Engineering Commons^™

Analysis And Integration Of A Debris Model In The Virtual Range Projec, Luis Robledo

Electronic Theses and Dissertations

After the accident of the STS 107 Columbia Space Shuttle, great concern has been focused on the risk associated to the population on the ground. Before this accident happened, re-entry routes as well as risk calculation of were not of public concern. Two issues that have been raised from this lamentable accident relate to spacecraft security and to public safety. The integration of a debris model has been part of the original conceptual architecture of the Virtual Range Project. Its integration has been considered as a specific research due to the complexity of the models and the difficulties to obtain …

Versatility And Customization Of Portable Cmm In Reverse Engineering A, Amar Raja Thiraviam

Electronic Theses and Dissertations

Reverse engineering is the technique of gathering scientific knowledge about a part by physically examining it. In the computer aided manufacturing world this is referred to as Part to CAD conversion, where the geometry of physical objects are being captured as Digital 3-D CAD Data. This is vital not only to produce drawing of parts for which no CAD data exists, but also is frequently being used to produce better designs. The industry professionals to achieve this are frequently using Coordinate Measuring Machine [CMM] among other tools. The purpose of this thesis is to demonstrate the versatility of portable CMM …

Evaluation Of A Microwave Radiative Transfer Model For Calculating Sat, Simonetta Thompson

Electronic Theses and Dissertations

Remote sensing is the process of gathering and analyzing information about the earth's ocean, land and atmosphere using electromagnetic "wireless" techniques. Mathematical models, known as Radiative Transfer Models (RTM), are developed to calculate the observed radiance (brightness temperature) seen by the remote sensor. The RTM calculated brightness temperature is a function of fourteen environmental parameters, including atmospheric profiles of temperature, pressure and moisture, sea surface temperature, and cloud liquid water. Input parameters to the RTM model include data from NOAA Centers for Environmental Prediction (NCEP), Reynolds weekly Sea Surface Temperature and National Ocean Data Center (NODC) WOA98 Ocean Salinity and …

Thermal Management, Beam Control,And Packaging Designs For High Power, Te-Yuan Chung

Electronic Theses and Dissertations

Several novel techniques for controlling, managing and utilizing high power diode lasers are described. Low pressure water spray cooling for a high heat flux system is developed and proven to be an ideal cooling method for high power diode laser arrays. In order to enable better thermal and optical performance of diode laser arrays, a new and simple optical element, the beam control prism, is invented. It provides the ability to accomplish beam shaping and beam tilting at the same time. Several low thermal resistance diode packaging designs using beam control prisms are proposed, studied and produced. Two pump cavity …

Analysis Of Fading Characteristics Of A Free Space Optical Channel, Roger Douglas Halbing

Retrospective Theses and Dissertations

In this thesis we shall consider how well the gamma-gamma theory models the fading of experimental data obtained from two line of sight experiments of 1km and 13km. Frequency Analysis of the intensity fluctuations collected from the different aperture sizes will be compared to the two-scale theory of the gamma-gamma model. Statistical analysis of the channel intensity for different aperture sizes will be performed and the results will be compared to the gamma-gamma theory to determine if the gamma-gamma model is valid over greater distances than has previously been investigated .

Minimization Of Power Dissipation In Digital Circuits Using Pipelining And A Study Of Clock Gating Technique, Ranganath Panchangam

Electronic Theses and Dissertations

Power dissipation is one of the major design issues of digital circuits. The power dissipated by a circuit affects its speed and performance. Multiplier is one of the most commonly used circuits in the digital devices. There are various types of multipliers available depending upon the application in which they are used. In the present thesis report, the importance of power dissipation in today's digital technology is discussed and the various types and sources of power dissipation have been elaborated. Different types of multipliers have been designed which vary in their structure and amount of power dissipation. The concept of …

Nitrification Investigation And Modeling In The Chloraminated Drinking Water Distribution System, Suibing Liu

Electronic Theses and Dissertations

This dissertation consists of five papers concerning nitrification in chloraminated drinking water distribution systems in a one and a half year field study. Seven finished waters were produced from different treatment processes and distributed to eighteen pilot distribution systems (PDSs) that were made pipes taken from actual distribution systems. Unlined cast iron (UCI), galvanized steel (G), lined cast iron (LCI), and PVC pipes were used to build the PDSs. All finished waters were stabilized and chloraminated before entering the PDSs. This dissertation consists of five major parts. (1) System variations of nitrates, nitrites, DO, pH, alkalinity, temperature, chloramine residuals and …

