and air; b) a second NN for generating virtual input; …

Power System Control With An Embedded Neural Network In Hybrid System Modeling, Seung-Mook Baek, Jung-Wook Park, Ganesh K. Venayagamoorthy

Electrical and Computer Engineering Faculty Research & Creative Works

The output limits of the power system stabilizer (PSS) can improve the system damping performance immediately following a large disturbance. Due to non-smooth nonlinearities from the saturation limits, these values cannot be determined by the conventional tuning methods based on linear analysis. Only ad hoc tuning procedures can been used. A feedforward neural network (FFNN) (with a structure of multilayer perceptron neural network) is applied to identify the dynamics of an objective function formed by the states, and thereafter to compute the gradients required in the nonlinear parameter optimization. Moreover, its derivative information is used to replace that obtained from …

Creating Cross-Over Vehicles: Defining And Combining Vehicle Classes Using Shape Grammars, Seth D. Orsborn, R. Pawlicki, R. Smith, Jonathan Cagan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In the push for new vehicle designs, the distinctions between vehicle classes are quickly becoming blurred. We use shape grammars to quantify the differences between vehicle classes through the application of class-specific rules and the constraint of rule applications to within parametric ranges determined for each class. This allows for the development of new vehicle forms that clearly fall within a class or purposefully cross over the boundaries of classes and mix rules and ranges to create unique and interesting cross-over vehicles.

Effects Of Current On Droplet Generation And Arc Plasma In Gas Metal Arc Welding, J. Hu, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In gas metal arc welding (GMAW), a technology using pulsed currents has been employed to achieve the one-droplet-per-pulse (ODPP) metal transfer mode with the advantages of low average currents, a stable and controllable droplet generation, and reduced spatter. In this paper, a comprehensive model was developed to study the effects of different current profiles on the droplet formation, plasma generation, metal transfer, and weld pool dynamics in GMAW. Five types of welding currents were studied, including two constant currents and three wave form currents. In each type, the transient temperature and velocity distributions of the arc plasma and the molten …

Neural Network Control Of Spark Ignition Engines With High Egr Levels, A. Singh, Brian C. Kaul, J. A. Drallmeier, Jagannathan Sarangapani, Jonathan B. Vance

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Research has shown substantial reductions in the oxides of nitrogen (NOx) concentrations by using 10% to 25% exhaust gas recirculation (EGR) in spark ignition (SI) engines [1]. However under high EGR levels the engine exhibits strong cyclic dispersion in heat release which may lead to instability and unsatisfactory performance. A suite of neural network (NN)-based output feedback controllers with and without reinforcement learning is developed to control the SI engine at high levels of EGR even when the engine dynamics are unknown by using fuel as the control input. A separate control loop was designed for controlling EGR levels. The …

Neuroadaptive Model Following Controller Design For A Nonaffine Uav Model, Nishant Unnikrishnan, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper proposes a new model-following adaptive control design technique for nonlinear systems that are nonaffine in control. The adaptive controller uses online neural networks that guarantee tracking in the presence of unmodeled dynamics and/or parameter uncertainties present in the system model through an online control adaptation procedure. The controller design is carried out in two steps: (i) synthesis of a set of neural networks which capture the unmodeled (neglected) dynamics or model uncertainties due to parametric variations and (ii) synthesis of a controller that drives the state of the actual plant to that of a reference model. This method …

Pulse Charging Of Capacitor Bank By Explosive-Driven Shock Wave Ferroelectric Generator, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Allen H. Stults, Larry L. Altgilbers

Mining Engineering Faculty Research & Creative Works

Ultracompact explosive-driven shock wave ferroelectric generators (FEGs) were used as autonomous primary power sources for charging capacitor banks of different capacitance. The FEGs utilized longitudinal (when the shock wave propagates along the polarization vector P) shock wave depolarization of Pb(Zr₅₂Ti₄₈)O₃ (PZT) polycrystalline ferroelectric ceramic. PZT disks having diameters ranging from 25 to 27 mm and three different thicknesses: 0.65, 2.1, and 5.1 mm. It was experimentally shown that during the charging process the FEGs were capable of producing pulsed power with peak amplitudes up to 0.3 MW. Results for charging voltage, electric charge transfer and …

Mapping Ground Conditions Before The Development Of An Underground Hard Rock Mine - Mcarthur River Uranium Mine Case Study, Derek Apel, P. Szmigiel

Mining Engineering Faculty Research & Creative Works

No abstract provided.

