Engineering Commons^™

Exact Synthesis Of 3-Qubit Quantum Circuits From Non-Binary Quantum Gates Using Multiple-Valued Logic And Group Theory, Guowu Yang, William N. N. Hung, Xiaoyu Song, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

We propose an approach to optimally synthesize quantum circuits from non-permutative quantum gates such as Controlled-Square-Root–of-Not (i.e. Controlled-V). Our approach reduces the synthesis problem to multiple-valued optimization and uses group theory. We devise a novel technique that transforms the quantum logic synthesis problem from a multi-valued constrained optimization problem to a permutable representation. The transformation enables us to utilize group theory to exploit the symmetric properties of the synthesis problem. Assuming a cost of one for each two-qubit gate, we found all reversible circuits with quantum costs of 4, 5, 6, etc, and give another algorithm to realize these reversible …

Guard-Ring Electrode Effects On Crosstalk In Simulated 2d Cmos Compatible Vertical Photodiode Pixel Arrays, Paul Jansz-Dravetzky, Steven Hinckley

Research outputs pre 2011

In this study, we have simulated the electrical crosstalk in back-illuminated and front-illuminated photodiode arrays as a function of substrate thickness and junction depth for single junction photodiode pixels, with and without guard-ring electrodes. The physical mechanisms responsible for electrical crosstalk suppression are explained using an absorption volume proportion concept. The results obtained show that significant crosstalk suppression can be achieved for back-illuminated thin substrate guarded-pixel arrays

Technology Forecasting Using Data Envelopment Analysis, Oliver Lane Inman

Dissertations and Theses

The ability to anticipate future capabilities of technology products has broad implications for organizations. Technological forecasting allows management to improve resource allocation, make better staffing decisions, and more confidently plan facilities and capital expenditures. Technology forecasting may also identify potential new markets and opportunities, such as finding ways to exploit current technology beyond its originally intended purposes.

Modern technology forecasters use an array of forecasting methods to predict the future performance of a technology, such as time-series analysis, regression, stochastic methods, and simulation. These quantitative methods rely on the assumption that past behavior will continue. Shortcomings include their lack of …

Software For Optimizing International Water Resources Management, Richard C. Peralta, S. Wu

Civil and Environmental Engineering Faculty Publications

The Simulation/Optimization MOdeling System (SOMOS) has modules adapted for a range of international water resource management needs. The SOMOA module is best for field groundwater and conjunctive water management situations. It employs several analytical simulation models and several optimization methods to give appropriate optimal guidance for situations having sparse data. SOMOA requires understanding of the limitations of common analytical equations. It does not require experience in finite difference or element numerical modeling. SOMOS also has modules ideal for situations in which there is sufficient data for numerical modeling or aquifer and stream-aquifer systems. Emphasized here are SOMOA and its applications …

Multi-Objective Conjunctive Use Optimization, H. C. Fayad, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

This paper presents a simulation/optimization model based on artificial neural networks and genetic algorithms for solving multi-objective conjunctive water use problems. The model simulates and optimizes water flows in a hydraulically connected reservoir-stream-aquifer system. It is a powerful tool to help water managers and authorities in developing conjunctive water management strategies and evaluating tradeoffs between conflicting goals.

Optimization Modeling For Groundwater And Conjunctive Use Water Policy Development, Richard C. Peralta, R. Shulstad

Civil and Environmental Engineering Faculty Publications

Planners must sometimes decide how to restrict or reduce groundwater use to prevent unacceptable future problems. Often there are several alternatives (policies). Comparing policies can involve formulating a sustained groundwater yield optimization problem and computing an optimal groundwater pumping strategy for each. This is easy via the SOMOS simulation/optimization (S/O) model. Subsequent analysis can include: flow simulation to predict transient water level response to pumping; and economic evaluation to estimate costs and returns. Two examples predict the best consequences of potential physical and legal management policies for alluvial and valley basin fill aquifers hydraulically linked to surface waters. Results show …

Are Microbubbles Necessary For The Breakdown Of Liquid Water Subjected To A Submicrosecond Pulse?, R. P. Joshi, J. Qian, G. Zhao, J. Kolb, K. H. Schoenbach, E. Schamiloglu, J. Gaudet