Study For Development Of A Blast Layer For The Virtual Range Project, Sergio Rosales

Electronic Theses and Dissertations

In this work we develop a Blast-Propellant-Facility integrated analysis study, which evaluates, by using two different approaches, the blast-related impact of an explosive accident of the Space Shuttle during the first ten seconds after launch at Kennedy Space Center. The blast-related risk associated with an explosion at this stage is high because of the quantity of energy involved in both multiple and complex processes. To do this, one of our approaches employed BlastFX®, a software system that facilitates the estimation of the level of damage to people and buildings, starting from an explosive device and rendering results through a complete …

Evaluation Of The Impacts Of Its Information Strategies On I-4 Corridor, Yueliang Zuo

Electronic Theses and Dissertations

This study evaluated the impacts of ITS information strategies under incident conditions in Interstate 4 (I-4) corridor of Orlando. The analysis was performed using DYNASMART-P software package. The ITS information strategies range from pre-trip information, en-route information, and variable message signs. Simulation covered one hour during the morning peak period. The impacts of ITS information strategies on mobility were evaluated by simulating the performance of various ITS information components (pre-trip information, en-route information, and variable message signs) under incident conditions for the I-4 corridor and comparing the results with the corresponding scenarios in the absence of these components. The traffic …

Autonomous Environmental Mapping In Multi-Agent Uav Systems, Linus Jan Luotsinen

Electronic Theses and Dissertations

UAV units are by many researchers and aviation specialists considered the future and cutting edge of modern flight technology. This thesis discusses methods for efficient autonomous environmental mapping in a multi-agent domain. An algorithm that emphasizes on team work by sharing the agents local map information and exploration intentions is presented as a solution to the mapping problem. General theories on how to model and implement rational autonomous behaviour for UAV agents are presented. Three different human and tactical behaviour modeling techniques are evaluated. The author found the CxBR paradigm to be the most interesting approach. Also, in order to …

Processing, Microstructural And Mechanical Characterization Of Mechanically Alloyed Al-Al2o3 Nanocomposites, Pushkar Katiyar

Electronic Theses and Dissertations

Aluminum-alumina nanocomposites were synthesized using mechanical alloying of blended component powders of pure constituents. This study was performed on various powder mixtures with aluminum as the matrix and alumina as the reinforcement with volume fractions of 20, 30, and 50 % and Al2O3 particle sizes of 50 nm, 150 nm, and 5 µm. X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques were used for the crystal structure and microstructural characterization of the powders at different stages of milling. Al2O3 powders with 50 nm and 150 nm particle size were predominantly of γ-type, while Al2O3 of 5 µm size was …

Cryptarray A Scalable And Reconfigurable Architecture For Cryptographic Applications, Michael John Lomonaco

Electronic Theses and Dissertations

Cryptography is increasingly viewed as a critical technology to fulfill the requirements of security and authentication for information exchange between Internet applications. However, software implementations of cryptographic applications are unable to support the quality of service from a bandwidth perspective required by most Internet applications. As a result, various hardware implementations, from Application-Specific Integrated Circuits (ASICs), Field-Programmable Gate Arrays (FPGAs), to programmable processors, were proposed to improve this inadequate quality of service. Although these implementations provide performances that are considered better than those produced by software implementations, they still fall short of addressing the bandwidth requirements of most cryptographic applications …

Quantization With Knowledge Base Applied To Geometrical Nesting Problem, Grzegorz Chmaj, Leszek Koszalka

Electrical & Computer Engineering Faculty Research

Nesting algorithms deal with placing two-dimensional shapes on the given canvas. In this paper a binary way of solving the nesting problem is proposed. Geometric shapes are quantized into binary form, which is used to operate on them. After finishing nesting they are converted back into original geometrical form. Investigations showed, that there is a big influence of quantization accuracy for the nesting effect. However, greater accuracy results with longer time of computation. The proposed knowledge base system is able to strongly reduce the computational time.

Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Allen L. Johnson, Dale L. Perry

Transmutation Sciences Materials (TRP)

There is an active international interest in lead-bismuth eutectic and similar liquid lead systems because of the relevance to the transmutation of nuclear waste, fast reactors, and spallation neutron sources. A successful program in nuclear waste processing that includes transmutation in accelerator-driven systems and fast reactors, would significantly decrease the space requirements for geological repositories.