Modeling Net-Centric System Of Systems Using The Dystems Modeling Language Sysml, Rao Madwaraj, Sreeram Ramakrishnan, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

Understanding the operations of a large 'net-centric system-of-systems requires in-depth knowledge of the interfaces among the various systems, sub-systems and components. Architectural modeling can help in reducing the complexity involved in designing such large networked systems. An example of such a complex system is the Global Earth Observation System of Systems (GEOSS) - a system for monitoring and collecting information related to Earth's resources. This paper demonstrates the use of Systems Modeling Language (SysML), which supports specification, analysis, design, verification and validation of a broad range of complex systems, to model some aspects of the GEOSS. The paper discusses issues …

Disinfection Of Swine Wastewater Using Chlorine, Ultraviolet Light And Ozone, John J. Macauley, Zhimin Qiang, Rao Y. Surampalli, Melanie R. Mormile, Craig D. Adams

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Veterinary antibiotics are widely used at concentrated animal feeding operations (CAFOs) to prevent disease and promote growth of livestock. However, the majority of antibiotics are excreted from animals in urine, feces, and manure. Consequently, the lagoons used to store these wastes can act as reservoirs of antibiotics and antibiotic-resistant bacteria. There is currently no regulation or control of these systems to prevent the spread of these bacteria and their genes for antibiotic resistance into other environments. This study was conducted to determine the disinfection potential of chlorine, ultraviolet light and ozone against swine lagoon bacteria. Results indicate that a chlorine …

A Non-Intrusive Polynomial Chaos Method For Uncertainty Propagation In Cfd Simulations, Serhat Hosder, R. Perez, Robert W. Walters

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An inexpensive non-intrusive polynomial chaos (NIPC) method for the propagation of input uncertainty in CFD simulations is presented. The method is straightforward to implement for any stochastic fluid dynamics problem and computationally less expensive than sampling or quadrature based non-intrusive methods. To validate the present NIPC approach, the method has been applied to: (1) an inviscid oblique shock wave problem with geometric uncertainty, (2) an inviscid expansion wave problem with geometric uncertainty, and (3) a subsonic, two-dimensional, laminar boundary layer flow over a flat plate with an uncertain free-stream dynamic viscosity. For all test cases, the statistics (mean and the …

Women, Engineering And Research: Providing Choice And Balance, Cecilia Chan, Mike Murphy

Conference papers

“Research cannot reach its full potential when half the population is excluded from its activities”1. Women researchers in engineering remain a minority in both Higher Education and industry in Ireland. Recent statistics of women graduating in science and engineering indicated an increase (a slow increase) but the numbers moving through to completion of PhD and careers in academia or industry remain quite low. Statistics on women in professorial and senior positions within the engineering sector also remains low. The educated workforce produced in Ireland by its education system is acknowledged as a key factor in attracting international investment to the …

Understanding The European Bologna Process, Michael Dyrenfurth, Mike Murphy

Conference papers

This paper describes the European Bologna process, provides a ‘mid-term’ review of its implementation status and discusses its possible positive and negative impacts on US – European links in the fields of engineering and technology education. The first section of this paper describes the meaning and rationale behind each of the Bologna objectives, and why there is a need to establish a European area of higher education. It also comments on how these objectives are interpreted within educational institutions. The second section provides a mid-term report on the implementation status within European universities, focussed primarily on engineering and technology education. …

Fuel Cell Design For Gas Hydrates Exploration And Research, Gerhard Sauer

Masters

In this thesis the design, manufacture and testing of an Alkaline Fuel Cell (AFC) that provide electrical power to a deep sea measurement problem is described. The fuel cell was designed to operate in a long-term mode at low temperatures. The power required for the measurement probe was in the order of 5 Watts. The measurement probe was designed to operate at a depth of 3000m in sea water at a temperature of approx. 5°C and at 300 bar pressure

the main design issues included: The design of a Fuel Cell to operate at these conditions and produce enough energy …

Design And Development In The Field Of Alkaline Fuel Cell Technology, Steffen Schudt

Masters

This thesis is about the research on alkaline fuel cell (AFC) technology to investigate the long term operation with air. The aim was to solve the two main problems arising from long term operation and especially from operation with air: • Dilution of the liquid electrolyte by the water from the reaction • Cell damage due to the formation of carbonate In recent years the development of fuel cells has gained a growing interest again. However the interest in alkaline fuel cells was low as the polymer electrolyte membrane fuel cell (PEMFC) seemed to be the superior system. One reason …

Controlled Braking Scheme For A Wheeled Walking Aid, Eugene Coyle, Aidan O'Dwyer, Eileen Young, Kevin Sullivan, A. Toner

Conference papers

A wheeled walking aid with an embedded controlled braking system is described. The frame of the prototype is based on combining features of standard available wheeled walking aids. A braking scheme has been designed using hydraulic disc brakes to facilitate accurate and sensitive controlled stopping of the walker by the user, and if called upon, by automatic action. Braking force is modulated via a linear actuating stepping motor. A microcontroller is used for control of both stepper movement and for supervisory control. An encoder is used to supervise walker movement in terms of time, distance and speed.