Electrical & Computer Engineering Faculty Publications

Electrical breakdown in homogeneous liquid water for an ∼ 100 ns voltage pulse is analyzed. It is shown that electron-impact ionization is not likely to be important and could only be operative for low-density situations or possibly under optical excitation. Simulation results also indicate that field ionization of liquid water can lead to a liquid breakdown provided the ionization energies were very low in the order of 2.3eV. Under such conditions, an electric-field collapse at the anode and plasma propagation toward the cathode, with minimal physical charge transport, is predicted. However, the low, unphysical ionization energies necessary for matching …

Comparative Analysis Of Bragg Fibers, Shangping Guo, Sacharia Albin, Robert S. Rogowski

Electrical & Computer Engineering Faculty Publications

In this paper, we compare three analysis methods for Bragg fibers, viz. the transfer matrix method, the asymptotic method and the Galerkin method. We also show that with minor modifications, the transfer matrix method is able to calculate exactly the leakage loss of Bragg fibers due to a finite number of H/L layers. This approach is more straightforward than the commonly used Chew’s method. It is shown that the asymptotic approximation condition should be satisfied in order to get accurate results. The TE and TM modes, and the band gap structures are analyzed using Galerkin method.

Influence Of Antenna Aiming On Ece In Mast, Josef Preinhaelter, Jakub Urban, Pavol Pavlo, Vladimir Shevchenko, Martin Valovič, Linda L. Vahala, George Vahala

Electrical & Computer Engineering Faculty Publications

The effect of the direction of the detected beam on the intensity of ECE is studied. It is found that the combined effects of the strong dependence of the conversion efficiencey of O mode at the plasma resonance on the direction of the incident wave and the partial screening of the beam waist by the MAST vessel wall, can be responsible for the weakening of ECE emission for some frequencies. The theoretical model for ECE data interpretation on MAST has been significantly improved. New features of the model are as follows: the quasioptical treatment of the receiving antenna, interference, polarization …

Power Consideration In The Pulsed Dielectric Barrier Discharge At Atmospheric Pressure, M. Laroussi, X. Lu, V. Kolobov, R. Arslanbekov

Electrical & Computer Engineering Faculty Publications

Nonequilibrium, atmospheric pressure discharges are rapidly becoming an important technological component in material processing applications. Amongst their attractive features is the ability to achieve enhanced gas phase chemistry without the need for elevated gas temperatures. To further enhance the plasma chemistry, pulsed operation with pulse widths in the nanoseconds range has been suggested. We report on a specially designed, dielectric barrier discharge based diffuse pulsed discharge and its electrical characteristics. Two current pulses corresponding to two consecutive discharges are generated per voltage pulse. The second discharge, which occurs at the falling edge of the voltage pulse, is induced by the …

Quantum Lattice Representation Of Dark Solitons, George Vahala, Linda L. Vahala, Jeffrey Yepez

Electrical & Computer Engineering Faculty Publications

The nonlinear Schrodinger (NLS) equation in a self-defocusing Kerr medium supports dark solitons. Moreover the mean field description of a dilute Bose-Einstein condensate (BEC) is described by the Gross-Pitaevskii equation, which for a highly anisotropic (cigar-shaped) magnetic trap reduces to a one-dimensional (1D) cubic NLS in an external potential. A quantum lattice algorithm is developed for the dark solitons. Simulations are presented for both black (stationary) solitons as well as (moving) dark solitons. Collisions of dark solitons are compared with the exact analytic solutions and coupled dark-bright vector solitons are examined. The quantum algorithm requires 2 qubits per scalar field …

Qos Routing Optimization Strategy Using Genetic Algorithm In Optical Fiber Communication Networks, Zhaoxia Wang, Zengqiang Chen, Zhuzhi Yuan

Research Collection School Of Computing and Information Systems

This paper describes the routing problems in optical fiber networks, defines five constraints, induces and simplifies the evaluation function and fitness function, and proposes a routing approach based on the genetic algorithm, which includes an operator [OMO] to solve the QoS routing problem in optical fiber communication networks. The simulation results show that the proposed routing method by using this optimal maintain operator genetic algorithm (OMOGA) is superior to the common genetic algorithms (CGA). It not only is robust and efficient but also converges quickly and can be carried out simply, that makes it better than other complicated GA.

