Engineering Commons^™

Updated Asabe Standard Manure Excretion Standard, Richard K. Koelsch

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

This newsletter introduces the new ASABE (American Society of Agricultural and Biological Engineers) Standard D384.2, Manure Production and Characteristics. This new standard provides an equation-based approach that integrates animal feeding program and performance into the final estimate of total solids, nitrogen, and phosphorus excretion for seven livestock and poultry species. This article reviews the opportunity this standard provides for improving accuracy of farm-specific nutrient management planning and introduces an educational opportunity for users to be introduced to new software for using the standard.

I propose to conduct one or more workshops on the standard and supporting software tool in June. …

A Reconfigurable Distributed Computing Fabric Exploiting Multilevel Parallelism, Charles L. Cathey, Jason D. Bakos, Duncan A. Buell

Faculty Publications

This paper presents a novel reconfigurable data flow processing architecture that promises high performance by explicitly targeting both fine- and course-grained parallelism. This architecture is based on multiple FPGAs organized in a scalable direct network that is substantially more interconnect-efficient than currently used crossbar technology. In addition, we discuss several ancillary issues and propose solutions required to support this architecture and achieve maximal performance for general-purpose applications; these include supporting IP, mapping techniques, and routing policies that enable greater flexibility for architectural evolution and code portability.

Analytical Modeling And Simulation Of An Auv With Five Control Surfaces, John Tomasi

Masters Theses

This research describes the dynamic modeling and numerical simulation of an autonomous underwater vehicle (AUV) with five hydrodynamic control surfaces, necessary for the development of an autopilot algorithm, based solely upon analytical methodologies. The purpose of this research was to demonstrate the ability to develop a low. order approximation of the dynamics and control characteristics of an underwater vehicle that is complete enough to validate a specific design before physical construction begins; therefore, allowing for a more cost effective virtual design, test, and evaluation process. The AUV model developed in this study takes into consideration inertia, hydrostatic forces, hydrodynamic forces, …

On The Performance Of Imt-2000 Communication Link Based On Stratospheric Platforms, Iskandar Iskandar, Shigeru Shimamoto

Makara Journal of Technology

A new means for providing wireless communication has been currently proposed. It is based on aerial vehicle known as High Altitude Platform or Stratospheric Platforms (SPF). The SPF will be operated at an altitude of 17-22 km above the ground. Therefore, the channel condition may be different compared with those of the conventional terrestrial or satellite wireless channel. In this paper, the channel propagation characteristic of such a system is firstly investigated by means of ray tracing algorithm. We emphasize our investigation in a typical urban environment, in which the mobile users mostly exist. We developed building block model for …

Analysis Of Technical Energy Losses By Using Simulation, Betrianis Betrianis, Randite Herawan

Makara Journal of Technology

Model is a representation of a system. Through model, it can be easier to forecast and control the changing of each element system. Electricity distribution is also a system. Losses are general problem that exist in a distribution network system. But with the right methods, specifically technical energy losses can be reduced in order to increase the efficiency. By making model of the distribution network, the value of technical energy losses in the whole network as well as in every line can be observed. Simulation can also be used to see all losses reduction alternatives. By comparing results from each …

Modeling Of Coupled-Tank System Using Fuzzy Takagi-Sugeno Model, Aries Subiantoro

Makara Journal of Technology

Modeling of Coupled-Tank System Using Fuzzy Takagi-Sugeno Model. This paper describes modeling of coupledtank system based on data measurement using fuzzy Takagi-Sugeno model. The fuzzy clustering method of Gustafson- Kessel algorithm is used to classify input-output data into several clusters based on distance similarity of a member of input-output data from center of cluster. The formed clusters are projected orthonormally into each linguistic variables of premise part to determine membership function of fuzzy Takagi-Sugeno model. By estimating data in each cluster, the consequent parameters of fuzzy Takagi-Sugeno model are calculated using weighted least-squares method. The resulted fuzzy Takagi-Sugeno model is …