Materials in these systems must be able to tolerate high neutron fluxes, high temperatures, and chemical corrosion. For lead bismuth eutectic (LBE) systems, there is an additional challenge because the corrosive behaviors of materials in LBE are not well understood. Most of the available information …

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The primary objective of this task is to evaluate the effect of environmental and mechanical parameters on environment induced degradations of candidate target structural materials for applications in spallation-neutron-target systems, such as accelerator-driven systems for the transmutation of waste. The materials selected for evaluation and characterization are martensitic stainless steels including Alloys HT-9, EP-823 and Type 422 stainless steel (SS).

More recently, this experimental program has been expanded to evaluate the effect of molten lead-bismuth eutectic (LBE) on the corrosion behavior of target structural materials in the presence of oxygen. Since the Materials Performance Laboratory (MPL) at UNLV currently cannot …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The corrosion of structural materials is a major concern for the use of lead-bismuth eutectic (LBE) systems for nuclear applications such as in transmuter targets or fast reactors. Corrosion in liquid metal systems can occur through various processes, including, for example, dissolution, formation of inter-metallic compounds at the interface, and penetration of liquid metal along grain boundaries. Predicting the rate of these processes depends on numerous system operational factors: temperature, system geometry, thermal gradients, solid and liquid compositions, and velocity of the liquid metal, to name a few. Corrosion, along with mechanical and/or hydraulic factors, often contributes to component failure. …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The focus of this work is to determine the effect of elevated temperatures on the tensile properties of Alloy EP-823 and other martensitic alloys having similar compositions. The information obtained through this work describing the mechanism of elevated-temperature deformation will assist in developing suitable target structural materials possessing enhanced LBE corrosion resistance at process temperatures, allowing the continued development and eventual deployment of these technologies.

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic, Yingtao Jiang, Bingmei Fu, Woosoon Yim

Transmutation Sciences Materials (TRP)

Lead-bismuth eutectic (LBE) is a candidate as a spallation target in sub-critical transmutation systems and as a coolant in nuclear programs. One of the primary concerns with LBE systems is the corrosion of stainless steel, the primary structural material used in nuclear systems. To mitigate this problem, trace levels of oxygen can be introduced into the system, causing the formation of a protective oxide layer at the interface between the LBE and steel. To protect the steel components, this oxide layer must be properly maintained. However, too much oxygen will produce unwanted oxide precipitation within the coolant and elsewhere in …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements, Ajit K. Roy

Transmutation Sciences Materials (TRP)

Metals and alloys, when subjected to tensile loading beyond a limiting value, can undergo plastic deformation resulting in lattice defects such as voids and dislocations. These imperfections may interact with the crystal lattice, producing a higher state of internal stresses characterized by reduced ductility. Residual stresses can also be generated in welded structures due to rapid rate of solidification, and dissimilar metallurgical microstructures between the weld and the base metals. Premature failures can be experienced in engineering metals and alloys due to the presence of these residual stresses. Specific thermal treatments commonly known as stress relief operations can relieve these …

Development Of Nanostructure Based Corrosion-Barrier Coatings On Steel For Transmutation Applications: Quaterly Report, Biswajit Das

Transmutation Sciences Materials (TRP)

During the past quarter, this project employed one graduate student and two undergraduate student researchers and made the following accomplishments :

• Acquisition of steel samples for experiments

• Design and fabrication of specialized anodization apparatus to accommodate steel samples

• Investigation of adhesiveness of aluminum on steel

• Investigation of effects of anodizing acids on steel to identify most appropriate acid and a suitable barrier material

Stress Corrosion Cracking Of Target Material, Mohammad K. Hossain

Transmutation Sciences Materials (TRP)

The primary objective of this paper is to evaluate the effect of hydrogen on environment assisted cracking of candidate target materials for transmutation applications. Transmutation refers to transformation of long-lived actinides and fission products from spent nuclear fuels (SNF), and occurs when the nucleus of an atom changes because of natural radioactive decay, nuclear fission, nuclear fusion, neutron capture, or other related processes. Martensitic Alloy EP 823 was selected to be the candidate alloy for this investigation. During the initial phase, the stress corrosion cracking (SCC) behavior of this alloy was evaluated in neutral (pH: 6-7) and acidic (pH: 2-3) …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Darrell Pepper, Sean Hsieh

Separations Campaign (TRP)

The chemical processing of used nuclear fuel is an integral component of any strategy for the transmutation of nuclear waste. Due to the large volume of material that must be handled in this first step of the transmutation process, the efficiency of the separations process is a key factor in the potential economic viability of the transmutation strategies. The ability to optimize the chemical separation systems is vital to ensure the feasibility of the transmutation program.