Luminescence In Zno, Jin Xu

Theses and Dissertations

As a wide band semiconductor with a large binding energy (about 60meV), ZnO is a promising candidate semiconductor material for the next generation of optoelectronic , light emission or high power and high frequency devices. In order to make electrical device from ZnO, it is necessary to investigate optical properties of ZnO.In this thesis, PL setup and the properties of ZnO are introduced briefly and the optical properties of ZnO are investigated in detail. Temperature dependence of PL spectra of ZnO are measured and analyzed. Sharp emission line of PL spectra of rare earth (RE) doped ZnO are also investigated.

High Quality Zno Epitaxial Grown By Plasma Assisted Molecular Beam Epitaxy, Yun Zhang

Theses and Dissertations

Described in this thesis are the growth and characterization of high quality ZnO epitaxy layers.Zinc oxide (ZnO) epitaxy layers were grown on sapphire and epi-GaN substrates respectively, using plasma assisted molecular beam epitaxy (MBE) . Various growth conditions, such as growth temperature, II/VI ratio, and buffer layers, were employed to optimize the quality of the ZnO film. The subsequent characterization of the films was carried out to evaluate the surface, optical and crystalline properties of the film, using AFM, SEM, PL and XRD techniques. It was found out that the high quality of the ZnO film was grown on epi-GaN …

Incorporation Of Tetracycline Hydrochloride Into Electrospun Fibrinogen: A Study Of Mechanical Properties And Time Release, Charles Dudley Anderson Jr.

Theses and Dissertations

Electrospinning has the capacity to create fibers of natural or synthetic polymers with dimensions that are similar to analogous fibers in native tissue. Mats consisting of fibers of these sub-micron dimensions have shown promise in provoking little immune response and in offering a habitable environment for cell proliferation. Fibrinogen is a natural protein capable of being electrospun and offers the benefit of existing as part of the natural coagulation cascade. Mats of fibrinogen could be utilized as possible hemostatic dressings or as an early scaffold for cell migration for either wound repair or tissue engineering. The addition of antibiotic into …

Gan Epitaxy On Melt Grown Thermally Prepared Bulk Zno Substrates, Xing Gu

Theses and Dissertations

Different methods were developed for the preparation of bulk ZnO substrates. Remarkable improvement on the surface, optical and crystalline quality of the bulk ZnO substrate was achieved. ZnO substrates with an atomically flat surface exhibiting terrace-like features were used as a substrate for GaN grown by MBE. High-resolution x-ray diffraction and low temperature PL results show that similar high quality GaN layers can be achieved on both annealed O-face and Zn-face ZnO substrates. The prospect of the device applications of GaN epitaxy on ZnO, including AlGaN/GaN MODFET structure on ZnO and GAN/ZnO based p-n junction were discussed.

Iii-Nitride Semiconductors Grown By Plasma Assisted Molecular Beam Epitaxy, Lei He

Theses and Dissertations

III-nitride semiconductors are of great interest owing to their commercial and military applications due to their optoelectronic and mechanical properties. They have been synthesized successfully by many growth methods. Among them, molecular beam epitaxy (MBE) is a promising epitaxial growth method owing to precise control of growth parameters, which significantly affect the film properties, composition, and thickness. However, the understanding of growth mechanism of III-nitride materials grown in this growth regime is far from being complete.In this dissertation, GaN and AIGaN growth mechanism under metal-rich conditions were investigated. The Ga surface desorption behavior during the growth was investigated systematically using …

Novel Apparatus To Control Electrospinning Fiber Orientation For The Production Of Tissue Engineering Scaffolds, Eugene David Boland

Theses and Dissertations

The conception of electrospinning can trace its roots back more than 400 years, when it was observed that rubbed amber can deform a droplet of water on a smooth surface, and is based upon simple concepts of charge separation and surface tension. Since that time, considerable effort has been directed at both the cause and utility of this phenomenon. The specific aim of this dissertation project was to develop an automated electrostatic processing apparatus that was capable of controlling the three-dimensional architecture of an electrospun scaffold to further improve its utility in tissue engineering. The efficacy of using this technique …