Design Of Induction Motor Drive Without Velocity Sensor Using Current Vector Controller With Full And Reduced Observer Moving To Dq Axis, Ridwan Gunawan, Feri Yusivar, Wahidin Wahab, Zuhal A. Kadir

Makara Journal of Technology

Design of Induction Motor Drive Without Velocity Sensor Using Current Vector Controller with Full and Reduced Observer Moving to DQ Axis. The observer is used in estimation velocity sensor usually in α-β axis, therefore this situation will need an extra transformation when we want to add compensator because the flux model is in direct and quadrature-axis dq. Every used the transformation to make possible emerge an error. So in this simulation is used a method to estimate the velocity of induction motor drive with observer that is moved to dq-axis. The model of actual motor used is in alfa-beta axis, …

Hybrid Identification System With Arx And Fast Fourier Transform In Application Of A Quarter Of Vehicle Half Active Suspension, Noveri Lysbetti M, Antonius R.

Makara Journal of Technology

Hybrid Identification System with ARX and Fast Fourier Transform in Application of a Quarter of Vehicle Half Active Suspension. In a control system problem, identification system mechanism is a absolute thing, especially in adaptation controlling to disturbance changing. For that case, is needed an identification method which can identify the changing of disturbance in that system. The aim of this research is to give an alternative in system/plant identification which is a combination (hybrid) of ARX and Fast Fourier Transform. So, it is needed an algorithm design for identification process. In this case, the designed algorithm will be implemented in …

Performance-Metric Driven Atmospheric Compensation For Robust Free-Space Laser Communication, Peter N. Crabtree

Theses and Dissertations

The effect of turbulence on laser propagation is a significant challenge to current electro-optical systems. While atmospheric compensation techniques in space object imaging and high-energy laser weapons have been thoroughly investigated, optimizing these techniques for Laser Communication (LaserCom) has not been examined to the same degree. Average Strehl ratio is the typical design metric for current atmospheric compensation systems. However, fade probability is the relevant metric for LaserCom. This difference motivated the investigation into metric-driven atmospheric compensation. Metric-based tracking techniques for fade mitigation is the first major focus of this research. In a moderate range air-to-air scenario, focal plane spot …

Course Portfolio For Arch333/Cnst305: Building Environmental Technical Systems, Tim Wentz

UNL Faculty Course Portfolios

Due to the critical nature of team-based learning in this course, I propose to study the learning aspects of team-based learning, as I envision it in this course. Not having formally investigated this issue previously, I am left with a sense that some teams perform much better than other teams. I am looking for those criteria that separate the good teams from underperforming teams. Some of the issues that occur to me as I start this process include the following: - Team size - Academic diversity - Discipline diversity - Gender diversity - Geographic diversity How students best learn in …

Boundary Interference Assessment And Correction For Open Jet Wind Tunnels Using Panel Methods, Wael Ahmed Mokhtar

Mechanical & Aerospace Engineering Theses & Dissertations

The presence of nearby boundaries in a wind tunnel can lead to aerodynamic measurements on a model in the wind tunnel that differ from those that would be made when the boundaries of the moving fluid were infinitely far away. The differences, referred to as boundary interference or wall interference, can be quite large, such as when testing aircraft models developing high lift forces, or whose wingspan is a large fraction of the wind tunnel width, or high drag models whose frontal area is a large fraction of the tunnel cross section. Correction techniques for closed test section (solid walled) …

Evaluation Of Time-Varying Availability In Multi-Echelon Spare Parts Systems With Passivation, Hoong Chuin Lau, Huawei Song, Chuen Teck See, Siew Yen Cheng

Research Collection School Of Computing and Information Systems

The popular models for repairable item inventory, both in the literature as well as practical applications, assume that the demands for items are independent of the number of working systems. However this assumption can introduce a serious underestimation of availability when the number of working systems is small, the failure rate is high or the repair time is long. In this paper, we study a multi-echelon repairable item inventory system under the phenomenon of passivation, i.e. serviceable items are passivated (“switched off”) upon system failure. This work is motivated by corrective maintenance of high-cost technical equipment in the miltary. We …

A Comparative Analysis Of Air-To-Ground Engagement Outcomes In The Joint Warfare System (Jwars) And The Jwars-Joint Semi-Automated Forces Federation, Melissa Anne St. Peter

Computational Modeling & Simulation Engineering Theses & Dissertations

Multi-resolution modeling is the process by which a single model is created by connecting multiple individual models to describe phenomena at different levels of resolution [1]. "When we change resolutions, replacing a detailed model by a more aggregate one, we must ask whether results are 'consistent'" [2].