Systems analysis, or total systems modeling, is one of the strongest tools available to researchers for understanding and optimizing complex systems such as chemical …

Nuclear Criticality, Shielding, And Thermal Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth

Separations Campaign (TRP)

The first step in any transmutation strategy is the separation of radionuclides in used nuclear fuel. The current separation strategy supporting the Advanced Fuel Cycle Initiative (AFCI) program is based on the use of a solvent extraction separation process to separate the actinides, fission products, and uranium from used commercial nuclear fuel, and on the use of pyrochemical separation technologies to process used transmuter fuels. To separate the fission products and transuranic elements from the uranium in used fuel, the national program is developing a new solvent extraction process, the Uranium Extraction Plus, or UREX+, process based on the traditional …

Fundamental Chemistry Of U And Pu In The Tbp-Dodecane-Nitric Acid System: Quaterly Report, Kenneth Czerwinski, Byron Bennett

Separations Campaign (TRP)

The speciation of hexavalent U and tetravalent Pu will be examined in the TBP-dodecane- nitric acid systems. This topic is chosen based on data needs for separation modeling identified by the AFCI. Emphasis will be placed on studying the influence of nitrate and acetohydroxamic acid on U and Pu speciation as well as conditions where a third phase forms in the organic phase. The organic phase will be 30 % TBP in dodecane. Equal volumes of aqueous and organic phase will be used. The speciation of the actinides in the aqueous and organic phase will be determined by a number …

Inside Unlv, Gian Galassi, Jennifer Vaughan, Carol C. Harter, Richard Flaherty, Rebecca Mills

Inside UNLV

No abstract provided.

Involving Undergraduate And High School Students In Research: Opportunities, Challenges, And Rewards, Shashi S. Nambisan

Civil and Environmental Engineering and Construction Faculty Research

Historically student involvement in research at Universities and Colleges has primarily revolved around those in graduate programs. However, the NSF’s Research Experience for Undergraduates program and ABET’s evaluation criteria regarding undergraduate participation in research are examples of efforts and initiatives over the last decade to target and include undergraduate students in research efforts. Going one step further would be including high school students in such efforts. This paper summarizes efforts, experiences, and initiatives over the last six years at the UNLV Transportation Research Center to include undergraduate and high school students in research projects and lessons learned from the same …

Design And Analysis Of A Process For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

The goal of this project is to investigate the casting processes for metallic fuels to help design a process that minimizes the loss of the volatile actinide elements from the fuel. The research effort centers on the development of advanced numerical models to assess conditions that significantly impact the transport of volatile actinides during the melt casting process and represents a joint effort between researchers at UNLV and Argonne National Laboratory (ANL). Assessing critical equipment and process variables is required to build a successful system that will operate efficiently.

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The goal of this research project is to provide technical support to process designers working on the development of the fuel cycles for transmutation applications. Detailed process models are developed to better define the impact of fuel choice on the transmuter fuel cycle, including relative process losses, waste generation, and plant capital cost. These process models provide insight regarding required plant size and number of plants needed to mesh with the fuel recycling line. They also determine requirements for automation.

Manufacturing models for large-scale production in a hot cell environment are also developed. Combined, these two models allow the assessment …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion, Clemens Heske

Fuels Campaign (TRP)

The goal of this project is to elucidate the chemical bonding and interface formation of metal fission products with the coating materials used in state-of-the-art TRISO fuel particles. Particular emphasis is placed on an analysis of intermediate chemical phases at the interface, the intermixing/diffusion behavior, and the electronic interface structure as a function of material choice (metal and coating materials), temperature, and external stress. Furthermore, we intend to assess the chemical state of some of the metal fission products. The findings are expected to give valuable information about failure mechanisms of TRISO particles and fission product transport. Secondly, through simulating …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion: 3rd Quarter Report, 2004, Clemens Heske

Fuels Campaign (TRP)

The goal of this project, which started in May 2004, is to elucidate the chemical bonding and interface formation of metal fission products with the coating materials used in state-of-the-art TRISO fuel particles. Particular emphasis is placed on an analysis of intermediate chemical phases at the interface, the intermixing/diffusion behavior, and the electronic interface structure as a function of material choice (metal and coating materials), temperature, and external stress.

In detail, this project is devoted to studying the interface formation of Pd, Ag, and Cs with SiC and pyrolytic carbon. Using the TRISO coating materials and single crystal references as …