Analysis Of Complexity And Coupling Metrics Of Subsystems In Large Scale Software Systems, Harish Ramakrishnan

Electronic Theses and Dissertations

Dealing with the complexity of large-scale systems can be a challenge for even the most experienced software architects and developers. Large-scale software systems can contain millions of elements, which interact to achieve the system functionality. Managing and representing the complexity involved in the interaction of these elements is a difficult task. We propose an approach for analyzing the reusability, maintainability and complexity of such a complex large-scale software system. Reducing the dependencies between the subsystems increase the reusability and decrease the efforts needed to maintain the system thus reducing the complexity of the system. Coupling is an attribute that summarizes …

The Effects On Operator Performance And Workload When Gunnery And Robotic Control Tasks Are Performed Concurrently, Carla Joyner

Electronic Theses and Dissertations

The purpose of this research was to examine operator workload and performance in a high risk, multi-task environment. Specifically, the research examined if a gunner of a Future Combat System, such as a Mounted Combat System, could effectively detect targets in the immediate environment while concurrently operating robotic assets in a remote environment. It also analyzed possible effects of individual difference factors, such as spatial ability and attentional control, on operator performance and workload. The experimental conditions included a gunner baseline and concurrent task conditions where participants simultaneously performed gunnery tasks and one of the following tasks: monitor an unmanned …

Design And Fabrication Of A Full-Featured Labscale Hybrid Rocket Engine, Kyle Platt

Electronic Theses and Dissertations

The design, development, integration and testing of a full-featured, Lab-Scale Hybrid Rocket Engine was not only envisioned to be the chosen method of putting student payloads into space, but to be an invaluable teaching resource. The subject of the present thesis is the analysis, design, development, integration and demonstration of a lab-scale hybrid rocket motor. The overarching goal of this project was to establish a working developmental lab model from which further research can be accomplished. The lab model was specifically designed to use a fuel source that could be studied in normal laboratory conditions. As such, the rocket engine …

Automated Adaptive Data Center Generation For Meshless Methods, Eric Mitteff

Electronic Theses and Dissertations

Meshless methods have recently received much attention but are yet to reach their full potential as the required problem setup (i.e. collocation point distribution) is still significant and far from automated. The distribution of points still closely resembles the nodes of finite volume-type meshes and the free parameter, c, of the radial-basis expansion functions (RBF) still must be tailored specifically to a problem. The localized meshless collocation method investigated requires a local influence region, or topology, used as the expansion medium to produce the required field derivatives. Tests have shown a regular cartesian point distribution produces optimal results, however, in …

Analyis Of Airborne Microwave Polarimetric Radiometer Measurements In The Presence Of Dynamic Platform Attitude Errors, Jean Yves Kabore

Electronic Theses and Dissertations

There are numerous applications for airborne imaging systems in remote sensing, and this thesis deals with a new microwave polarimetric radiometer technique for inferring ocean surface wind direction [3, 5, 7]. This technique is based upon the anisotropy of the polarized ocean blackbody emissions at microwave frequencies relative to the azimuth angle between the microwave radiometer antenna "look" direction and the direction of the wind. Because of the weak wind direction signature, it is important that all systematic brightness temperature (Tb) errors be eliminated, especially those that vary with the radiometer antenna scan position (look direction). This can be accomplished …

Polymer-Derived Ceramics: Electronic Properties And Application, Weixing Xu

Electronic Theses and Dissertations

In this work, we studied the electronic behavior of polymer-derived ceramics (PDCs) and applied them for the synthesis of carbon nanotube reinforced ceramic nanocomposites and ceramic MEMS (Micro-Electro-Mechanical Systems) structures. Polymer-derived SiCN ceramics were synthesized by pyrolysis of a liquid polyureasilazane with dicumyl peroxide as thermal initiator. The structural evolution during pyrolysis and post-annealing was studied using FTIR, solid state NMR and Raman. The results revealed that the resultant ceramics consisted of SiCxNx-4 as major building units. These units were connected with each other through C-C/C=C bonds or by shearing N/C. The amount of sp2 free carbon strongly depends on …

Demonstrating Reflectarray Behavior At Infrared, James Ginn

Electronic Theses and Dissertations

Reflectarrays are traditionally passive, planar microstrip antenna devices designed for reflected phase manipulation at each individual antenna element making up the array. By varying the phase response across the surface with the antenna elements, reflectarrays allows a planar surface to exhibit electromagnetically an arbitrary geometry, such as a spherical surface. Initially proposed as a low-cost replacement for bulky parabolic reflectors, reflectarrays have been successfully developed and utilized at both RF and millimeter-wave frequencies. From the standpoint of an optical systems designer, adapting low-frequency reflectarray technology to develop a sub-millimeter and infrared reflectarray (SMIR) would provide a highly desirable alternative to …

Framework For Cost Modeling A Supply Chain, Nabeel Yousef

Electronic Theses and Dissertations

Researchers are interested in value chain analysis to identify the different opportunities for cost savings. The literature have been narrow in scope and addressed specific problems; however none has addressed the need for a general framework that can be used as a standard template in the supply chain cost management and optimization, though Dekker and Goor (2000) said that the goal was to develop a model that would allow direct comparison of specific activities between firms, such as warehousing activities costs. There was no indication in the literature of a cost model that can identify all costs and cost drivers …