There are many methods of determining if the results of two simulations are 'consistent'. However, they are very entailed and require a detailed understanding of the individual models including their functionality, algorithms, and inner workings. A straight forward and rapid way of assessing potential inconsistencies is through a statistical comparison of the model …

A Markovian Statistical Analysis Of Single-Event Upsets On Closed-Loop Flight Control Systems, Anushka Vishnukumar Lakdawaia

Electrical & Computer Engineering Theses & Dissertations

The operation of aircrafts depend heavily on closed-loop digital flight control systems which can be disrupted or upset by errant neutrons at aircraft flight altitudes. These upsets, called single-event upsets, range from data corruption to short circuits which can potentially cause physical damage to digital devices and unexpected behaviors in flight controls. Experiments conducted at the Los Alamos Neutron Science Center consisted of irradiating an experimental flight control computer (FCC) architecture with a high intensity neutron beam while the FCC controlled a simulation of a Boeing 737. It was postulated that the upset statistics on the FCC could be fitted …

Lung Circulation Modeling: Status And Prospect, Anne V. Clough, Said H. Audi, Robert C. Molthen, Gary S. Krenz

Biomedical Engineering Faculty Research and Publications

Mathematical modeling has been used to interpret anatomical and physiological data obtained from metabolic and hemodynamic studies aimed at investigating structure-function relationships in the vasculature of the lung, and how these relationships are affected by lung injury and disease. The indicator dilution method was used to study the activity of redox processes within the lung. A steady-state model of the data was constructed and used to show that pulmonary endothelial cells may play an important role in reducing redox active compounds and that those reduction rates can be altered with oxidative stress induced by exposure to high oxygen environments. In …

Improving Efficiency In Engineering Design Using Augmented D-Optimal Designs 'Synthetic Jet' Design Optimization Study, Fatih Erdogan

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this thesis is to study the efficiency of several "design of experiments" (DOE) approaches used for the analysis and optimization of engineering designs. A literature review is conducted to study various "design of experiments" methods and the advantages and limitations of each method are discussed.

As an application, Augmented D-Optimal designs are utilized for a design study of 'synthetic jet'.

With the objective of improving efficiency and providing a minimum point experimental design model, computer-aided D-optimal method is preferred for this study. For setting up the design of the experiments and for performing the analysis of results, …

Characterization And Quantum Efficiency Validation Of Ingaas Linear Focal Plane Array, Christopher Salenga Garcia

Electrical & Computer Engineering Theses & Dissertations

A 1x1024 InGaAs linear hybrid focal plane array (FPA) with CMOS readout was characterized at room temperature to analyze its electrical and optical properties and to measure its performance parameters.

The most important parameter of an FPA is the gain constant K, which allows conversion of the FPA output measurement unit from digital counts into the number of generated signal electrons. For FPAs with CMOS readout, the commonly used meanvariance method for determining K often underestimates its value. A more reliable method for finding K is the photon transfer technique, which is developed for FPAs with CCD readout. This …

The Reliability Of The Computer Communication Networks Including Mobile Nodes, Sahin Yasar

Electrical & Computer Engineering Theses & Dissertations

The wireless computer networks have an uncertainty in their structures aside from their big advantages for the users. The environmental conditions, changing locations of the mobile hosts and the changing components in the system can easily affect their reliability. In order to know a system capability performing its functions, keep the reliability at a certain level and/or detect the deficiency of the system, it is necessary to analyze the reliability of a computer communication network including the wired and wireless parts. But the above reasons also make the analysis and a unique solution difficult so a set of algorithms is …