Loss And Dispersion Analysis Of Microstructured Fibers By Finite-Difference Method, Shangping Guo, Feng Wu, Sacharia Albin, Hsiang Tai, Robert S. Rogowski

Electrical & Computer Engineering Faculty Publications

The dispersion and loss in microstructured fibers are studied using a full-vectorial compact-2D finite-difference method in frequency-domain. This method solves a standard eigen-value problem from the Maxwell’s equations directly and obtains complex propagation constants of the modes using anisotropic perfectly matched layers. A dielectric constant averaging technique using Ampere’s law across the curved media interface is presented. Both the real and the imaginary parts of the complex propagation constant can be obtained with a high accuracy and fast convergence. Material loss, dispersion and spurious modes are also discussed.

Improved Opportunity Cost Algorithm For Carrier Selection In Combinatorial Auctions, Viswanath Uma Gnanasekaran

LSU Master's Theses

Transportation costs constitute up to thirty percent of the total costs involved in a supply chain. Outsourcing the transportation service requirements to third party logistics providers have been widely adopted, as they are economically more rational than owning and operating a service. Transportation service procurement has been traditionally done through an auctioning process where the auctioneer (shipper) auctions lanes (distinct delivery routes) to bidders (carriers). Individual lanes were being auctioned separately disallowing the carriers to express complements and substitutes. Using combinatorial auctions mechanism to auction all available lanes together would allow the carriers to take advantage of the lane bundles, …

Numerical Simulation And Field Verification Of Inclined Piezocone Penetration Test In Cohesive Soils, Lei Wei

LSU Doctoral Dissertations

A large strain finite element analysis is performed to analyze the effect of soil anisotropy on the inclined piezocone penetration test in normally consolidated cohesive soils. The piezocone penetration is numerically simulated using the commercial finite element code ABAQUS. The saturated clay is modeled as a two-phase material and the effective stress principle is used to describe its behavior. A frictional contact interface utilizing Mohr-Coulomb's theory was chosen to represent interactions between the surface of the cone and the soil. The Anisotropic Modified Cam Clay Model (AMCCM) by Dafalias (1987) was chosen and implemented into ABAQUS through user subroutine UMAT. …

Tissue Interactions With Lasers And Liquid Nitrogen: A Novel Cryopreservation Method, Deepak Kandra

LSU Master's Theses

The importance of the imposed cooling rate in cryopreserving native cells and tissues has been long recognized in the field of cryobiology. When biological tissues are subjected to cooling rates in excess of thousands of degree C per minute, the characteristic structural and physical manifestations of the ice formed are such that the traditional damage due to ice formation at lower cooling rates are suppressed. Hence, achieving high cooling rates in tissues and cells of biologically relevant sizes (mm’s and cm’s) has been a long standing research problem. In the present study, we present a novel technique to achieve high …

Color, Texture And Rehydration Characteristics Of Ohmically Treated Sweet Potatoes, Sireesha Bhattiprolu

LSU Master's Theses

Ohmic heating has been shown to affect the drying rate and texture of foods. This research was designed to determine the effect of ohmic heating on rehydration, color and texture properties of sweet potatoes. Three combinations: 60Hz, 40V, 60Hz, 60V and 1Hz, 40V were applied to ohmically heat sweet potato cubes. The ohmic treated cubes and untreated cubes or controls were stored for six days in four different %relative humidities of 11.15%, 32.73%, 57.70% and 75.32%. Results showed that there was no significant difference in the rehydration properties of ohmic treated samples and control samples. The % moisture gain varied …

Heat/Mass Transfer In Smooth And Ribbed Rectangular Serpentine Passages Of Different Aspect Ratio's And Orientation, Peeyush Agarwal

LSU Master's Theses

An experimental study of heat/mass transfer in rectangular smooth and ribbed serpentine passages with and without rotation in two different aspect ratios (1:4 and 4:1) channel is performed for two different orientations of the test section (90-degree and 45-degree). The Reynolds number is varied in the range of 5,000 to 40,000 and rotation numbers in the range of 0-0.12. Such passages are encountered close to the mid-chord sections or towards the trailing edge of the turbine blade. Two different configurations of the Normal ribs (e/D_h=0.3125, P/e=8 and e/D_h=0.156, P/e=11.2) are placed on the leading and the …