Tuqr: A Topology Unaware Qos Routing Protocol For Manets, Ibrahim Zagli

Electrical & Computer Engineering Theses & Dissertations

In this thesis, the main purpose is to design a new Quality of Service (QoS) Routing Protocol for Mobile ad-hoc Networks that improves packet delivery ratio in QoS constrained communication in comparison to current well known protocols by using distributed multi-path routing. To accomplish that, a new approach to the QoS routing in Mobile ad hoc Networks (MANET) is developed to reduce the effects of the distrustful environment of MANET by keeping a number of suitable paths as high as possible and distributing the decision mechanism among the nodes on the path.

In most current protocols that mainly evaluate and …

Fast Thermal Profiling Of Power Semiconductor Devices Using Fourier Techniques, J. J. Nelson, G. Venkataramanan, Ayman M. El-Refaie

Electrical and Computer Engineering Faculty Research and Publications

Accurate prediction of temperature variation of power semiconductor devices in power electronic circuits is important to obtain optimum designs and estimate reliability levels. Temperature estimation of power electronic devices has generally been performed using transient thermal equivalent circuits. In the presence of varying load cycles, it has been typical to resort to a time-domain electrical simulation tool such as P-Spice or SABER to obtain a time series of the temperature profiles. However, for complex and periodic load cycles, time-series simulation is time consuming. In this paper, a fast Fourier analysis-based approach is presented for obtaining temperature profiles for power semiconductors. …

A Study On Perceptions Of Civil Engineers Regarding Mandatory Continuing Education, Alee A. Sleymann

Dissertations

This study explored the perceptions of civil engineers regarding continuing professional competency requirements for license renewal. In this study,continuing professional competency is assumed to have a direct relationship to public welfare and safety. The policy of mandatory continuing education was adopted primarily for this reason. Currently, mandatory continuing education is adopted by 29 states as the method of assuring continued professional competency.

Many professionals, however, have not welcomed this mandatory continuing education (MCE) policy. The reason for this opposition is the claimed ineffectiveness of this policy in fostering continued competency. In addition, the regulatory boards and policy advocates have not …

Study Of Decarbonization Reaction Of Sodium Carbonate By Sodium Borates, Zaki Yusuf

Dissertations

Today, the chemical process industries are facing many challenges in the wake of skyrocketing energy price. Paper industry as a whole is also not only looking into improving the process efficiency of its chemical recovery process but also is exploring to meet these challenges with gasification based energy/chemical recovery process. Borate based autocausticizing technology appears promising, provided it could be effectively integrated into both types of chemical recovery processes based on the principles of chemistry and chemical engineering.

My research was focused on the decarbonization reactions of sodium carbonate by sodium metaborate (NaBO₂) and sodium diborate (Na_{4 …}

Whole Word Phonetic Displays For Speech Articulation Training, Fansheng Meng

Electrical & Computer Engineering Theses & Dissertations

The main objective of this dissertation is to investigate and develop speech recognition technologies for speech training for people with hearing impairments. During the course of this work, a computer aided speech training system for articulation speech training was also designed and implemented. The speech training system places emphasis on displays to improve children's pronunciation of isolated Consonant-Vowel-Consonant (CVC) words, with displays at both the phonetic level and whole word level. This dissertation presents two hybrid methods for combining Hidden Markov Models (HMMs) and Neural Networks (NNs) for speech recognition. The first method uses NN outputs as posterior probability estimators …

Forest Fire Monitoring Using Multiple Unmanned Air Vehicles, Timothy Mclain, Randal W. Beard, Ryan S. Holt, Joseph W. Egbert, Justin M. Bradley, Clark N. Taylor

Faculty Publications

The ability to gather and process information on the condition of forest fires is essential to fighting the fires in a cost-effective, safe, and efficient manner. While high-altitude, long-endurance (HALE) unmanned air vehicles (UAVs) are currently used for fire surveillance; they are an expensive and scarce resource. As a proposed alternative, low-altitude, short-endurance (LASE) UAVs offer lower costs, quicker response times, and high- resolution information. In recent years, advances in solid-state sensor and autopilot technology have made LASE UAVs a feasible alternative. This paper overviews a current research project conducted by Brigham Young University and NASA Ames. In the project, …