Mems Accelerometer: Proof Of Concept For Geotechnical Engineering Testing, Keith Nicholas Hoffman

LSU Master's Theses

Geotechnical engineering materials are inherently variable, which leads to many simplifications when trying to model their behavior. The materials must always be characterized prior to any design work so that the engineer knows which direction he must progress to have a reliable design. Although subsurface characterization techniques and geotechnical design steadily improve, they are by no means infallible. The combination of geotechnical subsurface characterization along with geophysical techniques for improved design and construction monitoring has begun to surface as a viable alternative to the standard techniques in geotechnical engineering. This is important because there is a lack of Quality Control/Quality …

Photo-Control Of Dna Oligonucleotides With Cage Compounds, Bilal Ghosn

LSU Master's Theses

Many biochemical processes in which DNA and other nucleic acids participate are central to functions in both living cells and in molecular biology assays. While many compounds have been used to regulate the activity of DNA, these strategies are limited to the aqueous-based diffusion of the activator to the target DNA molecule. An improvement to the induction of DNA bioactivity is to move to a light-based modulation. This research demonstrates a light-based technique using a photo-cleavable cage compound to transiently inactivate DNA hybridization. Function can be restored with exposure to near-UV light, allowing for temporal control of DNA oligonucleotide (ODN) …

Synthesis, Characterization And Tribological Behavior Of Nitrogen-Doped Chromium-Diamond-Like Carbon Nanocomposite Thin Films, Sunil Kumar Pal

LSU Master's Theses

Diamond-like carbon (DLC) films have been extensively studied for more than two decades due to their highly attractive properties. These films exhibit unique mechanical, chemical and electronic properties and thus, possess great potential for applications in tribology. However, two drawbacks in the DLC films are high level of internal stress developed during growth preventing deposition of thick films and low thermal stability. Synthesis of Me-DLC (Cr-DLC and N-doped Cr-DLC) presents a way to overcome these drawbacks. In the present study, DLC, Cr-DLC and N-doped Cr-DLC films were deposited on Si substrate using a hybrid Plasma assisted CVD/PVD process. Film characterization …

An Evaluation Of Methods Used To Obtain The Railroad Preemption Queue Clearance Time, Deeangela Renee Kenon

LSU Master's Theses

Because of the potential for serious train-vehicle accidents at or near railroad-highway grade crossings, preemption of traffic signals is a very important supplement to an active warning system. Preemption is the transfer of normal signal phasing to a special control mode with the purpose of clearing any vehicles that are queued within the dynamic envelope as the train approaches, and prohibiting signal phases that would allow additional vehicles in the track area while the train is present. The focus of this research was the determination of the Clear Track Green Interval (or the Queue Clearance Time). The clear track green …

Modeling Event-Based Coupled Hydrologic And Mass Transport In Small Urban Watersheds, Yuhong Sheng

LSU Doctoral Dissertations

To investigate the event-based coupled hydrologic and mass transport processes of particulate matter and their eventual fate in unit operations/processes, several methodologies were developed. Discrete rainfall-runoff events data were collected at two similar urban watersheds for model calibration and verification. A mathematically and physically-based criterion was proposed to differentiate rainfall-runoff events between either mass-limited or flow-limited. Statistical techniques of Logistic Regression and Discriminant Analysis were utilized to derive classification rules for event categories based on hydrologic data only. With watersheds assumed as either lumped systems or distributed systems, physically-based semi-empirical models were developed to simulate particulate mass delivery process during …

Design And Performance Of Electric Shock Absorber, Oly D. Paz

LSU Master's Theses

The electric shock absorber is a device that converts the kinetic energy of an oscillating object into electric energy. This kinetic energy is normally dumped in a form of thermal energy in a conventional, mechanical shock absorber. The electric shock absorber consists of a permanent magnet linear synchronous generator (PMLSG), a spring, and an electric energy accumulator. The major goal of the project is to design and analyze the operation of an electric shock absorber. In order to define the initial requirements that the electric shock absorber has to satisfy, the construction and performance of currently used shock absorbers were …