An Analysis Of Indicator Organism Suitability For Lower James And York Rivers, Rhonda Ashonti Ford

Civil & Environmental Engineering Theses & Dissertations

The primary objectives of this thesis are (1) determine if the proper indicator organism is being utilized to determine the bacterial water quality in the State of Virginia. (2) If other environmental factors can predict the bacterial water quality. The current indicator organism of choice for bacterial water quality of waters in the State of Virginia is enterococci, for estuarine and brackish waters. E. coli is the indicator organism of choice for fresh waters in Virginia.

The study concluded (1) Enterococci are the best indicator organism for beaches located in the Hampton Roads Harbor and the Lower James River. (2) …

The Analytic Hierarchy & The Analytic Network Processes In Multicriteria Decision Making: A Comparative Study, Ali K. Taslicali

Engineering Management & Systems Engineering Theses & Dissertations

The objective of this investigation is to identify the critical benefits and factors of decision making models in a changing technological environment. Decision making models are helping tools for the managers or decision makers to make future plans by using qualitative or quantitative data. In this research, a general idea about decision making models and, comparison between the two important models, the Analytical Hierarchy Process (AHP) and the Analytical Network Process (ANP), are introduced. The research was done by using the information in the literature and expert judgment. This paper can be used by academics as a foundation for further …

Crisis Management In Projects, Senol Nazikkol

Engineering Management & Systems Engineering Theses & Dissertations

The objective of this investigation is to identify the processes, benefits and important tools of crisis management in projects. Crisis management is a system that helps managers to prevent and overcome crises. In this research, a general review about crisis, crisis management processes and tools are discussed. The research was done by using the information in the literature and expert judgment. This paper can be used by academics as a foundation for further research and development in the area of crisis management in projects. Managers of projects can use this study for improving their projects and project-based organizations' crisis management …

A Multilane Pipelined Architecture For Real Time Enhancement Of Color Video Streams, Adam Redd Livingston

Electrical & Computer Engineering Theses & Dissertations

Video stream enhancement is a key fixture in a wide variety of applications from video surveillance, automatic navigation, medical imagery, to facial/object recognition systems. When a video stream contains non-uniform lighting it can be difficult to obtain what is in the darker regions without over enhancing brighter regions. The Adaptive and Integrated Neighborhood Dependant Approach for Nonlinear Enhancement (AINDANE) algorithm combines a tunable nonlinear transfer function, convolution by a multi-scale Gaussian kernel, and tunable contrast enhancement to address this problem for a single image. Luminance values are tuned based on the global cumulative distribution function (CDF) of an image. Contrast …

Fixture Design For Load Measurement In Friction Stir Welding, Shekhar S. Kulkarni

Mechanical & Aerospace Engineering Theses & Dissertations

In the Friction Stir Welding Process a vertical force is required for plunging the pin or probe of the tool into the workpiece specimen material, and maintaining contact between the shoulder and the substrate. In addition to the vertical force, Friction Stir Welding Process also involves a horizontal force, which is instrumental for the advancement of the tool as the weld progresses. The essential objective of the thesis was to design, manufacture and test a fixture that can be utilized to measure the vertical force as well as the horizontal force. The designing of the fixture was concerned with various …

Intelligent System Applications Based On Genetic Algorithms, Yasin Volkan Pehlivanoglu

Mechanical & Aerospace Engineering Theses & Dissertations

As a stochastic search method, evolutionary algorithm (EA) is an emergent optimization algorithm mimicking the natural evolution, where a "biological population" evolves over generations to adapt to an environment by selection, recombination, and mutation. When EA is applied to optimization problems, fitness, individual, and genes usually correspond to an objective function value, a design candidate, and design variables, respectively.

One of the key features of EA is that they search from multiple points in design space, instead of moving from a single point as in gradient-based methods. Furthermore, EA works on function evaluations alone and does not require derivatives or …